- Article
This paper investigates air–water two-phase flow regimes in a horizontal T-junction mini-channel with a 1 × 1 mm2 main mini-channel and a 0.3 × 0.3 mm2 side channel. The resulting cross-sectional area ratio of about 11:1 lies outsid...
This paper investigates air–water two-phase flow regimes in a horizontal T-junction mini-channel with a 1 × 1 mm2 main mini-channel and a 0.3 × 0.3 mm2 side channel. The resulting cross-sectional area ratio of about 11:1 lies outsid...
Understanding how methane moves through nanoporous media is key to predicting performance in unconventional gas reservoirs. At these extremely small scales, pore sizes approach the molecular level, where classical flow assumptions begin to fail and m...
Although most lotic ecosystems are groundwater dependent, our knowledge on the relatively long-term ecological effects of groundwater discharge on downstream reaches remains limited. We surveyed four connected reaches of a Chinese karst stream networ...
This paper studies the evaporative heat transfer characteristics of R744 at low temperatures in a horizontal smooth tube as a cascade refrigeration system (CRS) among hybrid cascade refrigeration systems (HCRSs). There is a lack of research on the lo...
In this study, the evaporation heat transfer characteristics of an intermediate temperature of R744 in a smooth horizontal tube, when operating as an indirect refrigeration system (IRS) among hybrid cascade refrigeration systems (HCRSs), are evaluate...
This paper reports the results of a study concerned with air−water and air−oil two–phase flow pattern analysis in the channels with open–cell metal foams. The research was conducted in a horizontal channel with an internal dia...
We investigated the conditions, characteristics, and outcomes of liquid droplet interaction in the gas medium using video frame processing. The frequency of different droplet collision outcomes and their characteristics were determined. Four interact...
The temperature of rarefied gas flows inside small channels is hard to measure without disturbing the flow. We present here an optical approach with submillimeter spatial resolution, based on Raman spectroscopy, and several examples of its applicatio...
A flow visualization study was carried out for flow boiling in a rectangular channel filled with and without metallic random porous media. Four main flow patterns are observed as intermittent slug-churn flow, churn-annular flow, annular-mist flow, an...
Understanding how natural variation in flow regimes influences stream ecosystem structure and function is critical to the development of effective stream management policies. Spatial variation in flow regimes among streams is reasonably well understo...
Owing to their simple construction, cost effectiveness, and high thermal efficiency, pulsating heat pipes (PHPs) are growing in popularity as cooling devices for electronic equipment. While PHPs can be very resilient as passive cooling systems, their...
The response of an elastically mounted circular cylinder vibrating in an oscillatory flow oblique to the flow direction is investigated. Simulations are conducted for vibration angles ranging from 0° to 90°, with 0° and 90° correspond...
The focus of this work is to examine the effect of flow rate ratio (quotient of the dispersed phase flow rate over the continuous phase flow rate) on a regime transition from squeezing to dripping at constant capillary numbers. The effect of the flow...
This study focused on gas/Newtonian and gas/non-Newtonian two-phase horizontal fluid flow behavior by analyzing their flow regime identification and flow structural analysis on a horizontal flow loop apparatus. This involved the recognition of two-ph...
Hydrodynamics plays a major role in transport of heat and mass transfer in microchannels. This includes flow patterns and flow regimes in which the micro-channels are operated. The flow patterns have a major impact the transport properties. Another i...
Objective neural network-based two-phase flow regime classifiers are developed for vertical, narrow, rectangular channels and a 1 inch round pipe using Kohonen Self-Organizing Maps. In the rectangular channel, the classifier uses five geometric input...
In the paper, a self-organizing map combined with the recurrence quantification analysis was used to identify flow boiling patterns in a circular horizontal minichannel with an inner diameter of 1 mm. The dynamics of the pressure drop during density-...
13 October 2023
This paper aims to summarize the results of several experimental investigations regarding two-phase liquid–gas flows in radial centrifugal pumps. The main objective is to combine the corresponding experimental results and collect the obtained k...
This work investigates the impact of fluid (CO2(g), water) flow rates, channel geometry, and the presence of a surfactant (ethanol) on the resulting gas–liquid flow regime (bubble, slug, annular), pressure drop, and interphase mass transfer coe...
This paper deals with active control of a continuous jet issuing from a long pipe nozzle by means of a concentrically placed annular synthetic jet. The experiments in air cover regimes of laminar, transitional, and turbulent main jet flows (Reynolds...
Previous multiphase pipe flow tests have mainly been conducted in horizontal and vertical pipes, with few tests conducted on multiphase pipe flow under different inclined angles. In this study, in light of mid–high yield and highly deviated wel...
The continuous separation and filtration of particles immersed in fluid flows are important interests in various applications. Although the inertial focusing of particles suspended in a duct flow is promising in microfluidics, predicting the focusing...
Floodplain wetlands are among the most dynamic ecosystems on Earth, featuring high biodiversity and productivity. They are also sensitive to anthropogenic disturbances and are globally threatened. Understanding how flow regime drives the spatiotempor...
Flow regimes of vertical upflow for slightly cohesive Geldart A powders at high solids mass flux (
Pumping in vacuum chambers is part of the field of environmental electron microscopy. These chambers are separated from each other by a small-diameter aperture that creates a critical flow in the supersonic flow regime. The distribution of pressure a...
Microfluidics is a rapidly advancing field focused on optimizing microdevices for applications such as organ-on-a-chip systems and enhancing laboratory analyses. Understanding the physical parameters of droplet generation is crucial for these devices...
Understanding the behaviour of gas–liquid flows in upward and downward pipe configurations in chemical, petroleum, and nuclear industries is vital when optimal design, operation, production, and safety are of paramount concern. Unfortunately, the inf...
The paper presents the results of a study concerned with the hydrodynamics of an annular downward multiphase flow of gas and two mutually non-mixing liquids through a vertical pipe with a diameter of 12.5 mm. The air, oil and water were used as worki...
In the framework of the Multifractal Theory of Motion, which is expressed by means of the multifractal hydrodynamic model, complex system dynamics are explained through uniform and non-uniform flow regimes of multifractal fluids. Thus, in the case of...
In full-scale snow avalanche test sites, structures such as pylons, plates, or dams have been used to measure impact forces and pressures from avalanches. Impact pressures are of extreme importance when dealing with issues such as hazard mapping and...
In this paper, we investigate the impact of diesel and kerosene on the transient processes occurring in a micro-turbojet aviation engine. The experiments were conducted under two distinct ambient temperature conditions, 0 and 20 °C. Specifically,...
The isothermal compression tests of the nickel-based superalloy Waspaloy were carried out under various temperatures from 1040 to 1120 °C and strain rates from 0.01 to 10 s−1 with the height reduction of 60% and the flow stress curves were...
The present review focuses on the recent studies carried out in passive micromixers for understanding the hydrodynamics and transport phenomena of miscible liquid–liquid (LL) systems in terms of pressure drop and mixing indices. First, the pass...
This study investigates wave-stratified flow in a horizontal pipe at high pressure, and flow characteristics are obtained, such as flow pattern map, liquid film thickness, and pressure drop. Compared with a flow pattern map of a gas-liquid two-phase...
This study presents a data-driven approach for generating vortex-shedding maps, which are vital for predicting flow structures in vortex-induced vibration (VIV) wind energy extraction devices, while addressing the computational and complexity limitat...
This article presents the results of flow visualization studies of Novec refrigerants during condensation in minichannels. Experimental investigation of two-phase flow regimes was conducted in minichannels with internal diameter dh = 2.5, 2.0, 1.2, a...
This study investigates the hot deformation behavior of 022Cr12Ni10MoTi alloy over a wide range of strain rates and temperatures. Hot compression experiments were carried out at deformation temperatures ranging from 900 °C to 1200 °C and stra...
(1) Background: Emulsions are multiphase systems in which one liquid is dispersed as droplets within another immiscible liquid. Microspheres prepared using emulsion-based templates have found broad applications in food science, chemical engineering,...
Immiscible liquid–liquid flows in microchannels are used extensively in various chemical and biological lab-on-a-chip systems when it is very important to predict the expected flow pattern for a variety of fluids and channel geometries. Commonly, bio...
Streamflow forecasting is of great significance for water resources planning and management. In recent years, numerous data-driven models have been widely used for streamflow forecasting. However, the traditional single data-driven model ignores the...
Urbanization is known to increase the volume of stormwater runoff and peak flow rates, which leads to changes in the natural flow regime and increases the likelihood of flooding. Low-impact development (LID) practices seek to reduce runoff volume and...
In this study, a comprehensive methodology was adapted to determine the environmental flow regime of “La Yerbabuena”, a temporary stream located in the Aguascalientes Valley, Mexico. The analysis was divided into four stages: the geomorph...
Magnetic drug targeting (MDT) is commonly evaluated by peak accumulation at the target site. Under pulsatile flow, however, initial deposition does not predict sustained localisation. We introduce the Magnetic Targeting Optimisation Concept (M-TOC),...
We investigate and characterize the effect of compressibility and rarefaction on vortex structures in the benchmark lid-driven cavity flow. Direct numerical simulations are performed, employing the unified gas kinetic scheme to examine the changes in...
This work is devoted to an experimental study of the effect of coalescence on the average diameter and velocity of gas bubbles in an inclined pipe. The measurements were carried out for agas flow rate of 3.3 and 5 mL/min at pipe inclination angles of...
In this work, a combined smoothed particle hydrodynamics and discrete element method (SPH-DEM) model was proposed to model particle agglomeration in a shear flow. The fluid was modeled with the SPH method and the solid particles with DEM. The system...
Heat transfer, friction, and thermal performance of perforated flow blockages are measured in a confined rectangular channel (W/H = 9.375, Re = 7700–12,200). Wall temperature fields are measured by thermochromic liquid crystal thermography. Flo...
We propose a theoretical framework based on an affine-eigenstate transformation for analyzing ultracold atom–molecule conversion dynamics with particle loss. The transformation maps the mean-field dynamics to an effective two-mode representatio...
This work examined the effects of secondary annular flow area on flame stability in an experimental diffusion flame burner. The burner was composed of a horizontally mounted, rectangular chamber that utilized a retractable spark plug for ignition and...
Computational fluid dynamics methods range from Reynolds-Averaged Navier–Stokes (RANS) simulations to Direct Numerical Simulations (DNSs). RANS offers low computational cost at the expense of accuracy, while DNS provides high accuracy but at a...
of 4