Skip to Content

92 Results Found

  • Article
  • Open Access
10 Citations
3,318 Views
15 Pages

30 May 2024

In this study, a top-down approach was employed for the fabrication of flame-retardant wood aerogels. The process involved the removal of lignin and the removal of hemicellulose utilizing NaOH concomitantly with the incorporation of ZnO and urea. Sub...

  • Article
  • Open Access
3 Citations
4,312 Views
19 Pages

Fire Spread Characteristics of Metal-Polyethylene Sandwich Panels

  • Ru Zhou,
  • Zhihao Chen,
  • Yinke Fan,
  • Zhengjiang Yu and ,
  • Jianan Qian and
  • Juncheng Jiang
  • + 1 author+ 0 author

5 September 2021

An experimental study was conducted to determine the characteristics of the flame spread and droplets of metal-polyethylene (PE) sandwich panels during combustion. The mass-loss rate, average flame height, temperature, and fire spread rate were inves...

(This article belongs to the Special Issue Advancement of Technologies in Tall Buildings: Evolution and Emerging Developments)
  • Article
  • Open Access
14 Citations
4,817 Views
18 Pages

Numerical Simulation of Hot Jet Detonation with Different Ignition Positions

  • Hongtao Zheng,
  • Shizheng Liu,
  • Ningbo Zhao,
  • Xiang Chen and ,
  • Xiongbin Jia and
  • Zhiming Li
  • + 1 author+ 0 author

29 October 2019

Ignition position is an important factor affecting flame propagation and deflagration-to-detonation transition (DDT). In this study, 2D reactive Navier–Stokes numerical studies have been performed to investigate the effects of ignition position...

(This article belongs to the Special Issue Progress in Combustion Diagnostics, Science and Technology)
  • Article
  • Open Access
5 Citations
1,679 Views
14 Pages

Influence of Side Duct Position and Venting Position on the Explosion and Combustion Characteristics of Premixed Methane/Air

  • Junping Cheng,
  • Yongmei Hao,
  • Zhixiang Xing,
  • Rui Song and ,
  • Fan Wu and
  • Sunqi Zhuang
  • + 1 author+ 0 author

8 March 2024

In order to explore the influence of the side duct position and venting position on the premixed combustion and explosion characteristics of methane/air, a premixed combustion and explosion experiment of methane/air and a simulation of an explosion o...

(This article belongs to the Section Chemical Processes and Systems)
  • Article
  • Open Access
3 Citations
1,706 Views
12 Pages

Experimental Study on Combustion Characteristics of Methane Vertical Jet Flame

  • Yudan Peng,
  • Jing Yu,
  • Weifeng Chen,
  • Chen Hao and ,
  • Jiawei Zhang,
  • Guangming Fu and
  • Baojiang Sun
  • + 2 authors+ 0 author

16 April 2025

A jet flame is a common type of flame in fires in the oil and gas industries. At present, research on jet flames is still not comprehensive enough. To systematically investigate the combustion characteristics of vertical methane jet flames, experimen...

(This article belongs to the Special Issue Advanced Research on Marine and Deep Oil & Gas Development)
  • Article
  • Open Access
12 Citations
4,004 Views
11 Pages

Effect of Expandable Graphite Flakes on the Flame Resistance of Oak Wood

  • Elena Kmeťová,
  • František Kačík,
  • Ivan Kubovský and
  • Danica Kačíková

6 December 2022

One of the strategies to improve the fire resistance of wood is to use flame retardants. It would be best to find an ecological, nonhalogenated flame retardant to improve the fire protection properties. In this work, oak wood (Quercus robur L.) sampl...

  • Article
  • Open Access
1 Citations
1,729 Views
15 Pages

7 January 2026

Existing experimental findings often prove insufficient for guiding the design of water mist fire extinguishing systems, primarily due to the multitude of interacting factors that influence extinguishing performance. This paper systematically synthes...

(This article belongs to the Special Issue Numerical Modeling and Simulation of Multiphase Flows in Industrial and Environmental Applications)
  • Article
  • Open Access
11 Citations
5,291 Views
16 Pages

Characteristics of Early Flame Development in a Direct-Injection Spark-Ignition CNG Engine Fitted with a Variable Swirl Control Valve

  • Abd Rashid Abd Aziz,
  • Yohannes Tamirat Anbese,
  • Ftwi Yohaness Hagos,
  • Morgan R. Heikal and
  • Firmansyah

10 July 2017

An experimental study was conducted to investigate the effect of the structure of the induction flow on the characteristics of early flames in a lean-stratified and lean-homogeneous charge combustion of compressed natural gas (CNG) fuel in a direct i...

(This article belongs to the Section I: Energy Fundamentals and Conversion)
  • Article
  • Open Access
31 Citations
6,795 Views
16 Pages

Enhancements on Flame Resistance by Inorganic Silicate-Based Intumescent Coating Materials

  • Sin-Nan Chen,
  • Pei-Kai Li,
  • Tar-Hwa Hsieh,
  • Ko-Shan Ho and
  • Yu-Meng Hong

3 November 2021

Flame-retardant coatings have drawn much attention in recent years. In this study, an inorganic sodium silicate-based intumescent flame-resistance coating with an excellent flameproof properties is developed by mainly utilizing sodium silicate as the...

(This article belongs to the Special Issue Geopolymers and Alkali-Activated Materials: Synthesis, Characterization, and Applications)
  • Article
  • Open Access
10 Citations
4,218 Views
18 Pages

Synthesis of Amorphous Carbon Film in Ethanol Inverse Diffusion Flames

  • Jie Zhu,
  • Fang Li,
  • Guannan Liu,
  • Dong Liu and ,
  • Qiongyu Li and
  • Erjun Kan
  • + 1 author+ 0 author

24 August 2018

Recently, carbon nanomaterials have attracted significant attention due to their remarkable physical and chemical properties. The preparation methods and applications of the carbon nanomaterials have developed rapidly. In this study, the flame synthe...

  • Article
  • Open Access
6 Citations
2,422 Views
12 Pages

14 October 2024

A new type of laminated flooring decorated by resin impregnated paper (LWFWRIP) was designed, with the advantages of low formaldehyde emission, improved flame retardant, and high wear resistance. The structure of this new type of wood flooring is bas...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
9 Citations
4,702 Views
14 Pages

23 November 2023

Crack propagation in ceramics is a highly quick, complex, and nonlinear process that occurs under thermal shock. It is challenging to directly observe the evolution process of cracks in experiments due to the high speed and unpredictability of crack...

  • Article
  • Open Access
1,207 Views
23 Pages

10 October 2025

To address the challenges of short dwell time near top dead center (TDC) and uneven heat release, this paper presents a comprehensive analysis of the effects of different ignition schemes on combustion characteristics, flame formation and development...

(This article belongs to the Section Applied Thermal Engineering)
  • Article
  • Open Access
2,335 Views
17 Pages

Effects of the Position and Size of the Air Injection Holes in the Flow Structure of a Trapped-Vortex Combustor

  • Luis Alfonso Moreno Pacheco,
  • Juan Gabriel Barbosa Saldaña,
  • Edgar Geovany López Jarquín,
  • José Martínez Trinidad and ,
  • Ricardo Andrés García-León and
  • Miguel Toledo Velázquez
  • + 1 author+ 0 author

Combustion efficiency and flame stabilization are two main parameters in combustor design according to current environmental policies imposed on the commercial aviation industry. An alternative for flame stabilization and high efficiency in the combu...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
38 Citations
3,920 Views
14 Pages

Use of Hydrogen–Rich Gas in Blast Furnace Ironmaking of V–bearing Titanomagnetite: Mass and Energy Balance Calculations

  • Xudong Gao,
  • Run Zhang,
  • Zhixiong You,
  • Wenzhou Yu and ,
  • Jie Dang and
  • Chenguang Bai
  • + 1 author+ 0 author

1 September 2022

The iron and steel industry is a major CO2 emitter and an important subject for the implementation of carbon emission reduction goals and tasks. Due to the complex ore composition and low iron grade, vanadium–bearing titanomagnetite smelting in...

(This article belongs to the Special Issue Frontier of Environmental Friendly Recycling Technology for Metals)
  • Article
  • Open Access
11 Citations
3,719 Views
14 Pages

Mitigating Thermal NOx by Changing the Secondary Air Injection Channel: A Case Study in the Cement Industry

  • Domenico Lahaye,
  • Mohamed el Abbassi,
  • Kees Vuik,
  • Marco Talice and
  • Franjo Juretić

25 November 2020

This work studies how non-premixed turbulent combustion in a rotary kiln depends on the geometry of the secondary air inlet channel. We target a kiln in which temperatures can reach values above 1800 degrees Kelvin. Monitoring and possible mitigation...

(This article belongs to the Special Issue Selected Papers from the 15th OpenFOAM Workshop)
  • Article
  • Open Access
11 Citations
3,556 Views
12 Pages

Photocatalytic Activity of Multicompound TiO2/SiO2 Nanoparticles

  • Filipp Temerov,
  • Janne Haapanen,
  • Jyrki M. Mäkelä and
  • Jarkko J. Saarinen

Multicompound TiO2/SiO2 nanoparticles with a diameter of 50–70 nm were generated using a liquid flame spray (LFS) nanoparticle deposition in a single flame. Here, we study the photocatalytic activity of deposited multicompound nanoparticles in gas-ph...

(This article belongs to the Section Inorganic Solid-State Chemistry)
  • Article
  • Open Access
21 Citations
10,912 Views
22 Pages

Laser-Plasma Acceleration with FLAME and ILIL Ultraintense Lasers

  • Leonida Antonio Gizzi,
  • Carlo Benedetti,
  • Carlo Alberto Cecchetti,
  • Giampiero Di Pirro and ,
  • Andrea Gamucci,
  • Giancarlo Gatti,
  • Antonio Giulietti,
  • Danilo Giulietti,
  • Petra Koester and
  • Francesco Piastra
  • + 8 authors+ 3 authors

5 July 2013

We report on the development of radiation and electron sources based on laser-plasma acceleration for biomedical and nuclear applications, using both the table top TW laser at ILIL and the 220 TW FLAME laser system at LNF. We use the ILIL laser to pr...

(This article belongs to the Special Issue Ultraintense Ultrashort Pulse Lasers)
  • Article
  • Open Access
22 Citations
5,959 Views
15 Pages

Characteristics of ZrC Barrier Coating on SiC-Coated Carbon/Carbon Composite Developed by Thermal Spray Process

  • Bo Ram Kang,
  • Ho Seok Kim,
  • Phil Yong Oh,
  • Jung Min Lee and ,
  • Hyung Ik Lee and
  • Seong Min Hong
  • + 1 author+ 0 author

5 March 2019

A thick ZrC layer was successfully coated on top of a SiC buffer layer on carbon/carbon (C/C) composites by vacuum plasma spray (VPS) technology to improve the ablation resistance of the C/C composites. An optimal ZrC coating condition was determined...

(This article belongs to the Special Issue Advances in Thermal Spray Technology)
  • Article
  • Open Access
9 Citations
6,919 Views
21 Pages

24 July 2022

Combustible decks are identified as vulnerable components of buildings in wildfire-prone areas. In California, combustible deck boards can comply with the requirements of Chapter 7A of the California Building Code if they pass an under-deck flame-imp...

(This article belongs to the Section Fire Risk Assessment and Safety Management in Buildings and Urban Spaces)
  • Article
  • Open Access
7 Citations
3,220 Views
16 Pages

Research on the Jet Characteristics and Dephosphorization Efficiency of Converter Oxygen Lance Blowing CO2-O2 Mixed Gas

  • Guoli Wei,
  • Changli Zhou,
  • Shaoyan Hu,
  • Jun Tian and ,
  • Rong Zhu,
  • Deyong Wang and
  • Qingde Zhu
  • + 2 authors+ 0 author

30 August 2022

Utilization of CO2 in steelmaking process has attracted extensive attention in recent years, not only because of its social benefits, but also its better metallurgical performance. Mixing CO2 with O2 blown by converter oxygen lance is gradually being...

(This article belongs to the Special Issue Clean Ironmaking and Steelmaking Processes)
  • Article
  • Open Access
3 Citations
5,124 Views
12 Pages

Controlling Metal Fires through Cellulose Flake Blanketing Followed by Water Spray Cooling

  • Josef Hagauer,
  • Ulrich Matlschweiger,
  • Christian Tippelreither,
  • Markus Lutz and ,
  • Thomas Hribernig and
  • Maximilian Lackner
  • + 1 author+ 0 author

17 June 2022

The traditional methods of fighting metal fires are not always safe for firefighters. The sand and salts that are thrown onto the fire to suffocate the flames can lead to splashes of molten metal, putting the firefighters and the surroundings at risk...

  • Article
  • Open Access
11 Citations
2,591 Views
14 Pages

Study on Wear and Corrosion Resistance of Ni60/WC Coating by Laser Cladding on Reciprocating Pump Plunger: Comparison with Flame-Sprayed Plungers

  • Xiaogang Wang,
  • Jingjing Qi,
  • Hao Zhang,
  • Ning Zhao and ,
  • Zhangbin Shao and
  • Shuyao Wang
  • + 1 author+ 0 author

24 October 2024

Reciprocating pumps are widely used in the current oil extraction process, and the plunger is a vulnerable part of these pumps that directly determines the service life of the reciprocating pump. To improve the service life of plungers, Ni60/WC coati...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
1,195 Views
20 Pages

12 June 2026

To improve the efficiency of jet-based fire suppression for high-rise building façade fires, this study experimentally investigates the liquid film formation characteristics and fire suppression behavior of water jets impinging on insulated ve...

  • Article
  • Open Access
1 Citations
1,556 Views
15 Pages

Tribological Analysis of PETG Fire-Retardant Samples Manufactured by FFF

  • Moises Batista,
  • Francisco de Paula Rodriguez-Gonzalez,
  • Gabriela Rodriguez-Garcia,
  • Javier Garcia-Fernandez and
  • Juan Manuel Vazquez-Martinez

15 June 2025

Additive manufacturing via Fused Filament Fabrication (FFF) has enabled the development of functional components with customized mechanical properties. In this context, the use of polymers with flame-retardant additives offers an ideal solution for s...

(This article belongs to the Section Additive Manufacturing Technologies)
  • Article
  • Open Access
12 Citations
4,185 Views
14 Pages

12 May 2023

Recent studies have shown that vertical greenery systems (VGS) carry a significant fire threat when not properly looked after. Building on this, the fire hazard of VGS was compared to two other thermally efficient building façade systems (TEBF...

(This article belongs to the Special Issue Compartment Fire and Safety)
  • Article
  • Open Access
8 Citations
4,211 Views
18 Pages

Effect of Injection Strategies in Diesel/NG Direct-Injection Engines on the Combustion Process and Emissions under Low-Load Operating Conditions

  • Jinze Li,
  • Longfei Deng,
  • Jianjun Guo,
  • Min Zhang and ,
  • Zhenyuan Zi,
  • Jie Zhang and
  • Binyang Wu
  • + 2 authors+ 0 author

22 February 2020

The direct injection of natural gas (NG), which is an important research direction in the development of NG engines, has the potential to improve thermal efficiency and emissions. When NG engines operate in low-load conditions, combustion efficiency...

  • Article
  • Open Access
17 Citations
3,366 Views
16 Pages

Numerical Analysis of Natural Gas Injection in Shougang Jingtang Blast Furnace

  • Kai Wang,
  • Heng Zhou,
  • Yunpeng Si,
  • Shuo Li and ,
  • Pengfei Ji,
  • Jianlong Wu,
  • Jianliang Zhang,
  • Shengli Wu and
  • Mingyin Kou
  • + 4 authors+ 0 author

8 December 2022

A static model of blast furnace operation of natural gas (NG) injection was developed. The effect of NG injection on the raceway adiabatic flame temperature, the amount and composition of bosh gas, the direct reduction degree and fuel ratio were stud...

(This article belongs to the Special Issue Mathematical Modelling of the Ironmaking Blast Furnace)
  • Article
  • Open Access
7 Citations
2,473 Views
27 Pages

Numerical Simulation of Natural Gas/Hydrogen Combustion in a Novel Laboratory Combustor

  • Bruno M. Pinto,
  • Gonçalo P. Pacheco,
  • Miguel A. A. Mendes and
  • Pedro J. Coelho

24 June 2025

Hydrogen is a promising fuel in the current transition to zero-net CO2 emissions. However, most practical combustion equipment is not yet ready to burn pure hydrogen without adaptation. In the meantime, blending hydrogen with natural gas is an intere...

(This article belongs to the Special Issue Advances in Combustion Science and Engineering)
  • Article
  • Open Access
850 Views
26 Pages

4 February 2026

Velocity, pressure, and density fields computed in earlier three-dimensional direct numerical simulations of a statistically stationary, planar, one-dimensional, low-Mach-number hydrogen–air flame propagating in small-scale, moderately intense,...

(This article belongs to the Section A: Sustainable Energy)
  • Feature Paper
  • Article
  • Open Access
43 Citations
8,895 Views
20 Pages

On the Impacts of Pre-Heated Natural Gas Injection in Blast Furnaces

  • Tyamo Okosun,
  • Samuel Nielson,
  • John D’Alessio,
  • Shamik Ray and ,
  • Stuart Street and
  • Chenn Zhou
  • + 1 author+ 0 author

1 July 2020

During recent years, there has been great interest in exploring the potential for high-rate natural gas (NG) injection in North American blast furnaces (BFs) due to the fuel’s relatively low cost, operational advantages, and reduced carbon foot...

(This article belongs to the Special Issue Process Modeling in Pyrometallurgical Engineering)
  • Article
  • Open Access
938 Views
15 Pages

In this work, a fire dynamics simulator numerical model of an industrial and commercial energy storage cabinet equipped with 280 Ah lithium iron phosphate cells is established; full-process quantitative analysis of heat dissipation and the total rele...

  • Article
  • Open Access
36 Citations
4,871 Views
14 Pages

31 May 2021

It is important for fire detectors to operate quickly in the event of a fire, but existing conventional fire detectors sometimes do not work properly or there are problems where non-fire or false reporting occurs frequently. Therefore, in this study,...

(This article belongs to the Section Computing and Artificial Intelligence)
  • Article
  • Open Access
1,006 Views
21 Pages

15 October 2025

This study investigates the effects of secondary jet-guided combustion on the combustion and emissions of a hydrogen direct-injection engine through numerical simulations. The results show that secondary jet-guided combustion, which involves injectin...

  • Article
  • Open Access
66 Citations
8,044 Views
28 Pages

Migration-Based Moth-Flame Optimization Algorithm

  • Mohammad H. Nadimi-Shahraki,
  • Ali Fatahi,
  • Hoda Zamani,
  • Seyedali Mirjalili and ,
  • Laith Abualigah and
  • Mohamed Abd Elaziz
  • + 1 author+ 0 author

18 December 2021

Moth–flame optimization (MFO) is a prominent swarm intelligence algorithm that demonstrates sufficient efficiency in tackling various optimization tasks. However, MFO cannot provide competitive results for complex optimization problems. The alg...

(This article belongs to the Special Issue Evolutionary Process for Engineering Optimization)
  • Feature Paper
  • Article
  • Open Access
41 Citations
5,774 Views
20 Pages

Near Real-Time Monitoring of the Christmas 2018 Etna Eruption Using SEVIRI and Products Validation

  • Stefano Corradini,
  • Lorenzo Guerrieri,
  • Dario Stelitano,
  • Giuseppe Salerno and ,
  • Simona Scollo,
  • Luca Merucci,
  • Michele Prestifilippo,
  • Massimo Musacchio,
  • Malvina Silvestri and
  • Tommaso Caltabiano
  • + 6 authors+ 1 author

23 April 2020

On the morning of 24 December 2018, an eruptive event occurred at Etna, which was followed the next day by a strong sequence of shallow earthquakes. The eruptive episode lasted until 30 December, ranging from moderate strombolian to lava fountain act...

(This article belongs to the Special Issue Convective and Volcanic Clouds (CVC))
  • Article
  • Open Access
1 Citations
5,116 Views
20 Pages

Explosive Characteristics Analysis of Gasoline–Air Mixtures within Horizontal Oil Tanks

  • Xinsheng Jiang,
  • Dongliang Zhou,
  • Peili Zhang,
  • Yunxiong Cai and ,
  • Ri Chen,
  • Donghai He,
  • Xizhuo Qin,
  • Keyu Lin and
  • Sai Wang
  • + 4 authors+ 0 author

11 January 2024

Horizontal oil tanks, like other oil storage containers, carry the risk of explosion when gasoline–air mixtures are ignited. With the widespread application of horizontal oil tanks in the petrochemical industry, attention to safety risks is inc...

(This article belongs to the Special Issue Fire/Explosion Risk Assessment and Loss Prevention of Hazardous Materials, Mines and Natural Gas)
  • Article
  • Open Access
6 Citations
2,969 Views
29 Pages

Exploration of the Optimal Spark Plug Position and the Effect of Ignition Timing on the Combustion and Emission Characteristics of Opposed Rotary Piston Engines

  • Jilong Song,
  • Xiaopan Li,
  • Jianbing Gao,
  • Jian Gao and ,
  • Meng Zhao,
  • Yufeng Wang,
  • Xiaochen Wang,
  • Mingxu Qi,
  • Guohong Tian and
  • Zhongwei Meng
  • + 6 authors+ 1 author

26 February 2025

The opposed rotary piston (ORP) engine, distinguished by its exceptional power-to-weight ratio and uncomplicated design, serves as an optimal power system for Unmanned Aerial Vehicles (UAVs). Based on the three-dimensional simulation platform, the en...

(This article belongs to the Special Issue Advances in Green Propulsion Engine and Environmental Pollution Control)
  • Article
  • Open Access
12 Citations
4,836 Views
23 Pages

Experimental Investigation of Combustion Characteristics on Opposed Piston Two-Stroke Gasoline Direct Injection Engine

  • Fukang Ma,
  • Wei Yang,
  • Junfeng Xu,
  • Yufeng Li and ,
  • Zhenfeng Zhao,
  • Zhenyu Zhang and
  • Yifang Wang
  • + 2 authors+ 0 author

9 April 2021

The combustion characteristics of an opposed-piston two-stroke gasoline engine are investigated with experiment. The energy conversion and exergy destruction are analyzed and the organization method of the combustion process is summarized. The effect...

  • Article
  • Open Access
664 Views
19 Pages

MFFDet: Enhancing Multi-Scale Forest Fire Detection in UAV Imagery

  • Zhengshen Huang,
  • Rui Wang,
  • Xin Li,
  • Weili Kou and ,
  • Qinyan Gu,
  • Zengxing Li,
  • Jiangxia Ye and
  • Qiuhua Wang
  • + 3 authors+ 0 author

4 July 2026

In Unmanned aerial vehicle (UAV) forest fire detection, flames and smoke exhibit dramatic scale variations. Existing methods often struggle with multi-scale feature extraction, fusion quality, and localization reliability, resulting in limited accura...

(This article belongs to the Special Issue Computer Vision and Artificial Intelligence in Fire and Flame Detection)
  • Article
  • Open Access
11 Citations
3,772 Views
21 Pages

23 December 2022

Using high charge dilution low temperature combustion (LTC) strategies in a diesel engine offers low emissions of nitrogen oxides (NOx). These strategies are limited to part-load conditions and involve high levels of charge dilution, typically achiev...

(This article belongs to the Section A: Sustainable Energy)
  • Article
  • Open Access
14 Citations
4,082 Views
30 Pages

Behaviour of Extractives in Norway Spruce (Picea abies) Bark during Pile Storage

  • Eelis S. Halmemies,
  • Raimo Alén,
  • Jarkko Hellström,
  • Otto Läspä and ,
  • Juha Nurmi,
  • Maija Hujala and
  • Hanna E. Brännström
  • + 2 authors+ 0 author

10 February 2022

The current practices regarding the procurement chain of forest industry sidestreams, such as conifer bark, do not always lead to optimal conditions for preserving individual chemical compounds. This study investigates the standard way of storing bar...

(This article belongs to the Special Issue Sustainable Development and Application of Renewable Chemicals from Biomass and Waste)
  • Article
  • Open Access
17 Citations
6,017 Views
14 Pages

19 February 2022

Most modern blast furnaces (BFs) operate with Pulverized Coal Injection (PCI), but renewable and carbon neutral biochar could be applied to reduce the fossil CO2 emission in the short term. In the present study, heat and mass balance-based model (MAS...

  • Article
  • Open Access
14 Citations
4,310 Views
20 Pages

Flammability of Thick but Thermally Thin Materials including Bio-Based Materials

  • Rodolphe Sonnier,
  • Loïc Dumazert,
  • Arnaud Regazzi,
  • Lily Deborde and
  • Christophe Lanos

The fire reaction of various types of flammable lightweight materials is investigated using a cone calorimeter. The influences of parameters such as sample density, sample mass, effective heat of combustion and heat flux on the mass loss after exposi...

(This article belongs to the Special Issue Recent Advances in Flame Retardant Polymeric Materials)
  • Article
  • Open Access
21 Citations
6,582 Views
15 Pages

Vitiation air heater (VAH) combustion characteristics for a direct-connect scramjet combustor (DCSC) were experimentally studied. The VAH consists of a head, modular chamber, and circular-to-rectangular shape transition (CRST) nozzle. The CRST nozzle...

  • Article
  • Open Access
6 Citations
3,213 Views
19 Pages

15 October 2021

The prevalence of intestinal ulcers and parasites was investigated in 2172 grey seals (Halichoerus grypus) collected in the Baltic Sea and 49 grey seals collected outside the Baltic Sea (i.e., the Atlantic). An increase in frequency of ileocaeco-colo...

(This article belongs to the Special Issue Pathology of Marine Mammals)
  • Article
  • Open Access
12 Citations
6,322 Views
25 Pages

10 December 2020

Extreme fires in the peatlands of South East (SE) Asia are arguably the world’s greatest biomass burning events, resulting in some of the worst ambient air pollution ever recorded (PM10 > 3000 µg·m−3). The worst of these f...

(This article belongs to the Special Issue Sensors for Fire and Smoke Monitoring)
  • Article
  • Open Access
5 Citations
5,543 Views
19 Pages

Experimental Research to Increase the Combustion Efficiency in the Top-Lit Updraft Principle Based Gasifier

  • Ioan Pavel,
  • Radu Iulian Rădoi,
  • Gabriela Matache,
  • Ana-Maria Carla Popescu and
  • Kati Pavel

15 February 2023

The recovery of vegetal waste for energy purposes is one of the ways to increase the amount of energy obtained from renewable sources. The Top-Lit Updraft (TLUD) gasification and combustion process is recognized as the least polluting of all other co...

(This article belongs to the Topic Sustainable Thermal Energy Technologies and Processes)
  • Article
  • Open Access
7 Citations
8,294 Views
18 Pages

Biomass cookstoves are used as a common source of heating and cooking in developing countries with most improved cookstove design focusing on developing efficiency in thermal conversion of fuels and safer operation than open flame fires. A top-lit-up...

  • Article
  • Open Access
20 Citations
10,415 Views
12 Pages

A MEMS-Based Quad-Wavelength Hybrid Plasmonic–Pyroelectric Infrared Detector

  • Anh Tung Doan,
  • Takahiro Yokoyama,
  • Thang Duy Dao,
  • Satoshi Ishii and ,
  • Akihiko Ohi,
  • Toshihide Nabatame,
  • Yoshiki Wada,
  • Shigenao Maruyama and
  • Tadaaki Nagao
  • + 4 authors+ 0 author

21 June 2019

Spectrally selective detection is of crucial importance for diverse modern spectroscopic applications such as multi-wavelength pyrometry, non-dispersive infrared gas sensing, biomedical analysis, flame detection, and thermal imaging. This paper repor...

(This article belongs to the Special Issue Infrared Nanophotonics: Materials, Devices, and Applications)

of 2