Skip to Content

5,076 Results Found

  • Article
  • Open Access
6 Citations
3,822 Views
22 Pages

23 August 2021

This article is focused on the research of passive cooling beams and increasing their cooling capacity. A passive cooling beam with four tubes was chosen as a model. A mathematical model was built using the corresponding criterion equations to captur...

(This article belongs to the Special Issue Experimental and Numerical Methods in Fluid Mechanics and Energy)
  • Article
  • Open Access
12 Citations
3,535 Views
18 Pages

Film cooling is widely applied as an effective way to maintain the turbine blade temperature at an acceptable level. The present paper investigates the overall cooling effectiveness and flow structure by performing conjugate heat transfer simulations...

(This article belongs to the Section Electromechanical Energy Conversion Systems)
  • Article
  • Open Access
9 Citations
3,873 Views
15 Pages

5 April 2023

Shaped cooling holes have received considerable attention in recent years due to their potential to improve heat transfer while minimizing pressure drop. In this study, the effects of lobe-shaped cooling holes on film cooling performance and turbulen...

(This article belongs to the Section Energy Science and Technology)
  • Feature Paper
  • Article
  • Open Access
8 Citations
3,336 Views
17 Pages

11 November 2020

This study investigated the effect of adding two sister holes placed downstream the main hole on film cooling by employing large eddy simulation. Here, film-cooling flow fields from a triple-hole system inclined by 35° to a flat plate at blowing...

(This article belongs to the Special Issue CFD Based Researches and Applications for Fluid Machinery and Fluid Device)
  • Feature Paper
  • Review
  • Open Access
17 Citations
6,306 Views
21 Pages

24 November 2022

Film cooling has dramatically contributed to the performance improvement of gas turbines, as it is a very effective cooling technique for gas turbines. Large eddy simulation (LES) began to be used in the study of film cooling 20 years ago, and meanin...

(This article belongs to the Special Issue Advanced Technologies in Gas Turbines)
  • Feature Paper
  • Review
  • Open Access
6 Citations
4,649 Views
30 Pages

6 September 2024

Effusion cooling is often regarded as one of the critical techniques to protect solid surfaces from exposure to extremely hot environments, such as inside a combustion chamber where temperature can well exceed the metal melting point. Designing such...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
9 Citations
3,885 Views
12 Pages

Precise Simulation of Heat-Flow Coupling of Pipe Cooling in Mass Concrete

  • Peng Yu,
  • Ruiqing Li,
  • Dapeng Bie,
  • Xiancai Liu and ,
  • Xiaomin Yao and
  • Yahui Duan
  • + 1 author+ 0 author

8 September 2021

For a long time, temperature control and crack prevention of mass concrete is a difficult job in engineering. For temperature control and crack prevention, the most effective and common-used method is to embed cooling pipe in mass concrete. At presen...

(This article belongs to the Special Issue Concrete and Construction Materials)
  • Feature Paper
  • Article
  • Open Access
5 Citations
4,214 Views
21 Pages

24 October 2019

In this paper, a general numerical methodology is developed and validated for the simulation of steady as well as transient thermal and electrical behaviors of thermoelectric generator (TEG)-based air flow self-cooling systems. The present model prov...

(This article belongs to the Special Issue Renewable Energy and High Efficiency Energy Systems Applied to Aerospace Vehicles and Facilities)
  • Article
  • Open Access
7 Citations
5,696 Views
9 Pages

17 April 2017

The development of melt spinning technique for preparation of metallic glasses was summarized. The limitations as well as restrictions of the melt spinning embodiments were also analyzed. As an improvement and variation of the melt spinning method, t...

  • Feature Paper
  • Article
  • Open Access
7 Citations
3,229 Views
24 Pages

Experimental Characterization and Numerical Simulation of a Low-Scale Personal Cooling System with Integrated PCM

  • Francesco Miccoli,
  • Augusto Cavargna,
  • Luigi Mongibello,
  • Marcello Iasiello and
  • Nicola Bianco

26 February 2024

Phase Change Materials (PCMs), among the existing thermal storage technologies, are characterized by higher storage densities than conventional storage systems, and absorb and release thermal energy at nearly constant temperatures. In recent years, t...

(This article belongs to the Special Issue Selected Papers from the SDEWES 2023 Conference on Sustainable Development of Energy, Water, and Environment Systems)
  • Feature Paper
  • Article
  • Open Access
4 Citations
3,173 Views
18 Pages

16 November 2021

The effects of pulsations in the main flow on film cooling from a cylindrical hole with a spanwise injection angle (orientation angle) are analyzed using numerical methods. The hole is located on a flat plate with a 35° inclined injection angle, and...

(This article belongs to the Special Issue Advances in Gas Turbine Performance, Heat Transfer and Aerodynamics)
  • Article
  • Open Access
20 Citations
4,093 Views
14 Pages

Simulation of the Cooling Effect of Porous Asphalt Pavement with Different Air Voids

  • Lei Gao,
  • Zhanqi Wang,
  • Jianguang Xie,
  • Yanping Liu and
  • Sicheng Jia

4 September 2019

Porous asphalt pavement shows lower internal temperature than does dense-graded asphalt pavement under high temperature conditions in summer. To study the cooling effect of porous asphalt pavement, the thermophysical properties of a dense-graded asph...

  • Article
  • Open Access
3 Citations
4,754 Views
15 Pages

Cooling Methods for a Typical Printed Circuit Board Assembly in Spacecraft: Simulation and Experiment

  • Sheng Wang,
  • Changxu Song,
  • Li Zhang,
  • Fengjiao Hu and ,
  • Feng Dong,
  • Dapeng Liang,
  • Jiangtao Liu,
  • Jingyu Zhang and
  • Sihong Chen
  • + 4 authors+ 0 author

In this study, cooling methods for a typical spacecraft circuit board assembly are investigated. The power dissipation of the assembly is more than 100 W, and the max heat dissipation of a component is 16 W, making it very difficult to cool the assem...

  • Article
  • Open Access
9 Citations
3,128 Views
21 Pages

Numerical Simulation of Surface Thermal Analysis and Cooling Optimization of Continuous Casting Rolls

  • Guangwei Cheng,
  • Ningxia Yin,
  • Qiaoxin Zheng,
  • Yuming Qiu and
  • Junqi Chen

30 December 2024

In many steel mills, the working life of continuous casting machine rollers is relatively short, requiring frequent replacement and negatively impacting production efficiency. To effectively extend the service life of these rollers, this study focuse...

(This article belongs to the Special Issue Microstructure and Mechanical Behaviour of Structural Materials: 2nd Edition)
  • Article
  • Open Access
15 Citations
4,650 Views
17 Pages

29 November 2020

The effects of bulk flow pulsations on film cooling in gas turbine blades were investigated by conducting large eddy simulation (LES) and Reynolds-averaged Navier–Stokes simulation (RANS). The film cooling flow fields under 32 Hz pulsation in t...

(This article belongs to the Special Issue Turbomachinery: Theory, Design and Application)
  • Article
  • Open Access
9 Citations
5,356 Views
18 Pages

10 October 2023

Injection molds are production tools that require detailed analysis based on the quality of the resulting part, the impact on cycle times, and the expected production volume. Cooling channels also play a critical role in mold performance and product...

(This article belongs to the Special Issue Computational and Experimental Approaches in Polymeric Materials)
  • Article
  • Open Access
11 Citations
7,119 Views
16 Pages

19 November 2018

This paper is devoted to modelling of temperature distribution and its time evolution in rooms with specific thermal insulation and heat transfer for different external conditions. The simulation results should help to design the room architecture an...

  • Article
  • Open Access
10 Citations
3,855 Views
19 Pages

8 April 2021

The forward expansion hole improves the film cooling effectiveness by reducing the penetration of the coolant jet into the main flow compared to the cylindrical holes. In addition, compound angles improve the film cooling effectiveness by promoting t...

(This article belongs to the Special Issue Gas Turbine Cooling Systems Design and Analysis)
  • Article
  • Open Access
8 Citations
4,009 Views
18 Pages

Numerical Simulation of the Air Cooling System for Scientific Payload Rack on a Space Station

  • Yuan-Yuan Lou,
  • Ben-Yuan Cai,
  • Yun-Ze Li,
  • Jia-Xin Li and
  • En-Hui Li

23 November 2020

The space scientific payload rack is a multifunctional experimental platform, and the requirements of the environmental temperature index are different for diversified experimental modules inside. The air cooling system is an important part of the ra...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
585 Views
24 Pages

26 February 2026

Gas film cooling is a widely adopted technique for the thermal protection of gas turbine blades. However, a trade-off exists between reduced cooling effectiveness and increased aerodynamic losses. The underlying mechanism was investigated through lar...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
5 Citations
2,328 Views
24 Pages

28 December 2023

The effects of the coolant pulsation and the plasma aerodynamic actuation (PAA) on the film cooling are herein explored via large eddy simulations. The electrohydrodynamic force derived from the PAA was solved through the phenomenological plasma mode...

  • Article
  • Open Access
996 Views
33 Pages

Experimental and Simulation Research on Control Strategy Optimization of Airborne Radar Liquid Cooling System

  • Jun Li,
  • Xiang Sun,
  • Qingmeng Li,
  • Yang Jiang and ,
  • Li Chen,
  • Yang Gao,
  • Bo Zhou and
  • Erlin Meng
  • + 3 authors+ 0 author

12 February 2026

In the airborne environment, radar electronic systems feature diverse operation modes and complex working conditions, which impose stringent requirements on the temperature control accuracy of the cold plate liquid cooling system. The operational sta...

  • Article
  • Open Access
3 Citations
2,234 Views
28 Pages

12 October 2024

This study introduces an innovative numerical approach to simulate the construction of large concrete structures incorporating post-cooling systems employing the finite element method (FEM). The proposed methodology integrates critical construction p...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
10 Citations
5,240 Views
13 Pages

A ducted photovoltaic façade (DPV) unit was simulated using computational fluid dynamics (CFD). This is Part II of the study, which is a repetition of Part I—a previous experimental study of the ducted photovoltaic unit with buoyancy coo...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
14 Citations
4,590 Views
18 Pages

13 December 2018

The solar absorption-subcooled compression hybrid cooling system (SASCHCS) is potentially an economical solution for high-rise buildings. The hybrid system is subjected to off-design operation frequently, owing to the changes in solar irradiance and...

(This article belongs to the Special Issue Sciences in Heat Pump and Refrigeration)
  • Article
  • Open Access
2 Citations
1,710 Views
12 Pages

Validation of Experimental Cooling Performance of Multi-Stage Thin-Film Thermoelectric Devices via Numerical Simulation

  • Yu Ning,
  • Longzhou Li,
  • Ping Wei,
  • Shaoqiu Ke and ,
  • Wanting Zhu,
  • Xiaolei Nie,
  • Danqi He,
  • Mingrui Liu and
  • Wenyu Zhao
  • + 4 authors+ 0 author

In-plane thermoelectric thin-film cooling devices are considered a promising solution for thermal management in electronic systems. However, the actual cooling performance is far below that of regular bulk cooling devices, making the design of thin-f...

  • Review
  • Open Access
21 Citations
6,689 Views
43 Pages

11 May 2022

A heat pump for simultaneous heating and cooling (HPS) is a refrigeration machine by which the productions of heating and cooling energies are simultaneously valorized. This introductory article presents the uses of heat pump productions under the fo...

(This article belongs to the Special Issue Modelling and Simulation of Heat Pumps for Simultaneous Heating and Cooling)
  • Article
  • Open Access
14 Citations
4,536 Views
27 Pages

3 February 2023

Process cooling for food production is an energy-intensive industry with complex interactions and restrictions that complicate the ability to utilize energy-flexibility due to unforeseen consequences in production. Therefore, methods for assessing th...

(This article belongs to the Special Issue Energy Challenges and Smart Applications in Production Systems)
  • Article
  • Open Access
5 Citations
3,419 Views
14 Pages

17 November 2024

This technical paper delves into the creation and application of an enhanced mathematical model for semi crystalline thermoplastics based on the Pressure-Volume-Temperature (PVT) Two Domain Tait Equation. The model is designed to incorporate the impa...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
2 Citations
1,796 Views
22 Pages

Climate-Based Assessment of Radiative Cooling Potential Using Energy Simulation and Atmospheric Indicators

  • Xiaolin Ding,
  • Shanshan Li,
  • Chenxi Hu,
  • Qian Yu and ,
  • Hiroatsu Fukuda and
  • Weijun Gao
  • + 1 author+ 0 author

14 November 2025

Rising global temperatures are driving an urgent need for buildings that consume less energy while maintaining comfort. Cooling demand is surging worldwide, yet conventional air-conditioning remains energy-intensive and carbon-heavy. Against this bac...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Feature Paper
  • Article
  • Open Access
11 Citations
4,357 Views
20 Pages

21 January 2021

A large eddy simulation (LES) was performed for film cooling in the gas turbine blade involving spanwise injection angles (orientation angles). For a streamwise coolant injection angle (inclination angle) of 35°, the effects of the orientation an...

(This article belongs to the Special Issue CFD Applications in Energy Engineering Research and Simulation)
  • Article
  • Open Access
3 Citations
3,310 Views
12 Pages

Study on Rapid Simulation of the Pre-Cooling Process of a Large LNG Storage Tank with the Consideration of Digital Twin Requirements

  • Yunfei Zhao,
  • Caifu Qian,
  • Guangzhi Shi,
  • Mu Li and ,
  • Zaoyang Qiu,
  • Baohe Zhang and
  • Zhiwei Wu
  • + 2 authors+ 0 author

15 July 2024

The pre-cooling of a large LNG storage tank involves complex phenomena such as heat transfer, low-temperature flow, gas displacement, and vaporization. The whole pre-cooling process could take up to 50 h. For large-scale, full-capacity storage tanks,...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
7 Citations
4,868 Views
14 Pages

Lithium-ion batteries are extensively used for electric vehicles, owing to their great power and energy density. A battery thermal management system is essential for lithium-ion batteries. With the extensive utilization of liquid-cooling approaches f...

(This article belongs to the Special Issue Electrochemical, Thermal and Safety Properties of Lithium and Post-Li Materials and Cells)
  • Article
  • Open Access
7 Citations
3,678 Views
15 Pages

19 November 2020

The paper is devoted to computer simulations of the distribution and time evolution of the temperature in a wooden house in summer. The goal of simulations was to assess the effect of covering walls inside the house with a PCM (phase change material)...

(This article belongs to the Section G: Energy and Buildings)
  • Article
  • Open Access
3,257 Views
13 Pages

27 October 2023

Olefins are crucial building blocks for petrochemical industry, serving as raw materials for the production of various products such as plastics, synthetic fibers, detergents, solvents, and other chemicals. In FCC, heavy petroleum feedstocks are inje...

(This article belongs to the Special Issue Recent Advances in Dynamic Phenomena)
  • Article
  • Open Access
3 Citations
3,306 Views
18 Pages

4 April 2021

Energy consumption is a major sustainability issue. One of the largest portions of energy consumption in buildings comes from cooling. This paper proposes the use of L-shaped minilouvers as shading, which both improve useful daylight illuminance (UDI...

  • Article
  • Open Access
6 Citations
4,684 Views
11 Pages

Thermal energy storage systems can be determinant for an effective use of solar energy, as they allow to decouple the thermal energy production by the solar source from thermal loads, and thus allowing solar energy to be exploited also during nightti...

(This article belongs to the Special Issue Solar Thermal Systems)
  • Article
  • Open Access
11 Citations
3,268 Views
15 Pages

Quenching Stress of Hot-Rolled Seamless Steel Tubes under Different Cooling Intensities Based on Simulation

  • Zhenlei Li,
  • Rui Zhang,
  • Dong Chen,
  • Qian Xie and ,
  • Jian Kang,
  • Guo Yuan and
  • Guodong Wang
  • + 2 authors+ 0 author

16 August 2022

Large residual stress occurs during the quenching process of hot-rolled seamless steel tubes, which results in bending, cracking, and ellipticity exceeding standards and seriously affects the quality of hot-rolled seamless steel tubes. In addition, t...

(This article belongs to the Special Issue Deformation, Fracture and Microstructure of Metallic Materials)
  • Article
  • Open Access
2 Citations
3,256 Views
22 Pages

6 June 2024

The use of film cooling is crucial to avoid high metal temperatures in gas turbine applications, thus ensuring a high lifetime for vanes and blades. The complex turbulent mixing process between the coolant and the main flow requires an accurate numer...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
3 Citations
2,913 Views
19 Pages

Numerical Simulation of Gas-Solid Two-Phase Heat Transfer in a Kaolin Cyclone Cooling System

  • Shuai Xu,
  • Junlin Xie,
  • Shuxia Mei,
  • Feng He and ,
  • Runguo Li,
  • Yuhua Deng,
  • Chao Zhang and
  • Xianming Zheng
  • + 3 authors+ 0 author

27 April 2023

The kaolin suspension calcination technology is currently gaining attention as a new process of calcining kaolin. In this paper, the cooling system of the kaolin suspension calcination process designed by CBMI Construction Co., Ltd. is simulated usin...

  • Article
  • Open Access
4 Citations
3,143 Views
19 Pages

31 July 2023

In the fast-growing but also highly competitive market of battery-powered power tools, cell-pack-cooling systems are of high importance, as they guarantee safety and short charging times. A simulation model of an 18 V power tool battery pack was deve...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
2 Citations
1,695 Views
30 Pages

4 November 2025

The proton-exchange membrane fuel cell (PEMFC) generates a significant reaction and ohmic heat during operation, imposing stringent cooling requirements. This study employs a three-dimensional, non-isothermal, steady multiphase multiphysics model to...

(This article belongs to the Section A5: Hydrogen Energy)
  • Article
  • Open Access
1 Citations
4,010 Views
36 Pages

22 August 2019

This article presents the computational simulation process and the operation algorithms of the VAV and VRV systems, for indoor space conditioning, with extensive physical cooling and heat recovery. Through the introduction of appropriate operation al...

(This article belongs to the Section Economic and Business Aspects of Sustainability)
  • Article
  • Open Access
9 Citations
3,757 Views
14 Pages

This study presents a bionic structure-based liquid cooling plate designed to address the heat generation characteristics of prismatic lithium-ion batteries. The size of the lithium-ion battery is 148 mm × 26 mm × 97 mm, the positive pole...

(This article belongs to the Special Issue Electrochemical and Thermal Modeling of Batteries for Electric Vehicle)
  • Article
  • Open Access
67 Citations
9,981 Views
18 Pages

Effect of the t8/5 Cooling Time on the Properties of S960MC Steel in the HAZ of Welded Joints Evaluated by Thermal Physical Simulation

  • Miloš Mičian,
  • Daniel Harmaniak,
  • František Nový,
  • Jerzy Winczek and ,
  • Jaromír Moravec and
  • Libor Trško
  • + 1 author+ 0 author

7 February 2020

The heat input into the material during welding significantly affects the properties of high-strength steels in the near-weld zone. A zone of hardness decrease forms, which is called the soft zone. The width of the soft zone also depends on the cooli...

(This article belongs to the Special Issue High-Strength Low-Alloy Steels)
  • Article
  • Open Access
611 Views
33 Pages

Spatial Context-Driven Thermal Erosion and Urban Forest Cooling Gradients: A Multi-Scenario Simulation of Ecological Networks

  • Rong Xia,
  • Yuechu Shi,
  • Haiyan Xia,
  • Hao Yuan and ,
  • Haolin Zhao and
  • Paolo Vincenzo Genovese
  • + 1 author+ 0 author

30 April 2026

Urban forest fragmentation can weaken ecological connectivity and reduce the spatial continuity of cooling benefits, highlighting the need for structure-function integrated planning. Using 2020 as the baseline year, this study combined the Markov Cha...

(This article belongs to the Special Issue Ecological Functions of Urban Green Spaces)
  • Article
  • Open Access
26 Citations
10,721 Views
14 Pages

1 September 2020

Here, we report a successfully modified Czochralski process system by introducing the cooling system and subsequent examination of the results using crystal growth simulation analysis. Two types of cooling system models have been designed, i.e., long...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
13 Citations
5,206 Views
19 Pages

28 February 2020

To analyze the internal flow of the engine cooling water pump (ECWP) under thermodynamic effect, Zwart cavitation model based on the Rayleigh-Plesset equation is corrected, and NACA0015 hydrofoil was selected to verify the corrected model. The cavita...

(This article belongs to the Collection Modeling, Simulation and Computation on Dynamics of Complex Fluids)
  • Review
  • Open Access
13 Citations
4,988 Views
19 Pages

Test-Rig Simulation on Hybrid Thermal Barrier Coating Assisted with Cooling Air System for Advanced Gas Turbine under Prolonged Exposures—A Review

  • Salmi Mohd Yunus,
  • Savisha Mahalingam,
  • Abreeza Manap,
  • Nurfanizan Mohd Afandi and
  • Meenaloshini Satgunam

Thermal barrier coating (TBC) and cooling air systems are among the technologies that have been introduced and applied in pursuing the extensive development of advanced gas turbine. TBC is used to protect the gas turbine components from the higher op...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Feature Paper
  • Article
  • Open Access
16 Citations
4,002 Views
17 Pages

Effect of the Cooling Rate of Thermal Simulation on the Microstructure and Mechanical Properties of Low-Carbon Bainite Steel by Laser-Arc Hybrid Welding

  • Jintao Chen,
  • Zhenlin Zhang,
  • Zhiyi Zhang,
  • Yingzong Liu and ,
  • Xu Zhao,
  • Jingqing Chen and
  • Hui Chen
  • + 2 authors+ 0 author

24 July 2022

A new kind of low-carbon bainite steel with excellent strength and toughness was developed, serving as the bogie of the next-generation high-speed train. However, the softening of the heat-affected zone (HAZ) in laser-arc hybrid welding (LAHW) needs...

(This article belongs to the Section High-Energy Beam Surface Engineering and Coatings)

of 102