Skip to Content

97 Results Found

  • Article
  • Open Access
27 Citations
4,245 Views
27 Pages

Tribo-Mechanical Investigation of Glass Fiber Reinforced Polymer Composites under Dry Conditions

  • Corina Birleanu,
  • Marius Pustan,
  • Mircea Cioaza,
  • Paul Bere and ,
  • Glad Contiu,
  • Mircea Cristian Dudescu and
  • Daniel Filip
  • + 2 authors+ 0 author

19 June 2023

Tribo-mechanical experiments were performed on Glass Fiber Reinforced Polymer (GRFP) composites against different engineering materials, and the tribological behavior of these materials under dry conditions was investigated. The novelty of this study...

(This article belongs to the Special Issue Mechanical Behavior of Polymeric Materials: Recent Trends and Advancements)
  • Review
  • Open Access
23 Citations
6,882 Views
27 Pages

Recent Trends in the Design, Synthesis and Biomedical Applications of Covalent Organic Frameworks

  • Gagandeep Kaur,
  • Dinesh Kumar,
  • Subramanian Sundarrajan,
  • Seeram Ramakrishna and
  • Pawan Kumar

28 December 2022

The most recent and advanced class of crystalline and permeable compounds are covalent organic frameworks (COFs). Due to their exceptional qualities, such as their porous structure, high surface area, strong chemical and thermal stabilities, low dens...

(This article belongs to the Special Issue Biocompatible and Biodegradable Polymers for Medical Applications)
  • Review
  • Open Access
9 Citations
4,268 Views
21 Pages

8 June 2023

The rapid development of advanced material science boosts novel chemical analytical technologies for effective pretreatment and sensitive sensing applications in the fields of environmental monitoring, food security, biomedicines, and human health. I...

(This article belongs to the Section Biosensor Materials)
  • Article
  • Open Access
2 Citations
3,031 Views
13 Pages

LMS/RLS/OCTAVE Vibration Controls of Cold Orbital Forging Machines for Improving Quality of Forged Vehicle Parts

  • Mingzhang Chen,
  • Xinfei Ning,
  • Zijian Zhou,
  • Yuwen Shu and ,
  • Yun Tang,
  • Yang Cao,
  • Xuebing Shang and
  • Xinghui Han
  • + 3 authors+ 0 author

Cold orbital forging (COF) as an advanced incremental metal-forming technology has been widely used in processing vehicle parts. During the COF process, the vibration on the COF machine injures the service life of the machine and the quality of the f...

  • Review
  • Open Access
2 Citations
2,065 Views
37 Pages

19 June 2026

The increasing concentration of atmospheric CO2 has intensified the urgent need for efficient and sustainable carbon capture technologies. Covalent organic frameworks (COFs) have emerged as a highly promising class of porous crystalline materials for...

(This article belongs to the Special Issue Nanostructured Advanced Materials for CO2 Capture and Utilization)
  • Review
  • Open Access
1,958 Views
27 Pages

Insights into Sensing and Biomedical Domains Using Multi-Synthetic Covalent Organic Frameworks

  • Hassan Imam Rizvi,
  • Yuchen Qiao,
  • Shilpa Dabas,
  • Peng Ren and
  • Xuemei Yang

11 May 2026

Covalent organic frameworks (COFs) are one of the most important crystalline structures, having high porosity, and are mostly composed of lighter elements, such as H, C, N, O, etc., with covalent bonds between them. They are chemically synthesized in...

(This article belongs to the Section Biosensor Materials)
  • Review
  • Open Access
13 Citations
6,131 Views
21 Pages

Covalent Organic Framework Membranes for Ion Separation: A Review

  • Yutong Lou,
  • Zhanyong Wang,
  • Wanbei Yang,
  • Shuchen Lang and ,
  • Jiaxing Fan,
  • Qiaomei Ke,
  • Rui Wang,
  • Zhen Zhang,
  • Wentao Chen and
  • Jian Xue
  • + 5 authors+ 0 author

Covalent organic framework (COF) membranes have garnered significant attention in ion separation due to their high surface area, tunable pore size, excellent stability, and diverse functional groups. Over the past decade, various synthesis methods, s...

(This article belongs to the Section Membrane Applications for Water Treatment)
  • Review
  • Open Access
61 Citations
15,529 Views
55 Pages

Metal and Covalent Organic Frameworks for Membrane Applications

  • Mingyuan Fang,
  • Carmen Montoro and
  • Mona Semsarilar

Better and more efficient membranes are needed to face imminent and future scientific, technological and societal challenges. New materials endowed with enhanced properties are required for the preparation of such membranes. Metal and Covalent Organi...

(This article belongs to the Special Issue Membranes: 10th Anniversary)
  • Review
  • Open Access
41 Citations
7,660 Views
31 Pages

23 June 2021

Global population growth and water resource scarcity are significant social problems currently being studied by many researchers focusing on finding new materials for water treatment. The aim is to obtain quality water suitable for drinking and indus...

(This article belongs to the Special Issue Preparation and Characterization of Nanomaterials with Multifunctional Properties)
  • Review
  • Open Access
131 Citations
26,943 Views
37 Pages

Covalent Organic Frameworks: Synthesis, Properties and Applications—An Overview

  • Tiago F. Machado,
  • M. Elisa Silva Serra,
  • Dina Murtinho,
  • Artur J. M. Valente and
  • Mu. Naushad

22 March 2021

Covalent Organic Frameworks (COFs) are an exciting new class of microporous polymers with unprecedented properties in organic material chemistry. They are generally built from rigid, geometrically defined organic building blocks resulting in robust,...

(This article belongs to the Special Issue Hybrid Polymer Materials for Water Purification and Wastewater Treatment)
  • Feature Paper
  • Article
  • Open Access
554 Views
13 Pages

Weavable and Robust Covalent Organic Framework Composite Yarns via Conjugated Electrospinning for Enhanced Dye Adsorption

  • Yuanyuan Shang,
  • Jie Zhao,
  • Yuanyuan Chen,
  • Wenjing Dou and ,
  • Yaqing Wang,
  • Yuanyuan Wu,
  • Fei Gao,
  • Juanjuan Li and
  • Baohui Shi
  • + 4 authors+ 0 author

30 July 2026

Covalent Organic Frameworks (COFs) are renowned for their high crystallinity and tailored porosity, yet their intractable powder form and poor processability severely limit practical deployment. While electrospun nanofiber membranes offer a pathway t...

(This article belongs to the Special Issue Mechanical, Wear, and Functional Properties of Composite Coatings)
  • Feature Paper
  • Review
  • Open Access
8 Citations
3,809 Views
57 Pages

Engineered Covalent Organic Frameworks with Green Future for Environmentally Sustainable Production of Hydrogen Peroxide: A Critical Review

  • Abdulhaleem Abdulkareem Ahmad,
  • Ruimin Chu,
  • Yanqiu Li,
  • Xiao Wang and ,
  • Ling Li and
  • Peng Zhang
  • + 1 author+ 0 author

3 November 2025

Hydrogen peroxide (H2O2) is a vital chemical with extensive applications in industries such as agriculture, pharmaceuticals, textiles, water treatment, and food preservation. However, traditional production methods, particularly the anthraquinone pro...

(This article belongs to the Special Issue Photo(electro)catalysts Green Chemistry, Environmental Pollution, and Energy Applications)
  • Article
  • Open Access
10 Citations
2,694 Views
12 Pages

31 October 2024

Rapidly escalating energy demands have spurred a relentless quest for innovative materials and methodologies in energy storage technologies. Covalent organic frameworks (COFs) have emerged as promising candidates for energy storage applications owing...

(This article belongs to the Section Gel Chemistry and Physics)
  • Article
  • Open Access
24 Citations
5,823 Views
10 Pages

31 December 2021

Friction control is a vital technology for reaching sustainable development goals, and surface texturing is one of the most effective and efficient techniques for friction reduction. This study investigated the performance of a micro-dimpled texture...

(This article belongs to the Section D: Materials and Processing)
  • Article
  • Open Access
6 Citations
3,215 Views
16 Pages

Tribological Performance of a Plasma Electrolytic Oxidation-Coated Mg Alloy in Graphene-Incorporated Ethanol

  • Sukanta Bhowmick,
  • Faiz Muhaffel,
  • Shayan Shirzadian,
  • Huseyin Cimenoglu and
  • Ahmet T. Alpas

This study investigated the friction and wear characteristics of a plasma electrolytic oxidation (PEO)-coated Mg–Al alloy (AZ31) in sliding contact against steel using graphene nanoplatelets (GNPs) containing ethanol as a lubricant. The results...

  • Article
  • Open Access
5 Citations
3,497 Views
11 Pages

Metal Imidazole-Modified Covalent Organic Frameworks as Electrocatalysts for Alkaline Oxygen Evolution Reaction

  • Meng Xia,
  • Xinxin Yu,
  • Zhuangzhuang Wu,
  • Yuzhen Zhao and ,
  • Lijuan Feng and
  • Qi Chen
  • + 1 author+ 0 author

27 October 2024

Since the product contains no carbon-based substances and can be driven by non-carbon-based electricity, electrocatalytic water splitting is considered to be among the most effective strategies for alleviating the energy crisis and environmental poll...

(This article belongs to the Special Issue Porous Organic Materials: Design and Applications: Volume II)
  • Review
  • Open Access
39 Citations
9,906 Views
23 Pages

Porphyrin-Based Covalent Organic Frameworks: Design, Synthesis, Photoelectric Conversion Mechanism, and Applications

  • Xiaoyu Li,
  • Chuanyin Tang,
  • Li Zhang,
  • Mingyang Song and ,
  • Yujie Zhang and
  • Shengjie Wang
  • + 1 author+ 0 author

Photosynthesis occurs in high plants, and certain organisms show brilliant technology in converting solar light to chemical energy and producing carbohydrates from carbon dioxide (CO2). Mimicking the mechanism of natural photosynthesis is receiving w...

  • Review
  • Open Access
9 Citations
5,266 Views
26 Pages

Recent Developments in the Use of Covalent Organic Frameworks for Photocatalytic Water Decontamination

  • Víctor Cepa-López,
  • Miguel Sánchez-Fuente,
  • Alicia Moya and
  • Rubén Mas-Ballesté

Water pollution by persistent organic and inorganic contaminants constitutes a significant problem for ecosystems and public health. Organic substances such as dyes, pharmaceutical residues, pesticides, and phenolic compounds are increasingly detecte...

(This article belongs to the Section Inorganic Solid-State Chemistry)
  • Feature Paper
  • Article
  • Open Access
8 Citations
3,078 Views
12 Pages

26 October 2024

Catalytic technologies are pivotal in enhancing energy efficiency, promoting clean energy production, and reducing energy consumption in the chemical industry. The pursuit of novel catalysts for renewable energy is a long-term goal for researchers. I...

(This article belongs to the Section Organic Chemistry)
  • Review
  • Open Access
11 Citations
2,546 Views
40 Pages

16 November 2025

Electrochemiluminescence (ECL) has evolved into a powerful analytical technique due to its ultra-high sensitivity, low background noise, and precise electrochemical control. The development of efficient ECL emitters is central to advancing this techn...

(This article belongs to the Special Issue Progress in Electrochemiluminescence Biosensors)
  • Article
  • Open Access
26 Citations
6,454 Views
14 Pages

21 November 2021

The coating materials commonly used in hydrodynamic bearings are the so-called “Babbitt metals” or “white metals”, as defined by ASTM B23-00. Their low Young’s modulus and yield point have encouraged researchers to find new coatings to overcome these...

(This article belongs to the Special Issue Design for Tribology: Theoretical and Practical Assessment in Modern Mechanical Components)
  • Article
  • Open Access
16 Citations
3,333 Views
14 Pages

COF-SiO2@Fe3O4 Composite for Magnetic Solid-Phase Extraction of Pyrethroid Pesticides in Vegetables

  • Ling Yu,
  • Aiqing Xia,
  • Yongchao Hao,
  • Weitao Li and ,
  • Xu He,
  • Cuijuan Xing,
  • Zan Shang and
  • Yiwei Zhang
  • + 3 authors+ 0 author

Pyrethroid pesticides (PYRs) have found widespread application in agriculture for the protection of fruit and vegetable crops. Nonetheless, excessive usage or improper application may allow the residues to exceed the safe limits and pose a threat to...

  • Article
  • Open Access
3 Citations
2,511 Views
19 Pages

Tribological Performance of Direct Metal Laser Sintered 20MnCr5 Tool Steel Countersamples Designed for Sheet Metal Forming Applications

  • Krzysztof Żaba,
  • Marcin Madej,
  • Beata Leszczyńska-Madej,
  • Tomasz Trzepieciński and
  • Ryszard Sitek

6 August 2025

This article presents the results of the tribological performance of 20MnCr5 (1.7147) tool steel countersamples produced by Direct Metal Laser Sintering (DMLS), as a potential material for inserts or working layers of sheet metal forming tools. Tribo...

(This article belongs to the Special Issue Additive Manufacturing and Machining Technologies for Engineering Materials)
  • Article
  • Open Access
11 Citations
2,605 Views
20 Pages

From Experimentation to Optimization: Surface Micro-Texturing for Low-Friction and Durable PTFE–Steel Interfaces Under Full Film Lubrication

  • Risheng Long,
  • Jincheng Hou,
  • Yimin Zhang,
  • Qingyu Shang and ,
  • Chi Ma,
  • Florian Pape and
  • Max Marian
  • + 2 authors+ 0 author

17 December 2024

To enhance the sliding tribological performance between PTFE and 40#steel (AISI 1040) under full film lubrication conditions, laser surface texturing (LST) technology was employed to prepare micro-dimples on the contact surfaces of 40# steel discs. T...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
7 Citations
2,508 Views
14 Pages

Metal 3D-Printed Bioinspired Lattice Elevator Braking Pads for Enhanced Dynamic Friction Performance

  • Nikolaos Kladovasilakis,
  • Eleftheria Maria Pechlivani,
  • Ioanna K. Sfampa,
  • Konstantinos Tsongas and ,
  • Apostolos Korlos,
  • Constantine David and
  • Dimitrios Tzovaras
  • + 2 authors+ 0 author

5 June 2024

The elevator industry is constantly expanding creating an increased demand for the integration of high technological tools to increase elevator efficiency and safety. Towards this direction, Additive Manufacturing (AM), and especially metal AM, is on...

(This article belongs to the Special Issue Metal Additive Manufacturing: Design, Performance, and Applications)
  • Article
  • Open Access
3 Citations
2,311 Views
17 Pages

11 April 2025

Advanced water treatment technologies must offer selective, efficient, and cost-effective contaminant removal. In this study, TPB-DMTP-COF-SH, prepared from 1,3,5-tris(4-aminophenyl)benzene (TPB) and 2,5-dimethoxyterephaldehyde (DMTP), was synthesize...

(This article belongs to the Section Inorganic Materials and Metal-Organic Frameworks)
  • Review
  • Open Access
28 Citations
12,697 Views
14 Pages

30 June 2022

In our currently ageing society, fall prevention is important for better healthy life expectancy and sustainable healthcare systems. While active outdoor walking is recommended as adequate exercise for the senior population, falls due to tripping and...

(This article belongs to the Special Issue Falls: Risk, Prevention and Rehabilitation)
  • Article
  • Open Access
10 Citations
1,969 Views
12 Pages

28 March 2025

The rational design of high-performance catalysts for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is essential for the development of clean and renewable energy technologies, particularly in fuel cells and metal-air batter...

  • Article
  • Open Access
9 Citations
3,414 Views
13 Pages

8 November 2024

Organic solvent nanofiltration (OSN) technology is advantageous for separating mixtures of organic solutions owing to its low energy consumption and environmental friendliness. Covalent organic frameworks (COFs) are good candidates for enhancing the...

(This article belongs to the Section Membrane Applications for Other Areas)
  • Article
  • Open Access
16 Citations
2,332 Views
21 Pages

The Influence of Q & T Heat Treatment on the Change of Tribological Properties of Powder Tool Steels ASP2017, ASP2055 and Their Comparison with Steel X153CrMoV12

  • Jana Escherová,
  • Michal Krbata,
  • Marcel Kohutiar,
  • Igor Barényi and ,
  • Henrieta Chochlíková,
  • Maroš Eckert,
  • Milan Jus,
  • Juraj Majerský,
  • Róbert Janík and
  • Petra Dubcová
  • + 5 authors+ 0 author

20 February 2024

In connection with the growing importance of the efficiency and reliability of tools in industrial sectors, our research represents a key step in the effort to optimize production processes and increase their service life in real conditions. The stud...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
1,657 Views
15 Pages

Carbon Nanotubes–Gr Inspired by Geckos’ Setae Structure with Enhanced Tribological Properties

  • Jing Zhang,
  • Yang Sun,
  • Fengqin Shang,
  • Zihan Yan and ,
  • Jiayu Yao,
  • Binghuan Chen and
  • Hangyan Shen
  • + 2 authors+ 0 author

9 March 2025

The setae structure of geckos’ toes can create a strong adhesion force, allowing geckos to climb almost vertical walls. Inspired by this, carbon nanotubes–graphite (CNTs-Gr) was prepared by microwave technology, where CNTs like the setae...

(This article belongs to the Special Issue Advances in Structural Design and Numerical Modelling of Composite Materials)
  • Article
  • Open Access
25 Citations
3,253 Views
15 Pages

Prediction of Tribological Properties of UHMWPE/SiC Polymer Composites Using Machine Learning Techniques

  • Abdul Jawad Mohammed,
  • Anwaruddin Siddiqui Mohammed and
  • Abdul Samad Mohammed

11 October 2023

Polymer composites are a class of material that are gaining a lot of attention in demanding tribological applications due to the ability of manipulating their performance by changing various factors, such as processing parameters, types of fillers, a...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
6 Citations
4,121 Views
12 Pages

6 January 2021

Metallic and alloyed coatings are used widely in several decorative and technology-based applications. In this work, we selected Sn coatings plated on Cu substrates for joining applications. We employed two different plating baths for the fabrication...

  • Article
  • Open Access
1,062 Views
17 Pages

15 August 2025

Perfluoromethyl vinyl ether (PMVE) has recently emerged as a promising environmentally friendly insulating gas with potential for practical applications in the power industry. When mixed with CO2, the PMVE/CO2 mixture exhibits an elevated liquefactio...

  • Article
  • Open Access
10 Citations
3,989 Views
10 Pages

Direct Electrical Sensing of Iodine Gas by a Covalent Organic Framework-Based Sensor

  • Wanshuang Zhou,
  • Chun Kang,
  • Cong Yu,
  • Zhaojie Cui and
  • Xinbo Wang

14 January 2023

Rapid and highly sensitive detection of iodine gaseous species is crucial as the first response in case of nuclear accidents and nuclear waste clean-up. A robust and user-friendly sensor-based technology that allows online monitoring is highly desira...

(This article belongs to the Section Air Quality)
  • Article
  • Open Access
11 Citations
2,954 Views
11 Pages

Effect of Wet Granulation on Tribological Behaviors of Cu-Based Friction Materials

  • Lekai Li,
  • Jian Zhuang,
  • Tianjian Tong,
  • Jin Tong and ,
  • Xucheng Zhao,
  • Feipeng Cao,
  • Wei Song,
  • Donghai Wang,
  • Yitong Tian and
  • Qifeng Zhang
  • + 7 authors+ 2 authors

26 January 2023

Because of the excellent thermal conduction, corrosion resistance, and tribological properties, copper-based friction materials (CBFMs) were widely used in airplanes, high-speed trains, and wind power generation. With operating speed continuously inc...

(This article belongs to the Special Issue Mechanical and Tribological Properties of Advanced Materials and Coatings)
  • Article
  • Open Access
21 Citations
4,473 Views
23 Pages

Influence of Tool Geometry and Process Parameters on the Properties of Friction Stir Spot Welded Multiple (AA 5754 H111) Aluminium Sheets

  • Danka Labus Zlatanovic,
  • Sebastian Balos,
  • Jean Pierre Bergmann,
  • Stefan Rasche and ,
  • Milan Pecanac and
  • Saurav Goel
  • + 1 author+ 0 author

1 March 2021

Friction stir spot welding is an emerging spot-welding technology that offers opportunities for joining a wide range of materials with minimum energy consumption. To increase productivity, the present work addresses production challenges and aims to...

(This article belongs to the Special Issue Materials under Extreme Conditions: Technologies for CRMs Reduction, Substitution and Recovery)
  • Article
  • Open Access
16 Citations
2,912 Views
18 Pages

Molecular Mechanisms of Phenylpropane-Synthesis-Related Genes Regulating the Shoot Blight Resistance of Bambusa pervariabilis × Dendrocalamopsis grandis

  • Fengying Luo,
  • Peng Yan,
  • Liling Xie,
  • Shuying Li and ,
  • Tianhui Zhu,
  • Shan Han,
  • Tiantian Lin and
  • Shujiang Li
  • + 3 authors+ 0 author

Bambusa pervariabilis × Dendrocalamopsis grandis shoot blight caused by Arthrinium phaeospermum is a fungal disease that has affected a large area in China in recent years. However, it is not clear which genes are responsible for the disease re...

(This article belongs to the Special Issue Molecular Plant–Fungal Interactions)
  • Article
  • Open Access
5 Citations
1,382 Views
14 Pages

Catalytic Conversion of Xylo-Oligomers to Furfural in Pulping Pre-Hydrolysis Liquor Using a Hydroxyl-Functionalized Covalent Organic Framework

  • Kai Zhang,
  • Huanmei Xia,
  • Guangyao Cheng,
  • Peng Gan and ,
  • Yuan Ju,
  • Baozhen Guo,
  • Jingli Yang,
  • Chengcheng Qiao,
  • Jixiang Lin and
  • Jiachuan Chen
  • + 5 authors+ 0 author

18 April 2025

With the rapid development of biorefinery technology, the efficient conversion of lignocellulose into high-value platform chemicals is of great significance for enhancing the value of renewable carbon resources. In this study, a hydroxyl-functionaliz...

(This article belongs to the Section Polymer Chemistry)
  • Article
  • Open Access
33 Citations
5,222 Views
11 Pages

8 November 2018

High hardness and good wear resistance have been revealed for the high-entropy alloy (HEA) system AlCoCrFeNiTi, confirming the potential for surface protection applications. Detailed studies to investigate the microstructure and phase formation have...

(This article belongs to the Collection Spark-Plasma Sintering and Related Field-Assisted Powder Consolidation Technologies)
  • Review
  • Open Access
2 Citations
1,248 Views
33 Pages

Mechanistic and Life-Cycle Framework for Green Nanomaterials in Atmospheric Water Harvesting

  • Noor Al-Sadeq,
  • Johar Amin Ahmed Abdullah,
  • Alberto Romero and
  • Víctor M. Perez-Puyana

31 March 2026

Atmospheric water harvesting (AWH) has been recognized as a promising technology to address global freshwater scarcity in a decentralized manner. Nevertheless, conventional AWH sorbents are often associated with high energy consumption, toxic synthes...

(This article belongs to the Special Issue Eco-Friendly Nanomaterials: Innovations in Sustainable Applications)
  • Review
  • Open Access
11 Citations
4,592 Views
11 Pages

Applications of Polyacetylene Derivatives in Gas and Liquid Separation

  • Manyu Chen,
  • Guangze Hu,
  • Tanxiao Shen,
  • Haoke Zhang and ,
  • Jing Zhi Sun and
  • Ben Zhong Tang
  • + 1 author+ 0 author

18 March 2023

As a low energy consumption, simple operation and environmentally friendly separation method, membrane separation has attracted extensive attention. Therefore, researchers have designed and synthesized various types of separation membrane, such as me...

(This article belongs to the Section Photochemistry)
  • Article
  • Open Access
6 Citations
2,212 Views
16 Pages

Plasma Spraying NiCoCrAlY-Cr2O3-AgMo Coatings: Fabrication and Tribological Mechanisms

  • Yafei Zhao,
  • Yanping Gao,
  • Zhaoyang Zhai,
  • Yanchao Zhang and
  • Dongya Zhang

24 September 2024

The increasing demand for high-performance aircraft engines has led to a greater emphasis being placed on advanced sealing coating technologies. Developing long-life, self-lubricating, and wear-resistant coatings is of significant research value. Thi...

(This article belongs to the Special Issue Wear-Resistance and Corrosion-Resistance Coatings)
  • Article
  • Open Access
10 Citations
3,024 Views
12 Pages

Structure and Wear Performance of a Titanium Alloy by Using Low-Temperature Plasma Oxy-Nitriding

  • Haidong Li,
  • Haifeng Wang,
  • Shijie Wang,
  • Yange Yang and ,
  • Yunsong Niu,
  • Shenglong Zhu and
  • Fuhui Wang
  • + 2 authors+ 0 author

9 May 2023

To solve the problems of high nitriding temperature and long nitriding time with conventional plasma nitriding technologies, a kind of low-temperature plasma oxy-nitriding technology containing two-stage processes with different ratios of N to O was...

(This article belongs to the Special Issue Advances in Coating Materials Research: From Preparation to Application)
  • Review
  • Open Access
118 Citations
20,993 Views
27 Pages

Electrochemical Reduction of CO2: A Review of Cobalt Based Catalysts for Carbon Dioxide Conversion to Fuels

  • Muhammad Usman,
  • Muhammad Humayun,
  • Mustapha D. Garba,
  • Latif Ullah and ,
  • Zonish Zeb,
  • Aasif Helal,
  • Munzir H. Suliman,
  • Bandar Y. Alfaifi,
  • Naseem Iqbal and
  • Habib Ullah
  • + 7 authors+ 2 authors

9 August 2021

Electrochemical CO2 reduction reaction (CO2RR) provides a promising approach to curbing harmful emissions contributing to global warming. However, several challenges hinder the commercialization of this technology, including high overpotentials, elec...

  • Article
  • Open Access
7 Citations
2,846 Views
8 Pages

24 September 2021

The aim of this paper is to find an effective way to reduce the friction and wear of steel. CrCN coating was deposited on AISI 304 stainless steel by magnetron sputtering technology, and the friction and wear properties of the coating under glycerol...

(This article belongs to the Special Issue Application of Coatings in Industry and Means of Transport)
  • Article
  • Open Access
7 Citations
2,074 Views
16 Pages

Parameter Optimization for the Improvement of Tribological Behavior of Textured Tapered Roller Bearings

  • Risheng Long,
  • Qiang Ma,
  • Qingyu Shang,
  • Haiming Wang and ,
  • Ying Yao,
  • Yueyong Wang and
  • Lin Zong
  • + 2 authors+ 0 author

To enhance the operational stability and service life of tapered roller bearings (TRBs), this study investigates the application of surface texturing technology using laser marking to fabricate micro-dimples with controlled diameters and distribution...

  • Article
  • Open Access
4 Citations
2,598 Views
17 Pages

Structure Modulation and Self-Lubricating Properties of Porous TiN–MoS2 Composite Coating Under Humidity–Fluctuating Conditions

  • Tiancheng Ye,
  • Kai Le,
  • Ganggang Wang,
  • Zhenghao Ren and ,
  • Yuzhen Liu,
  • Liwei Zheng,
  • Hui Tian and
  • Shusheng Xu
  • + 3 authors+ 0 author

To improve the friction performance and service life of protective coatings in humidity-fluctuating environments, porous hard titanium nitride (TiN)–molybdenum disulfide (MoS2) composite coatings were prepared by using direct current magnetron...

(This article belongs to the Special Issue Coatings and Lubrication in Extreme Environments)
  • Article
  • Open Access
12 Citations
3,305 Views
19 Pages

Hardness and wear resistance are the requirements of nickel-based superalloys used in gas turbine blades. This study uses laser cladding technology to develop three types of wear-resistant coatings—NiCr-2%hBN, NiCr-12%cBN, and NiCr-2%hBN-12%cBN...

(This article belongs to the Section Lasers, Light Sources and Sensors)
  • Review
  • Open Access
35 Citations
6,488 Views
27 Pages

Frontier Materials for Adsorption of Antimony and Arsenic in Aqueous Environments: A Review

  • Xiaohua Fu,
  • Xinyu Song,
  • Qingxing Zheng,
  • Chang Liu and ,
  • Kun Li,
  • Qijin Luo,
  • Jianyu Chen,
  • Zhenxing Wang and
  • Jian Luo
  • + 4 authors+ 0 author

As highly toxic and carcinogenic substances, antimony and arsenic often coexist and cause compound pollution. Heavy metal pollution in water significantly threatens human health and the ecological environment. This article elaborates on the sources a...

(This article belongs to the Special Issue Adsorption and Catalytic Pollution Control)

of 2