Poly(arylene ether nitrile)s with sulfonic and carboxylic groups (SCPEN) were synthesized to investigate their electrical properties. This new series of copolymers were prepared by copolymerization of phenolphthalein, potassium hydroquinonesulfonate,...
A Periodic Mesoporous Organosilica (PMO) functionalized with sulfonic acid groups has been successfully synthesized via a sequence of post-synthetic modification steps of a trans-ethenylene bridged PMO material. The double bond is functionalized via...
A simple and innovative method was introduced for the production of green and recoverable flame-retardant cotton fabrics, where sulfonated cotton fabric (COT-SC) was synthesized by oxidizing cotton fabric with sodium periodate, followed by a sulfonat...
The preparation of 5-bromo-2-naphthol (4) in three steps from 5-amino-2-naphthol (1) is described. A sulfonic acid group is introduced at the 1-position as an activating and protecting group for the Sandmeyer reaction. The sulfonate group allows for...
Esterification of caprylic acid with methanol was performed over chitosan with sulfonic acid groups, as a catalyst, at 60 °C. The sulfonic acid groups were introduced into chitosan (CH) by using chlorosulfonic acid. Catalysts were characterized by sc...
Complexes of Fe(III) that contain a triazacyclononane (TACN) macrocycle, two pendant hydroxyl groups, and a third ancillary pendant show promise as MRI contrast agents. The ancillary group plays an important role in tuning the solution relaxivity of...
Adsorption using anion exchange resins is an efficient method for the removal of aromatic sulfonic acids (ASAs) from industrial wastewater. In this study, a series of weak-base anion exchangers (SD1–SD5) were synthesized to investigate the effe...
The influence of the molecular weight and chemical structure of polyphenylene sulfone (PPSU) end groups on the formation of the porous structure of ultrafiltration (UF) hollow fiber membranes was investigated. Polymers with a molecular weight ranging...
The present work proposes the use of an agro-industrial residue from the sunflower crop as a feedstock to produce a low-cost adsorbent with a chemically modified surface bearing sulfonic groups. This modified low-cost adsorbent can be used for the re...
Seven aromatic polyamides and copolyamides were synthesized from two different aromatic diamines: 4,4′-(Hexafluoroisopropylidene)bis(p-phenyleneoxy)dianiline (HFDA) and 2,4-Aminobenzenesulfonic acid (DABS). The synthesis was carried out by polyconden...
In this study, electroactive poly (amic acid) (EPAA) and corresponding polyimide (EPI) without or with a sulfonated group (i.e., S-EPAA, and S-EPI) were prepared and applied in electrochemical sensing of ascorbic acid (AA). The electroactive polymers...
Porous aromatic frameworks (PAFs) are an auspicious class of materials that allow for the introduction of sulfonic acid groups at the aromatic core units by post-synthetic modification. This makes PAFs promising for proton-exchange materials. However...
The separation of Li+ from an aqueous solution has received much attention in recent years because of its wide application in batteries and nuclear energy. A cellulose microsphere adsorbent with sulfonic acid groups (named as CGS) was successfully pr...
In the search for novel smart multifunctional liquid crystalline materials, we report the synthesis, thermal and structural characterisation, and the conductivity, of a set of new block and statistical copolymers, containing light-responsive mesogeni...
In this project, KIT-5 materials were effectively functionalized with sulfonic groups introduced by grafting or the co-condensation method and tested as heterogeneous solid acid catalyst. A co-condensation procedure leading to the stable, –SO3H...
Composite polymeric membranes were designed based on sulfonated poly(ether ether sulfone) (sPEES) and mesostructured cellular foam (MCF) silica nanoparticles functionalized with organic compounds. Parameters such as molecular weight (MW) of the polym...
This study presents Pb(II) recovery/removal from water solutions using two different commercial ion-exchange resins, i.e., Dowex G-26 with sulfonic functional group and Puromet™ MTS9570 with sulfonic and phosphonic functional groups. Overall, 1...
Motivated by the need for efficient purification methods for the recovery of valuable resources, we developed a wire-electrospun membrane adsorber without the need for post-modification. The relationship between the fiber structure, functional-group...
In this work, we synthesized a metal-free sulfonic functionalized graphitic carbon nitride using sulfuric acid through the wet impregnation technique. The functionalization of sulfonic groups (–SO3H) on g-C3N4 will promote a high surface charge...
A series of petroleum coke (petcoke)-derived solid acid catalysts were prepared via nitric acid treatment with or without ball milling pretreatment. The inherent sulfur in petcoke was converted to sulfonic groups, which were active sites for the este...
Chemical functionalization of carbon support for Pt catalysts is a promising way to enhance the performance of catalysts. In this study, Pt/C catalysts grafted with various amounts of phenylsulfonic acid groups were prepared under mild conditions. Th...
This study explored the preparation of pure silica KIT-6, as well as KIT-6 materials with an enhanced concentration of surface OH groups through aluminum incorporation or NH4F treatment. These materials with various contents of surface OH groups were...
Nanocellulose is a sustainable material which holds promise for many energy-related applications. Here, nanocrystalline cellulose is used to prepare proton exchange membranes (PEMs). Normally, this nanomaterial is highly dispersible in water, prevent...
This study aimed to achieve bioactivity on the PEEK surface using piranha solution through a lower functionalization time. For this purpose, the functionalization occurred with piranha solution and 98% sulfuric acid in the proportions of 1:2, 1:1, an...
Rice husk (RH), a globally abundant agri-food waste, presents a promising renewable silicon source for producing SBA-15 mesoporous silica-based materials. This study aimed to synthesize and bifunctionalize SBA-15 using RH as a silica precursor, incor...
The hydration of camphene was carried out over SBA-15 with sulfonic acid groups and tungstophosphoric acid at 50 °C. The main product of camphene hydration was isoborneol, with camphene hydrate and borneol as byproducts. The catalytic activity in...
A series of various readily water soluble esters were synthesized by a very efficient procedure. These compounds can be useful as thermosensitive tracers for studying the cooling progress in a low enthalpy georeservoir exploitable by double flash geo...
We successfully synthesized the water-soluble chitosan derivatives propane sulfonated chitosan (PSCS) and dipropane sulfonated chitosan (DPSCS) in this paper. These derivatives were characterized by FTIR, 1H NMR, and 13C NMR. Moreover, the antioxidan...
An analysis methodology was optimised and validated for the quantification of opium alkaloids (OAs) in ground poppy seeds. This involved ultrasound-assisted extraction (UAE) and solid-phase extraction (SPE) purification before analysis using a high-p...
Iodosulfonylation of an ethynyl group at the C2 position of 2′-deoxyadenosine or adenosine with TsI provides (E)-2-(β-iodovinyl)sulfones. The latter undergo nucleophilic substitution with amines via an addition–elimination to give &b...
Polymers for application as sulfonated polyphenylene membranes were prepared by nickel-catalyzed carbon-carbon coupling reaction of bis(4-chlorophenyl)-1,2-diphenylethylene (BCD) and 1,4-dichloro-2,5-dibenzoylbenzene (DCBP). Conjugated cis/trans isom...
Thermal degradation processes of poly(ether sulfone) random copolymers having different molar amount of diphenolic acid (DPA) units were studied by direct-pyrolysis/mass spectrometry, stepwise pyrolysis-gas chromatography/mass spectrometry and thermo...
Lipase from Thermomyces lanuginosus (TLL) has been immobilized on a methacrylate macroporous resin coated with octadecyl groups (Purolite Lifetech®® ECR8806F). This immobilization protocol gave a biocatalyst with significantly higher stabilit...
Two water-soluble block copolymers composed of acrylic acid (AA), 2-acrylamido-2-methylpropane sulfonic acid (AMPS), and optionally maleic anhydride (MAH) were synthesized through ammonium persulfate-catalyzed free radical polymerization in water. Th...
Fabrication of high-dye/salt-separation-performances and chlorine-resistant nanofiltration (NF) membranes are crucial for dye desalination. In this study, a thin-film composite NF membrane (PES–DPS) was prepared through the interfacial polymeri...
The rich −SO3H groups enable sulfonated poly (ether ether ketone) (SPEEK) to possess excellent proton conductivities in proton exchange membrane (PEM), but cause excessive water absorption, resulting in the decline of dimensional stability. It...
The electrical response of sulfonated single-walled carbon nanotubes (SWCNTs) to NO and NO2, for gas sensing applications, at room temperature, is reported in this work. A specific configuration based on SWCNT deposition between double pair configura...
Sodium p-perfluorous nonenoxybenzene sulfonate (OBS) is one of the key alternatives to perfluoroalkyl substances (PFASs). Its widespread tendency has increased extensive contamination in the aquatic environment. However, the present treatment technol...
The recovery and abatement of volatile organic compounds (VOCs) have received increasing attention due to their significant environmental and health impacts. Supported sulfonic acid materials have shown great potential in converting aromatic VOCs int...
Polyelectrolyte microspheres based on a polymer containing sulfonate groups are considered promising drug delivery systems for encapsulating drugs and ensuring their prolonged release. In this study, gel microparticles based on various sulfonate-cont...
With the recognition of the multiple advantages of sulfonated hydrocarbon-based polymers that possess high chemical and mechanical stability with significant low cost, we employed molecular dynamics simulation to explore the morphological effects of...
In order to investigate the effect of crosslinking degree on the water uptake, swelling ratio, and methanol permeability of sulfonated poly(aryl ether nitrile)s (SPENs), the molar content of sulfonated group in bisphenol monomer is fixed at 60% in th...
The recovery and control of volatile organic compounds (VOCs) have gained significant attention. Supported sulfonic acid materials show potential in converting aromatic VOCs into non-volatile sulfonic acid derivatives. However, their effectiveness is...
The development of photothermal catalysts for biodiesel synthesis reaction (transesterification) requires the production of light-absorbing nanoparticles functionalized with catalytic (acid) groups. Using Stöber method, it is possible to produce...
The infection of mammalian cells by enveloped viruses is triggered by the interaction of viral envelope glycoproteins with the glycosaminoglycan, heparan sulfate. By mimicking this carbohydrate, some anionic polysaccharides can block this interaction...
Sulfonated carbonaceous material useful as a solid acid catalyst was prepared from lignosulfonate, a waste of the paper-making industry sulfite pulping process, and characterized by 13C-NMR, FT-IR, TGA, SEM and elemental analysis, etc. The sulfonic a...
This review provides an overview of the latest applications of sulfonated molecules in biomaterials. Sulfonation, a chemical modification process introducing sulfonic acid groups, enhances biomaterial properties. This review explores the effect of su...
Sulfonic resins are highly efficient cation exchangers widely used for metal removal from aqueous solutions. Herein, a new sulfonation process is designed for the sulfonation of algal/PEI composite (A*PEI, by reaction with 2-propylene-1-sulfonic acid...
The introduction of sulfonic acid modified silica in Nafion nanocomposite membranes is a good method of improving the Nafion performance at high temperature and low relative humidity. Sulfonic acid-modified silica is bifunctional, with silica phase e...
The recovery and reuse of high-impact polystyrene (HIPS) into high-value products is crucial for reducing environmental thermoplastics waste and promoting sustainable materials for various applications. In this study, asymmetric membranes obtained fr...
of 17