Fresh-cut cucumbers (Cucumis sativus L.) are appreciated by consumers for their convenience and freshness. In the process of home cooking and in the food industry, different cutting methods for cucumbers are needed. In order to explore the effect of...
This literature review focuses on titanium alloys, which are crucial in modern manufacturing due to their excellent properties. The review covers their classification, machining challenges, and advanced cutting methods. Different alloy types (α...
Background: The ankle joint is among the most vulnerable areas for injuries during daily activities and sports. This study focuses on individuals with chronic ankle instability (CAI), comparing the biomechanical characteristics of the lower limb duri...
In the modern fish processing industry, flat fishes play an important role. They are processed into a final product in the form of a fillet during the skinning operation, which is carried out on machines operating in automated production lines. These...
With problems of low cutting efficiency, poor forming quality, and low control accuracy in large-section semi-coal rock roadway tunneling, comprehensive coal tunneling seriously lags behind fully mechanized mining. A fuzzy PID control method was prop...
In the field of agricultural machinery, various empirical field tests are performed to measure the tillage force for precision tillage. However, the field test performance is costly and time-consuming, and there are many constraints on weather and fi...
During the cutting process, large quantities of emitted heat are concentrated on a small surface area of the interface between the workpiece and the cutting edge. The resultant very high temperature significantly affects the tool life. Knowledge of m...
The aim of this research was to determine the most productive tree-cutting methods, and the factors influencing them, in flat and sloping terrains in tree plantations in Brazil. The study utilized drone-captured video material from harvesting operati...
A new internal cooling method by cutting-edge-adjacent plural microchannels (CPM) is proposed to overcome the limitation of cutting temperature reduction. External cooling methods have been used in practice, and internal cooling methods have been stu...
Measuring the radial error motion of a spindle during the cutting process is important for monitoring the machining quality of the workpiece and spindle running condition. The problem of long separation time encountered in the application of traditio...
The dynamics of high-pressure gas flow injected through a nozzle during a thermal cutting process has an important effect on cutting performance. In this study, an actual gas flow condition inside a cut kerf of a plasma cut sample was simulated by co...
This paper focuses on obtaining fundamental data for optimizing the design of intelligent equipment for cutting natural rubber and its key components. It uses natural rubber bark as the research subject and employs specific experimental apparatus to...
To acquire a satisfying cutting effect during medium-length hole blasting driving of rock tunnels, an improved wedge cutting blasting method with supplementary blasting of the center holes was proposed. Initially, the cavity forming mechanism of the...
The cutting forces that occur during machining cause static and dynamic deformations of the machine–tool–workpiece system. In general, the cutting force is spatial. However, knowledge of the tangential component of the cutting force is cr...
The method of cutting motor core sheets causes a change in their magnetic properties and core losses, especially additional losses. Reducing motor losses is very important because of the fulfillment of increasingly stringent requirements set by inter...
In the process of metal cutting, the cutting performance of cutting tools varies with different parameter combinations, so the results of the performance indicators studied are also different. So in order to achieve the best performance indicator it...
As research progresses, the surface texture tool can significantly reduce the cutting heat and cutting force. However, the tool surface texture width, depth, and spacing also have an impact on the cutting performance. Using the Taguchi method and fin...
The Contour Method is a well-established destructive technique for determining cross-sectional maps of residual stress in manufactured metallic components. The validity of the technique is dependent on linear elastic relaxation of residual strains ac...
The use of selected multi-criteria decision methods for the optimization of cutting processes by abrasive water jet methods is increasingly being used in industrial processes. This is due to the complexity of the processes and the need to reduce oper...
The Cartesian cut-cell method is one of the most promising methods for computational fluid dynamics due to its sharp interface treatment. However, the Cartesian cut-cell method and other Cartesian mesh solvers have difficulty with concentrating grid...
Optimization of cutting parameters in micro-milling is an important measure to improve surface quality and machining efficiency of the workpiece. Investigation of micro-milling forces prediction plays a positive role in improving machining capacity....
This work investigates the milling of the surface of glass and carbon fiber-reinforced plastics using tools with a polycrystalline diamond insert. The milling process was conducted under three different conditions, namely without the use of a cooling...
In this study, we aimed to optimize the cutting parameters that affect the minimum temperature and power consumption in the turning of AISI 52100 bearing steel. For this, the Box-Behnken experimental design method, which was used for the lowest numbe...
High-pressure jet grouting is widely used in the construction of cut-off wall in hydraulic engineering. Compared to the high-pressure jet grouting used for foundation improvement, the high-pressure jet grouting cut-off wall of hydraulic engineering h...
During the harvesting of cut-stem vegetables, the structural parameters of cutters have an important influence on the harvesting effect. Structural parameters of stalks directly affect the cutting effect of the cutter. The thickness of the stalk xyle...
The appearance of cracks in brittle materials in general and in marble, in particular, is a problem in the hydro-abrasive jet cutting process. In this paper is presented a method to reduce the appearance of cracks when cutting with a hydro-abrasive j...
The non-open-cut method is used for constructing tunnels under existing roads without blocking traffic. Various non-open-cut methods use pipe roofs made of medium- and large-diameter steel pipe piles. However, the risk of ground settlement or heave i...
The objective of this work is to analyze the influence of the vibration-assisted turning process on the machinability of S235 carbon steel. During the experiments using this vibrational machining process, the vibrational amplitude and frequency of th...
An automatic hole-cutting method is proposed to search donor cells between a structured Cartesian mesh and an overlapping body-fitted mesh. The main flow is simulated on the structured Cartesian mesh and the viscous flow near the solid boundary is si...
Prediction of rock fracturing capacity demands particular requirements for the exploitation of mineral resources, especially for the parameter design of conical pick performance for hard rock fragmentation, which must take into account differences in...
This study established a numerical model for a foundation pit at the Zhongyilu Station of the Wuhan Metro Line 12, using Plaxis3D version 2021 finite element software to examine the horizontal displacement of the diaphragm wall, ground surface settle...
In West Sumatra, Indonesia, a high-yield perennial rice cropping method called SALIBU was recently reported, in which the most unique feature is double cutting (DC) at harvest and after harvest. The objective of this study was to verify the ratooning...
A method for the accurate calculation of the cut-off wavenumbers of a waveguide with an arbitrary cross section and a number of inner conductors is demonstrated. Concepts of integral and infinite-matrix (summation) operator-valued functions depending...
In the paper, the influence of the electrodischarge dressing methods of superhard grinding wheels on shaping their cutting ability are presented. The results of research concerning the influence of dressing conditions using a stationary electrode, ro...
Corner radius end mills (CREMs) are widely used in machining due to their unique tool geometry, which improves surface quality. Variations in cutting force during machining significantly impact machining quality. Therefore, precisely predicting cutti...
The aim of this study was to unravel the methodological challenges when exploring nutritional inadequacy, involving 608 healthy pregnant women. The usual intake of twenty-one nutrients was recorded by employing a validated FFQ. Simulated datasets of...
Mechanical mining is a widely used method of separating materials from the face to obtain a useful mineral (e.g., coal, metal ores, salts, and diamonds), to make underground workings (e.g., mine galleries, tunnels, and underground garages), level roa...
This paper proposes a multi-equipment task assignment model for the horizontal stripe pre-cut mining method to address the problem of cooperative scheduling operation of multi-equipment in underground metal mines under complex constraints. The model...
This paper presents a topology optimization (TopO) method for conjugate heat transfer (CHT), with turbulent flows. Topological changes are controlled by an artificial material distribution field (design variables), defined at the cells of a backgroun...
In evaluating the construction safety of the building in the subway tunnel using the cover-and-cut method, the main objective is to analyze the diaphragm wall, the central pillar, and the roof. This article conducted a blasting vibration test based o...
This article aiming at the lack of research on the influence of rock clamp production on cutting blasting under high in-situ stress conditions and the lack of rock damage criteria for RHT constitution in numerical simulation. Combined with the critic...
The stress distributions in a thick welded specimen with a partial repair weld were measured with the three-cut contour method. The longitudinal stress maps in the original weld and the repair weld were obtained and the transverse stress map at the w...
A fully penetrating cut-off wall is a vertical seepage barrier that fully penetrates an aquifer and is embedded in an underlying aquitard to a certain depth. Groundwater seepage with this type of wall occurs through three paths: leakage through the b...
This paper presents the preparation of Z-cut near-stoichiometric lithium niobate (NSLN) wafers using a combined process of the lithium-rich Czochralski growth and diffusion methods. The fabricated Z-cut NSLN wafers exhibited outstanding comprehensive...
The wastewater conveyance systems in the United States are facing severe structural challenges, with the nation’s overall wastewater infrastructure receiving a critically low grade of D- from the American Society of Civil Engineers (ASCE). Inno...
Tungsten carbide (WC) is well known as one of the hardest materials widely used in machining, cutting and drilling, especially for cutting tools production. Knowing fracture toughness grants the opportunity to prevent catastrophic wear of a tool. Mor...
In the industrial machining of wood–plastic composites, optimization of cutting parameters is key to improving workpiece machinability. To explore the influence of different milling methods of straight-tooth milling, helical milling, and tapere...
In recent years, much research has been devoted to the evaluation of physical phenomena and the technological effects of precise and micromilling processes. However, the available current literature lacks synthetic work covering the current state of...
To address the challenging stope roof support problem associated with the the Upward Two-Step Staggered-Drift Cut-and-Fill Mining Method (UTSCF method) under fractured surrounding rock conditions, this study establishes an elasto-plastic zoning model...
This article focuses on the energy density alteration during non-pillar mining method of goaf-side entry retaining by roof cutting (GERRC) and adjacent working face mining. We also studied the support control strategy of goaf-side roadway. Numerical...
of 212