Environmental Sensing
A section of Sensors (ISSN 1424-8220).
Section Information
Environmental Sensing Section publishes original peer-reviewed papers in the field of sensors and sensing technology for environmental applications. Both original research articles and comprehensive reviews are considered.
Potential topics:
- Gas sensing
- Humidity sensing
- Temperature sensing
- Nanomaterial and carbon-materials-based sensors for environmental monitoring
- Semiconductor- and CMOS-based sensors for environmental monitoring
- Electrochemical sensing for environmental monitoring
- Fluorescent and colorimetric sensors for environmental detection
- Microfluidic technology in environmental monitoring or medical diagnostics
- Biosensing for environmental monitoring
- Toxic and hazardous metal detection and monitoring
- Sensing technology in air pollution, water pollution, noise pollution, light pollution, heat pollution, light pollution, oil spills, etc.
- Sensing technology in agriculture and food security
- Soil monitoring
- Urban environmental monitoring
- Industrial environmental monitoring
- Internet of Things and sensor network in environmental monitoring
- Healthcare environmental monitoring
- Marine environmental monitoring
- Monitoring and evaluation for global warming and climate change
- Remote sensing focused on environmental monitoring
- Remote sensing applications in geo-information and geophysics
- Sensing technology in oceans, coastal zones, and inland waters
- Natural disasters monitoring, warning, and response
- Ecological monitoring
- Electric and electromagnetic measurement for environmental engineering
- In situ techniques in environmental monitoring
- Environmental data and big data processing and dissemination, image processing
Editorial Board
Topical Advisory Panel
Special Issues
Following special issues within this section are currently open for submissions:
- Novel Sensors for Structural Health Monitoring: 2nd Edition (Deadline: 25 May 2025)
- Advanced Sensors for Gas Monitoring (Deadline: 31 May 2025)
- Human-Centered Solutions for Ambient Assisted Living (Deadline: 20 June 2025)
- Advanced Sensor and Measurement Technologies in Astronomy and Astrophysics (Deadline: 25 June 2025)
- Sensors and Extreme Environments (Deadline: 30 June 2025)
- Sensor-Based Structural Health Monitoring of Civil Infrastructure (Deadline: 30 June 2025)
- Advances in Computer Vision and Artificial Intelligence Technologies for Industrial Robotics (Deadline: 15 July 2025)
- Artificial Intelligence and Sensors Technology in Smart Cities (Deadline: 25 July 2025)
- Multi-Source Image Fusion, Restoration, and Understanding and Its Application in Sensing (Deadline: 25 July 2025)
- Advancing Land Monitoring through Synergistic Harmonization of Optical, Radar and Lidar Satellite Technologies (Deadline: 31 July 2025)
- Advanced Physical Sensors for Environmental Monitoring (Deadline: 1 August 2025)
- Advanced Environmental Sensing Towards Acoustic Monitoring and Modeling: Applications and Challenges (Deadline: 15 September 2025)
- Advanced Sensors for Monitoring and Detection in Geotechnical Engineering (Deadline: 25 September 2025)
- Advanced Sensing Systems for Biological Monitoring (Deadline: 30 September 2025)
- Sensors for Water Quality Monitoring and Assessment (Deadline: 30 September 2025)
- Sensor-Based Systems for Environmental Monitoring and Assessment (Deadline: 30 September 2025)
- Acoustic Sensing and Monitoring in Urban and Natural Environments (2nd Edition) (Deadline: 15 October 2025)
- Emerging Trends and Novel Materials for Low-Cost Environmental Sensors (Deadline: 25 October 2025)
- Electrochemical Sensors and Biotechnology for Sustainable Water Quality Monitoring and Bioenergy Solutions (Deadline: 30 October 2025)
- Remote Sensing Applications in Ecosystem Modeling and Landscape Dynamics (Deadline: 31 October 2025)
- Space Weather—Radiation Damage to Materials and Electronic Devices: Mitigation Risks (Deadline: 20 November 2025)
- Artificial Intelligence-Based Target Recognition and Remote Sensing Data Processing (Deadline: 25 November 2025)
- Virtual and Augmented Sensing Techniques via Embedded ML Models for IoT Measurement Infrastructures (Deadline: 25 November 2025)
- Novel Sensing Technologies for Environmental Monitoring and Detection (Deadline: 25 November 2025)
- Nanostructures and Nanocrystals for Sensing Studies (Deadline: 25 November 2025)
- Photovoltaic Sensors for Wastewater Treatment (Deadline: 15 December 2025)
- Real-Time Monitoring of Individual Living Organisms (Deadline: 15 December 2025)
- Sensors and Instruments for Ocean Environment (Deadline: 20 December 2025)
- Ubiquitous Sensors in Environmental Monitor, Precision Agriculture, and Food Safety (Deadline: 31 December 2025)
- Advancements in Fire Detection Technologies: Innovations for Extreme Environments (Deadline: 31 December 2025)
- New Nanomaterials: Optimization and Application in the Field of Environmental Sensors (Deadline: 31 December 2025)
- Remote Sensing Technology for Agricultural and Land Management (Deadline: 25 January 2026)
- Advanced Sensing Techniques for Environmental and Energy Systems (Deadline: 25 February 2026)
- Sensor Technologies for Ocean Environments: Impact Assessment, Monitoring and Protection—Second Edition (Deadline: 31 March 2026)
- Integration of New Disruptive Technologies into Digital Geological Mapping (Deadline: 25 July 2026)
