- Article
Three different insulator layers SiNx, SiON, and SiO2 were used as a gate dielectric and passivation layer in AlGaN/GaN metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMT). The SiNx, SiON, and SiO2 were deposited b...
Three different insulator layers SiNx, SiON, and SiO2 were used as a gate dielectric and passivation layer in AlGaN/GaN metal–insulator–semiconductor high-electron-mobility transistors (MIS-HEMT). The SiNx, SiON, and SiO2 were deposited b...
The influence of oxygen–plasma treatment on in situ SiN/AlGaN/GaN MOS high electron mobility transistor with SiO2 gate insulator was investigated. Oxygen–plasma treatment was performed on in situ SiN, before SiO2 gate insulator was deposi...
Silica-bearing magnetite was recognized in the Copiapó Nordeste prospect as the first documented occurrence in Chilean iron oxide–copper–gold (IOCG) deposits. The SiO2-rich magnetite termed silician magnetite occurs in early calcic to potassic altera...
This study proposed an innovative method for growing gate oxide on silicon carbide (SiC), where silicon oxide (SiO2) was fabricated on a deposited Al2O3 layer, achieving high quality gate oxide. A thin Al2O3 passivation layer was deposited via atomic...
The clean technologies of self-cleaning surfaces are expanding rapidly. Highly hydrophobic coatings with strong adhesion, high durability, and dirt-free surfaces have been prepared via sol-gel deposition of SiO2-TiO2-alkylsilane. The influence of the...
Developing advanced thin film materials is the key challenge in high-temperature applications of surface acoustic wave sensor devices. One hundred nanometer thick (Mo-La
The aim of this work was to obtain cobalt nanoparticles through a physical method, which could be formed simultaneously during the Catalytic Chemical Vapour Deposition (CCVD) synthesis of carbon nanotubes, under conditions suitable for both carbon na...
To improve the oxidation resistance of carbon/carbon composites at high temperatures (>1770 K), they were coated with MoSi2-Si3N4/SiC. The slurry and pack cementation methods were adopted to deposit the inner SiC layer and outer MoSi2-Si3N4 layer....
The progression of SiC MOSFET technology from planar to trench structures requires optimized gate oxide layers within the trench to enhance device performance. In this study, we investigated the interface characteristics of HfO2 and SiO2/HfO2 gate di...
The SiO2 generated by low-temperature oxidation of ultra-thin metallic silicon (thickness = 50 nm) film was evaluated for implementation in one-glass-solution capacitive touch-screen panels (OGS-TSPs) on sapphire-based substrates. Our results show th...
This work focuses on developing resistive switching (RS) devices using thermally annealed (TA) SiO2/Si multilayers (ML). Three SiO2/Si bilayers were deposited with an additional 10 nm SiO2 layer as a dielectric barrier layer on top of the ML. The SiO...
This paper presents the preparation of high-quality vanadium dioxide (VO2) thermochromic thin films with enhanced visible transmittance (Tvis) via radio frequency (RF) sputtering and plasma enhanced chemical vapor deposition (PECVD). VO2 thin films w...
SiO2 is one of the most widely used dielectric materials in optical and electronic devices. The Josephson voltage standard (JVS) chip fabrication process has rigorous requirements for the deposition temperature and step-coverage profiles of the SiO2...
Plasma-enhanced atomic layer deposition (PEALD) is a widely used, powerful layer-by-layer coating technology. Here, we present an atomistic simulation scheme for PEALD processes, combining the Monte Carlo deposition algorithm and structure relaxation...
Two-dimensional (2D) periodic micro/nanostructured arrays as SERS substrates have attracted intense attention due to their excellent uniformity and good stability. In this work, periodic hierarchical SiO2 nanopillar arrays decorated with Ag nanoparti...
Antireflection (AR) coatings are indispensable in numerous optical applications and are increasingly demanded on highly curved optical components. In this work, optical thin films of SiO2, Al2O3, TiO2 and Ta2O5 were prepared by atomic layer depositio...
To address the softening and limited oxidation and water-vapor corrosion resistance of Si bond coats at ultra-high temperatures, Si and Si–15 mol% HfO2 (denoted 15HS) composite bond coats were deposited on pressureless sintered SiC substrates b...
Thick dielectric SiO2 shells on the surface of iron particles enhance the thermal and electrodynamic parameters of the iron. A technique to deposit thick, 500-nm, SiO2 shell to the surface of carbonyl iron (CI) particles was developed. The method con...
Silicon (Si) films were deposited on low-cost graphite substrates by the electrochemical reduction of silicon dioxide nanoparticles (nano-SiO2) in calcium chloride (CaCl2), melted at 855 °C. Cyclic voltammetry (CV) was used to analyze the electro...
Fluidic self-assembly is a versatile on-chip integration method. In this scheme, a large number of semiconductor microchips are spontaneously deposited onto a host chip. The host chip typically comprises a Si substrate with an array of pockets at the...
To tackle the environmental challenges associated with industrial oily wastewater discharges and recurrent marine oil spill incidents, developing high-efficiency oil–water separation technologies represents a pressing environmental challenge. T...
In this study, the structural integrity of mullite (3Al2O3·2SiO2) films, deposited on silicon carbide (SiC) substrates using chemical vapor deposition (CVD), was investigated via increasing load nanoscratch tests. The films were configured by...
A silicon dioxide/polytetrafluoroethylene/polyethyleneimine/polyphenylene sulfide (SiO2/PTFE/PEI/PPS) composite filter medium with three-dimensional network structures was fabricated by using PPS nonwoven as the substrate which was widely employed as...
Functionalized Fe nanoparticles (NPs) have played an important role in biomedical applications. In this study, metallic Fe NPs were deposited on SiO2 spheres to form a Fe/SiO2 composite. To protect the Fe from oxidation, a thin SiO2 layer was coated...
During the service life of karst tunnels, groundwater containing Ca2+ and CO32− can migrate along the shotcrete–surrounding rock interface and induce calcite deposition, thereby changing the interfacial material composition and load trans...
We investigated the effect of film thickness d on the acoustic response of titanium dioxide (TiO2) layers deposited on Ti, SiO2, Al2O3, and Si substrates. For each TiO2 thickness–substrate pair, we computed reflection coefficients and acoustic...
Superparamagnetic iron oxide nanoparticles (SPIONs) are promising drug delivery carriers and hyperthermia agents for the treatment of cancer. However, to ensure their safety in vivo, SPIONs must be modified in order to prevent unwanted iron release....
To reduce the built-in positive charge value at the silicon-on-sapphire (SOS) phase border obtained by bonding and a hydrogen transfer, thermal silicon oxide (SiO2) layers with a thickness of 50–310 nm and HfO2 layers with a thickness of 20 nm...
A seven-layer broadband antireflection coating consisting of Al2O3, TiO2, SiO2, and MgF2 was designed and deposited on both sides of K9 glass for the 400–1100 nm range. The deposition parameters for TiO2 and SiO2 single layers were optimized, a...
The super-growth approach for carbon nanotubes synthesis is frequently used to boost the growth rate, catalyst lifespan, and height of vertically aligned carbon nanotubes. The elimination of amorphous carbon from catalyst particles, commonly made of...
The barrier properties and diffusion behavior of Cu(Re) alloy films were studied. The films were deposited onto barrierless SiO2/Si by magnetron sputtering. X-ray diffraction patterns and electric resistivity results proved that the Cu(Re) alloy film...
The photo-induced effects on sol–gel-based organo TiO2-SiO2 thin layers deposited by the dip-coating technique have been investigated using two very different light sources: A light-emitting diode (LED) emitting in the UV (at 365 nm, 3.4 eV) an...
Transparent materials in contact with harmful environments such as sandstorms are exposed to surface damage. Transparent MgAl2O4 spinel used as protective window, lens or laser exit port, among others, is one of the materials affected by natural aggr...
This study proposes a two-photomask process for fabricating amorphous indium–gallium–zinc oxide (a-IGZO) thin-film transistors (TFTs) that exhibit a self-aligned structure. The fabricated TFTs, which lack etching-stop (ES) layers, have undamaged a-...
SiO2 has been extensively studied as a superior insulating layer for innovative Fe-based soft magnetic composites (SMCs). During the preparation process of SMCs, appropriate heat treatment can effectively alleviate internal stress, reduce dislocation...
The purpose of this study resides in the design and deposition of several types of bioactive interfaces with complex composition, targeting a superior osseointegration of bone implants. The experimental approach is framed by two oxide systems, SiO2‒C...
Coatings in a Zr-Mo-Si-B-N system were deposited by the magnetron sputtering of ZrB2-MoSi2 targets in argon and nitrogen. The structure of the coatings was investigated using scanning electron microscopy, X-ray diffraction, energy-dispersive spectros...
Bearing in mind the need to develop optimal transition metal oxide-based catalysts for the combustion of volatile organic compounds (VOCs), yolk-shell materials were proposed. The constructed composites contained catalytically active Co3O4 nanopartic...
Optical and mechanical properties of multilayer coatings depend on the selected layer materials and the deposition technology; therefore, knowledge of the performances of thin films is essential. In the present work, titanium dioxide (TiO2) and silic...
The refractive index is one of the most important optical parameters of optical thin films. Optical films with a low refractive index can effectively reduce the residual reflection on the film surface, which is one of the most important parameters pu...
Changes associated to atomic layer deposition (ALD) of SiO2 from 3-aminopropyl triethoxysilane (APTES) and O3, on a nanoporous alumina structure, obtained by two-step electrochemical anodization in oxalic acid electrolyte (Ox sample) are analysed. A...
Multilayer broadband antireflective (AR) coatings consisting of porous layers usually suffers poor functional durability. Based on a quarter-half-quarter multilayer structure, AR coatings with dense SiO2 film as the top layer are designed, and refrac...
In this work, the effect of the defect structure and the parameters of antireflection interference coatings based on alternating layers of Nb2O5/Al2O3 and Nb2O5/SiO2 layers on the laser-induced damage threshold of ZGP crystals under the action of Ho:...
In this study, tin oxide (SnO2) resistive random-access memory (RRAM) thin films were fabricated using the thermal evaporation and radiofrequency and dc frequency sputtering techniques for metal–insulator–metal (MIM) structures. The fabri...
In this work, we theoretically analyze the performance characteristics of a near-field thermophotovoltaic system consisting a Mie-metamaterial emitter and GaSb-based photovoltaic cell at separations less than the thermal wavelength. The emitter consi...
Inorganic gap filling technology is an effective method to improve reliability and heterogeneous integration density in 2.5D and 3D integration. It uses plasma-enhanced chemical vapor deposition (PECVD) to deposit silicon dioxide (SiO2) filler layers...
Vertical graphene (VG) combines the excellent properties of conventional graphene with a unique vertical nanosheet structure, and has shown tremendous promise in the field of electronics and composites. However, its complex surface morphology brings...
In this study, we report the isolation of cellulose nanocrystals (CNCs) from Isora plant fibers by sulfuric acid hydrolysis and their assembly on hydrophilic cellulose and silicon-di-oxide (SiO2) surfaces via a layer-by-layer (LBL) deposition method....
In this work a plasmonic sensor with a D-Shaped microstructured optical fiber
In this article, the TiO2/SiO2-np nanocomposite multilayer films were synthesized in a single step by reactive magnetron sputtering combined with a nanoparticle aerosol jet. The SiO2 nanoparticles (SiO2-np) were introduced into a growing TiO2 thin fi...
of 14