Skip to Content
You are currently on the new version of our website. Access the old version .

5,507 Results Found

  • Article
  • Open Access
6 Citations
3,671 Views
22 Pages

18 March 2022

In the present study, the hydraulic operation of flow through transverse bottom racks screens with conventional triangular wedge wire and alternative circular section wire is experimentally and numerically analyzed. A laboratory prototype is built fo...

(This article belongs to the Section Hydraulics and Hydrodynamics)
  • Article
  • Open Access
6 Citations
5,340 Views
17 Pages

In this study, an experimentally validated computational model was developed to investigate the hydrodynamics in a rotor-stator vortex agglomeration reactor RVR having a rotating disc at the centre with two shrouded outer plates. A numerical simulati...

  • Review
  • Open Access
41 Citations
7,249 Views
31 Pages

CFD Modeling of Effluent Discharges: A Review of Past Numerical Studies

  • Abdolmajid Mohammadian,
  • Hossein Kheirkhah Gildeh and
  • Ioan Nistor

18 March 2020

Effluent discharge mixing and dispersion have been studied for many decades. Studies began with experimental investigations of geometrical and concentration characteristics of the jets in the near-field zone. More robust experiments were performed us...

(This article belongs to the Section Water Resources Management, Policy and Governance)
  • Article
  • Open Access
23 Citations
7,202 Views
18 Pages

Hydraulic Design and CFD-Based Parametric Study for Optimizing Centrifugal Pump Impeller Performance

  • Abdurashid Aliuly,
  • Tangnur Amanzholov,
  • Abzal Seitov,
  • Nazerke Momysh and ,
  • Nurbolat Jaichibekov and
  • Aidarkhan Kaltayev
  • + 1 author+ 0 author

6 November 2024

Centrifugal pumps are extensively utilized across various industries, including water supply, agriculture, and energy, where they consume significant amounts of electricity. As demands for energy efficiency and reduced operating costs increase, enhan...

(This article belongs to the Section Mechanical Engineering)
  • Feature Paper
  • Article
  • Open Access
17 Citations
5,553 Views
18 Pages

Analysis of Applicability of CFD Numerical Studies Applied to Problem When Pump Working as Turbine

  • Frank Plua,
  • Victor Hidalgo,
  • P. Amparo López-Jiménez and
  • Modesto Pérez-Sánchez

3 August 2021

The present research depicts an analysis of the implementation of computational fluid dynamics (CFD) in the study of pumps such as turbines and PATs. To highlight the benefits of CFDs for PAT studies, results from both experimental tests have been co...

(This article belongs to the Special Issue Hydropower and Pumping Systems)
  • Feature Paper
  • Article
  • Open Access
18 Citations
7,502 Views
16 Pages

An alternative to experiments is the use of numerical model tests, where the performances of ships can be evaluated entirely by computer simulations. In this paper, the free surface viscous flow around a bare hull model is simulated with three Comput...

(This article belongs to the Section Ocean Engineering)
  • Review
  • Open Access
289 Views
26 Pages

Methodological Variability and Reporting Practices in Contemporary Patient-Specific Intracranial Aneurysm CFD Studies: A Review

  • Brian H. Carlson,
  • William H. Rankin,
  • Michael P. Shiaras,
  • Abhijith R. Bathini and ,
  • Anwesha Dubey,
  • Devi P. Patra and
  • Yulia T. Peet
  • + 2 authors+ 0 author

14 October 2026

Patient-specific computational fluid dynamics (CFD) is increasingly used to investigate intracranial aneurysm hemodynamics. However, differences in modeling practices can affect simulated flow fields and derived metrics, complicating interpretation a...

(This article belongs to the Special Issue Advances in Hemodynamics)
  • Article
  • Open Access
2 Citations
2,365 Views
12 Pages

CFD Model Studies of Dust Dispersion in Driven Dog Headings

  • Magdalena Tutak,
  • Jarosław Brodny,
  • Antoni John,
  • Janos Száva and ,
  • Sorin Vlase and
  • Maria Luminita Scutaru
  • + 1 author+ 0 author

14 October 2022

Dust is one of the most burdensome hazards found in the environment. It is composed of crushed solids that pose a threat to the health and life of people, machines and machine components. At high concentration levels, it can reduce visibility. All of...

(This article belongs to the Special Issue Mathematical Modeling and Simulation in Mechanics and Dynamic Systems, 2nd Edition)
  • Article
  • Open Access
2 Citations
8,185 Views
20 Pages

A three-dimensional (3D) CFD model was developed, covering a square area of 3.64 km2 and comprising the Holy Mosque near its center, the actual terrain, and the main surrounding buildings. The gust wind effects on the existing cranes and the collapse...

(This article belongs to the Section Architectural Design, Urban Science, and Real Estate)
  • Feature Paper
  • Article
  • Open Access
23 Citations
6,743 Views
19 Pages

Decomposition of Additive-Free Formic Acid Using a Pd/C Catalyst in Flow: Experimental and CFD Modelling Studies

  • Sanaa Hafeez,
  • Felipe Sanchez,
  • Sultan M. Al-Salem,
  • Alberto Villa and ,
  • George Manos,
  • Nikolaos Dimitratos and
  • Achilleas Constantinou
  • + 2 authors+ 0 author

7 March 2021

The use of hydrogen as a renewable fuel has gained increasing attention in recent years due to its abundance and efficiency. The decomposition of formic acid for hydrogen production under mild conditions of 30 °C has been investigated using a 5 wt.%...

(This article belongs to the Section Biomass Catalysis)
  • Article
  • Open Access
1 Citations
1,382 Views
25 Pages

Comparative Analysis of CFD Simulations and Empirical Studies for a Heat Exchanger in a Dishwasher

  • Wojciech Skarka,
  • Maciej Mazur,
  • Damian Kądzielawa and
  • Robert Kubica

18 December 2025

This paper presents a side-by-side study of CFD predictions and experimental measurements for a novel counter-flow heat exchanger installed in the sidewall of a dishwasher (HEBS). The work aims to improve appliance efficiency by transferring heat fro...

(This article belongs to the Special Issue Computational Fluid Dynamics (CFD) Study for Heat Transfer)
  • Article
  • Open Access
10 Citations
12,809 Views
24 Pages

CFD-Based Aeroelastic Sensitivity Study of a Low-Speed Flutter Demonstrator

  • Vladyslav Rozov,
  • Andreas Volmering,
  • Andreas Hermanutz,
  • Mirko Hornung and
  • Christian Breitsamter

The goal of developing aircraft that are greener, safer and cheaper can only be maintained through significant innovations in aircraft design. An integrated multidisciplinary design approach can lead to an increase in the performance of future deriva...

(This article belongs to the Special Issue Aeroelasticity)
  • Review
  • Open Access
114 Citations
18,229 Views
23 Pages

27 June 2008

Thermochemical conversion of biomass offers an efficient and economically process to provide gaseous, liquid and solid fuels and prepare chemicals derived from biomass. Computational fluid dynamic (CFD) modeling applications on biomass thermochemical...

(This article belongs to the Special Issue Biofuels R&D: Securing the Planet's Future Energy Needs)
  • Review
  • Open Access
22 Citations
7,538 Views
44 Pages

A Critical Review of CFD Modeling Approaches for Darrieus Turbines: Assessing Discrepancies in Power Coefficient Estimation and Wake Vortex Development

  • Saïf ed-Dîn Fertahi,
  • Tarik Belhadad,
  • Anass Kanna,
  • Abderrahim Samaouali and ,
  • Imad Kadiri and
  • Ernesto Benini
  • + 1 author+ 0 author

25 August 2023

This critical review delves into the impact of Computational Fluid Dynamics (CFD) modeling techniques, specifically 2D, 2.5D, and 3D simulations, on the performance and vortex dynamics of Darrieus turbines. The central aim is to dissect the dispariti...

(This article belongs to the Special Issue Industrial CFD and Fluid Modelling in Engineering)
  • Article
  • Open Access
16 Citations
4,988 Views
23 Pages

Particulate Matter Reduction in Residual Biomass Combustion

  • Maulana G. Nugraha,
  • Harwin Saptoadi,
  • Muslikhin Hidayat,
  • Bengt Andersson and
  • Ronnie Andersson

7 June 2021

Counteracting emissions of particulate matter (PM) is an increasingly important goal in sustainable biomass combustion. This work includes a novel approach to investigate the PM emissions, originating from residual biomass combustion, at different co...

(This article belongs to the Special Issue Residual Biomass Conversion to Bioenergy)
  • Article
  • Open Access
11 Citations
5,197 Views
31 Pages

14 February 2023

This article presents a three-dimensional CFD model and OpenCV code by comparing the flow over the spillway with the experimental data for use in spillway studies. A 1/200-scale experimental model of a real dam spillway was created according to Froud...

(This article belongs to the Special Issue Modelling and Numerical Simulation of Hydraulics and River Dynamics)
  • Article
  • Open Access
1,611 Views
35 Pages

12 January 2026

Passive building ventilation features, such as wind towers, can help meet rising cooling and ventilation demands in hot, arid regions. However, most prior studies rely on scaled models or isolate single design parameters, limiting holistic insight. T...

(This article belongs to the Section Architectural Design, Urban Science, and Real Estate)
  • Article
  • Open Access
20 Citations
4,062 Views
13 Pages

Validation and Numerical Sensitivity Study of Air Baffle Photovoltaic-Thermal Module

  • Yu-Jin Kim,
  • Kwang-Seob Lee,
  • Libing Yang,
  • Evgueniy Entchev and ,
  • Eun-Chul Kang and
  • Euy-Joon Lee
  • + 1 author+ 0 author

17 April 2020

Photovoltaic-Thermal (PVT) is a type of technology that generates electricity and heat simultaneously at the point of use. The generated electricity could be used on site or exported to the grid while the thermal output could be utilized for space an...

(This article belongs to the Special Issue Solar Thermal Energy Conversion and Storage)
  • Article
  • Open Access
73 Citations
8,848 Views
23 Pages

CFD Simulations of Floating Point Absorber Wave Energy Converter Arrays Subjected to Regular Waves

  • Brecht Devolder,
  • Vasiliki Stratigaki,
  • Peter Troch and
  • Pieter Rauwoens

13 March 2018

In this paper we use the Computational Fluid Dynamics (CFD) toolbox OpenFOAM to perform numerical simulations of multiple floating point absorber wave energy converters (WECs) arranged in a geometrical array configuration inside a numerical wave tank...

  • Article
  • Open Access
33 Citations
9,262 Views
17 Pages

8 February 2017

Carangiform fish, like mackerel, saithe and bass, swim forward by rhythmically passing body waves from the head to the tail. In this paper, the undulating motions are decomposed into the travelling part and the standing part by complex orthogonal dec...

  • Article
  • Open Access
32 Citations
6,216 Views
22 Pages

Hydrodynamic coefficient estimation is crucial to the shape design, dynamic modeling, and control of underwater vehicles. In this paper, we conduct a numerical study on the hydrodynamic coefficient estimation of an underactuated underwater vehicle (a...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
12 Citations
3,857 Views
19 Pages

Validation Process for Rooftop Wind Regime CFD Model in Complex Urban Environment Using an Experimental Measurement Campaign

  • Sarah Jamal Mattar,
  • Mohammad Reza Kavian Nezhad,
  • Michael Versteege,
  • Carlos F. Lange and
  • Brian A. Fleck

27 April 2021

This research presents a validation methodology for computational fluid dynamics (CFD) assessments of rooftop wind regime in urban environments. A case study is carried out at the Donadeo Innovation Centre for Engineering building at the University o...

  • Article
  • Open Access
11 Citations
2,537 Views
30 Pages

Numerical Investigation of Hydrogen Jet Dispersion Below and Around a Car in a Tunnel

  • Nektarios Koutsourakis,
  • Ilias C. Tolias,
  • Stella G. Giannissi and
  • Alexandros G. Venetsanos

8 September 2023

Accidental release from a hydrogen car tank in a confined space like a tunnel poses safety concerns. This Computational Fluid Dynamics (CFD) study focuses on the first seconds of such a release, which are the most critical. Hydrogen leaks through a T...

(This article belongs to the Special Issue Computational Fluid Dynamics Applied to Hydrogen Safety)
  • Article
  • Open Access
6 Citations
3,372 Views
24 Pages

Parameter Sensitivity Study on Inflow Distortion of Boundary Layer Ingested Turbofans

  • Xin Zhao,
  • Philip Van Hoorn,
  • Hua-Dong Yao and
  • James Alderman

The inflow distortion to the fan introduced by the ingestion of the fuselage boundary layer is the most critical challenge in realizing the benefits of boundary later ingesting (BLI) concepts. Minimizing the level of distortion while maintaining the...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
12 Citations
3,271 Views
18 Pages

6 January 2022

In the drilling of horizontal wells, the drill cuttings tend to settle down on the low side of the annulus due to gravity and form a stationary bed, which results in hole cleaning problems. In this paper, a novel type of drillpipe with an elliptical...

(This article belongs to the Topic Drilling, Completion and Well Engineering for the Natural Energy Resources Extraction, Storage and Sustainable Management)
  • Article
  • Open Access
15 Citations
3,632 Views
16 Pages

19 May 2022

The application of hole cleaning devices can effectively solve the hole cleaning problem during the drilling of horizontal wells. Improving the hole cleaning performance is directly related to subsequent drilling time and cost. In this paper, the sol...

(This article belongs to the Special Issue Multiphase and Granular Flows)
  • Article
  • Open Access
2 Citations
2,091 Views
15 Pages

Development of a Novel Spinneret Design for Improved Melt Extrusion Performance: A Computational and Empirical Study

  • Nereida Guadalupe Ortiz-Leyva,
  • Giuseppe Romano,
  • Jack Wilson,
  • Jonathan C. Hunter and
  • Alessandro De Rosis

30 December 2025

This study presents a comprehensive evaluation of a novel spinneret design to enhance polymer melt extrusion performance in fibre spinning production. Computational fluid dynamics (CFD) simulations using ANSYS Polyflow 2024 R2 are employed to analyse...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
4 Citations
5,517 Views
14 Pages

11 September 2019

In this paper, a new bell-type air nozzle, which overcomes the structural defects of traditional bell-type air nozzles, is proposed and validated by cold test and numerical simulation. The pressure drop characteristic of the new bell-type air nozzle...

(This article belongs to the Section Applied Industrial Technologies)
  • Review
  • Open Access
5 Citations
7,073 Views
23 Pages

Experimental and Numerical Studies on the Efficacy of Water Mist to Suppress Hydrocarbon Fires in Enclosures

  • Khalid Moinuddin,
  • H. M. Iqbal Mahmud,
  • Paul Joseph,
  • Grant Gamble and ,
  • Brigitta Suendermann,
  • Cameron Wilkinson and
  • James Bossard
  • + 2 authors+ 0 author

6 March 2024

Fire is one of the most undesirable events onboard a ship. The engine room is one of the most critical spaces in the ship in terms of fire protection, as it includes machinery, hydrocarbon fuel systems, and different electrical equipment. With the ph...

(This article belongs to the Section Fire Science Models, Remote Sensing, and Data)
  • Article
  • Open Access
6 Citations
4,328 Views
11 Pages

Comparative Study of CFD and LedaFlow Models for Riser-Induced Slug Flow

  • Rasmus Thy Jørgensen,
  • Gunvor Rossen Tonnesen,
  • Matthias Mandø and
  • Simon Pedersen

20 July 2020

The goal of this study is to compare mainstream Computational Fluid Dynamics (CFD) with the widely used 1D transient model LedaFlow in their ability to predict riser induced slug flow and to determine if it is relevant for the offshore oil and gas in...

(This article belongs to the Special Issue Engineering Fluid Dynamics 2019-2020)
  • Article
  • Open Access
3 Citations
1,970 Views
25 Pages

CFD and Experimental Comparison for Micro-Pump Performance in Space Applications: A Case Study

  • Oana Dumitrescu,
  • Cristian Dobromirescu,
  • Valeriu Dragan,
  • Ionut Sebastian Vintila and
  • Radu Mihalache

12 June 2025

This paper presents a case study comparing CFD predictions with experimental measurements for micropumps, with the goal of evaluating the accuracy and limitations of CFD methods in complex microscale geometries. A fast design and evaluation methodolo...

  • Article
  • Open Access
9 Citations
6,130 Views
24 Pages

A Comparative Study of Different CFD Codes for Fluidized Beds

  • Parindra Kusriantoko,
  • Per Fredrik Daun and
  • Kristian Etienne Einarsrud

16 June 2024

Fluidized beds are pivotal in the process industry and chemical engineering, with Computational Fluid Dynamics (CFD) playing a crucial role in their design and optimization. Challenges in CFD modeling stem from the scarcity or inconsistency of experi...

(This article belongs to the Topic Nonlinear Phenomena, Chaos, Control and Applications to Engineering and Science and Experimental Aspects of Complex Systems)
  • Article
  • Open Access
2 Citations
3,910 Views
12 Pages

Heat-Induced Increase in LPG Pressure: Experimental and CFD Prediction Study

  • Thiago Fernandes Barbosa,
  • Domingos Xavier Viegas,
  • MohammadReza Modarres and
  • Miguel Almeida

27 June 2023

Computational fluid dynamics (CFD) has become a widely used tool for predicting hazardous scenarios. The present study aimed to assess CFD prediction applied to LPG containers under heating. Thus, two cylinders, each filled with propane or butane, we...

  • Article
  • Open Access
2 Citations
2,477 Views
24 Pages

CFD Numerical Simulation Study Based on Plunger Air Lift

  • Qi Xia,
  • Guowei Wang,
  • Hongshan Mei,
  • Minwei Qiu and ,
  • Yuqiang Tang,
  • Shimao Zhang,
  • Hao Zhou,
  • Ruiquan Liao and
  • Manlai Zhang
  • + 4 authors+ 0 author

29 October 2023

To study the movement law of a plunger air lift and liquid discharge efficiency, this paper observes the plunger movement and leakage through indoor experiments, based on which the CFD method is applied to establish a numerical model with the same ex...

(This article belongs to the Topic Multi-Phase Flow and Unconventional Oil/Gas Development)
  • Article
  • Open Access
15 Citations
11,252 Views
27 Pages

CFD Study on Hydrodynamic Performances of a Planing Hull

  • Florin Pacuraru,
  • Andreea Mandru and
  • Adham Bekhit

18 October 2022

The scope of the present study is to investigate the effects of various geometrical hull features, such as tunnels, spray rails and whiskers on the hydrodynamic performance of a high-speed planing hull. The criteria being tested to emphasize the boat...

(This article belongs to the Special Issue Verification and Validation Analysis on Marine Applications)
  • Article
  • Open Access
23 Citations
6,489 Views
26 Pages

19 September 2022

The deterioration of the urban environment is a problem which has captured the attention of governmental departments and researchers, who are committed to improving the urban environment from the perspective of optimizing urban morphology. Although m...

(This article belongs to the Topic Bioclimatic Designs to Enhance Urban/Rural Resilience)
  • Article
  • Open Access
194 Views
18 Pages

6 October 2026

The CFD study investigated three different groove geometries: circular, rectangular, and trapezoidal grooves, and these results were compared to a smooth tube. The results obtained from this CFD study were compared with experimental work completed fo...

(This article belongs to the Special Issue Pipe Flow: Research and Applications, 3rd Edition)
  • Article
  • Open Access
36 Citations
16,106 Views
12 Pages

25 October 2008

Urban heat islands are one of the most critical urban environment heat problems. Landsat ETM+ satellite data were used to investigate the land surface temperature and underlying surface indices such as NDVI and NDBI. A comparative study of the urban...

(This article belongs to the Special Issue Sensors for Urban Environmental Monitoring)
  • Feature Paper
  • Article
  • Open Access
13 Citations
3,786 Views
12 Pages

CFD Study of the Numbering up of Membrane Microreactors for CO2 Capture

  • Eleana Harkou,
  • Sanaa Hafeez,
  • George Manos and
  • Achilleas Constantinou

26 August 2021

Carbon dioxide (CO2) is one of the major atmospheric greenhouse gases (GHG). The continuous increase of CO2 concentration and its long atmospheric lifetime may cause long-term negative effects on the climate. It is important to develop technologies t...

(This article belongs to the Special Issue Gas Emissions Control and Utilization)
  • Article
  • Open Access
627 Views
45 Pages

Influence of Geometric Parameters on Hybrid Darrieus–Savonius Hydrokinetic Turbine Performance: A CFD and Experimental Study

  • Andrés Felipe Rodriguez-Valencia,
  • Emerson Escobar-Nunez and
  • Guillermo Andrés Jaramillo-Pizarro

25 August 2026

Reliable electricity supply in Colombia’s Non-Interconnected Zones requires sustainable and low-cost energy technologies. Vertical-axis hydrokinetic turbines are promising for this purpose; however, their relatively low power coefficient remain...

(This article belongs to the Special Issue CFD Applications in Renewable Energy Systems (2nd Edition))
  • Article
  • Open Access
9 Citations
3,926 Views
14 Pages

CFD Study of the Effect of the Angle Pattern on Iliac Vein Compression Syndrome

  • Hsuan-Wei Chen,
  • Chao-Hsiang Chen,
  • Yu-Jui Fan,
  • Chun-Yu Lin and ,
  • Wen-Hsien Hsu,
  • I-Chang Su,
  • Chun-Li Lin,
  • Yuan-Ching Chiang and
  • Haw-Ming Huang
  • + 4 authors+ 0 author

Iliac vein compression syndrome (IVCS, or May–Thurner syndrome) occurs due to the compression of the left common iliac vein between the lumbar spine and right common iliac artery. Because most patients with compression are asymptomatic, the syn...

(This article belongs to the Section Biomedical Engineering and Biomaterials)
  • Article
  • Open Access
2 Citations
2,949 Views
23 Pages

Bidirectionally Coupled FE-CFD Simulation Study on MQL Machining Process of Ti-6Al-4V Alloy

  • Xiaorong Zhou,
  • Lin He,
  • Sen Yuan,
  • Hongwan Jiang and ,
  • Jing Deng,
  • Feilong Du,
  • Jingdou Yang and
  • Zebin Su
  • + 3 authors+ 0 author

In the context of sustainable manufacturing practices, minimum quantity lubrication (MQL) has been extensively employed in machining operations involving hard-to-cut materials. While substantial experimental and numerical investigations on MQL-assist...

  • Article
  • Open Access
3 Citations
4,111 Views
17 Pages

Challenges in CFD Model Validation: A Case Study Approach Using ANSYS CFX and TurboGrid

  • Jordan Dickenson,
  • James M. Buick,
  • Jovana Radulovic and
  • James Bull

Model validation is an essential part of CFD-based projects. Despite being successfully employed for decades, the level and extent of CFD model validation details vary significantly in the published literature, which, in turn, adversely affects the r...

(This article belongs to the Section Turbomachinery)
  • Article
  • Open Access
446 Views
18 Pages

17 August 2026

Due to advantages such as larger heat transfer area, higher heat transfer efficiency, and greater thermal expansion stress, helical coiled tubes (HCTs) have been widely adopted in heat exchangers in industry, especially for nuclear power plants. The...

  • Article
  • Open Access
4 Citations
1,822 Views
20 Pages

25 February 2025

Urumqi is located at the northern foot of the Tianshan Mountains. Its topographical features have a significant impact on the transport and dispersion of air pollutants. Moreover, its winter is extremely long, lasting up to six months. A combination...

  • Article
  • Open Access
24 Citations
28,975 Views
26 Pages

29 September 2015

The present study aimed at assessing a novel annular-ducted fan lift system for VTOL aircraft through computational fluid dynamics (CFD) simulations. The power and lift efficiency of the lift fan system in hover mode, the lift and drag in transition...

(This article belongs to the Special Issue Feature Papers in Aerospace)
  • Article
  • Open Access
12 Citations
5,043 Views
17 Pages

28 April 2023

The purpose of this paper is to investigate the fire performance in a multi-storey cross-laminated timber (CLT) structure by the computational fluid dynamics (CFD) technique using the Fire Dynamics Simulator (FDS v.6.7). The study investigates fire t...

(This article belongs to the Section Mathematical and Computational Fluid Mechanics)
  • Article
  • Open Access
1 Citations
894 Views
23 Pages

Suppression Effects and Mechanisms of Fine Water Mist on Methane Explosions in Large-Scale Roadways via Experimental and CFD Studies

  • Pikai Zhu,
  • Zheng Yan,
  • Quansheng Jia,
  • Jingqing Zhao and ,
  • Zichao Huang,
  • Zhengkang Lu and
  • Jing Luo
  • + 2 authors+ 0 author

27 May 2026

This study investigated the suppression effects and mechanisms of fine water mist on methane/air explosions through large-scale roadway experiments and numerical simulations. Experiments showed that fine water mist curtains deployed at 40 m and 70 m...

(This article belongs to the Special Issue Fire and Explosion Safety with Risk Assessment and Early Warning)
  • Article
  • Open Access
5 Citations
11,823 Views
19 Pages

CFD and Experimental Study on the Effect of Progressive Heating on Fluid Flow inside a Thermal Wind Tunnel

  • Hassam Nasarullah Chaudhry,
  • John Kaiser Calautit,
  • Ben Richard Hughes and
  • Lik Fang Sim

21 October 2015

A detailed Computational Fluid Dynamics (CFD) and experimental investigation into characterizing the fluid flow and thermal profiles in a wind tunnel was carried out, highlighting the effect of progressive heating on the non-uniformity flow profile o...

(This article belongs to the Special Issue Computational Fluid Dynamics in Civil Engineering)
  • Article
  • Open Access
5 Citations
4,468 Views
14 Pages

3 March 2025

Submarines are primarily designed for optimal performance while operating submerged, as they spend the majority of their operational time below the free surface. However, they also navigate at various depths near the free surface, such as during snor...

of 111