Skip to Content

103 Results Found

  • Review
  • Open Access
36 Citations
6,834 Views
26 Pages

15 March 2021

This work summarizes the results of our previous studies related to investigations of reactive ion etching kinetics and mechanisms for widely used silicon-based materials (SiC, SiO2, and SixNy) as well as for the silicon itself in multi-component flu...

(This article belongs to the Special Issue Etching Kinetics and Mechanisms of Thin Films)
  • Article
  • Open Access
28 Citations
3,051 Views
19 Pages

Kinetic and Isotherm Study of As(III) Removal from Aqueous Solution by PET Track-Etched Membranes Loaded with Copper Microtubes

  • Alyona V. Russakova,
  • Liliya Sh. Altynbaeva,
  • Murat Barsbay,
  • Dmitriy A. Zheltov and ,
  • Maxim V. Zdorovets and
  • Anastassiya A. Mashentseva
  • + 1 author+ 0 author

6 February 2021

This paper reports on the synthesis and structure elucidation of track-etched membranes (TeMs) with electrolessly deposited copper microtubes (prepared in etched-only and oxidized polyethylene terephthalate (PET) TeMs), as well as on the comparative...

(This article belongs to the Section Membrane Applications)
  • Article
  • Open Access
23 Citations
9,820 Views
18 Pages

17 July 2023

In this work, we discuss the effects of component ratios on plasma characteristics, chemistry of active species, and silicon etching kinetics in CF4 + O2, CHF3 + O2, and C4F8 + O2 gas mixtures. It was shown that the addition of O2 changes electrons-...

(This article belongs to the Special Issue Advances in Plasma and Laser Engineering)
  • Article
  • Open Access
2 Citations
3,433 Views
12 Pages

Mechanism of Improving Etching Selectivity for E-Beam Resist AR-N 7520 in the Formation of Photonic Silicon Structures

  • Ksenia Fetisenkova,
  • Alexander Melnikov,
  • Vitaly Kuzmenko,
  • Andrey Miakonkikh and ,
  • Alexander Rogozhin,
  • Andrey Tatarintsev,
  • Oleg Glaz and
  • Vsevolod Kiselevsky
  • + 3 authors+ 0 author

10 September 2024

The selectivity of the reactive ion etching of silicon using a negative electron resist AR-N 7520 mask was investigated. The selectivity dependencies on the fraction of SF6 in the feeding gas and bias voltage were obtained. To understand the kinetics...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
22 Citations
7,644 Views
16 Pages

24 March 2021

This research work deals with the comparative study of C6F12O + Ar and CF4 + Ar gas chemistries in respect to Si and SiO2 reactive-ion etching processes in a low power regime. Despite uncertain applicability of C6F12O as the fluorine-containing etcha...

(This article belongs to the Special Issue Etching Kinetics and Mechanisms of Thin Films)
  • Feature Paper
  • Article
  • Open Access
9 Citations
5,033 Views
15 Pages

1 December 2020

In this work, we carried out the study of CF4 + O2 + X (X = C4F8 or CF2Br2) gas chemistries in respect to the SiOxNy reactive-ion etching process in a low power regime. The interest in the liquid CF2Br2 as an additive component is motivated by its ge...

(This article belongs to the Special Issue Etching Kinetics and Mechanisms of Thin Films)
  • Article
  • Open Access
13 Citations
3,712 Views
15 Pages

18 May 2022

Barite (Ba[SO4]) is one of the promising candidates for sequestration of radioactive waste. Barite can incorporate radium (Ra) and form ideal solid solutions, i.e., (Ba,Ra)[SO4]. Together with isostructural celestite (Sr[SO4]), ternary solid solution...

(This article belongs to the Special Issue Ion Adsorption at Mineral–Water Interfaces)
  • Article
  • Open Access
1,290 Views
18 Pages

Modulating Reaction Kinetics Using an Electrolytic Method to Achieve Efficient Vehicle Identification Number Reappearance

  • Jintao Wang,
  • Xiaoshun Zhang,
  • Mengfan Chen,
  • Xihao Zhang and ,
  • Zhongliang Zhang and
  • Jianguo Liu
  • + 1 author+ 0 author

Vehicle identification number (VIN) reappearance technology is an important means of vehicle traceability in various criminal cases. However, with the advancement of metallurgical techniques, the corrosion resistance of metal becomes stronger, and th...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
4 Citations
1,857 Views
16 Pages

14 March 2025

This study investigates the acid–rock reaction kinetics and their implications for enhancing tight limestone reservoir stimulation through systematic experiments. Using 14 tight limestone cores, we evaluate the dynamic behavior of single-phase...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
15 Citations
4,189 Views
12 Pages

22 October 2021

High-aspect ratio silicon (Si) nanostructures are important for many applications. Metal-assisted chemical etching (MACE) is a wet-chemical method used for the fabrication of nanostructured Si. Two main challenges exist with etching Si structures in...

(This article belongs to the Special Issue Silica and Silicon Based Nanostructures)
  • Article
  • Open Access
26 Citations
6,908 Views
18 Pages

Development of Virtual Metrology Using Plasma Information Variables to Predict Si Etch Profile Processed by SF6/O2/Ar Capacitively Coupled Plasma

  • Ji-Won Kwon,
  • Sangwon Ryu,
  • Jihoon Park,
  • Haneul Lee and ,
  • Yunchang Jang,
  • Seolhye Park and
  • Gon-Ho Kim
  • + 2 authors+ 0 author

1 June 2021

In the semiconductor etch process, as the critical dimension (CD) decreases and the difficulty of the process control increases, in-situ and real-time etch profile monitoring becomes important. It leads to the development of virtual metrology (VM) te...

(This article belongs to the Special Issue Etching Kinetics and Mechanisms of Thin Films)
  • Article
  • Open Access
817 Views
17 Pages

An Investigation into the Footing Profile Suppression in (110) Si Anisotropic Etching

  • Zhishen Wang,
  • Guoliang Xie,
  • Gaowei Xu,
  • Genzi Li and ,
  • Weihu Zhou,
  • Dongzhi Fu,
  • Lingde Kong,
  • Zhiwen Chen and
  • Sheng Liu
  • + 4 authors+ 0 author

24 April 2026

Deep Si trenches with vertical sidewalls are critical structures in advanced MEMS sensors and microfluidic devices. (110)-oriented Si is specifically required for this purpose, as its crystallographic geometry inherently provides the nearly 90° v...

  • Article
  • Open Access
3 Citations
2,605 Views
11 Pages

Formation of Organic Monolayers on KF-Etched Si Surfaces

  • Tiexin Li,
  • Zane Datson and
  • Nadim Darwish

10 May 2024

Silicon is the most commonly used material in the microelectronics industry, due to its inherent advantages of high natural abundance, low cost, and high purity, coupled with the chemical and electrical stability at the interface with its oxide. For...

  • Article
  • Open Access
15 Citations
8,652 Views
19 Pages

Acetic Acid Etching of Mg-xGd Alloys

  • Marcjanna Maria Gawlik,
  • Björn Wiese,
  • Alexander Welle,
  • Jorge González and ,
  • Valérie Desharnais,
  • Jochen Harmuth,
  • Thomas Ebel and
  • Regine Willumeit-Römer
  • + 3 authors+ 0 author

23 January 2019

Mg-xGd alloys show potential to be used for degradable implants. As rare earth containing alloys, they are also of special interest for wrought products. All applications from medical to engineering uses require a low and controlled degradation or co...

(This article belongs to the Special Issue Magnesium Alloys for Biomedical Applications)
  • Article
  • Open Access
3 Citations
5,307 Views
14 Pages

Optimizing Metallographic Etchants for Ancient Gold and Silver Materials

  • Shengyu Liu,
  • Zisang Gong,
  • Haizi Lu,
  • Wei Zhang and ,
  • Yanru Ma,
  • Xiaolin Yang,
  • Zhenda Xie,
  • Gang Hu and
  • Dongbo Hu
  • + 4 authors+ 0 author

20 July 2022

In recent years, with the excavation of an increasing amount of gold and silver artifacts, there has been an urgent need to optimize the formulations and methods of metallographic etching. Herein, a kinetic control study is performed to investigate t...

(This article belongs to the Section Structural Integrity of Metals)
  • Article
  • Open Access
15 Citations
6,281 Views
25 Pages

Crystal Dissolution Kinetics Studied by a Combination of Monte Carlo and Voronoi Methods

  • Ricarda D. Rohlfs,
  • Cornelius Fischer,
  • Inna Kurganskaya and
  • Andreas Luttge

24 March 2018

Kinetic Monte Carlo (kMC) methods have been used extensively for the study of crystal dissolution kinetics and surface reactivity. A current restriction of kMC simulation calculations is their limitation in spatial system size. Here, we explore a new...

(This article belongs to the Special Issue Molecular Simulation of Mineral-Solution Interfaces)
  • Article
  • Open Access
1,519 Views
15 Pages

24 October 2025

The formation of atomically flat Si(111)–H surfaces was critical for molecular electronics, nanoscale device fabrication, and surface chemistry studies. We systematically investigated how initial oxide composition and dissolved oxygen affected...

(This article belongs to the Collection Featured Articles for Surfaces)
  • Article
  • Open Access
24 Citations
8,176 Views
14 Pages

Reactive Ion Etching of X-Cut LiNbO3 in an ICP/TCP System for the Fabrication of an Optical Ridge Waveguide

  • Andrei Kozlov,
  • Dmitrii Moskalev,
  • Uliana Salgaeva,
  • Anna Bulatova and ,
  • Victor Krishtop,
  • Anatolii Volyntsev and
  • Alexander Syuy
  • + 2 authors+ 0 author

6 February 2023

In this study, the technology for producing ridge waveguides with a minimal roughness of the sidewalls and material surface in a near-waveguide region was developed with the purpose of fabricating miniature photonic integrated circuits on a LiNbO3 su...

(This article belongs to the Section Optics and Lasers)
  • Article
  • Open Access
2 Citations
744 Views
14 Pages

Evolution of Fused Silica Subsurface Damage in Chemical Etching and Its Influence on Surface Loss

  • Xiaoqiang Zhang,
  • Chengkui Zu,
  • Lidong Wang,
  • Xuefu Song and ,
  • Yuancheng Sun,
  • Xiurong Du and
  • Yongchang Zhu
  • + 2 authors+ 0 author

16 April 2026

Mitigating the surface loss induced by subsurface damage is of critical importance in the manufacturing of fused silica devices with ultra-low mechanical loss. Chemical etching technology has been applied as an effective approach in controlling surfa...

(This article belongs to the Section Navigation and Positioning)
  • Article
  • Open Access
10 Citations
2,779 Views
16 Pages

21 February 2024

Porous silicon (PSi) has promising applications in optoelectronic devices due to its efficient photoluminescence (PL). This study systematically investigates the effects of various organic solvents and their concentrations during electrochemical etch...

(This article belongs to the Section Optical and Photonic Materials)
  • Article
  • Open Access
4 Citations
2,479 Views
11 Pages

18 August 2025

The engineering of porous transport layer (PTL)–catalyst layer (CL) interfacial architecture plays a critical role in optimizing the performance of proton exchange membrane water electrolyzers (PEMWEs). Particularly, at the PTL-CL interface, ou...

(This article belongs to the Special Issue Advancements in the Production and Application Technologies of Green Hydrogen Energy)
  • Article
  • Open Access
4 Citations
7,945 Views
18 Pages

Rapid Hydrophilization of Model Polyurethane/Urea (PURPEG) Polymer Scaffolds Using Oxygen Plasma Treatment

  • Rok Zaplotnik,
  • Alenka Vesel,
  • Gregor Primc,
  • Xiangyu Liu and ,
  • Kevin C. Chen,
  • Chiju Wei,
  • Kaitian Xu and
  • Miran Mozetic
  • + 3 authors+ 0 author

15 April 2016

Polyurethane/urea copolymers based on poly(ethylene glycol) (PURPEG) were exposed to weakly ionized, highly reactive low-pressure oxygen plasma to improve their sorption kinetics. The plasma was sustained with an inductively coupled radiofrequency ge...

(This article belongs to the Special Issue Polymers Applied in Tissue Engineering)
  • Article
  • Open Access
4 Citations
2,485 Views
14 Pages

Development of a Simple Electroless Method for Depositing Metallic Pt-Pd Nanoparticles over Wire Gauge Support for Removal of Hydrogen in a Nuclear Reactor

  • Kiran K. Sanap,
  • Sawanta S. Mali,
  • Deepak Tyagi,
  • Ajit N. Shirsat and ,
  • Suhas B. Phapale,
  • Suresh B. Waghmode and
  • Salil Varma
  • + 2 authors+ 0 author

3 October 2023

Electroless noble metal deposition on the conducting substrate is widely used to obtain the desired film or coating on the substrate of interest. Wire-gauge-based Pt/Pd/Pt-Pd (individually, sequentially, and simultaneously deposited) catalysts have b...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
16 Citations
5,546 Views
17 Pages

Rapid Functionalization of Polytetrafluorethylene (PTFE) Surfaces with Nitrogen Functional Groups

  • Alenka Vesel,
  • Rok Zaplotnik,
  • Gregor Primc,
  • Miran Mozetič and ,
  • Tadeja Katan,
  • Rupert Kargl,
  • Tamilselvan Mohan and
  • Karin Stana Kleinschek
  • + 3 authors+ 0 author

9 December 2021

The biocompatibility of body implants made from polytetrafluoroethylene (PTFE) is inadequate; therefore, the surface should be grafted with biocompatible molecules. Because PTFE is an inert polymer, the adhesion of the biocompatible film may not be a...

(This article belongs to the Special Issue Degradation and Biological Application of Polymers)
  • Feature Paper
  • Article
  • Open Access
19 Citations
5,858 Views
17 Pages

14 January 2021

In this article, we focus on the development of a multiscale modeling and recurrent neural network (RNN) based optimization framework of a plasma etch process on a three-dimensional substrate with uniform thickness using the inductive coupled plasma...

(This article belongs to the Special Issue Modeling, Control, and Optimization of Batch and Batch-Like Processes)
  • Article
  • Open Access
4 Citations
4,067 Views
16 Pages

Surface Recombination and Space-Charge-Limited Photocurrent-Voltage (PC-V) Measurements in (Cd,Mn)Te Samples–Kinetics of Photocurrent (PC)

  • Andrzej Mycielski,
  • Dominika M. Kochanowska,
  • Aneta Wardak,
  • Krzysztof Gościński and ,
  • Michał Szot,
  • Witold Dobrowolski,
  • Gabriela Janusz,
  • Małgorzata Górska,
  • Łukasz Janiak and
  • Marek Moszyński
  • + 8 authors+ 3 authors

12 April 2022

Photocurrent-voltage characteristic (PC-V) is a method of determining the critical parameter in X-ray and gamma-ray detector plates, i.e., the carrier mobility-lifetime product, μτ. We show for the (Cd,Mn)Te samples that the measurement result...

(This article belongs to the Section Optical Sensors)
  • Article
  • Open Access
21 Citations
3,835 Views
19 Pages

19 March 2024

In this work, a novel adsorbent called magnetite/MXene (Fe3O4/Ti3C2) nanocomposite was prepared, characterized, and applied for the removal of organic dye, malachite green dye (MG), from both real water and model solutions. Numerous techniques were u...

  • Article
  • Open Access
3 Citations
2,721 Views
12 Pages

31 May 2022

This research utilises a novel heat stage combined with a Zeiss scanning electron microscope to investigate phase changes in iron alloys at temperatures up to 800 ℃ using SE and EBSD imaging. Carbon steel samples with starting structures of fer...

(This article belongs to the Special Issue Materials Characterizations Using In-Situ Techniques)
  • Review
  • Open Access
11 Citations
3,799 Views
16 Pages

Recent Progress in Cellulose Hydrophobization by Gaseous Plasma Treatments

  • Gregor Primc,
  • Alenka Vesel,
  • Rok Zaplotnik,
  • Marija Gorjanc and ,
  • Peter Gselman,
  • Marián Lehocký and
  • Miran Mozetič
  • + 2 authors+ 0 author

12 March 2024

Cellulose is an abundant natural polymer and is thus promising for enforcing biobased plastics. A broader application of cellulose fibers as a filler in polymer composites is limited because of their hydrophilicity and hygroscopicity. The recent scie...

(This article belongs to the Special Issue Natural Polymer Materials: Cellulose, Lignin and Chitosan)
  • Article
  • Open Access
462 Views
21 Pages

Improving the Adsorption Performance of Eriochrome Black T Using Aluminum Oxide Films as a Nanoadsorbent

  • Gustavo Raúl Kramer,
  • Florencia Alejandra Bruera,
  • Carla Yamila Potiliski,
  • Rocío Magalí Bitchatchi and ,
  • Lara Camila Dwojak,
  • Agustina Itatí Nedel,
  • Pedro Darío Zapata and
  • Alicia Esther Ares
  • + 3 authors+ 0 author

28 June 2026

Optimizing industrial wastewater treatment systems requires efficient, cost-effective, and easily adaptable technologies. In this context, adsorption emerges as a promising alternative through the use of advanced nanostructured materials that optimiz...

(This article belongs to the Special Issue Manufacturing and Surface Engineering, 5th Edition)
  • Article
  • Open Access
6 Citations
1,496 Views
18 Pages

Ultrasonic-Assisted K+ Modification of Industrial Hemp Stalk Hydrothermal Biochar for Highly Effective Adsorption of Pb2+

  • Le Liu,
  • Wanjin Yu,
  • Zheren Zhang,
  • Qiyao Li and ,
  • Chun Peng,
  • Kaisheng Wu,
  • Duoduo Liu,
  • Sufang He,
  • Nengsheng Liu and
  • Xiang Li
  • + 5 authors+ 0 author

18 May 2025

Biochar modification represents an effective approach for enhancing adsorption capacity. In the research, industrial hemp straw-derived biochar was synthesized through hydrothermal carbonization coupled with ultrasound-assisted KOH activation, demons...

(This article belongs to the Section Porous Materials)
  • Feature Paper
  • Review
  • Open Access
43 Citations
4,936 Views
12 Pages

4 February 2019

A critical overview of the various parameters, such as annealing atmospheres, pore microstructures, and pore sizes, that are critical in controlling the decomposition kinetics of Ti-based MAX phases is given in this paper. Ti-based MAX phases tend to...

(This article belongs to the Special Issue MAX Phases and MXenes: Synthesis and Applications)
  • Article
  • Open Access
13 Citations
3,055 Views
17 Pages

Stability of Supehydrophobic Layers Formed by Organic Acids on the Surface of Aluminum Alloy 6063

  • Alexey M. Semiletov,
  • Alexander A. Chirkunov,
  • Oleg Yu. Grafov and
  • Yurii I. Kuznetsov

4 October 2022

The paper discusses the possibility of obtaining a uniformly inhomogeneous surface of aluminum alloy 6063 as a result of alkaline etching and laser processing. Further surface treatment with ethanol solutions of octadecylphosphonic (ODPA) and stearic...

(This article belongs to the Collection Feature Paper Collection in Corrosion, Wear and Erosion)
  • Article
  • Open Access
20 Citations
2,877 Views
20 Pages

Eco-Friendly Electroless Template Synthesis of Cu-Based Composite Track-Etched Membranes for Sorption Removal of Lead(II) Ions

  • Liliya Sh. Altynbaeva,
  • Anastassiya A. Mashentseva,
  • Nurgulim A. Aimanova,
  • Dmitriy A. Zheltov and ,
  • Dmitriy I. Shlimas,
  • Dinara T. Nurpeisova,
  • Murat Barsbay,
  • Fatima U. Abuova and
  • Maxim V. Zdorovets
  • + 4 authors+ 0 author

This paper reports the synthesis of composite track-etched membranes (TeMs) modified with electrolessly deposited copper microtubules using copper deposition baths based on environmentally friendly and non-toxic reducing agents (ascorbic acid (Asc),...

(This article belongs to the Section Membrane Applications)
  • Review
  • Open Access
34 Citations
7,905 Views
15 Pages

26 October 2018

Solar water splitting is a promising method for producing renewable fuels. Thermodynamically, the overall water splitting reaction is an uphill reaction involving a multiple electron transfer process. The oxygen evolution reaction (OER) has been iden...

(This article belongs to the Special Issue Photocatalytic Water Splitting)
  • Feature Paper
  • Article
  • Open Access
627 Views
11 Pages

Confining CoFe Alloy Nanocubes Within N-Doped Carbon Shells via Pyrolysis of Phenolic Resin-Coated Etched Prussian Blue Analogs for Efficient Oxygen Evolution

  • Yishan Jiang,
  • Qichao Zhang,
  • Shengyi Huang,
  • Yaopeng Zhang and ,
  • Ying Xu,
  • Wanwan Zhang,
  • Hu Zhou,
  • Lizhi Lian and
  • Yanxin Qiao
  • + 4 authors+ 0 author

20 July 2026

Constructing core–shell structured carbon-coated alloy nanoparticles represents an effective strategy to enhance the electrocatalytic performance. In this work, CoFe-based Prussian blue analogs (PBAs) with hollow structures are firstly coated w...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
14 Citations
5,439 Views
18 Pages

Kinetics of Estonian Phosphate Rock Dissolution in Hydrochloric Acid

  • Ruhany Sheherazad Azeez,
  • Kaia Tõnsuaadu,
  • Tiit Kaljuvee and
  • Andres Trikkel

20 March 2024

The kinetics of the dissolution of Estonian phosphate rock and the governing reaction mechanisms in hydrochloric acid in technological processes were investigated. The influences of particle size and acid concentrations of 0.5–1.5 M on the reac...

(This article belongs to the Section Crystallography and Physical Chemistry of Minerals & Nanominerals)
  • Article
  • Open Access
30 Citations
4,031 Views
12 Pages

15 January 2021

In this study, the use of composite track-etched membranes (TeMs) based on polyethylene terephthalate (PET) and electrolessly deposited silver microtubes (MTs) for the decomposition of toxic phenothiazine cationic dye, methylene blue (MB), under visi...

(This article belongs to the Section Membrane Applications)
  • Article
  • Open Access
10 Citations
2,892 Views
15 Pages

Effective Removal of Methylene Blue on EuVO4/g-C3N4 Mesoporous Nanosheets via Coupling Adsorption and Photocatalysis

  • Xia Ran,
  • Li Wang,
  • Bo Xiao,
  • Li Lei and ,
  • Jinming Zhu,
  • Zuoji Liu,
  • Xiaolan Xi,
  • Guangwei Feng,
  • Rong Li and
  • Jian Feng
  • + 5 authors+ 0 author

2 September 2022

In this study, we first manufactured ultrathin g-C3N4 (CN) nanosheets by thermal etching and ultrasonic techniques. Then, EuVO4 (EV) nanoparticles were loaded onto CN nanosheets to form EuVO4/g-C3N4 heterojunctions (EVCs). The ultrathin and porous st...

(This article belongs to the Special Issue Recent Advances in Synthesis, Characterization and Applications of Innovative Materials in Removal of Water Contaminants)
  • Article
  • Open Access
12 Citations
3,209 Views
23 Pages

CoO, Cu, and Ag Nanoparticles on Silicon Nanowires with Photocatalytic Activity for the Degradation of Dyes

  • Olda Alexia Cárdenas Cortez,
  • José de Jesús Pérez Bueno,
  • Yolanda Casados Mexicano,
  • Maria Luisa Mendoza López and ,
  • Carlos Hernández Rodríguez,
  • Alejandra Xochitl Maldonado Pérez,
  • David Cruz Alejandre,
  • Coraquetzali Magdaleno López,
  • María Reina García Robles and
  • Hugo Ruiz Silva
  • + 7 authors+ 2 authors

17 October 2022

Photocatalytic semiconductors require maintaining stability and pursuing higher efficiencies. The studied systems were silicon nanowires (SiNWs), silicon nanowires with cobalt oxide nanoparticles (SiNWs-CoONPs), and silicon nanowires with copper nano...

(This article belongs to the Special Issue Frontiers in Nanomaterials Utilization in Water Treatment)
  • Article
  • Open Access
815 Views
26 Pages

A Process Systems Engineering Approach to Model and Optimize Cr6+-Free and Pd-Free Plating on Plastics Technologies

  • Konstantinos A. Pyrgakis,
  • Eleni Poupaki,
  • Michalis Kartsinis,
  • Melina Psycha and ,
  • Alexios Grigoropoulos,
  • Dimitrios Zoikis-Karathanasis and
  • Alexandros Zoikis-Karathanasis
  • + 2 authors+ 0 author

9 April 2026

Plating on Plastics (PoP) requires specific surface pre-treatment steps to enable metallization. The conventional PoP industry utilizes hexavalent chromium (toxic, carcinogenic) and palladium (critical raw material) for surface etching and activation...

(This article belongs to the Section Polymer Processing and Engineering)
  • Feature Paper
  • Article
  • Open Access
9 Citations
3,417 Views
11 Pages

Understanding the Interdependence of Penetration Depth and Deformation on Nanoindentation of Nanoporous Silver

  • Yannick Champion,
  • Mathilde Laurent-Brocq,
  • Pierre Lhuissier,
  • Frédéric Charlot and ,
  • Alberto Moreira Jorge Junior and
  • Daria Barsuk
  • + 1 author+ 0 author

14 December 2019

A silver-based nanoporous material was produced by dealloying (selective chemical etching) of an Ag38.75Cu38.75Si22.5 crystalline alloy. Composed of connected ligaments, this material was imaged using a scanning electron microscope (SEM) and focused...

(This article belongs to the Special Issue Trends in Plasticity of Metals and Alloys)
  • Article
  • Open Access
3 Citations
3,968 Views
12 Pages

9 January 2019

The cathode sheath (CS) region is the most important part of abnormal glow discharge (GD), where various processes relevant for the operation and application occur. The most important parameter of the CS is the distribution of electric field strength...

(This article belongs to the Special Issue SPIG2018)
  • Article
  • Open Access
4 Citations
4,445 Views
20 Pages

Chemical Supercritical Fluid Infiltration of Pyrocarbon with Thermal Gradients: Deposition Kinetics and Multiphysics Modeling

  • Gerard L. Vignoles,
  • Gaëtan Talué,
  • Quentin Badey,
  • Alain Guette and ,
  • René Pailler,
  • Yann Le Petitcorps and
  • Laurence Maillé
  • + 2 authors+ 0 author

The chemical supercritical fluid infiltration process is a recent variation of the chemical vapor infiltration (CVI) process that allows rapid and efficient manufacturing of ceramic-matrix composites (CMCs), albeit still needing optimization. This ar...

(This article belongs to the Special Issue Ceramic-Matrix Composites)
  • Article
  • Open Access
16 Citations
8,092 Views
18 Pages

In Situ AFM Study of Crystal Growth on a Barite (001) Surface in BaSO4 Solutions at 30 °C

  • Yoshihiro Kuwahara,
  • Wen Liu,
  • Masato Makio and
  • Keisuke Otsuka

2 November 2016

The growth behavior and kinetics of the barite (001) surface in supersaturated BaSO4 solutions (supersaturation index (SI) = 1.1–4.1) at 30 °C were investigated using in situ atomic force microscopy (AFM). At the lowest supersaturation, the growth be...

(This article belongs to the Special Issue Nucleation of Minerals: Precursors, Intermediates and Their Use in Materials Chemistry)
  • Article
  • Open Access
3 Citations
1,546 Views
14 Pages

Polyoxometalate Etching of NMO@NF for Highly Efficient Oxygen Evolution Reaction in Water Splitting

  • Ting Chen,
  • Xiang Han,
  • Zefen Wang,
  • Chaoying Li and ,
  • Mei Li,
  • Xiongdiao Lan,
  • Yingying Ning,
  • Jingxin Wang and
  • Pengru Liu
  • + 4 authors+ 0 author

In this study, PTA&PMA/NiMoO4@NF was synthesized on nickel foam through wet chemical etching to promote the kinetics of the oxygen evolution reaction (OER) effectively. OER benefits from two cationic (Ni and Mo) defects and the optimized electron...

(This article belongs to the Special Issue Recent Advances in Electrochemical-Related Materials)
  • Article
  • Open Access
4 Citations
2,179 Views
10 Pages

Competitive Growth of Ge Quantum Dots on a Si Micropillar with Pits for a Precisely Site-Controlled QDs/Microdisk System

  • Jia Yan,
  • Zhifang Zhang,
  • Ningning Zhang,
  • Qiang Huang and ,
  • Yan Zhan,
  • Zuimin Jiang and
  • Zhenyang Zhong
  • + 2 authors+ 0 author

12 August 2023

Semiconductor quantum dots (QDs)/microdisks promise a unique system for comprehensive studies on cavity quantum electrodynamics and great potential for on-chip integrated light sources. Here, we report on a strategy for precisely site-controlled Ge Q...

  • Article
  • Open Access
1 Citations
1,140 Views
12 Pages

Detection of Mercury Ions Using Graphene Nanoribbon-DNA Sensors Fabricated via Template Methods

  • Jiaojiao Da,
  • Haixia Shi,
  • Vesna Antic,
  • Milica Balaban and ,
  • Bing Xie and
  • Li Gao
  • + 1 author+ 0 author

To enhance the sensitivity of graphene-DNA sensors for Hg2+ detection, a novel graphene nanoribbon-DNA sensor was fabricated using a template-assisted approach. Silicon nanowires served as templates to decorate the graphene device, followed by plasma...

(This article belongs to the Special Issue Green Electrochemical Sensors for Trace Heavy Metal Detection)
  • Article
  • Open Access
3 Citations
1,622 Views
16 Pages

Toward Coarse and Fine Bimodal Structures for Improving the Plasma Resistance of Al2O3

  • Jeong Hyeon Kwon,
  • I Putu Widiantara,
  • Siti Fatimah,
  • Warda Bahanan and ,
  • Jee-Hyun Kang and
  • Young Gun Ko
  • + 1 author+ 0 author

In the quest to produce high-purity alumina, bottom-up engineering via architecting the interior of ceramic with bimodal structures of alumina powders in the absence of any additives has gained considerable attention owing to the simplicity offered....

  • Article
  • Open Access
5 Citations
5,347 Views
12 Pages

20 January 2017

The electropolishing behaviour of 73 brass was studied by means of a rotating cylinder electrode (RCE) in a 70 vol % H3PO4 solution at 27 °C. Owing to the formation of a blue Cu2+-rich layer on the brass-RCE, an obvious transition peak was detected f...

of 3