- Article
Porous 3D Cu layers with the following average parameters: thickness ~35 µm, pore density ~4.0 × 106 cm−2, and pore sizes ~25 µm were electrodeposited from an acidic sulphate electrolyte, and the suitability of different elect...
Porous 3D Cu layers with the following average parameters: thickness ~35 µm, pore density ~4.0 × 106 cm−2, and pore sizes ~25 µm were electrodeposited from an acidic sulphate electrolyte, and the suitability of different elect...
The determination of the electrochemically active surface area (ECSA) of a catalyst layer (CL) of a non-precious metal catalyst is of fundamental importance in optimizing the design of a durable CL for anion exchange membrane (AEM) water electrolysis...
This study aimed to improve the performance of the activated carbon-based cathode by increasing the Li content and to analyze the effect of the combination of carbon and oxidizing agent. The crystal structure and chemical structure phase of Li-high s...
This paper evaluates the influence of the morphology, surface area, and surface modification of carbonaceous additives on the performance of the corresponding cathode in a lithium–sulfur battery. The structure of sulfur composite cathodes with mesopo...
Hierarchical porous carbons are known to enhance the electrochemical features of electrodes in electrochemical capacitors. However, the contribution of surface oxygen and the resulting functionalities and wettability, along with the role of electrica...
This paper describes an experimental evaluation and comparison of Pt/C and Pt-Ru/C electrocatalysts for high-temperature (100–160 °C) electrochemical hydrogen separators, for the purpose of mitigating CO poisoning. The performances of both Pt/C and P...
Graphite felt (GF) is a multi-functional material and is widely used as electrodes of electrochemical devices for energy and environmental applications. However, due to the inherent hydrophobicity of graphite felt, it must be hydrophilically pretreat...
The influence of the types and amounts of oxygen (O), nitrogen (N), and/or phosphorus (P) heteroatoms on the surface of carbon nanotubes (CNTs) on stability and catalytic activity in the oxygen reduction reaction (ORR) was investigated in alkaline me...
Diclofenac (DCF) is a nonsteroidal anti-inflammatory drug to treat pain and inflammatory diseases. The high consumption of the drug leads to a significant change in the ecosystem. With the aim of optimizing a fast screening analysis for DCF detection...
Platinum deposited on dispersed materials has so far been the most demanded catalyst for creating cathodes for a wide range of electrochemical power sources. This paper sets out to investigate the effect of carbon nanotube (CNT) modification by O, N,...
Numerous synthetic techniques for the fabrication of porous metal electrodes were developed in recent decades. A very promising and facile route is the 3D printing of structures, which can be designed directly on the computer first. However, the curr...
In this work, we reveal in detail the effects of high-temperature treatment in air at 600 °C on the microstructure as well as the physico-chemical and electrochemical properties of boron-doped diamond (BDD) electrodes. The thermal treatment of fr...
The detection of dopamine is of great significance for human health. Herein, Pd nanoparticles were loaded on Cu nanoplates (Pd/Cu NPTs) by a novel liquid phase reduction method. A novel dopamine (DA) electrochemical sensor based on the Pd NPs/Cu/glas...
Kinetic data reporting the rate of electron transfer across an electrified interface are of fundamental as well as practical importance. They report the electric current caused by coupling the flow of electrons inside the electronically conducting el...
The aim of the present study was to investigate the electrochemical formation of active chlorine and its subsequent use for the degradation of the pesticide fenobucarb. Initially, the process of electrochemical active chlorine production was investig...
In order to develop highly efficient and stable catalysts for oxygen reduction reaction (ORR) that do not contain precious metals, it is necessary to modify carbon nanotubes (CNT) and define the effect of the modification on their activity in the ORR...
Due to the rapid development of the textile industry and increased consumption of various textiles composed of both synthetic and natural fibers, large amounts of textile waste are produced, leading to environmental and economic problems on a global...
Monitoring the concentration of hydrogen is very important as it is a flammable and explosive gas. Non-Nernstian potentiometric hydrogen sensors hold promising potentials for the sensitive detection of hydrogen. This paper reports the improved H2-sen...
Corrosion continues to be a major concern in industrial systems, causing material degradation and raising maintenance costs. In recent years, plant-derived corrosion inhibitors have gained interest as environmentally friendly alternatives to conventi...
High aspect ratio of WO3-loaded TiO2 nanotube arrays have been successfully synthesized using the electrochemical anodization method in an ethylene glycol electrolyte containing 0.5 wt% ammonium fluoride in a range of applied voltage of 10–40 V for...
The rapid development of electric vehicles, unmanned aerial vehicles, and wearable electronic devices has led to great interest in research related to the synthesis of graphene with a high specific surface area for energy applications. However, the p...
Ammonia (NH3) is vital in modern agriculture and industry as a potential energy carrier. The electrocatalytic reduction of nitrate (NO3−) to ammonia under ambient conditions offers a sustainable alternative to the energy-intensive Haber−B...
Anaerobic digestion (AD) appears to be a popular unit operation in wastewater treatment plant to treat waste activated sludge (WAS) and the produced methane gas can be harvested as renewable energy. However, WAS could inhibit hydrolysis stage during...
Electrochemical detection of amino acids is important due to their correlation with certain diseases; however, most amino acids require a catalyst to electrochemically activate. One common catalyst for electrochemical detection of amino acids are met...
MXene, a new intercalation pseudocapacitive electrode material, possesses a high theoretical capacitance for supercapacitor application. However, limited accessible interlayer space and active sites are major challenges to achieve this high capacitan...
This study investigates the use of electrochemical surface plasmon resonance imaging (eSPRi) to monitor the growth and activity of Shewanella oneidensis biofilms on gold film electrodes. Motivated by the need to understand extracellular electron tran...
Activated carbon (AC) with a very high specific surface area of >3000 m2 g−1 and a number of course particles (average size: 75 µm) was pulverized by means of planetary ball milling under different conditions to find its greatest perfo...
This study investigates lyocell-based activated carbon fibers (ACFs) for their suitability in adsorbing and electrochemically detecting toxic HCl gas. ACFs were prepared via steam activation, varying temperature (800–900 °C) and time (40&nd...
Electrochemical Promotion of Catalysis (EPOC) with alkali ionic conductors has been widely studied in literature due to its operational advantages vs. alkali classical promotion. This phenomenon allows to electrochemically control the alkali promoter...
In this study, activated carbons (ACs) were produced from oil palm leaves (OPL) and palm kernel shells (PKS) using different concentrations (0%, 11%, and 33%) of H3PO4 as the activating agent. The Brunauer–Emmett–Teller (BET) results indi...
An exclusive Cu surface feature has the ability to convert CO2 into hydrocarbons with significant Faradaic efficiency [...]
WO3-decorated TiO2 nanotube arrays were successfully synthesized using an in situ anodization method in ethylene glycol electrolyte with dissolved H2O2 and ammonium fluoride in amounts ranging from 0 to 0.5 wt %. Anodization was carried out at a volt...
A great improvement in food safety and quality controls worldwide has been achieved through the development of biosensing platforms. Foodborne pathogens continue to cause serious outbreaks, due to the ingestion of contaminated food. The development o...
This article reports findings on screen-printed electrodes employed in microfluidic diagnostic devices. The research described includes developing a series of graphene- and other carbon form-based printing pastes compared to their rheological paramet...
Levels of lead (Pb) in tap water that are well below established guidelines are now considered harmful, so the detection of sub-parts-per-billion (ppb) Pb levels is crucial. In this work, we developed a two-step, facile, and inexpensive fabrication a...
The effectiveness of sprayed and aerosolised pH-neutral electrochemically activated solutions (ECAS) containing 150 mg/L of free available chlorine in reducing total bacteria load and artificially inoculated Salmonella enterica serotype Enteritidis 1...
The thermal insulation and integrity of the thermal barrier coating is hampered by the formation of mixed oxide at intermediate bond coat. The existing reported work correlates growth of mixed oxide to the microstructural and phase changes. The track...
Heavy metal pollution in water, particularly Pb ion pollution, has seriously threatened human life and health. Therefore, the manufacture of efficient and sensitive heavy metal ion detection materials is essential. The objective of this study was to...
In this work, composite Ni–P-multiwalled carbon nanotube films were produced by electroless deposition. The main goal was to investigate the influence of multiwalled carbon nanotube loading on the local electrochemical behavior of the composite films...
Biochar, derived from agricultural waste, has gained significant attention as a sustainable material for energy storage applications due to its high surface area, tunable porosity, and environmental benefits. This study investigates the electrochemic...
The development of efficient electron transfer between enzymatic elements and the electrode is considered an important issue in the synthesis and design of bioelectrochemical devices. In this regard, the modification of the surface properties is an e...
Surface plasmon polaritons (SPPs) are optical surface waves propagating along a metal surface. They exhibit attributes such as field enhancement and sub-wavelength localization, which make them attractive for surface sensing, as they are heavily expl...
Carbon-fiber-reinforced polymers (CFRP), being conductive, are capable of supporting cathodic oxygen reduction reactions (ORR) and thus promote galvanic corrosion when coupled to many metallic materials. Hence, understanding cathodic processes at car...
Carbon Fibres (CFs) are widely used in textile-reinforced composites for the construction of lightweight, durable structures. Since their inert surface does not allow effective bonding with the matrix material, the surface treatment of fibres is sugg...
In this work, non-precious electrocatalysts were synthesized using the electrospinning technique. Ni12M8/CNF (M = Cd, Co, and Cu) catalysts were successfully prepared in a fixed ratio to withstand the optimum transition metal co-catalyst in addition...
The electrochemical formation of nanostructured materials is a cost effective route to creating substrates that can be employed in a variety of applications. In this work the surface of a copper electrode was electrochemically restructured in an alka...
Scanning electrochemical microscopy (SECM) is a type of scanning probe microscopy (SPM) where an electrochemical reaction at a microelectrode is used to generate information about an electrochemically (in)active surface in its immediate vicinity. Car...
In this work, we present the preparation and characterization of biomass-derived activated carbon (AC) in view of its application as electrode material for electrochemical capacitors. Porous carbons are prepared by pyrolysis of chestnut seeds and sub...
Biocharcoal (BioC), a cost-effective, eco-friendly, and sustainable material can be derived from various organic sources including agricultural waste. However, to date, complex chemical treatments using harsh solvents or physical processes at elevate...
The pursuit of novel techniques for obtaining dispersed copper-based catalysts is crucial in addressing environmental issues like decarbonization. One method for producing nanostructured metals involves the reduction of their oxides, a technique that...
of 52