A disposable voltammetric immunosensor was developed to measure breast cancer biomarker 15-3 (CA 15-3) in human saliva and serum samples. Screen-printed paper-based electrodes (f-SPE) previously fabricated by our research group using homemade conduct...
Thymol and carvacrol—the components of herbal spices—are known for their broad biological activity as antimicrobials and antioxidants. For this reason, it is important to develop new methods for their determination in plant material. A simple, rapid,...
A voltammetric study of the oxidation of loperamide has been carried out at the glassy carbon electrode. This compound exhibited a single peak in Britton-Robinson buffer solutions of pH 5.0–11.0, with a maximum current at pH 8.0. The electrochemical...
A simple, fast, sensitive and low-cost voltammetric method using a screen-printed carbon electrode (SPCE) is presented in this work for the simultaneous determination of ascorbic acid (AA), paracetamol (PA), dextromethorphan (DX) and caffeine (CF) in...
The aim of this paper was to investigate the effect of temperature on the removal efficiency of surfactant-induced interferences. Surfactants were removed as a result of mixing with XAD-7 resin. The study was carried out using the example of Cr(VI) d...
Cyclic voltammetry (CV) can be applied as a reliable method for the determination of chloride ions in a range from several to a couple hundred (about 200) ppm. Since the standard potential of chloride ion/gaseous chlorine is 1.36 V vs. normal hydroge...
In this work, a microfabricated Au-film sensor was designed and fabricated for the
voltammmetric determination of Hg(II). The electrode was fabricated on a silicon chip with a
standard microengineering approach utilizing photolithography for patterning...
In this work, a new sensitive voltammetric method for the determination of rifampicin without time-consuming preconcentration is presented. The objective was to develop a simple, fast and sensitive voltammetric procedure for the analysis of rifampici...
This article presents advances in the electrochemical determination of hormones and steroids since 2000. A wide spectrum of techniques and working electrodes have been involved in the reported measurements in order to obtain the lowest possible limit...
This paper summarises the results of voltammetric studies on the herbicide 3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea (Linuron), using a carbon paste electrode containing tricresyl phosphate (TCP-CPE) as liquid binder. The principal experimental c...
In the present work, we describe the electrochemical behaviour of two opioids structurally related to aroyl amides of forensic interest, namely U-47700 and AH-7921. The data obtained allowed for the mise-au-point of a voltammetric determination proto...
The electrochemical properties of methylisothiazolinone (MIT), the most widely used preservative, were investigated by cyclic (CV) and differential pulse voltammetry (DPV) to develop a new method for its determination. To our knowledge, this is the f...
The electrochemical oxidation of levamisole, a glassy carbon electrode, was investigated over the pH range 2.0–10.0. Cyclic voltammetric investigations showed a single oxidation process was recorded, with a peak potential (Ep) shown to be pH-de...
Highly stable, small-sized and evenly distributed solid mercury nanoparticles capped with ibuprofen (Ibu-HgNPs) were prepared via reduction with hydrazine and capped with ibuprofen as a stabilizing agent. Characterization of Ibu-HgNPs was carried out...
Synthetic dyes of various classes are widely applied in food production. Reliable and simple methods of dye determination are in demand for food quality control. Novel, sensitive, and selective voltammetric sensors based on glassy carbon electrodes m...
Estrogens in aquatic environments pose significant ecological and health risks due to their cumulative effects rather than individual impacts. This study investigates the voltammetric behavior of estrone (E1), 17β-estradiol (E2), estriol (E3), a...
The current work introduced a convenient single-phase hydrothermal protocol to fabricate MnO2 nanorods (MnO2 NRs). Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDX) and field-emission...
Electrochemical sensors with polymeric films as a sensitive layer are of high interest in current electroanalysis. A voltammetric sensor based on multi-walled carbon nanotubes (MWCNTs) and electropolymerized 4-aminobenzoic acid (4-ABA) has been devel...
A voltammetric method based on the use of screen-printed carbon electrodes (SPCEs) is presented for the simultaneous determination of salbutamol (SAL), sulfamethoxazole (SMX), and trimethoprim (TMP), with high sensitivity, fast response, and excellen...
The present paper reports a new application: the voltammetric determination in herbal medicines of ultra-trace thallium(I), in the presence of lead(II), tin(II) and antimony(III) as interfering metals, by square wave anodic stripping voltammetry (SWA...
A novel voltammetric sensor based on a self-assembled composite formed by native DNA and electropolymerized N-phenyl-3-(phenylimino)-3H-phenothiazin-7-amine has been developed and applied for sensitive determination of doxorubicin, an anthracycline d...
The voltammetric behaviour of Rhodamine B was studied at a screen-printed carbon electrode (SPCE), by cyclic and differential pulse voltammetry. Cyclic voltammograms exhibited two reduction peaks (designated R1 and R2) generated from the reduction of...
A novel electrochemical method for the determination of quinoline yellow (QY) was developed using the renewable amalgam film electrode (Hg(Ag)FE). The sensors used can be characterized by good stability and long lifespan. Irreversible QY reduction pe...
The article reports for the first time the application of a solid silver microelectrode array for the anodic stripping voltammetric determination of thallium(I) ions (Tl(I)). The microelectrode properties of the presented sensor were tested. The prop...
This work reports the development and application of a simple, rapid and low-cost voltammetric method for the determination of 3-methylmorphine at nanomolar levels in clinical and environmental samples. The proposed method involves the combined appli...
A simple procedure for field fish sample pretreatment was developed. This treatment in combination with square wave anodic stripping voltammetry (SW-ASV) with solid gold electrodes (SGE) and gold nanoparticle-modified glassy carbon electrodes (AuNPs-...
The voltammetric behavior of prochlorperazine and ethopropazine at a decanethiol (DEC) self-assembled monolayer (SAM) modified gold electrode (DEC/Au) has been studied. It was observed that prochlorperazine exhibited an anodic peak at about 0.60 V (v...
Copper nanowires (Cu NWs) were modified with graphene oxide (GO) nanosheets to obtain a sensor for simultaneous voltammetric determination of ascorbic acid (AA), dopamine (DA) and acetaminophen (AC). The nanocomposite was obtained via sonication, and...
In the present work, we designed a straightforward and disposable voltammetric sensor utilizing a molybdenum disulfide/multi-walled carbon nanotube nanostructure-modified screen-printed carbon electrode (MoS2/MWCNTs/SPCE) for 4-nitrophenol (4-NP) det...
This paper proposes a simple, environmentally friendly, and efficient procedure for preparing natural water samples for the voltammetric determination of trace amounts of Se(IV). The method is based on premixing a sample with Amberlite XAD-7 resin at...
We have developed a simple, convenient and inexpensive voltammetric method for determining trace Sudan I contamination in chili powder, based on the catalyzed electrochemical reduction of Sudan I at the carbon nanotube modified electrode. Under optim...
This article presents a new working electrode based on a bismuth-plated, gold-based microelectrode array, which is suitable for determining thallium(I) species using anodic stripping voltammetry (ASV). It allowed a significant increase in the sensiti...
Aceclofenac (ACL) is an anti-inflammatory drug, which is taken by patients who mainly suffer from rheumatoid conditions. In this work, we propose a new voltammetric method that allows the determination of ACL in pharmaceutics, urine, and plasma. As a...
A novel voltammetric sensor based on CeO2·Fe2O3 nanoparticles (NPs) has been developed for the determination of lipoic acid, playing an essential role in aerobic metabolism in the living organism. Sensor surface modification provides a 5.6-fold incre...
Diclofenac (DCF) is a nonsteroidal anti-inflammatory drug to treat pain and inflammatory diseases. The high consumption of the drug leads to a significant change in the ecosystem. With the aim of optimizing a fast screening analysis for DCF detection...
The design of an indicator electrode made of carbon paste of ergonomic design for the voltammetric determination of a number of substances of inorganic and organic origin is described. The electrode is made of a graphite rod with a diameter of 6 mm a...
In this work, a voltammetric method based on a metal organic framework (Ca-MOF)-modified carbon paste electrode for lead determination was developed. The MOF-based electrode was packed in a new type of 3D-printed syringe-type integrated device, which...
This manuscript reports the use of nanoparticle-modified voltammetric sensors for the rapid and green determination of chemical oxygen demand in river waters and waters from agricultural waste. Four different variants of modified electrodes have been...
In this work, a 3D printed sensor modified with a water-stable complex of Fe(III) basic benzoate is presented for the voltammetric detection of glucose (GLU) in acidic epidermal skin conditions. The GLU sensor was produced by the drop-casting of Fe(I...
Magnetic nanoparticles (MNPs) of iron oxide are becoming increasingly popular due to their excellent physicochemical properties as well as very good adsorption and catalytic properties towards heavy metal ions (HMIs). They are used in many industries...
A new voltammetric DNA sensor has been developed for doxorubicin determination on the platform of a glassy carbon electrode (GCE) covered with electropolymerized Azure B film and physically adsorbed native DNA. The redox properties of polymeric Azure...
This work proposes a simple, fast and low-cost voltammetric method for the determination of trimethoprim at low concentrations in an analytical and real matrix (river water sample, bovine serum and synthetic urine). For this, a glassy carbon electrod...
A versatile voltammetric procedure for quantitative determination of Pb(II) directly in environmental water samples has been proposed. Differential pulse technique in the variant of anodic stripping voltammetry was applied to study Pb(II) at a solid...
In this work, a ferrocene-containing gallic acid-derivative modified carbon-nanotube paste electrode (Gal-Fc-CNT), obtained through simple mechanical mixing, was studied for the fast simultaneous voltammetric determination of doxorubicin (DOX), capec...
Chemical Oxygen Demand (COD) is a widely used parameter in analyzing and controlling the degree of pollution in water. COD is defined as the amount of molecular oxygen (in milligrams of O2) required to decompose all the organic compounds in 1 L of aq...
Vitamin B9 or folic acid is an important food supplement with wide clinical applications. Due to its importance and its side effects in pregnant women, fast determination of this vitamin is very important. In this study we present a new fast and sens...
Tannins are a class of natural phenolic antioxidants represented by oligomers and polymers. Tannic acid (gallotannin) (TA) is one of the most typical compounds widely distributed in plants. It has a wide application area in food technology and as a p...
This work reports the fabrication of a new environmentally friendly three-electrode electrochemical sensor suitable for on-site voltammetric determination of two toxic emerging ‘technology-critical elements’ (TCEs), namely indium and thallium. The se...
In the current work, the MWCNTs/ZnO nanocomposite was successfully synthesized using simple method. Then, FE-SEM, XRD, and EDX techniques were applied for morphological and structural characterization. Afterward, a sensitive voltammetric sensor based...
The objective of the study was to develop a new method for the determination of the total content of vitamin C and dehydroascorbic acid in food, based on the technique of differential pulse voltammetry with the use of a boron-doped diamond electrode...
of 8