Calculating the second-order effect and reinforcement of reinforced concrete box section columns has geometric nonlinearity and material nonlinearity. It requires integration and iterative solutions and is inconvenient in practical applications; more...
The type and the properties of the soil can potentially intensify the internal forces on buildings during seismic loads. To predict the effects of the soil parameters on the soil–structure interaction of buildings, it is necessary to consider the soi...
The anion, cation, and radical structural forms of B2N (−,0,+) were studied in the case of symmetry breaking (SB) inside a (5, 5) BN nanotube ring and were also compared in terms of non-covalent interaction between these two parts. The non-bond...
This paper covers the analysis of the behavior of columns made of LWAC (Lightweight Aggregate Concrete), which can be used as a substitute for normal-density concrete. This work presents an experimental research program focused on second-order effect...
The mathematical model of the two-dimensional steady stagnation-point flow over a stretching or shrinking sheet of nanofluid in the presence of the Soret and Dufour effects and of second-order slip at the boundary was considered in this paper. The pa...
We study the relationship between mixed second differences of a transferable-utility cooperative game and payoff changes caused by player deletion. Standard second-order symmetry compares two entries in a fixed recipient row of the deletion-effect ma...
The intensive of this study is to examine the melting heat and second-order slip (SoS) effect at the boundary in nanofluid and hybrid nanofluid (HN) ethylene–glycol (EG) based fluid through a curved surface using the Modified Fourier Law (MFL)...
Quantum correlations of higher-dimensional systems are an important content of quantum information theory and quantum information application. The quantification of quantum correlation of high-dimensional quantum systems is crucial, but difficult. In...
A traditional indifference zone (IZ) approach selects the best treatment, with a preset high probability of correct selection when the best one is much better than the second-best in line. Customarily, the effect size is the difference between the be...
MnCoGe-based compounds have been increasingly studied due to their possible large magnetocaloric effect correlated to the magnetostructural coupling. In this research, a comprehensive study of structure, magnetic phase transition, magnetocaloric effe...
Biodiversity maintenance mechanisms have been central to the study of community ecology, and the negative density dependence effect plays an important role in maintaining species diversity in forest communities. However, the strength and direction of...
Although PINNs have demonstrated strong predictive capabilities in forward problems, their performance in inverse problems remains inadequate, largely due to unquantifiable noise encountered during the multi-parameter identification of prestressed co...
Floating offshore wind turbines (FOWTs) have been installed in Europe and Japan with relatively modern technology. The installation of floating wind farms in deep water is recommended because the wind speed is stronger and more stable. The design of...
Non-Hermitian photonic crystals offer a versatile platform for observing exotic phenomena, including the non-Hermitian skin effect and higher-order topological phases. In this work, we construct non-Hermitian photonic crystals by embedding balanced g...
Recently the so-called mimetic gravity approach has been used to obtain corrections to the Friedmann equation of General Relativity similar to the ones present in loop quantum cosmology. In this paper, we propose an alternative way to derive this mod...
The marine derrick sometimes operates under extreme weather conditions, especially wind; therefore, the buckling analysis of the components in the derrick is one of the critical contents of engineering safety research. This paper aimed to study the l...
Maneuvering in waves is a hydrodynamic phenomenon that involves both seakeeping and maneuvering problems. The environmental loads, such as waves, wind, and current, have a significant impact on a maneuvering vessel, which makes it more complex than m...
The p-y curve method can be used to describe the stress–strain relationship of soil under elastic, elastoplastic, and plastic states, and is more accurate than other methods in dealing with the nonlinearity of pile–soil interaction. Howev...
As the requirements for structural functionality increase, designers frequently opt for inclined columns instead of traditional vertical columns. This choice enhances the spatial dynamics, esthetic appeal, and lighting effects of the structure. Howev...
The seismic response of structures is always influenced by second order (P–Δ) effects. The importance of these effects becomes significant when the structure experiences large plastic deformations. Seismic codes indicate that P–&Del...
This study systematically investigates the impact of Cu2+ doping on the structural, magnetic, and magnetocaloric properties of CuxCo1−xCr2O4 nanoparticles synthesized via a solution combustion method. Cu incorporation up to x = 20% induces a pr...
Ultra-high performance geopolymer concrete (UHPGC) has emerged as a low-carbon cementitious material with high mechanical performance and thus offers potential as a substitute for Portland cement-based ultra-high-performance concrete (UHPC). Experime...
When a target moves at hypersonic speed, the aerodynamic thermal effect will cause air molecules to form a plasma sheath that envelopes the outer surface of the target, which consists of a large number of charged particles. The plasma sheath imposes...
The present study examines the effect of viruses on forest insects depending on the virus dose. Two model approaches are used to quantify the effect of viruses on insect survival. Both approaches describe the processes of virus exposure to insects wi...
The strain data acquired from structural health monitoring (SHM) systems of large-span bridges are often contaminated by a mixture of temperature-induced and vehicle-induced strain components, thereby complicating the assessment of bridge health. Exi...
A precast concrete segmental box-girder bridge (PCSBGB) is one of the most popular styles of Accelerated Bridge Construction (ABC). To address some common challenges (low durability, poor integrity, and construction inconvenience) in PCSBGBs, this pa...
To meet the growing requirements of agricultural mechanization, a newly designed 9.5 m span frame has been introduced to replace the traditional 8.0 m span frame, which is constrained by limited internal space. However, as the structural dimensions i...
The paper theoretically investigates the heat transfer of nanofluids with different nanoparticles inside a parallel-plate channel. Second-order slip condition is adopted due to the microscopic roughness in the microchannels. After proper transformati...
In order to investigate the effects of second-order hydrodynamic loads on a 15 MW floating offshore wind turbine (FOWT), this study employs a tool that integrates AQWA and OpenFAST to conduct fully coupled simulations of the FOWT subjected to wind an...
The motivation for this paper is to create new criteria for oscillation of solutions of second-order nonlinear neutral differential equations. In more than one respect, our results improve several related ones in the literature. As proof of the effec...
We investigate the non-linear dynamics of de Broglie gravitational waves within a post-Minkowskian framework. Starting from the perturbative solution proposed by Feoli and Scarpetta, we derive the second-order gravitational field generated by the wav...
This paper deals with a class of boundary value problems of second-order differential equations with impulses and discontinuity. The existence of single or multiple positive solutions to discontinuous differential equations with impulse effects is es...
As offshore wind energy advances into deeper waters, the dynamic response and safety assessment of tension leg platform (TLP) wind turbines under complex marine conditions have become focal research points. This study investigates a 15 MW TLP wind tu...
We present a detailed comparison between the first order Stark-effect induced Gailitis resonance in e+ + H (n = 2) and the second order Stark-effect induced resonance in e + Ps (n = 1). Common characteristics as well as differences of these resonance...
This paper discusses novel approaches to the numerical integration of the coupled nonlinear Schrödinger equations system for few-mode wave propagation. The wave propagation assumes the propagation of up to nine modes of light in an optical fiber. In...
This work continues the presentation commenced in Part I of the second-order sensitivity analysis of nuclear data of a polyethylene-reflected plutonium (PERP) benchmark using the Second-Order Adjoint Sensitivity Analysis Methodology (2nd-ASAM). This...
This study investigates the influence of loading pattern, analysis level, and nodal connection stiffness on the stability and dynamic behaviour of a low-rise steel dome. Three joint configurations and two loading scenarios, symmetrical and asymmetric...
It is shown that the 5D geodetic equations and 5D Ricci identities give us a way to create a new viewpoint on some problems of modern physics, astrophysics, and cosmology. Specifically, the application of the 5D geodetic equations in (4+1) and (3+1+1...
The critical behaviour associated with the field-induced martensitic transformation heavily relies on the vacancy and transition of the magnetic phase in MnCoGe based-compounds. Due to this revelation, an intensive investigation was brought forth to...
Fe–Ga alloys (GalFeNOLs) are the focus of attention due to their enhanced magneto-elastic properties, namely, magnetostriction in low saturation magnetic fields. In the last several years, special attention has been paid to the anelastic proper...
Nonlinear interaction between the magnon mode and the mechanical mode in a magnomechanical system is treated analytically where the magnon mode is coherently driven by a bichromatic microwave drive field consisting of a strong pumping field and a wea...
Management of financial risks and sound decision making rely on the accurate information and predictive models. Drawing useful information efficiently from big data with complex structures and building accurate models are therefore crucial tasks. Mos...
Here, we consider an asymmetric
In this paper, we present an algorithmic modeling approach based on Disjunctive Programming using Boolean logic “OR” to solve the Optimal Phasor Measurement Unit Placement (OPP). We propose a framework for modeling the optimal PMU placeme...
10 September 2019
This research aims to forecast future economic and environmental growth for the next 16 years (2020–2035) according to the government’s strategic framework by applying the second order autoregressive-structural equation model (second orde...
The subcritical polyethylene-reflected plutonium (PERP) metal fundamental physics benchmark, which is included in the Nuclear Energy Agency (NEA) International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook, has been selected to se...
By applying the Second-Order Adjoint Sensitivity Analysis Methodology (2nd-ASAM) to the polyethylene-reflected plutonium (PERP) benchmark, this work presents results for the first- and second-order sensitivities of this benchmark’s leakage resp...
Third-order nonlinear susceptibilities
Shear deformable beams have been widely used in engineering applications. Based on the matrix structural analysis (MSA), this paper presents a method for the buckling and second-order solutions of shear deformable beams, which allows the use of one e...
This paper presents the study of unsteady nanofluids flow and heat transfer past a wedge with second order velocity slip and temperature jump. The model is modified by considering the existence of a nanolayer together with the effects of thermophores...
of 144