Skip to Content
You are currently on the new version of our website. Access the old version .

2,519 Results Found

  • Review
  • Open Access
133 Citations
19,392 Views
22 Pages

Recent Advances in Barrier Layer of Cu Interconnects

  • Zhi Li,
  • Ye Tian,
  • Chao Teng and
  • Hai Cao

9 November 2020

The barrier layer in Cu technology is essential to prevent Cu from diffusing into the dielectric layer at high temperatures; therefore, it must have a high stability and good adhesion to both Cu and the dielectric layer. In the past three decades, ta...

(This article belongs to the Special Issue Interfacial and Transport Phenomena between Liquid Metal and Solid Structural Materials)
  • Article
  • Open Access
12 Citations
3,942 Views
20 Pages

Li3V2(PO4)3 Cathode Material: Synthesis Method, High Lithium Diffusion Coefficient and Magnetic Inhomogeneity

  • Tatiana Gavrilova,
  • Yulia Deeva,
  • Anastasiya Uporova,
  • Tatiana Chupakhina and ,
  • Ivan Yatsyk,
  • Alexey Rogov,
  • Mikhail Cherosov,
  • Ruslan Batulin,
  • Mikhail Khrizanforov and
  • Sergey Khantimerov
  • + 5 authors+ 0 author

Li3V2(PO4)3 cathodes for Li-ion batteries (LIBs) were synthesized using a hydrothermal method with the subsequent annealing in an argon atmosphere to achieve optimal properties. The X-ray diffraction analysis confirmed the material’s single-pha...

(This article belongs to the Special Issue Recent Advances in Novel Compositions for Electrochemical Applications)
  • Article
  • Open Access
36 Citations
9,504 Views
12 Pages

Integration of Processing and Microstructure Models for Non-Equilibrium Solidification in Additive Manufacturing

  • Noah Sargent,
  • Mason Jones,
  • Richard Otis,
  • Andrew A. Shapiro and ,
  • Jean-Pierre Delplanque and
  • Wei Xiong
  • + 1 author+ 0 author

1 April 2021

Integration of models that capture the complex physics of solidification on the macro and microstructural scale with the flexibility to consider multicomponent materials systems is a significant challenge in modeling additive manufacturing processes....

(This article belongs to the Special Issue Simulation of Microstructure Evolution in Additive Manufacturing)
  • Article
  • Open Access
12 Citations
3,739 Views
15 Pages

Study on the Effect of Niobium on the High Temperature Oxidation Resistance of Ferritic Stainless Steel

  • En Zhu,
  • Dianxiu Xia,
  • Peidun Chen,
  • Qing Han and ,
  • Xuelin Wang,
  • Zhiheng Liu and
  • Kun Jiang
  • + 2 authors+ 0 author

25 December 2023

More and more cars are installing urea selective catalytic reduction (SCR) systems to solve the problem of exhaust emissions, which often operates at high temperatures in the exhaust system and is prone to failure of the exhaust pipe due to high-temp...

(This article belongs to the Special Issue Design, Preparation and Properties of High Performance Steels)
  • Article
  • Open Access
12 Citations
5,215 Views
17 Pages

Correlation between Thermal Behaviour of AA5754-H111 during Fatigue Loading and Fatigue Strength at Fixed Number of Cycles

  • Rosa De Finis,
  • Davide Palumbo,
  • Livia Maria Serio,
  • Luigi A. C. De Filippis and
  • Umberto Galietti

2 May 2018

The characterization of the fatigue behaviour of aluminium alloys is still capturing the attention of researchers. As it is well known in literature, for certain alloys, in a specific range of cycles number, the S-N curves do not present any asymptot...

(This article belongs to the Special Issue State-of-the-Art Materials Science in Italy 2017)
  • Feature Paper
  • Review
  • Open Access
130 Citations
14,136 Views
44 Pages

6 March 2020

The development of the high entropy alloys (HEAs) is amongst the most important topics in the field of materials science during the last two decades. The concept of multicomponent, near-equimolar systems has been already applied to the number of othe...

  • Article
  • Open Access
2 Citations
3,890 Views
14 Pages

Experimental Study on the Oxidation and Diffusion Behavior of Inconel 625 and Tool Materials

  • Erliang Liu,
  • Ning Wang,
  • Jin Qi,
  • Zhichao Xu and ,
  • Xia Liu and
  • Huiping Zhang
  • + 1 author+ 0 author

15 December 2018

Oxidation and diffusion simulation experiments were conducted to choose the most suitable material for cutting the Inconel 625 superalloy. Three tool materials, WC/Co, coated carbide, and ceramic were used as tool materials in the oxidation simulatio...

  • Article
  • Open Access
5 Citations
2,825 Views
19 Pages

A Study on Long-Term Retardation Effect of Integrated Buffer Materials Based on Bentonite on Uranium

  • Zhe Wang,
  • Yan Liu,
  • Duan Tian,
  • Zhen-Long Zhang and ,
  • Jia-Qian Zhang,
  • Qiu-Ping Zeng,
  • Chao Li,
  • Gui-Jian Liu and
  • Ya-Dong Wu
  • + 4 authors+ 0 author

30 November 2022

Buffer material has been shown to be effective over the long term for radionuclide diffusion retardation and is used as the final artificial barrier of the multi-barrier system in the high-level waste disposal repository. The method of disposal raise...

(This article belongs to the Section Environmental Mineralogy and Biogeochemistry)
  • Article
  • Open Access
8 Citations
1,744 Views
22 Pages

This study explores the development of aluminum-doped MgV2O4 spinel cathodes for aqueous zinc-ion batteries (AZIBs), addressing the challenges of poor Zn2+ ion diffusion and structural instability. Al3+ ions were pre-inserted into the spinel structur...

(This article belongs to the Special Issue Inorganic Chemistry in Asia)
  • Article
  • Open Access
24 Citations
6,081 Views
13 Pages

Thermal Diffusivity Measurement of Laser-Deposited AISI H13 Tool Steel and Impact on Cooling Performance of Hot Stamping Tools

  • Jon Iñaki Arrizubieta,
  • Magdalena Cortina,
  • Arantza Mendioroz,
  • Agustín Salazar and
  • Aitzol Lamikiz

20 January 2020

Additive manufacturing is a technology that enables the repair and coating of high-added-value parts. In applications such as hot stamping, the thermal behavior of the material is essential to ensure the proper operation of the manufactured part. The...

(This article belongs to the Special Issue Additive Manufacturing of Metals)
  • Article
  • Open Access
8 Citations
2,590 Views
17 Pages

Orthogonal Experimental Optimization of Preparation and Microstructural Properties of a Diffusion Barrier for Tantalum-Based Silicide Coatings

  • Lairong Xiao,
  • Jiawei Xu,
  • Xiaojun Zhou,
  • Yafang Zhang and ,
  • Guanzhi Deng,
  • Hongtai Shen,
  • Wei Li,
  • Xiaojun Zhao and
  • Zhenyang Cai
  • + 4 authors+ 0 author

31 May 2023

To solve the problem of silicide coatings on tantalum substrates failing due to elemental diffusion under high-temperature oxidation environments and to find diffusion barrier materials with excellent effects of impeding Si elemental spreading, TaB2...

(This article belongs to the Special Issue Study on Advanced Metal Matrix Composites)
  • Article
  • Open Access
23 Citations
6,105 Views
23 Pages

Moisture Sorption and Degradation of Polymer Filaments Used in 3D Printing

  • Andrey Aniskevich,
  • Olga Bulderberga and
  • Leons Stankevics

7 June 2023

Experimental research of the moisture sorption process of 12 typical filaments used for FFF was performed in atmospheres with a relative humidity from 16 to 97% at room temperature. Materials with high moisture sorption capacity were revealed. Fick&r...

(This article belongs to the Special Issue Mechanical and Physical Properties of 3D Printed Polymer Materials)
  • Article
  • Open Access
5 Citations
2,373 Views
10 Pages

Ultrafast diffusion disperses faster than super-diffusion, and this has been proven by several theoretical and experimental investigations. The mean square displacement of ultrafast diffusion grows exponentially, which provides a significant challeng...

(This article belongs to the Special Issue Recent Advances in Fractional Differential Equations and Their Applications, 2nd Edition)
  • Article
  • Open Access
1 Citations
2,123 Views
13 Pages

In Situ Formation of Compound Eye-like SAN-OSB Composite Microspheres by Melt-Blending Method: Enhancing Multiple-Scattering Effect

  • Yuhan Li,
  • Yitong Ding,
  • Yuhao Duan,
  • Fengying Yang and ,
  • Ying Xiong and
  • Shaoyun Guo
  • + 1 author+ 0 author

20 July 2024

The preparation of novel structures of light-diffusing particles is currently a research focus in the field of light-diffusing materials. This study, conducted by the common melt-blending process, controlled thermodynamic and kinetic factors to distr...

(This article belongs to the Special Issue Advanced Polymer Blends: From Processing to Characterisation and Application)
  • Article
  • Open Access
16 Citations
3,872 Views
14 Pages

The Effect of Cement Addition on Water Vapour Resistance Factor of Rammed Earth

  • Piotr Narloch,
  • Wojciech Piątkiewicz and
  • Barbara Pietruszka

27 April 2021

The article aims to determine the effect of cement addition on the water vapour resistance factor of stabilized rammed earth. Literature analysis indicates that different earthen materials show large differences in water vapour resistance factor valu...

(This article belongs to the Special Issue State-of-the-Art Materials Science in Poland (2020–2022))
  • Review
  • Open Access
11 Citations
6,733 Views
15 Pages

Self-Diffusion in Perovskite and Perovskite Related Oxides: Insights from Modelling

  • Efstratia N. Sgourou,
  • Yerasimos Panayiotatos,
  • Konstantinos Davazoglou,
  • Andrei L. Solovjov and ,
  • Ruslan V. Vovk and
  • Alexander Chroneos
  • + 1 author+ 0 author

27 March 2020

Perovskite and perovskite related oxides are important materials with applications ranging from solid oxide fuel cells, electronics, batteries and high temperature superconductors. The investigation of physical properties at the atomic scale such as...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
5 Citations
3,668 Views
11 Pages

27 April 2022

Packaging material has a significant role in maintaining or altering the shelf life of different products. Polymer materials are extensively used as packaging materials for different perishable and non-perishable products both during transportation a...

(This article belongs to the Special Issue Molecular Dynamics Simulations of Polymers)
  • Review
  • Open Access
50 Citations
4,295 Views
22 Pages

6 March 2024

Gas emission and diffusion through polymeric materials play crucial roles in ensuring safety and monitoring gas concentrations in technology and industry. Especially, the gas permeation characteristics for O-ring material should be investigated for s...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Proceeding Paper
  • Open Access
2 Citations
2,316 Views
7 Pages

The effect of the nitrogen diffusion layer formed by gas blow induction heating nitriding on the wear resistance and the fatigue properties of a titanium alloy was investigated. The nitrogen diffusion layer deteriorated the wear resistance of a titan...

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Article
  • Open Access
3 Citations
2,128 Views
13 Pages

29 October 2024

The surface material of an object is a key factor that affects non-line-of-sight (NLOS) imaging. In this paper, we introduce the bidirectional reflectance distribution function (BRDF) into NLOS imaging to study how the target surface material influen...

  • Article
  • Open Access
3 Citations
1,867 Views
17 Pages

9 August 2023

To study the flow and strength characteristics of loess-based backfill materials, orthogonal tests were used to design a cemented backfill material combining loess, high-water content materials, cement, and fly ash. By using the range, analysis of va...

(This article belongs to the Special Issue Microstructure, Characterization and Mechanical Properties of Coal and Coal-Like Materials (2nd Edition))
  • Article
  • Open Access
4 Citations
2,622 Views
12 Pages

Interface of a Al6061/Ti Composite Prepared by Field Assisted Sintering Technique

  • Jiří Kozlík,
  • Jozef Veselý,
  • Josef Stráský,
  • Tomáš Chráska and
  • Miloš Janeček

31 December 2020

Architectured heterogeneous metallic composites consist of two dissimilar materials with a particular focus on spatial arrangement of constituents. This experimental study describes the application of Field Assisted Sintering Technique (FAST) for man...

(This article belongs to the Section Powder Metallurgy)
  • Article
  • Open Access
7 Citations
3,292 Views
13 Pages

22 July 2022

Owing to the high market values of natural sunstones in Oregon, a kind of artificially diffused red feldspar exhibited at the Tucson Exhibition at the beginning of this century, whose color origin is the same as that of natural sunstone (copper nanop...

(This article belongs to the Special Issue Gem Characterisation)
  • Article
  • Open Access
7 Citations
3,636 Views
28 Pages

High-Temperature Interdiffusion of Tantalum and Niobium with SiC for Processing Hybrid Metal/CMC Components

  • James Braun,
  • Cédric Sauder,
  • Christine Guéneau,
  • Fiqiri Hodaj and
  • Fanny Balbaud-Célérier

22 June 2022

To ensure the leak tightness of SiC/SiC composites cladding, niobium and tantalum have been retained as liner/coating materials for their high melting point, ductility and weldability; however, their chemical compatibility at high temperatures toward...

(This article belongs to the Special Issue Advanced Composites and Coatings for Nuclear Applications)
  • Feature Paper
  • Review
  • Open Access
39 Citations
7,488 Views
22 Pages

Anion and Cation Dynamics in Polyhydroborate Salts: NMR Studies

  • Alexander V. Skripov,
  • Alexei V. Soloninin,
  • Olga A. Babanova and
  • Roman V. Skoryunov

26 June 2020

Polyhydroborate salts represent the important class of energy materials attracting significant recent attention. Some of these salts exhibit promising hydrogen storage properties and/or high ionic conductivities favorable for applications as solid el...

(This article belongs to the Special Issue Advances in Hydrogen Storage Materials for Energy Utilization)
  • Article
  • Open Access
5 Citations
5,026 Views
21 Pages

Macroalgae have many potential applications and can make important contributions to sustainability and circular economy objectives. Macroalgae are degradable high-moisture biomaterials and drying is a necessary step, but drying is an energy and capit...

(This article belongs to the Special Issue Feature Papers for Clean Technologies 2021)
  • Article
  • Open Access
6 Citations
2,698 Views
15 Pages

CO2 Diffusion and Carbonation in OPC/γ-2CaO·SiO2 Composite

  • Seung-Min Kang,
  • Kwang-Kyun Moon,
  • Woong-Geol Lee and
  • Myong-Shin Song

3 April 2023

Gamma dicalcium silicate (γ-2CaO∙SiO2, abbreviated as γ-C2S) is considered a potential candidate as a construction material owing to its high carbonation reactivity and consequent CO2 absorption. This study investigates the diffusio...

  • Perspective
  • Open Access
34 Citations
11,579 Views
16 Pages

27 January 2023

Sodium-ion batteries (SIBs) have been widely explored by researchers because of their abundant raw materials, uniform distribution, high-energy density and conductivity, low cost, and high safety. In recent years, theoretical calculations and experim...

(This article belongs to the Special Issue Advanced Electrode Materials for High-Performance Sodium-Ion Batteries)
  • Article
  • Open Access
9 Citations
2,845 Views
12 Pages

Synergistic Roles of Nb and Mo in the Formation of Oxides on Fe-20Cr-25Ni-Nb Stainless Steels in High-Temperature CO2

  • Minrui Ran,
  • Qihan Wang,
  • Yinsheng He,
  • Hongyu Zhou and ,
  • Yunhao Huang,
  • Wenyue Zheng and
  • Rui Tang
  • + 2 authors+ 0 author

27 March 2023

Fe-20Cr-25Ni-Nb steel is an important material for developing highly compact and efficient nuclear power systems by using the supercritical CO2 Brayton cycle. The in-core materials should possess excellent oxidation resistance in a high-temperature C...

(This article belongs to the Special Issue High Temperature Corrosion or Oxidation of Metals and Alloys)
  • Article
  • Open Access
3 Citations
2,580 Views
26 Pages

14 September 2024

Polymer Electrolyte Membrane Fuel Cells (PEMFCs) have emerged as a pivotal technology in the automotive industry, significantly contributing to the reduction of greenhouse gas emissions. However, the high material costs of the gas diffusion layer (GD...

(This article belongs to the Section Physical Chemistry)
  • Article
  • Open Access
8 Citations
4,687 Views
14 Pages

Introducing Oxygen Vacancies in Li4Ti5O12 via Hydrogen Reduction for High-Power Lithium-Ion Batteries

  • Yiguang Zhou,
  • Shuhao Xiao,
  • Zhenzhe Li,
  • Xinyan Li and ,
  • Jintao Liu,
  • Rui Wu and
  • Junsong Chen
  • + 2 authors+ 0 author

14 September 2021

Li4Ti5O12 (LTO), known as a zero-strain material, is widely studied as the anode material for lithium-ion batteries owing to its high safety and long cycling stability. However, its low electronic conductivity and Li diffusion coefficient significant...

(This article belongs to the Special Issue Sustainable Development Processes for Renewable Energy Technology)
  • Article
  • Open Access
1 Citations
4,931 Views
10 Pages

21 December 2022

Arc brazing is an alternative joining technology well-suited for processing thermally sensitive materials and to produce mixed material connections. Due to the technological similarities of gas metal arc brazing to gas metal arc welding, it can be as...

  • Article
  • Open Access
14 Citations
3,123 Views
16 Pages

Diffusive Transport of Dissolved Gases in Potential Concretes for Nuclear Waste Disposal

  • Elke Jacops,
  • Quoc Tri Phung,
  • Lander Frederickx and
  • Séverine Levasseur

7 September 2021

In many countries, the preferred option for the long-term management of high- and intermediate level radioactive waste and spent fuel is final disposal in a geological repository. In this geological repository, the generation of gas will be unavoidab...

(This article belongs to the Special Issue Durability and Performance of Sustainable Construction and Building Materials)
  • Article
  • Open Access
20 Citations
5,818 Views
14 Pages

2 December 2019

Microcellular foamed plastic has a cell size of approximately 0.1 to 10 microns inside a foamed polymer and a cell density in the range of 109 to 1015 cells/cm3. Typically, the formation of numerous uniform cells inside a polymer can be effectively u...

(This article belongs to the Special Issue Advanced Polymer Composite Materials)
  • Article
  • Open Access
17 Citations
5,351 Views
10 Pages

Defect, Diffusion and Dopant Properties of NaNiO2: Atomistic Simulation Study

  • Ruwani Kaushalya,
  • Poobalasuntharam Iyngaran,
  • Navaratnarajah Kuganathan and
  • Alexander Chroneos

12 August 2019

Sodium nickelate, NaNiO2, is a candidate cathode material for sodium ion batteries due to its high volumetric and gravimetric energy density. The use of atomistic simulation techniques allows the examination of the defect energetics, Na-ion diffusion...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Review
  • Open Access
4 Citations
8,794 Views
15 Pages

Sorbate Transport in Carbon Molecular Sieve Membranes and FAU/EMT Intergrowth by Diffusion NMR

  • Robert Mueller,
  • Rohit Kanungo,
  • Amrish Menjoge,
  • Mayumi Kiyono-Shimobe and ,
  • William J. Koros,
  • Steven A. Bradley,
  • Douglas B. Galloway,
  • John J. Low,
  • Sesh Prabhakar and
  • Sergey Vasenkov
  • + 5 authors+ 0 author

14 February 2012

In this paper we present and discuss selected results of our recent studies of sorbate self-diffusion in microporous materials. The main focus is given to transport properties of carbon molecular sieve (CMS) membranes as well as of the intergrowth of...

(This article belongs to the Special Issue Diffusion in Micropores)
  • Article
  • Open Access
7 Citations
4,765 Views
13 Pages

Computational chemistry is a promising technique for the prediction of material properties. Adsorption and diffusion behaviors in zeolite micropores are important for zeolite membranes. In this study, we investigated novel non-bonding interaction par...

(This article belongs to the Special Issue Zeolite Membrane: From Microstructure to Separation Performance)
  • Article
  • Open Access
2 Citations
2,835 Views
15 Pages

Study on Cavitation, Warpage Deformation, and Moisture Diffusion of Sop-8 Devices during Molding Process

  • Wenchao Tian,
  • Shuaiqi Zhang,
  • Wenbin Li,
  • Yuanming Chen and ,
  • Jingrong Zhao,
  • Fei Xin,
  • Yingying Qian and
  • Wenhua Li
  • + 3 authors+ 0 author

29 November 2023

Plastic packaging has shown its advantages over ceramic packaging and metal packaging in lightweight, thin, and high-density electronic devices. In this paper, the reliability and moisture diffusion of Sop-8 (Small Out-Line Package-8) plastic packagi...

(This article belongs to the Special Issue High-Reliability Semiconductor Devices and Integrated Circuits)
  • Article
  • Open Access
1 Citations
3,166 Views
17 Pages

21 January 2025

The knowledge of Li diffusivities in electrode materials of Li-ion batteries (LIBs) is essential for a fundamental understanding of charging/discharging times, maximum capacities, stress formation and possible side reactions. The literature indicates...

(This article belongs to the Special Issue Electrolyte and Electrode Design for Next-Generation Rechargeable Batteries)
  • Review
  • Open Access
20 Citations
5,374 Views
30 Pages

A Review of Cobalt-Containing Nanomaterials, Carbon Nanomaterials and Their Composites in Preparation Methods and Application

  • Hongfeng Chen,
  • Wei Wang,
  • Lin Yang,
  • Liang Dong and ,
  • Dechen Wang,
  • Xinkai Xu,
  • Dijia Wang,
  • Jingchun Huang,
  • Mengge Lv and
  • Haiwang Wang
  • + 5 authors+ 0 author

14 June 2022

With the increasing demand for sustainable and green energy, electric energy storage technologies have received enough attention and extensive research. Among them, Li-ion batteries (LIBs) are widely used because of their excellent performance, but i...

(This article belongs to the Special Issue Carbon Nanomaterials for Electrochemical Energy Storage)
  • Article
  • Open Access
700 Views
25 Pages

21 July 2026

Hydrogen diffusion plays a central role in the susceptibility of steels to hydrogen embrittlement, yet reported diffusivity values often exhibit significant variability due to differences in experimental methodology. Gaseous hydrogen permeation exper...

(This article belongs to the Special Issue Hydrogen Embrittlement of Metals: Behaviors and Mechanisms (2nd Edition))
  • Review
  • Open Access
23 Citations
8,373 Views
31 Pages

Evaluation of Tungsten—Steel Solid-State Bonding: Options and the Role of CALPHAD to Screen Diffusion Bonding Interlayers

  • Ishtiaque Karim Robin,
  • Tim Gräning,
  • Ying Yang,
  • Syeda Bushra Haider and ,
  • Eric Andrew Lass,
  • Yutai Katoh and
  • Steven John Zinkle
  • + 2 authors+ 0 author

10 August 2023

Critical aspects of innovative design in engineering disciplines like infrastructure, transportation, and medical applications require the joining of dissimilar materials. This study investigates the literature on solid-state bonding techniques, with...

(This article belongs to the Section Welding and Joining)
  • Article
  • Open Access
15 Citations
4,871 Views
14 Pages

A Nano-Rattle SnO2@carbon Composite Anode Material for High-Energy Li-ion Batteries by Melt Diffusion Impregnation

  • Sivarajakumar Maharajan,
  • Nam Hee Kwon,
  • Pierre Brodard and
  • Katharina M. Fromm

22 April 2020

The huge volume expansion in Sn-based alloy anode materials (up to 360%) leads to a dramatic mechanical stress and breaking of particles, resulting in the loss of conductivity and thereby capacity fading. To overcome this issue, SnO2@C nano-rattle co...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
11 Citations
2,633 Views
19 Pages

Spatio-Temporal Dynamics of Diffusion-Associated Deformations of Biological Tissues and Polyacrylamide Gels Observed with Optical Coherence Elastography

  • Yulia M. Alexandrovskaya,
  • Ekaterina M. Kasianenko,
  • Alexander A. Sovetsky,
  • Alexander L. Matveyev and
  • Vladimir Y. Zaitsev

1 March 2023

In this work, we use the method of optical coherence elastography (OCE) to enable quantitative, spatially resolved visualization of diffusion-associated deformations in the areas of maximum concentration gradients during diffusion of hyperosmotic sub...

(This article belongs to the Special Issue Advances in Biomedical Materials: Preparation, Characterization, and Applications)
  • Article
  • Open Access
6 Citations
3,347 Views
13 Pages

Effect of Ni on the Microstructure and Diffusion Behavior at the Interface of WC/High-Speed Steel Composites

  • Hongnan Li,
  • Ling Yan,
  • Linghao Meng,
  • Yan Li and ,
  • Fangfang Ai,
  • Hongmei Zhang and
  • Zhengyi Jiang
  • + 2 authors+ 0 author

18 February 2021

In this study, WC-Ni/high-speed steel composite materials for application as micro-drills were prepared by cold pressing and high-temperature vacuum sintering using a self-designed mold in the laboratory. The effect of Ni on the microstructure and di...

  • Article
  • Open Access
16 Citations
4,158 Views
19 Pages

23 June 2022

Thick high-strength steel plates are increasingly being used for ship structures. Moreover, hydrogen enters the process of manufacturing and service, and large residual tensile stress occurs near the weld. Such stress can facilitate the diffusion and...

(This article belongs to the Special Issue Mechanical Failure and Metal Degradation of Ships and Marine Structures)
  • Article
  • Open Access
2 Citations
5,032 Views
19 Pages

An Experimental Approach to Determining the Average Diffusion Coefficient of Volatile Components in Polymer Waste Materials

  • Chi Nghia Chung,
  • Christian Marschik,
  • Jakub Klimosek,
  • Juraj Kosek and ,
  • Mohamad Hassan Akhras and
  • Georg Steinbichler
  • + 1 author+ 0 author

21 September 2023

One of the major challenges in recycling plastics is the removal of undesired volatile components from the polymeric phase, which may reduce process efficiency and negatively affect product quality. Accordingly, the recycling industry employs a broad...

(This article belongs to the Special Issue Advances in the Recycling, Processing and Use of Plastic Waste II)
  • Article
  • Open Access
4 Citations
3,173 Views
15 Pages

Effect of a Long-Range Dislocation Pileup on the Atomic-Scale Hydrogen Diffusion near a Grain Boundary in Plastically Deformed bcc Iron

  • Yipeng Peng,
  • Rigelesaiyin Ji,
  • Thanh Phan,
  • Xiang Chen and ,
  • Ning Zhang,
  • Shuozhi Xu,
  • Ashraf Bastawros and
  • Liming Xiong
  • + 3 authors+ 0 author

17 August 2023

In this paper, we present concurrent atomistic-continuum (CAC) simulations of the hydrogen (H) diffusion along a grain boundary (GB), nearby which a large population of dislocations are piled up, in a plastically deformed bi-crystalline bcc iron samp...

(This article belongs to the Special Issue Dislocation Mechanics of Crystal/Polycrystal Mechanical Strength Properties)
  • Article
  • Open Access
6 Citations
2,680 Views
12 Pages

Water Diffusion in Additively Manufactured Polymers: Effect of Voids

  • Boyu Li,
  • Konstantinos P. Baxevanakis and
  • Vadim V. Silberschmidt

12 August 2024

This study investigates the effect of void features in additively manufactured polymers on water diffusion, focusing on polyethylene terephthalate glycol (PETG) composites. The additive manufacturing (AM) of polymers, specifically, material extrusion...

(This article belongs to the Special Issue Progress in Polymer Composites, Volume III)
  • Feature Paper
  • Review
  • Open Access
8 Citations
10,558 Views
26 Pages

Three-Dimensional Carbon Nanostructures for Advanced Lithium-Ion Batteries

  • Chiwon Kang,
  • Eunho Cha,
  • Mumukshu D. Patel,
  • H. Felix Wu and
  • Wonbong Choi

26 October 2016

Carbon nanostructural materials have gained the spotlight as promising anode materials for energy storage; they exhibit unique physico-chemical properties such as large surface area, short Li+ ion diffusion length, and high electrical conductivity, i...

(This article belongs to the Special Issue Batteries: Recent Advances in Carbon Materials)

of 51