We investigated a novel natural dye-sensitized solar cell (DSSC) utilizing gadolinium ruthenate pyrochlore oxide Gd2Ru2O7 (GRO) as a photoanode and compared its performance to the TiO2-Gd2Ru2O7 (TGRO) combined-layer configuration. The films were fabr...
A novel active Ca-Co dually-doping pyrochlore oxide La2−xCaxSn2−yCoyO7 catalyst was synthesized by the sol-gel method for catalytic oxidation of soot particulates. The microstructure, atomic valence, reduction, and adsorption performance...
High-entropy ceramics have gained wider attention due to their structural integrity and stability, which can be used in various functional applications. Especially, high-entropy oxides exhibit excellent thermal stability, particularly at high tempera...
A versatile synthesis method for pyrochlore oxides containing Ir and Ru with lanthanides Pr, Nd, Eu, Gd, Tb, and Ho is herein presented. Based on the systematic synthesis and Rietveld refinement results, the lattice constants were tunable depending o...
A Kene–Mele-type nearest-neighbor tight-binding model on a pyrochlore lattice is known to be a topological insulator in some parameter region. It is an important task to realize a topological insulator in a real compound, especially in an oxide...
The purpose of the article is to elucidate the conditions and mechanism of crystallization of W-Fe oxide minerals with a pyrochlore-type structure (formerly ferritungstite, now elsmoreite group minerals) based on (1) a study of representative samples...
Using a first-principles electronic band calculation, we obtained a quasi flat-band near the Fermi level for the six pyrochlore oxides, A2B2O7. These quasi flat-bands are mostly characterized by the s-orbitals of the A-site. The band structures of th...
High-performance photovoltaic devices require active photoanodes with superior optoelectric properties. In this study, we synthesized neodymium ruthenate, Nd2Ru2O7 (NRO), and gadolinium ruthenate pyrochlore oxides, Gd2Ru2O7 (GRO), via the solid-state...
Graft copolymerization of methyl methacrylate onto cod collagen was carried out under visible light irradiation (λ = 400–700 nm) at 20–25 °C using the RbTe1.5W0.5O6, CsTeMoO6, and RbNbTeO6 complex oxides with β-pyrochlore...
A first-principles calculation based on DFT investigations on the structural, optoelectronic, and thermoelectric characteristics of the newly designed pyrochlore oxides La2Tm2O7 (Tm = Hf, Zr) is presented in this study. The main quest of the research...
Three newly designed pyrochlore oxides, Eu2Tm2O7 (Tm = Hf, Sn, Zr), are analyzed for their magnetic, optical and electronic properties using ab-initio calculations within the context of density functional theory (DFT). We can refer these compounds as...
The oxidative coupling of methane (OCM) to C2 hydrocarbons (C2H4 and C2H6) has aroused worldwide interest over the past decade due to the rise of vast new shale gas resources. However, obtaining higher C2 selectivity can be very challenging in a typi...
Pyrochlore oxides (
Although fast-paced ongoing industrial growth, on the one hand, enhances the lifestyle of the population, on the other hand, it affects human health and the environment as a result of the discharge of pollutants. To address this, designing a novel an...
Thermal barrier coatings (TBCs) require materials with intrinsically low thermal conductivity and high grain-boundary thermal resistance to maximize the temperature gradient across the top coat. In this work, the effective thermal conductivity of mor...
This study presents the successful synthesis of a cesium–nickel–vanadium fluoride (CsNiVF6) pyrochlore nano-sheet catalyst via solid-phase synthesis and its electrochemical performance in green hydrogen production through urea electrolysi...
Complex antimony pyrochlores Bi2.7M0.46Ni0.70Sb2O10+Δ (M = Zn, Mg) were synthesized from oxide precursors, using the solid-state reaction method. For each composition variant, the pyrochlore phase formation process was studied during solid-stat...
Composites of (1-x)Gd2Zr2O7·xMgO were prepared by mixing gadolinium zirconate with freshly precipitated Mg(OH)2 followed by heat treatment at 1500 °C. Small concentrations of magnesium oxide dissolved in the complex oxide matrix of Gd2Zr2O...
The phase formation process of Bi2Cr1/6Mn1/6Fe1/6Co1/6Ni1/6Cu1/6Nb2O9+Δ containing 3d-ions of transition elements in equimolar quantities was studied in a wide temperature range (400–1050 °C). The complex oxide crystallizes in the str...
The design of new oxygen- and proton-conducting materials is of paramount importance for their possible utilization in solid oxide fuel cells. In the present work, La2(Hf2–xLax)O7–x/2 (x = 0, 0.1) ceramics were prepared using ball milling...
Previous geochemical and petrological studies have concluded that initially magmatic Nb–Ta mineralization is often modified by post-magmatic hydrothermal fluids; however, there is still a lack of mineralogical evidence for the syenite-related Nb–Ta d...
Synthesis and study of materials based on bismuth cerates and titanates were carried out. Complex oxides Bi1.6Y0.4Ti2O7 were synthesized by the citrate route; Bi2Ce2O7 and Bi1.6Y0.4Ce2O7—by the Pechini method. The structural characteristics of...
Niobium (Nb) and tantalum (Ta) are quoted as “strategic” or “critical” elements for contemporaneous society. The main sources of Nb and Ta are minerals of the pyrochlore supergroup (PSGM) and the columbite group (CGM) mined fr...
In the paper, a novel technique for highly dispersed pyrochlore Y2Ti2O7 is proposed. The experimental results proved that the application of microwave irradiation at a certain stage of calcination allowed synthesizing of Y2Ti2O7 in much shorter time,...
Pyrochlore Bi1.8Mn0.5Ni0.5Ta2O9-Δ (sp.gr. Fd-3m, a = 10.5038(9) Å) was synthesized by the solid-phase reaction method and characterized by vibrational and X-ray spectroscopy. According to scanning electron microscopy, the ceramics are cha...
The low recovery (∼50%) in industrial pyrochlore flotation highlights the need for optimization. This study evaluates the influence of surface tension (
Ceramics samples with the nominal composition [(ZrO2)0.95(Y2O3)0.05]1-x[PrOy]x and praseodymia contents of x = 0.05–0.15 were prepared by the direct firing of compacted 5YSZ + PrOy mixtures at 1450–1550 °C for 1–9 h and characterized for prospective...
The possibility of high-temperature solid-phase synthesis of Ni-doped bismuth tantalate pyrochlore, not only from the oxide compounds BiTaO4 and NiO but also using nickel chloride NiCl2 as a precursor, was shown for the first time. The concentration...
The effect of Zn-doping on the phase composition and optical properties of the Bi2ZnxFe1-xTa2O9.5-Δ (x = 0.3, 0.5, 0.7) was studied. XRD data showed that the samples crystallize in the structural type of pyrochlore (sp. gr.Fd-3m). For all the samples...
Two series of the bismuth tantalate pyrochlore samples, codoped with Mg,Mn and Zn,Mn, were synthesized via solid-phase reaction. It was established that the Bi2Mg(Zn)xMn1−xTa2O9.5−Δ (x = 0.3; 0.5; 0.7) samples contain the main phase...
This article reviews recent achievements on the crystal growth of a new series of pyrochlore oxides—lanthanide zirconates, which are frustrated magnets with exotic magnetic properties. Oxides of the type
A cubic pyrochlore with the composition Bi1.865Co1/2Fe1/2Ta2O9+Δ (space group Fd-3m, a = 10.5013(8) Å) was synthesized from oxide precursors using solid-phase reactions. These ceramics are characterized by a porous microstructure formed b...
The multielement pyrochlore of the composition Bi1.57Mn1/3Cr1/3Cu1/3Nb2O9−Δ (sp. gr. Fd-3m:2, 10.4724 Å) containing transition element atoms—chromium, manganese and copper in equimolar amounts—was synthesized for the fir...
The phase-pure cubic pyrochlore of the Bi2Cr0.5Co0.5Nb2O9+Δ composition can be successfully synthesized by a modified sol–gel method (Pecini method-PM) and a traditional solid-phase method (SPM). A feature of the solid-phase synthesis met...
The pyrochlore phase in ferroelectric and piezoelectric materials is the main obstacle device application due to its poor electrical properties. Especially, the pyrochlore phase is frequently observed in the perovskite-based metal-oxide materials inc...
Ceramic topcoats of thermal barrier coatings (TBCs) make it possible to increase the working temperature of the hot sections of jet engines. Yttria-stabilized zirconia oxide (YSZ) is usually used to protect the turbine blades and vanes against high t...
The crystal structure and physicochemical properties of a new Ni/Zn codoped bismuth antimonite pyrochlore, synthesized by the solid-phase reaction method, were investigated. The most optimal outcomes of Rietveld refinement for Bi2.7Zn0.46Ni0.70Sb2O10...
Materials with pyrochlore structure A2B2O7 have attracted considerable attention owing to their various applications as catalysts, sensors, electrolytes, electrodes, and magnets due to the unique crystal structure and thermal stability. At the same t...
Tm2(Ti2−xTmx)O7−x/2 (x = 0, 0.1, 0.18, 0.28, 0.74) solid electrolytes have been investigated as potential electrolyte materials for solid oxygen fuel cells (SOFCs), operating in the medium temperature range (600–700 °C). The des...
This article is devoted to the geology of titanium-rich varieties of the Petyayan-Vara rare-earth dolomitic carbonatites in Vuoriyarvi, Northwest Russia. Analogues of these varieties are present in many carbonatite complexes. The aim of this study wa...
The formation mechanisms of pyrochlore-type Bi2Co1/2Cr1/2Nb2O9+Δ (space group Fd-3m, a = 10.4838(8) Å), in the temperature range from 400 to 1050 °C were studied by employing X-ray diffraction, scanning electron microscopy and energy-dispersive spect...
In order to establish the effective application of materials in a particular area, it is important to first investigate the physical and chemical properties, such as the crystallinity, structure, and the optical and surface properties. The objective...
Rare earth elements (REEs) are defined as lanthanides with Y and Sc. Rare earth occurrences including the REE-bearing phases and their distributions, measured by rare earth oxides (REOs), in the streams of processing a phosphate ore were determined b...
Silver (Ag) has difficult forming strong bonding with oxides due to its deep d band beneath the Fermi level and completely filled 4d orbital. Thus, it is difficult to fabricate silver-based composites with superior plasticity and processability becau...
Sm2−xCaxZr2O7−x/2 (x = 0, 0.05, 0.1) and Gd2−xCaxZr2O7−x/2 (x = 0.05, 0.1) mixed oxides in a pyrochlore–fluorite morphotropic phase region were prepared via the mechanical activation of oxide mixtures, followed by anneal...
Co doped bismuth magnesium tantalate with a pyrochlore structure (sp. gr. Fd-3m) was synthesized for the first time using the standard ceramic method. Single phase Bi2Mg1−xCoxTa2O9 samples were found to be formed when x < 0.7 in the X-ray ph...
Oxygen and hydrogen mobility are among the important characteristics for the operation of solid oxide fuel cells, permselective membranes and many other electrochemical devices. This, along with other characteristics, enables a high-power density in...
A groundbreaking photocatalytic nanomaterial, Dy2NdSbO7, was fabricated smoothly using the hydrothermal synthesis technique for the first time. Apart from that, Dy2NdSbO7/Bi2WO6 heterojunction photocatalyst (DBHP) was initially fabricated using the s...
Oxide dispersion-strengthened materials are reinforced by a (Y, Ti, O) nano-oxide dispersion and thus can be considered as nanostructured materials. In this alloy, most of the nanoprecipitates are (Y, Ti, O) nano-oxides exhibiting a Y2Ti2O7 pyrochlor...
A selection of 10 Chinese enamelled metal wares dating from the 17th–18th centuries (Qing Dynasty) was analysed on-site by mobile Raman microspectroscopy. These wares display cloisonné and/or painted enamels and belong to the collections...
of 2