Skip to Content

336 Results Found

  • Article
  • Open Access
18 Citations
4,911 Views
23 Pages

Design of Deterministic Microstructures as Substrate Pre-Treatment for CVD Diamond Coating

  • Richard Börner,
  • Michael Penzel,
  • Thomas Junge and
  • Andreas Schubert

17 September 2019

The coating of highly stressed components with chemical vapor deposition (CVD) diamond can extend their lifetime. In particular, the combination of steel substrates with diamond layers would find many applications in industrial production. However, t...

  • Article
  • Open Access
6 Citations
3,677 Views
9 Pages

Prediction of Ground Surfaces by Using the Actual Tool Topography

  • Rolf Hockauf,
  • Volker Böß,
  • Thilo Grove and
  • Berend Denkena

This paper presents a prediction model for ground surfaces that uses the actual grinding wheel topography to perform a grinding simulation. Precise knowledge of expected machined surfaces plays an important role in process planning. Here, the main cr...

(This article belongs to the Special Issue Surface Integrity in Machining)
  • Article
  • Open Access
11 Citations
4,418 Views
18 Pages

Investigation of Shear-Induced Deformation of Reinforcing Textiles by Optical Measurement Devices

  • Stefan Rothe,
  • Ellen Wendt,
  • Sybille Krzywinski,
  • Marianna Halász and ,
  • Peter Bakonyi,
  • Peter Tamás and
  • Attila Bojtos
  • + 2 authors+ 0 author

28 March 2019

When fiber-reinforced plastic (FRP) components are designed, it is very important to ensure that textiles are formed into complex 3D geometries without folds, and that the reinforcing structure is oriented appropriately. Most research in this context...

(This article belongs to the Special Issue Textile-Based Advanced Materials: Construction, Properties and Applications)
  • Article
  • Open Access
3 Citations
2,736 Views
18 Pages

Developing a Simulation Model to Numerically Estimate Energy Parameters and Wave Energy Converter Efficiency of a Floating Wave Power Plant

  • Maxim Zhelonkin,
  • Andrey Kurkin,
  • Alexey Loskutov,
  • Alexander Plekhov and ,
  • Dmitry Malyarov and
  • Evgeny Kryukov
  • + 1 author+ 0 author

17 May 2023

The significance of coastal zone object protection using wave electrical energy complexes (WEECs) is dealt with. The authors suggest using a floating wave power plant (FWPP), which comprises electrical energy functions and provides coastal zone prote...

(This article belongs to the Section A: Sustainable Energy)
  • Article
  • Open Access
3 Citations
1,850 Views
21 Pages

Finite Element Analysis of Plastic Deformation in Ultrasonic Vibration Superimposed Face Milling of Steel X46Cr13

  • Richard Börner,
  • Philipp Steinert,
  • Nithin Kumar Bandaru and
  • Andreas Schubert

Ultrasonic vibration superimposed face milling enables the generation of predefined surface microstructures by an appropriate setting of the process parameters. The geometrical reproducibility of the surface characteristics depends strongly on the pl...

(This article belongs to the Special Issue Micro-Manufacturing and Applications, 4th Edition: Materials and High-Precision Micromachining)
  • Article
  • Open Access
3,540 Views
18 Pages

Elastic–Plastic Material Deformation and Conveying Value of Twist-Free Turned Surfaces

  • Richard Börner,
  • Thomas Junge,
  • Thirumanikandan Subramanian,
  • Stefan Thielen and ,
  • Oliver Koch and
  • Andreas Schubert
  • + 1 author+ 0 author

11 September 2022

Counter-surfaces for radial shaft seals are usually finished by infeed grinding to avoid macro twist structures on the surface since they can impose a conveying action on the lubricant. This can lead to either leakage or starved lubrication and subse...

(This article belongs to the Collection Featured Articles for Surfaces)
  • Article
  • Open Access
4 Citations
6,412 Views
16 Pages

16 November 2017

This paper considers heavy duty grinding with resin bonded corundum grinding wheels and without lubrication and cooling. A vertical turning machine redesigned to a grinding machine test bench with a power controlled grinding spindle is used in all of...

(This article belongs to the Special Issue Modern Grinding Technology and Systems)
  • Article
  • Open Access
5 Citations
6,291 Views
12 Pages

Structuring Surfaces by Microfinishing Using Defined Abrasive Belts

  • Meik Tilger,
  • Monika Kipp,
  • Sebastian Schumann,
  • Tountzer Tsagkir Dereli and
  • Dirk Biermann

29 November 2017

Microfinishing, also known as superfinishing or short-stroke honing, is a commonly used process for generating technical surfaces focusing on tribological applications. Due to microfinishing processes high surface qualities are manufacturable regardi...

  • Article
  • Open Access
1 Citations
2,638 Views
16 Pages

27 May 2024

An ARM Cortex simulation system for collaborative welding robots is presented in this paper. The components of the ARM Cortex SoC for embedded robot control, an OpenGL ES with image rendering, and a 3D geometry engine OpenCasCade for modeling are int...

(This article belongs to the Special Issue Process Automation and Smart Manufacturing in Industry 4.0/5.0)
  • Article
  • Open Access
650 Views
20 Pages

Influence of the Tool Geometry on the Surface Properties in Ultrasonic Vibration Superimposed Machining of Bronze

  • Hendrik Liborius,
  • Jonas Maximilian Werner,
  • Andreas Nestler,
  • Welf-Guntram Drossel and
  • Andreas Schubert

9 December 2025

Ultrasonic vibration superimposed turning represents a highly efficient method for surface microstructuring, which enables a combination with finish machining. However, there are almost no industrial applications of this process due to the special ki...

(This article belongs to the Special Issue Recent Advances in Surface Integrity with Machining and Milling)
  • Article
  • Open Access
294 Views
32 Pages

Mode-Dependent Differential-Algebraic Kinematic Modeling of a Four-Wheel Wall-Climbing Robot on Cylindrical Inner Surfaces

  • Dapeng Zhang,
  • Yongchang Zhang,
  • Shasha Wang,
  • Weihao Mao and ,
  • Junlong Guo,
  • Jianwen Zhao and
  • Zhiguang Xing
  • + 2 authors+ 0 author

9 October 2026

Multi-wheel wall-climbing robots operating on cylindrical inner surfaces are subject to configuration-dependent wheel-surface contacts and nonholonomic rolling constraints, making planar differential-drive or fixed-contact kinematic models insufficie...

(This article belongs to the Special Issue Applied Mathematics and Artificial Intelligence for Robotics)
  • Article
  • Open Access
3 Citations
4,143 Views
31 Pages

Computational Modelling of Protected and Unprotected Head Impacts in Rugby

  • Thea Hodges,
  • Adam Jones,
  • Lucía Pérez del Olmo,
  • Ashwin Mishra and ,
  • Brian Caulfield,
  • Tahar Kechadi,
  • David MacManus and
  • Michael D. Gilchrist
  • + 3 authors+ 0 author

This study involved the simulation of five real-world head impact events in rugby, to assess the level of protection provided by a novel foam headguard, the N-Pro. The University College Dublin Brain Trauma Model (UCDBTM) was used to estimate the pea...

(This article belongs to the Section Engineering Biomechanics)
  • Article
  • Open Access
2 Citations
2,098 Views
26 Pages

Tunnels are commonly constructed in water-bearing zones, which necessitates stability analyses of saturated tunnels based on the upper bound of the plastic theory. Previous kinematical approaches have the following drawbacks: (1) using an empirical a...

(This article belongs to the Special Issue Advanced Materials and Novel Technique in Civil Engineering)
  • Article
  • Open Access
2 Citations
3,512 Views
19 Pages

11 January 2021

It is essential to reduce structural damages caused by earthquakes in severe conditions, such as layered ground, especially when a soft soil layer is close to the surface. In this study, the kinematic and inertial interactions, two mechanisms of soil...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
4 Citations
2,713 Views
16 Pages

30 August 2023

The present study aims to investigate the interaction of ratcheting and fatigue phenomena for additively manufactured (AM) samples of SS304L and AlSi10Mg undergoing uniaxial asymmetric stress cycles. Overall damage was accumulated through fatigue and...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
7 Citations
3,689 Views
23 Pages

In a recent study, we developed a minimally actuated robot that utilizes wave-like locomotion and analyzed its kinematics. In this paper, we present an analysis of the robot’s locomotion between two highly flexible surfaces. Initially, we creat...

(This article belongs to the Special Issue Design, Fabrication and Control of Bioinspired Soft Robots)
  • Feature Paper
  • Article
  • Open Access
10 Citations
3,717 Views
17 Pages

4 January 2022

In this study, a passive truss-link mechanism applicable to large-scale deployable structures was designed to achieve successful deployment in space. First, we simplified the selected truss-link mechanisms to the two-dimensional geometry and calculat...

(This article belongs to the Special Issue Computational Modeling and Simulation of Solids and Structures: Recent Advances and Practical Applications)
  • Article
  • Open Access
4 Citations
1,456 Views
29 Pages

13 October 2025

This work presents a task-oriented framework for optimizing robotic surface finishing to improve efficiency and ensure feasibility under realistic kinematic and geometric constraints. The approach combines surface subdivision, optimal placement of th...

(This article belongs to the Special Issue Advances in Intelligent Control Theory and Robotics)
  • Article
  • Open Access
3 Citations
7,129 Views
22 Pages

This paper proposes a classification of all non-isomorphic anatomies of an orthogonal metamorphic manipulator according to the topology of workspace considering cusps and nodes. Using symbolic algebra, a general kinematics polynomial equation is form...

(This article belongs to the Special Issue Advances in Robotics and Mechatronics)
  • Article
  • Open Access
1,028 Views
16 Pages

A Musculoskeletal Simulation Study to Evaluate the Influence of Postural and Anthropometric Variability on Intervertebral Loads During Manual Lifting in Construction

  • Jose Javier Guevara-Torres,
  • Jhon Alexander Quiñones-Preciado,
  • Alexander Paz,
  • Héctor E. Jaramillo Suarez and ,
  • José Jaime García and
  • Lessby Gómez-Salazar
  • + 1 author+ 0 author

15 March 2026

Computational simulation is a valuable tool for advancing personalized ergonomics. This study evaluated the ability of musculoskeletal simulation to estimate individual lumbar loading during manual lifting tasks representative of construction activit...

(This article belongs to the Special Issue Safety Management and Occupational Health in Construction)
  • Article
  • Open Access
6 Citations
3,174 Views
18 Pages

10 July 2022

The accurate prediction of the falling film characteristics of cryogenic liquids is necessary to ensure good evaporation performance, due to their special physical properties. In this study, the film flow and heat transfer characteristics on four dif...

(This article belongs to the Special Issue Heat and Mass Transfer)
  • Article
  • Open Access
2 Citations
5,506 Views
11 Pages

Modification of the Johnson–Cook Material Model for Improved Simulation of Hard Milling High-Performance Steel Components

  • Andrey Vovk,
  • Amin Pourkaveh Dehkordi,
  • Rainer Glüge,
  • Bernhard Karpuschewski and
  • Jens Sölter

17 August 2021

Understanding the effect of thermomechanical loads during finish cutting processes, in our case hard milling, on the surface integrity of the workpiece is crucial for the creation of defined quality characteristics of high-performance components. Com...

  • Article
  • Open Access
12 Citations
3,348 Views
21 Pages

Prediction of Surface Topography in Robotic Ball-End Milling Considering Tool Vibration

  • Jinyu Liu,
  • Yuqin Niu,
  • Yiyang Zhao,
  • Lin Zhang and
  • Yanzheng Zhao

14 February 2024

Because of their low cost, large workspace, and high flexibility, industrial robots have recently received significant attention in large-scale part machining. However, due to the stiffness limitations in robot joints and links, industrial robots are...

(This article belongs to the Section Actuators for Manufacturing Systems)
  • Article
  • Open Access
20 Citations
11,625 Views
16 Pages

Design and Analysis of a Robotic Gripper Mechanism for Fruit Picking

  • Yongpeng Xu,
  • Mingming Lv,
  • Qian Xu and
  • Ruting Xu

3 September 2024

A gripper is the critical component of the robot end effector for the automatic harvesting of fruit, which determines whether the fruit can be harvested intact or undamaged. In this paper, a robotic gripper mechanism based on three-finger and variabl...

(This article belongs to the Special Issue Design and Control of Agricultural Robotics)
  • Article
  • Open Access
1 Citations
1,440 Views
22 Pages

12 March 2026

Background and Objectives: Surface electromyography (EMG) is widely used to assess muscle activation. However, direct interpretation of its functional biomechanical consequences remains challenging. This study aimed to develop and evaluate an EMG-dri...

(This article belongs to the Section Sports Medicine and Sports Traumatology)
  • Article
  • Open Access
11 Citations
4,180 Views
17 Pages

30 June 2020

Fresnel micro-structured lenses are widely used in the field of modern optoelectronic technology. High-precision Fresnel micro-structured mold is the key technology to achieve its large-scale replication production. Focusing on the surface waviness e...

(This article belongs to the Special Issue Ultra Precision Technologies for Micromachining)
  • Article
  • Open Access
29 Citations
3,754 Views
17 Pages

29 May 2022

Control of closed-kinematic chain manipulators (CKCM) with uncertain dynamics is a tremendous challenge due to the synchronization among actual joints and end-effectors, limited workspace, and nonexistent closed-form solutions of forward kinematics....

(This article belongs to the Special Issue Modelling and Control of Mechatronic and Robotic Systems, Volume II)
  • Article
  • Open Access
3 Citations
5,163 Views
22 Pages

2 December 2022

When the power chassis of general forest machinery is working on uneven terrains, the power is insufficient due to the poor traction between the wheels and the road surface, which affects the driving operation of the entire vehicle. According to the...

(This article belongs to the Section Sustainable Engineering and Science)
  • Article
  • Open Access
6 Citations
8,180 Views
18 Pages

20 February 2023

Using the unsteady vortex lattice method based on the potential flow theory, a rapid modeling approach is developed for the aerodynamic computation of multi-lifting surfaces. Multiple lifting surfaces with different geometric parameters and grid divi...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
478 Views
29 Pages

In this study, the energy harvesting mechanism of a two-degree-of-freedom (2-DOF) oscillating foil under near-surface conditions and the underlying influence of structural parameters are systematically investigated. Numerical simulations are conducte...

(This article belongs to the Section Marine Energy)
  • Article
  • Open Access
731 Views
19 Pages

8 March 2026

This paper investigates robotic surface-to-surface object transfer, a release manipulation task in which a robot transfers an object from an end-effector that functions solely as a large supporting surface to an external surface such as the ground. S...

(This article belongs to the Special Issue Next-Generation Mobile Robotics: Intelligent Navigation, Adaptive Planning, and Sensor Integration)
  • Article
  • Open Access
13 Citations
6,123 Views
19 Pages

Preliminary Biomechanical Evaluation of a Novel Exoskeleton Robotic System to Assist Stair Climbing

  • Max Böhme,
  • Hans-Peter Köhler,
  • Robert Thiel,
  • Jens Jäkel and ,
  • Johannes Zentner and
  • Maren Witt
  • + 1 author+ 0 author

2 September 2022

A novel exoskeleton robotic system was developed to assist stair climbing. This active demonstrator consists of a motor with a cable system, various sensors, and a control system with a power supply. The objective of this preliminary study is a biome...

(This article belongs to the Special Issue Exoskeleton Robotic Systems)
  • Article
  • Open Access
4 Citations
13,624 Views
13 Pages

3 November 2020

Alpine skiing is a complex sport that demands a high level of motor control and balance. In general, skiers are prone to deterioration in the state of fatigue due to using inappropriate equipment. As a consequence, the risk of injury might increase....

(This article belongs to the Special Issue Sports Performance and Health)
  • Article
  • Open Access
10 Citations
5,721 Views
18 Pages

Simulative Evaluation of the Underwater Geodetic Network Configuration on Kinematic Positioning Performance

  • Menghao Li,
  • Yang Liu,
  • Yanxiong Liu,
  • Guanxu Chen and ,
  • Qiuhua Tang,
  • Yunfeng Han and
  • Yuanlan Wen
  • + 2 authors+ 0 author

17 April 2022

The construction of underwater geodetic networks (UGN) is crucial in marine geodesy. To provide high-precision kinematic positioning for underwater submersibles, an underwater acoustic geodetic network configuration of three seafloor base stations, o...

(This article belongs to the Special Issue Remote Sensing Technology for New Ocean and Seafloor Monitoring)
  • Article
  • Open Access
2 Citations
707 Views
19 Pages

Kinematic Analysis and Simulation of Workspace of a 6-DOF Positioning Platform

  • Artur Piščalov,
  • Vytautas Rafanavičius,
  • Artūras Kilikevičius and
  • Andrius Čeponis

16 April 2026

This manuscript presents the development of an HEX platform inverse kinematics model, its numerical implementation, and experimental validation. A complete inverse-kinematics formulation is established from the geometric definition of the base and mo...

(This article belongs to the Section E2: Control Theory and Mechanics)
  • Article
  • Open Access
3 Citations
5,349 Views
12 Pages

Progress in Ski Jumping Technology Based on Biomechanical Sport Research Methods

  • Yuan Li,
  • Lijuan Liu,
  • Lili Xing,
  • Jianzhong Chai and
  • Dong Sun

8 March 2024

(1) Background: Previous studies have compared research into ski jumping in different motor processes, but there is a lack of comparative analysis of the biomechanical research methods used to investigate different ski jumping sports. (2) Content: Ou...

(This article belongs to the Special Issue Research on Biomechanics, Motor Control and Learning of Human Movements)
  • Article
  • Open Access
4 Citations
2,992 Views
22 Pages

Trajectory Planning for Cooperative Double Unmanned Surface Vehicles Connected with a Floating Rope for Floating Garbage Cleaning

  • Mengdi Zhang,
  • Xiang Zheng,
  • Jianhua Wang,
  • Zijun Pan and ,
  • Wenbo Che and
  • Haozhu Wang
  • + 1 author+ 0 author

Double unmanned surface vehicles (DUSVs) towing a floating rope are more effective at removing large floating garbage on the water’s surface than a single USV. This paper proposes a comprehensive trajectory planner for DUSVs connected with a fl...

(This article belongs to the Special Issue Motion Control and Path Planning of Marine Vehicles—2nd Edition)
  • Article
  • Open Access
13 Citations
5,185 Views
15 Pages

16 November 2018

A new temperature-dependent cyclic plastic model, combining the nonlinear cyclic softening and kinematic hardening rules is established for a nuclear material of SA508-3 steel. A modified isotropic hardening rule is proposed to capture the temperatur...

  • Article
  • Open Access
3 Citations
2,731 Views
13 Pages

Mechanical Design of a New Hybrid 3R-DoF Bioinspired Robotic Fin Based on Kinematics Modeling and Analysis

  • Eliseo de J. Cortés Torres,
  • Luis E. García Gonzales,
  • Luis E. Villamizar Marin and
  • Cecilia E. García Cena

11 September 2024

The field of bioinspired underwater robots aims to replicate the capabilities of marine animals in artificial systems. Stingrays have emerged as highly promising species to be mimicked because of their flat body morphology and size. Furthermore, they...

(This article belongs to the Special Issue Bio-Inspired Soft Robotics)
  • Article
  • Open Access
3 Citations
2,922 Views
13 Pages

Study on the Effects of Microstructural Surfaces on the Attachment of Moving Microbes

  • Hongyue Yang,
  • Ji Qian,
  • Ming Yang,
  • Chunxi Li and ,
  • Hengfan Li and
  • Songling Wang
  • + 1 author+ 0 author

27 August 2020

The research of marine antifouling is mainly conducted from the aspects of chemistry, physics, and biology. In the present work, the movement model of microorganisms along or against the flow direction on the microstructural surface was established....

  • Article
  • Open Access
5 Citations
2,753 Views
15 Pages

24 February 2021

Industry 4.0 involves the use of information and communication technologies to transform industry by intelligent networking machines and processes. The availability of big data sets from manufacturing and inspection allow for developing new and more...

(This article belongs to the Special Issue Mechanical Tolerance Analysis in the Era of Industry 4.0)
  • Review
  • Open Access
16 Citations
4,595 Views
23 Pages

Kinematic Fields Measurement during Orthogonal Cutting Using Digital Images Correlation: A Review

  • Haythem Zouabi,
  • Madalina Calamaz,
  • Vincent Wagner,
  • Olivier Cahuc and
  • Gilles Dessein

Understanding the mechanism of chip formation during orthogonal cutting requires a local measurement of the displacement and strain fields in the cutting zone. These measurements can then be used in order to enhance/validate numerical simulation of m...

  • Article
  • Open Access
14 Citations
4,988 Views
18 Pages

The emerging multi-axis fused deposition modeling (FDM) printing process is a powerful technology for fabricating complicated 3D models that otherwise would require extensive support structures or suffer the severe stair-case effect if printed on a c...

(This article belongs to the Special Issue Advances in Multi-Axis Machining)
  • Article
  • Open Access
6 Citations
5,259 Views
9 Pages

Theoretical and Experimental Studies of Over-Polishing of Silicon Carbide in Annular Polishing

  • Junjie Zhang,
  • La Han,
  • Haiying Liu,
  • Yikai Shi and ,
  • Yongda Yan and
  • Tao Sun
  • + 1 author+ 0 author

Annular polishing technology is an important optical machining method for achieving a high-precision mirror surface on silicon carbide. However, the inevitable over-polishing of the specimen edge in annular polishing deteriorates achieved surface qua...

(This article belongs to the Special Issue Precision Machining)
  • Article
  • Open Access
5 Citations
1,698 Views
29 Pages

23 June 2025

This study addresses the heterogeneous formation control problem for cooperative unmanned aerial vehicles (UAVs) and unmanned surface vehicles (USVs) operating under input quantization constraints. A unified mathematical framework is developed to har...

(This article belongs to the Special Issue Control System of Autonomous Surface Vehicles)
  • Article
  • Open Access
1,092 Views
25 Pages

28 September 2025

This study investigates the development of axial force in micro anti-slide piles under soil movement during slope stabilization. Axial force arises from two primary mechanisms: axial soil displacement (zs) and pile kinematics. The former plays a domi...

(This article belongs to the Special Issue Sustainable Geopolymers and Low-Carbon Cementitious Materials for High-Performance Concrete)
  • Article
  • Open Access
6 Citations
2,571 Views
15 Pages

24 February 2022

The fuel type not only influences the engine power and exhaust emissions, but dilutes the lubricating oil. We studied the effects of biomass fast pyrolysis fuel, or biofuel, on the tribological behaviour of a fully formulated engine oil (FFEO) used f...

(This article belongs to the Section Energy Science and Technology)
  • Article
  • Open Access
564 Views
21 Pages

11 May 2026

To investigate the slope stability of the north bank anchorage of the Yellow River Three Gorges Bridge during foundation pit excavation and operational stages, a true three-dimensional geological model was established using Rhino6 and numerical simul...

(This article belongs to the Topic Remote Sensing and Geological Disasters)
  • Article
  • Open Access
5 Citations
1,437 Views
29 Pages

Detecting Intermediate-Mass Black Holes out to 20 Mpc with ELT/HARMONI: The Case of FCC 119

  • Hai N. Ngo,
  • Dieu D. Nguyen,
  • Tinh T. Q. Le,
  • Tien H. T. Ho and ,
  • Truong N. Nguyen and
  • Trung H. Dang
  • + 1 author+ 0 author

31 October 2025

Intermediate-mass black holes (IMBHs; MBH≈103–5 M⊙) play a critical role in understanding the formation of supermassive black holes in the early universe. In this study, we expand on Nguyen et al.’s simulated measurements...

(This article belongs to the Section Compact Objects)
  • Article
  • Open Access
7 Citations
4,008 Views
18 Pages

Modelling and Simulation of Mechanical Loads and Residual Stresses in Deep Rolling at Elevated Temperature

  • Sven Kuschel,
  • Tobias Kinner-Becker,
  • Robert Zmich,
  • Jens Sölter and
  • Daniel Meyer

Based on the concept of Process Signatures, the deep rolling process is analyzed, aiming at functional relationships between material modifications and internal material loads during the process. The focus of this work is to investigate the influence...

of 7