Cell–substrate interaction plays an important role in intracellular behavior and function. Adherent cell mechanics is directly regulated by the substrate mechanics. However, previous studies on the effect of substrate mechanics only focused on...
Animal locomotion in complex environments depends on the ability to adaptively regulate movement in response to substrate mechanics. Tree frogs (Polypedates dennysi), which combine jumping and adhesive capabilities, inhabit arboreal habitats with a w...
Inkjet printing is novel approach in drug manufacturing that enables dispensing precise volumes of ink onto substrates. Optimal substrate properties including suitable mechanical characteristic are recognized as crucial to achieve desired dosage form...
Angiogenesis, a vital physiological or pathological process regulated by complex molecular networks, is widely implicated in organismal development and the pathogenesis of various diseases. SIRT7, a member of the Sirtuin family of nicotinamide adenin...
The selection of growth substrate geometries for the mechanical dry transfer of carbon nanotubes to device substrates depends on the precision of the assembly equipment. Since these geometries play a decisive role in the overall efficiency of the pro...
Graphene exhibits great potential as an anti-friction coating material in MEMS. However, its underlying microscopic friction-reduction mechanism remains unclear. In this paper, the microstructural evolution and nanomechanical behavior of graphene coa...
Employing density functional theory calculations, we obtain the possibility of fine-tuning the bandgap in graphene deposited on the hexagonal boron nitride and graphitic carbon nitride substrates. We found that the graphene sheet located on these sub...
Electrochemical mechanical polishing is a critical technology for improving the surface quality of silicon carbide (SiC) substrates. However, the fundamental electrochemical corrosion mechanism of the SiC substrate remains incompletely understood. In...
The effect of mechanical pre-treatment of nine different agricultural substrates minced to particle sizes of 1.5 mm, 5 mm and 10 mm on biogas and methane yields and fermentation kinetics was investigated. The results showed, that for five of the nine...
The reactive gas flow ratio and substrate bias voltage are crucial sputtering parameters for fabricating transition metal nitride films. In this study, W–N films were prepared using sputtering with nitrogen flow ratios (f) of 0.1–0.5. W&n...
This study proposes a method for measuring curved-mechanical characteristics based on a whole-folding test for transparent conductive film-coated polymer substrates using common-path optical interferometry. Accordingly, 80-, 160-, and 230-nm indium t...
In our prior research (2022), a Fe3O4@PDA@Au@GO composite was reported as a surface-enhanced Raman scattering (SERS) substrate for phenanthrene detection, with a detection limit of 10−7 g/L. The current study is a mechanistic follow-up investig...
As LED devices continue to advance toward miniaturization and higher power density, heat dissipation has become a critical factor constraining their reliability and service life. Molybdenum is widely employed as a substrate material in LED devices ow...
The electro-mechanical behaviors of transparent conductive oxide film on polymer substrate are of great concern because they would greatly affect the stability and lifespan of the corresponding devices. In this paper, indium tin oxide (ITO) films wit...
Matrix-assisted chondrocyte transplantation (MACT) is of great interest for the treatment of patients with cartilage lesions. However, the roles of the matrix properties in modulating cartilage tissue integration during MACT recovery have not been fu...
In this paper, interfacial stress analysis for a brittle coating/ductile substrate system, which is involved in a sliding contact with a rigid ball, is presented. By combining interface mechanics theory and the image point method, stress and displace...
The objective of this paper is to present a new way of identifying and predicting the relationship between thermodynamic and physical-mechanical parameters in the formation of a layer after spraying on a substrate with NiCrBSi alloy and its subsequen...
This study investigates the impact of polycarbonate diol (PCDL)-modified toluene diisocyanate (TDI)-based polyester polyurethane polishing pads on the chemical mechanical polishing of 4H silicon carbide (4H-SiC) substrates. Employing a unique metho,...
The decohesion of coatings, thin films, or layers used to protect or strengthen technological and structural components causes the loss of their functions. In this paper, analytical, computational, and semi-analytical 2D solutions are derived for the...
Infrared transmission characteristics of VO2 thin films synthesized on multiple substrates, using a low-pressure direct oxidation technique, have been characterized. Material characterization of these films indicates high material quality, which resu...
Flexible mechanical sensors based on nanomaterials operate on a deformation-response mechanism, making it challenging to discern different types of mechanical stimuli such as pressure and strain. Therefore, these sensors are susceptible to significan...
In this work, VO2 based thermal sensing thin film synthesized on flexible muscovite substrates by direct oxidation of deposited vanadium metal, were investigated for the impact of doping and strain on their electrical properties. We investigated both...
Consumption of mushrooms has recently increased due to their health benefits; consequently, increased mushroom cultivation generates large volumes of spent mushroom substrate (SMS) and effective methods for SMS valorization are thus required. Anaerob...
Structural color-generating materials are expected to replace pigments and dyes as a new type of color-developing materials with good light stability and bright colors. Due to the relatively high refractive index of Cu2O microspheres, they have stron...
Since the characteristics of plug seedlings affect the effectiveness of automatic transplanting, this study aimed to explore the effect of the addition of biochar into substrates on the growth of plug seedlings before and after transplanting. The phy...
Reaction mechanisms and rate constants of the acylation reaction of the hepatitis C virus (HCV) NS3/NS4A serine protease with the NS4B/5A natural substrate were studied using SCC-DFTB/MM (self-consistent charge density functional tight binding/molecu...
Most acrylate adhesives do not bond well to low-surface-energy substrates (e.g., polyethylene and polypropylene) due to the weak interaction force between the polar adhesive molecules and the substrate. To enhance the adhesion performance on low-surf...
This study evaluated the novel application of a mineral-rich biochar derived from a spent Agaricus bisporus substrate (SAS). Biochars with various pyrolysis temperatures (350–750 °C) were used to remove Cu(II), Zn(II), and Cd(II) from aqueo...
An available novel system for studying the cellular mechanobiology applies an equiaxial strain field to cells cultured on a PolyDiMethylSiloxane (PDMS) substrate membrane, which is stretched over the deformation of a cylindrical shell. In its applica...
TiN coating plays a positive role in improving the abrasion resistance and impact resistance of aero-engines in sand and dust environments. However, little research has been done on the laser cleaning of TiN coatings that failed on aircraft engines....
The surface of most metals is covered with thin native oxide films. It has generally been believed that to achieve bonding, the oxide covering the surface of metallic particles or metal substrates must be broken and removed by adiabatic shear instabi...
This study explores a novel method for removing Al metal coatings by using nanosecond pulsed lasers to clean Al metal layers from ceramic substrate surfaces. The impact of laser power and pulse width on the effectiveness of the removal of the Al meta...
This work focuses on an inkjet-fabricated sensor based on copper oxide nanostructured particles on polymer flexible substrate for the sensing of alcohol vapours and humidity at room temperature. Nanoparticles were prepared by a microwave-assisted sol...
This paper investigates how negative substrate bias voltage and sputtering pressure influence tungsten coatings deposited via radiofrequency magnetron sputtering. Increasing the absolute value of negative bias voltage (up to −150 V) of the subs...
Using molecular dynamics (MD) simulations, the frictional properties of the interface between graphene nanoflake and single crystalline diamond substrate have been investigated. The equilibrium distance between the graphene nanoflake and the diamond...
This perspective examines the role of chemistry and molecular biology for a science of consciousness. Opposed to the consensus view, we argue that the molecular organization of biological systems is key to arrive at a thorough understanding of the dy...
Xenobiotic reductase B (XenB) catalyzes the reduction of the aromatic ring or nitro groups of nitroaromatic compounds with methyl, amino or hydroxyl radicals. This reaction is of biotechnological interest for bioremediation, the reuse of industrial w...
In an ageing society, polypharmacy has become a major public health and economic issue. Overuse of medications, especially in patients with chronic diseases, carries major health risks. One common consequence of polypharmacy is the increased emergenc...
Geopolymer, as a new type of solid waste-based inorganic cementitious material, exhibits outstanding behavior in terms of physical and chemical performance, macromechanical properties, long-lasting stability, and features potential application develo...
Conformational changes are fundamental events in the transport mechanism. The serotonin transporter (SERT) catalyzes reuptake of the neurotransmitter serotonin after its release by serotonergic neurons and is the molecular target for antidepressant d...
Mycelium-based composites (MBCs) are emerging as low-carbon materials for converting agricultural residues into construction-oriented panels. However, the specific role of substrate selection remains difficult to define because fungal species, nutrie...
Surface-enhanced Raman spectroscopy (SERS) has rapidly emerged as a powerful analytical technique for the sensitive and selective detection of organophosphorus pesticides (OPPs) in complex food matrices. This review summarizes recent advances in subs...
Until now, Streptoverticillium mobaraense transglutaminase (TG) is the only commercialized TG, but limited information is known about its selection tendency on crosslinking sites at the protein level, restricting its application in the food industry....
Chemoenzymatic peptide synthesis is the hydrolase-catalyzed stereoselective formation of peptide bonds. It is a clean and mild procedure, unlike conventional chemical synthesis, which involves complicated and laborious protection-deprotection procedu...
The phospholipase A2 (PLA2) superfamily of phospholipase enzymes hydrolyzes the ester bond at the sn-2 position of the phospholipids, generating a free fatty acid and a lysophospholipid. The PLA2s are amphiphilic in nature and work only at the water/...
Adhesion between fused deposition modelling (FDM) printed polymers and textile substrates is critical for durable printed-on-textile hybrids. Since no dedicated test standard exists for additively manufactured textile interfaces, many studies use T-p...
Bioengineered in vitro models of the kidney offer unprecedented opportunities to better mimic the in vivo microenvironment. Kidney-on-a-chip technology reproduces 2D or 3D features which can replicate features of the tissue architecture, composition,...
The effects of mechanical properties and contact environment conditions on the adhesiveness of the biomimetic adhesive mushroom-shaped micro-structure have been experimentally investigated. The idea is based on the adhesive micro-structures and surfa...
Ceria-based abrasives are widely used in precision chemical mechanical polishing (CMP) fields, such as thin film transistor liquid crystal display (TFT-LCD) glass substrates and integrated circuits, because of their excellent physicochemical properti...
Perovskite solar cells (PSCs) have emerged as a rising next-generational photovoltaic technology due to low fabrication costs through solution processing as compared to traditional silicon solar cells and high-power conversion efficiency. However, th...
of 194