Journal Menu
► Journal MenuBiosensors
A section of Sensors (ISSN 1424-8220).
Section Information
Biosensors are defined as analytical devices which convert a biological response into an electrical optical signal. The Biosensors Section of Sensors deals with all the aspects on in situ biochemical detection in many fields: Biomedical research, medical diagnostic, food quality and safety, agroprocess industries, environment, security and defense, etc. The biosensing devices include, but are not limited to: DNA chips; lab-on-a-chip technology; microfluidic devices; and nanobiosensors and nanotechnology used in biosensors. Design, implementation of new biosensing devices, and the underlying science are highly recommended for publication in the Biosensors Section of Sensors.
Editorial Board
Special Issues
Following special issues within this section are currently open for submissions:
- Sensors and Lab-on-a-Chip (Deadline: 10 May 2019)
- Electrochemiluminescence Biosensor (ECL Biosensors) (Deadline: 15 May 2019)
- Label-Free Biosensors II (Deadline: 15 May 2019)
- Nanotechnology and Optical Sensors (Deadline: 25 May 2019)
- Synthesis and Characterization of Optical Sensors for Environmental Monitoring (Deadline: 31 May 2019)
- Point-of-Care Sensing Devices (Deadline: 31 May 2019)
- Fluorescent Biosensors 2019 (Deadline: 31 May 2019)
- Context Awareness in Health Care through Ubiquitous Sensing (Deadline: 1 June 2019)
- Wearable Sensors and Devices for Healthcare Applications (Deadline: 15 June 2019)
- Sensors Integration in Organ-on-chip & Microfluidic Systems (Deadline: 15 June 2019)
- Microwave Sensors for Biomedical Applications (Deadline: 15 June 2019)
- Wearable and Nearable Biosensors and Systems for Healthcare (Deadline: 15 June 2019)
- Assistance Robotics and Biosensors 2019 (Deadline: 20 June 2019)
- Electrochemical Nanobiosensors (Deadline: 28 June 2019)
- E-Skin Sensors (Deadline: 30 June 2019)
- Sensors and Wearable Assistive Devices (Deadline: 30 June 2019)
- Aptamers and Applications (Deadline: 30 June 2019)
- Label-Free Sensor/Biosensors for Biomedical and Environmental Monitoring (Deadline: 15 July 2019)
- Inkjet Production of Sensors (Deadline: 15 July 2019)
- Wearable Biomedical Sensors 2019 (Deadline: 20 July 2019)
- Surface Plasmon Resonance Sensing 2019 (Deadline: 20 July 2019)
- Smartphone-Based Biosensing (Deadline: 31 July 2019)
- Advanced Photonic Biosensors (Deadline: 31 July 2019)
- Advanced Optical Biosensors (Deadline: 1 August 2019)
- Amperometric Sensing (Deadline: 15 August 2019)
- Surface Plasmon Resonance (SPR)-Based Sensors and Their Biological Applications (Deadline: 30 August 2019)
- Chemical and Biological Sensors: Devices and Systems (Deadline: 31 August 2019)
- Enzyme-Based Biosensors for Biomedical Analysis (Deadline: 15 September 2019)
- Single Molecule Detection on Biosensors (Deadline: 15 September 2019)
- Thin Film Biosensing (Deadline: 15 September 2019)
- Two-Dimensional Materials Based Sensors (Deadline: 30 September 2019)
- Electrochemical DNA Sensors (Deadline: 30 September 2019)
- Microfluidic Platforms for Environmental Monitoring and Medical Diagnostics (Deadline: 30 September 2019)
- Microwave and RF Biosensors (Deadline: 30 September 2019)
- Wearable Sensors in the Evaluation of Gait and Balance in Neurological Disorders (Deadline: 1 October 2019)
- Repeated or Continuous Glucose Monitoring: Sensors, Devices and Applications (Deadline: 20 October 2019)
- Fiber Optic Sensors with Plasmonic Nanostructures and Gratings: Applications and New Perspectives (Deadline: 31 October 2019)
- New Trends in Electrochemical Sensors for Biomedical Applications (Deadline: 31 October 2019)
- Optical and Fluorescent Sensors for Environment (Deadline: 31 October 2019)
- Optical Bio Sensing (Deadline: 15 November 2019)
- Surface Acoustic Wave Biosensors and Microfluidic Devices (Deadline: 30 November 2019)
- EMG Sensors and Applications (Deadline: 1 December 2019)
- Fibre-Optic Biosensing (Deadline: 20 December 2019)
- Nanoparticles for Drug Delivery and Biosensing Applications (Deadline: 30 December 2019)
- Novel Approaches to EEG Signal Processing (Deadline: 31 December 2019)
- 3D Printed Sensors and Actuators (Deadline: 31 December 2019)
- Carbon based ECG Sensors (Deadline: 31 January 2020)
- Disposable Optical Biosensors (Deadline: 29 February 2020)
- Water and Health pH Sensors (Deadline: 15 March 2020)
- NanoBioSensing of Extracellular Vesicles in Biofluids (Deadline: 31 March 2020)
- Wearable, Smart, Pervasive, and Unconventional Sensing for Health Monitoring: Solutions from Today and for Tomorrow (Deadline: 30 November 2020)
