The phase change materials (PCMs) used in devices for thermal energy storage (TES) and management are often characterized by low thermal conductivity, a limit for their applicability. Composite PCMs (C-PCM), which combine active phase (proper PCM) wi...
The recent literature has introduced the use of architected materials with a metallic lattice structure-based topology to enhance the thermal conductivity of phase change materials (PCM). The potential of such structures lies in the freedom of design...
For various reasons, many dielectric and electrochemical systems exhibit behavior described by a constant-phase element (CPE) instead of a pure capacitor. However, in many applications, it is desirable to determine the electrical capacitance of such...
The electrochemical reactions of multi-phase metal hydride (MH) alloys were studied using a series of Laves phase-related body-centered-cubic (BCC) Ti15.6Zr2.1V43Cr11.2Mn6.9Co1.4Ni18.5Al0.3X (X = V, B, Mg, Y, Zr, Nb, Mo, La, and Nd) alloys. These all...
The thermal blooming effect of power-exponent-phase vortex (PEPV) beam propagating in the atmosphere is investigated by employing the multiple phase screen method. The influences of propagation distance, topological charge, power exponent, wind speed...
In order to study the inhibition effect of gas–solid two-phase inhibitors on a methane explosion, the influence of these parameters was investigated and compared with that of single-phase inhibitors. The results show that the inhibition effect...
This study investigated the effect of the secondary phases on multi-step phase transitions and the magnetocaloric properties depending on the Ge content in the MnFeCoPSiGe alloys. Two-step phase transitions were observed by the variations of the Fe2P...
We investigate finite-size effects on the density-driven deconfinement phase transition in Quantum Chromodynamics (QCD) using a phase coexistence model of hadronic and quark–gluon plasma (QGP) phases in a finite size. The QGP is described via the MIT...
The role of the geometric phase effect in chemical reaction dynamics has long been a topic of active experimental and theoretical investigations. The topic has received renewed interest in recent years in cold and ultracold chemistry where it was sho...
Phase change memory (PCM) is an important element in the development and realization of new forms of brain-like computing. In this article, a three-dimensional finite element method simulation is carried out to study the temperature profiles within P...
The evaluation of the wave-induced seabed stability such as liquefaction and shear failure is one of the factors that must be considered in the design of marine infrastructures. Due to the transformation within the porous medium, the wave-induced soi...
In oil reservoirs, if oil mainly has wettability in the solid phase, such as in carbonate reservoirs, the medium is oil-wetted. For oil-wetted porous media containing an oil and water two-phase flow, there are electric double layers at both the oil&n...
In order to study the effect of hydrated phase change materials on the suppression of spontaneous combustion in coal, a thermogravimetric experiment and a reaction activation energy analysis experiment were conducted to explore the changes in the com...
In the QCD, a transition restoring the chiral symmetry occurs at a high temperature and density. Searching for the signals of the QCD phase transition is one of the goals of the current relativistic heavy-ion physics programs. The metastable state is...
This study examines the behavior of Rayleigh waves propagating through a homogeneous, isotropic material, analyzed using a three-phase-lag thermoelastic diffusion framework enhanced by modified couple stress theory. The mathematical model integrates...
Factors such as mechanical deformation and temperature changes lead to phase mismatch in optical parametric amplification systems, impacting energy stability. A phase compensation method via the linear electro-optic effect can overcome this limitatio...
Use of the morphotropic phase boundary (MPB) is a promising approach to enhance the electrocaloric effect in ferroelectric polymers. This is usually achieved by a composition method, and polymer processing near the MPB to tune electrocaloric response...
Multi-scale characterization techniques have been employed to analyze the size effect of microstructure on the phase transition behavior and dielectric properties of poly(vinylidene fluoride) (PVDF) films. The results show that oriented amorphous fra...
The metal–insulator transition induced by the gate electric field in the charge order phase of the
The Mpemba effect, where a hotter system can enter a cold phase faster than a cooler one, remains a counterintuitive phenomenon whose origins are still being unraveled. In this work, we propose and demonstrate a simple and general mechanism for the g...
The effect of a high magnetic field up to 12 T and a high hydrostatic pressure up to 12 kbar on the stability of the metamagnetic isostructural phase transition and the multicaloric effect of Fe49Rh51 alloy has been studied. The phase transition temp...
The physical properties of sodium cocoyl glycinate (SCG) and the synergistic effects within the SCG/CAPB complex system were investigated using visible–ultraviolet spectrophotometry and a surface tension meter. Analysis of the synergistic param...
This document presents an efficient proportional derivative (PD) position controller for three-phase motor drives. The regulator has been designed in frequency domain, employing the direct–quadrature (d–q) synchronous rotating reference frame and the...
A detailed study of the effect of temperature and pressure on heat capacity, entropy and hysteresis phenomena near the ferroelectric phase transition in ammonium sulfate (AS) was performed. An analysis of experimental results within the framework of...
Strong thermo-optic effect of polymers is useful for fabricating tunable phase-delay devices with low power consumption and wide tuning range. However, if the temperature change is increased to extend the tuning range, an attenuation of the guided li...
The hydrogen diffusion in welding was investigated by using thermal-mechanical-hydrogen diffusion sequential coupled procedures based on finite element method. A self-gathering effect induced by the solid-state phase transformation was discovered. Be...
Various apparently inconsistent experimental observations have been reported on the effects of electric charges on the volume phase transition of thermosensitive gels. A simple method of interpretating these results is presented.
Nowadays, Organic Rankine Cycle (ORC) is one of the most promising technologies analyzed for electrical power generation from low-temperature heat such as renewable energy sources (RES), especially solar energy. Because of the solar source variation...
The magnetic properties of 1 nm thick in-plane anisotropic Co ultrathin film on ZnO(0001) were investigated through successive 500 eV nitrogen-ion sputtering. Magneto-optical Faraday effects were used to observe the evolution of the ion-irradiated s...
In this paper, quantitative two-dimensional (2-D) phase-field simulations were performed to gain insight into the effects of B and Nb for Al-Ti-Nb balanced-ratio GH4742 alloys. The microstructure evolution during the precipitation process was simulat...
(Sc,Ti)Fe2 Laves phases present a relatively unique case of first-order ferro-ferromagnetic transition originating from an instability of the Fe moment. In addition to large magnetoelastic effects making them potential negative thermal expansion mate...
We studied the emergence of the quantum spin Hall (QSH) states for the pseudo-gap (PG) phase of Bi2212 bilayer system, assumed to be D-density wave (DDW) ordered, starting with a strong Rashba spin-orbit coupling (SOC) armed, and the time reversal sy...
An aqueous polyvinyl alcohol (PVA)/chitosan (CHT)/polyhexamethylene biguanide (PHMB) blends (PVA/CHT/PHMB blends) has been developed as a potential low dose topical antibacterial formulation with enhanced antimicrobial effect. The preparation of PVA/...
Songliao Basin hosts abundant shale oil and gas resources, yet the phase behavior of the fluids is still unclear since the confinement effect of the shale reservoir alters the adsorption effect on the pore walls. In this study, molecular dynamics (MD...
This study focusses on investigating the effect of flow orientation on global and local two-phase flow parameters under two-phase flow conditions. Flow visualization, pressure measurement, and conductivity probe measurements are performed in a test f...
Dead-time effect has become an apparent issue in high-switching-frequency high-power dual active bridge (DAB) DC-DC converter. This paper gives a detailed analysis of phase-shift errors effect caused by dead time, including output voltage offset, sof...
Research on the effects of magnetic fields on water and aqueous solutions has produced various findings, such as the suppression of scale formation in pipes and boilers, inhibition of metal corrosion, enhancement of concrete strength, and changes in...
To evaluate the vibration effect caused by carbon dioxide phase-transition fracturing, the Hilbert–Huang transform was used to study the change of vibration energy with distance in different frequency bands. The results are drawn as follows: (1...
This research presents a dual-pronged bibliometric and systematic review of the integration of phase change materials (PCM) in asphalt pavements to counteract the urban heat island (UHI) effect. The bibliometric approach discerns the evolution of PCM...
Electric submersible pumps (ESPs) are widely used in the oil and gas industry for crude-oil lifting, especially in subsea oil fields or underground storage caverns. The failure of ESPs causes a large economic cost mainly attributed to a break in prod...
One means of enhancing the performance of thermoelectric materials is to generate secondary nanoprecipitates of metallic or semiconducting properties in a thermoelectric matrix, to form proper band bending and, in turn, to induce a low-energy carrier...
The effects of the fluorinated monomer with an ethynyl group on the electro-optical properties of polymer-stabilized blue phase liquid crystals (PSBPLCs) were investigated in different polymer systems. In rigid polymer systems, the Kerr constant can...
The effect of arginine on the phase stability of the hen egg-white lysozyme (HEWL) has been studied via molecular dynamics computer simulations, as well as experimentally via cloud-point temperature determination. The experiments show that the additi...
The passage of current generates heat and increases the temperature of electrical components, which affects the environment, support insulators and contacts. Knowledge of the temperature allows for the determination of important operational parameter...
The gas-phase basicity of nitriles can be enhanced by a push–pull effect. The role of the intercalated scaffold between the pushing group (electron-donor) and the pulling (electron-acceptor) nitrile group is crucial in the basicity enhancement, simul...
In order to achieve collinear phase-matched nonlinear optical frequency conversion in cubic crystals, a novel method to induce and modulate the birefringence based on the linear electro-optic effect was studied. Taking terahertz generation with ZnTe...
To explore the cooling effect of phase change materials (PCM) on asphalt pavement, a numerical model of the coupled heat transfer process of a typical monolithic subgrade of the G7 Expressway in the eastern Tianshan mountain area was developed. Three...
This work studied the high strain rate behavior of the Ti-4Al-5Mo-5V-5Cr-1Nb (Ti-45551) alloy after two-stage aging, with dynamic tension tests conducted using the split Hopkinson tensile bar. The results show that the microstructure, especially the...
This paper presents the results of atom probe tomography studies on radiation-induced phase formation in light-water reactor pressure vessel steels after neutron irradiation under various conditions in comparison with the literature data. The given i...
The present work offers a thorough analysis of the impact of water velocity on phase change material (PCM) melting in a vertical cylindrical container. A detailed quantitative analysis uses sophisticated numerical techniques, namely the ANSYS/FLUENT...
of 1,039