Skip to Content
You are currently on the new version of our website. Access the old version .

2,745 Results Found

  • Article
  • Open Access
1 Citations
2,292 Views
20 Pages

21 August 2025

Solid Oxide Fuel Cells (SOFCs) offer high-efficiency electrochemical conversion of fuels like natural gas, yet detailed modeling is crucial for optimization. This paper presents a simulation study of a natural gas-fueled SOFC system, developed using...

  • Article
  • Open Access
5 Citations
2,687 Views
11 Pages

13 January 2022

Current density plays a major role in deciding the plant size, current efficiency, and energy consumption in electrorefining cells. In general, operating current density will be 40% of the limiting current density. Forced circulation of the electroly...

(This article belongs to the Topic Exergy Analysis and Its Applications)
  • Article
  • Open Access
5 Citations
3,520 Views
16 Pages

23 March 2023

In order to maximize the reuse of used electronic component resources, while reducing environmental pollution, Cu metal was recycled from wasted CPU sockets by the reformative slurry electrolysis method. However, the influences on the regulation of t...

(This article belongs to the Special Issue Metal Recovery and Separation from Wastes)
  • Article
  • Open Access
2 Citations
1,016 Views
15 Pages

The Role of Current Density Distribution on Local Hardening of 20GL Steel During Electrolytic Plasma Processing

  • Rinat Kurmangaliyev,
  • Bauyrzhan Rakhadilov,
  • Nurlat Kadyrbolat,
  • Rinat Kussainov and ,
  • Almasbek Maulit and
  • Yeldos Mukhametov
  • + 1 author+ 0 author

7 November 2025

This study investigates the influence of current density distribution on the hardening behavior of 20GL cast steel during electrolytic plasma processing (EPP). Experimental and numerical methods were combined to establish the relationship between dis...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Feature Paper
  • Article
  • Open Access
19 Citations
6,150 Views
12 Pages

3 March 2022

In this paper, a method of efficient hydrogen production using low-power electrolysis based on pre-magnetic polarization was proposed in order to improve the rate of hydrogen production by water electrolysis, with reduced energy consumption, molecula...

(This article belongs to the Topic Hydrogen Energy Technologies)
  • Article
  • Open Access
16 Citations
5,477 Views
15 Pages

(i) Objective: The present study aimed to compare the electrochemical corrosion resistance of six different types of fixed lingual retainer wires used as fixed retention appliances in an in vitro study. (ii) Methods: In the study, two different Ringe...

(This article belongs to the Special Issue Advanced Biomaterials and Biotechnology: Applications in Dental Medicine)
  • Feature Paper
  • Article
  • Open Access
5 Citations
3,891 Views
12 Pages

A Novel Reaction Rate Parametrization Method for Lithium-Ion Battery Electrochemical Modelling

  • Alain Goussian,
  • Loïc Assaud,
  • Issam Baghdadi,
  • Cédric Nouillant and
  • Sylvain Franger

To meet the ever-growing worldwide electric vehicle demand, the development of advanced generations of lithium-ion batteries is required. To this end, modelling is one of the pillars for the innovation process. However, modelling batteries containing...

(This article belongs to the Special Issue Modeling, Reliability and Health Management of Lithium-Ion Batteries)
  • Article
  • Open Access
4 Citations
3,273 Views
20 Pages

Systematic Effectiveness Assessment Methodology for Fault Current Indicators Deployed in Distribution Systems

  • Jen-Hao Teng,
  • Chia-Hung Hsieh,
  • Shang-Wen Luan,
  • Bo-Ren Lan and
  • Yun-Fang Li

27 September 2018

Fault Current Indicators (FCIs) with communication interfaces have been widely used in distribution systems to reduce fault-finding time. The effectiveness of a Fault Management System (FMS) composed of FCIs greatly depends on the performance of the...

(This article belongs to the Special Issue Fault Diagnosis on MV and HV Transmission Lines)
  • Article
  • Open Access
3 Citations
1,641 Views
16 Pages

Modeling an All-Copper Redox Flow Battery for Microgrid Applications: Impact of Current and Flow Rate on Capacity Fading and Deposition

  • Mirko D’Adamo,
  • Wouter Badenhorst,
  • Lasse Murtomäki,
  • Paula Cordoba and ,
  • Mohamed Derbeli,
  • Jose A. Saez-Zamora and
  • Lluís Trilla
  • + 2 authors+ 0 author

17 April 2025

The copper redox flow battery (CuRFB) stands out as a promising hybrid redox flow battery technology, offering significant advantages in electrolyte stability. Within the CuBER H-2020 project framework, this study addresses critical phenomena such as...

(This article belongs to the Special Issue Power Quality and Hosting Capacity in the Microgrids)
  • Article
  • Open Access
5 Citations
3,943 Views
11 Pages

24 May 2022

In this paper, the finite element method was used to simulate the response of the scanning vibrating electrode technique (SVET) across an iron–zinc cut-edge sample in order to provide a deeper understanding of the localized corrosion rates meas...

(This article belongs to the Topic Characterization of Electrochemical Materials)
  • Article
  • Open Access
1 Citations
3,300 Views
14 Pages

Enhanced Low-Neutron-Flux Sensitivity Effect in Boron-Doped Silicon

  • Guixia Yang,
  • Kunlin Wu,
  • Jianyong Liu,
  • Dehui Zou and ,
  • Junjie Li,
  • Yi Lu,
  • Xueyang Lv,
  • Jiayun Xu,
  • Liang Qiao and
  • Xuqiang Liu
  • + 5 authors+ 0 author

Space particle irradiation produces ionization damage and displacement damage in semiconductor devices. The enhanced low dose rate sensitivity (ELDRS) effect caused by ionization damage has attracted wide attention. However, the enhanced low-particle...

(This article belongs to the Special Issue Experimental and Numerical Modelling of Nanostructures Processing, Structure and Properties)
  • Review
  • Open Access
50 Citations
7,236 Views
30 Pages

A Recent Progress of Steel Bar Corrosion Diagnostic Techniques in RC Structures

  • Dong Luo,
  • Yuanyuan Li,
  • Junnan Li,
  • Kok-Sing Lim and ,
  • Nurul Asha Mohd Nazal and
  • Harith Ahmad
  • + 1 author+ 0 author

21 December 2018

Corrosion of steel bar is one of key factors undermining reinforced concrete (RC) structures in a harsh environment. This paper attempts to review the non-destructive procedures from the aspect of the corrosion measurement techniques, especially thei...

(This article belongs to the Section Physical Sensors)
  • Review
  • Open Access
108 Citations
17,781 Views
23 Pages

Application of Wireless Power Transmission Systems in Wireless Capsule Endoscopy: An Overview

  • Md Rubel Basar,
  • Mohd Yazed Ahmad,
  • Jongman Cho and
  • Fatimah Ibrahim

19 June 2014

Wireless capsule endoscopy (WCE) is a promising technology for direct diagnosis of the entire small bowel to detect lethal diseases, including cancer and obscure gastrointestinal bleeding (OGIB). To improve the quality of diagnosis, some vital specif...

(This article belongs to the Special Issue Biomedical Sensors and Systems)
  • Article
  • Open Access
16 Citations
3,093 Views
17 Pages

7 November 2022

We exploit the recent determination of the cosmic star formation rate (SFR) density at high redshifts z≳4 to derive astroparticle constraints on three common dark matter (DM) scenarios alternative to standard cold dark matter (CDM): warm dark m...

(This article belongs to the Section Cosmology)
  • Article
  • Open Access
6 Citations
3,965 Views
32 Pages

1 May 2022

The presented study successfully demonstrated advantages of multistep anodization of AA2024—T3. Coating properties and morphology were studied in detail for five anodization processes: a conventional Base process with a constant applied current...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
27 Citations
4,710 Views
10 Pages

A Novel Spinel High-Entropy Oxide (Cr0.2Mn0.2Co0.2Ni0.2Zn0.2)3O4 as Anode Material for Lithium-Ion Batteries

  • Changqing Jin,
  • Yulong Wang,
  • Haobin Dong,
  • Yongxing Wei and ,
  • Ruihua Nan,
  • Zengyun Jian,
  • Zhong Yang and
  • Qingping Ding
  • + 3 authors+ 0 author

In this study, we synthesized spinel high-entropy oxide (HEO) (Cr0.2Mn0.2Co0.2Ni0.2Zn0.2)3O4 nanoparticles by a simple solution combustion method. These particles were investigated for their performance as anodes in lithium-ion batteries. The reversi...

(This article belongs to the Special Issue Inorganic Electrode Materials in High-Performance Energy Storage Devices)
  • Article
  • Open Access
11 Citations
5,655 Views
12 Pages

Rapid Electrodeposition of Fe–Ni Alloy Foils from Chloride Baths Containing Trivalent Iron Ions

  • Changwei Su,
  • Linfu Zhao,
  • Liang Tian,
  • Bixia Wen and ,
  • Mingwu Xiang,
  • Wei Bai and
  • Junming Guo
  • + 2 authors+ 0 author

17 January 2019

This work presents the rapid electrodeposition of Fe–Ni alloy foils from chloride baths containing trivalent iron ions at a low pH (<0.0). The effect of the concentration of Ni2+ ions on the content, surface morphology, crystal structure, an...

  • Article
  • Open Access
Machines2026, 14(11), 1349;https://doi.org/10.3390/machines14111349 
(registering DOI)

15 November 2026

In electrochemical machining (ECM), the inter-electrode gap changes during machining, so uniform machined dimensions are difficult to obtain and, in practice, a conservatively slow feed is used to avoid tool–workpiece contact. In this study, th...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
3 Citations
1,933 Views
12 Pages

Mechanism of Aluminium Electrochemical Oxidation and Alumina Deposition Using a Carbon Sphere Electrode

  • Shumin Yang,
  • Ao Wang,
  • Xuemei Lin,
  • Yunkai Qi and ,
  • Guochao Shi,
  • Wei Han and
  • Jianjun Gu
  • + 2 authors+ 0 author

21 December 2024

Using electromagnetic and electrochemical theories as a framework, this study examines the influence of carbon sphere electrodes on the distribution patterns of anodic oxidation and deposition current densities in metallic aluminium and porous anodic...

(This article belongs to the Section Materials for Energy Applications)
  • Article
  • Open Access
8 Citations
3,693 Views
15 Pages

Electrochemical Performances of a Solid Oxide Electrolysis Short Stack Under Multiple Steady-State and Cycling Operating Conditions

  • Qinhui Ma,
  • Yuhang Zuo,
  • Kaifeng Lu,
  • Yangyiming Rong and ,
  • Wei Su,
  • Hanming Chen and
  • Xinhai Xu
  • + 2 authors+ 0 author

4 November 2024

Solid oxide electrolysis cells (SOECs) are increasingly utilized in hydrogen production from renewable energy sources, yet high degradation rates and unclear degradation mechanisms remain significant barriers to their large-scale application. Consequ...

(This article belongs to the Section Inorganic Solid-State Chemistry)
  • Article
  • Open Access
12 Citations
2,958 Views
11 Pages

The Preparation and Properties of Thick Bronze Coating Using Friction-Assisted Jet Electrodeposition

  • Yilin Yao,
  • Jihua Cheng,
  • Hai Ji,
  • Shiji Zhang and ,
  • Haozhe Pang,
  • Ya Chen and
  • Zongjun Tian
  • + 2 authors+ 0 author

22 January 2024

In this study, a novel friction-assisted jet electrodeposition technology was applied to prepare bronze coating on 40CrNiMoA structural steel surfaces. The bronze electrode was designed with internal flow channels and nozzles, and the friction brushe...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Feature Paper
  • Article
  • Open Access
8 Citations
8,188 Views
9 Pages

Pure Sn Coatings Produced by Pulse Plating from Stannate Bath

  • Ashutosh Sharma,
  • Hyungtak Seo and
  • Byungmin Ahn

30 January 2020

We have produced pure Sn coatings from an alkaline bath plating. The plating bath was composed of sodium stannate and sodium hydroxide with sorbitol as an additive. The experiments were performed with a potentiostat/galvanostat at various current den...

(This article belongs to the Special Issue Coatings and Interfaces)
  • Article
  • Open Access
50 Citations
13,789 Views
11 Pages

Determining the Limiting Current Density of Vanadium Redox Flow Batteries

  • Jen-Yu Chen,
  • Chin-Lung Hsieh,
  • Ning-Yih Hsu,
  • Yi-Sin Chou and
  • Yong-Song Chen

5 September 2014

All-vanadium redox flow batteries (VRFBs) are used as energy storage systems for intermittent renewable power sources. The performance of VRFBs depends on materials of key components and operating conditions, such as current density, electrolyte flow...

(This article belongs to the Special Issue Electrochemical Energy Storage—Battery and Capacitor)
  • Article
  • Open Access
1 Citations
2,352 Views
16 Pages

Analysis and Compensation of Lorentz Force Magnetic Bearing Magnetic Flux Density Uniformity Error

  • Chunmiao Yu,
  • Yuanwen Cai,
  • Weijie Wang,
  • Wenjing Han and ,
  • Zengyuan Yin and
  • Wenting Han
  • + 1 author+ 0 author

24 April 2024

Aiming at the influence of the magnetic flux density uniformity error (MFDUE) of the Lorentz force magnetic bearing (LFMB) on the sensitivity accuracy of magnetically suspended control and sensing gyroscopes (MSCSGs) on the angular rate of a spacecra...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
41 Citations
5,374 Views
18 Pages

6 August 2019

An eco-friendly solid-state symmetric ultracapacitor (Uc) device was fabricated using a polyaniline graphene oxide composite co-doped with sulfuric acid (H2SO4) and dodecyl benzene sulfonic acid (DBSA) or camphor sulfonic acid (CSA), as electrode mat...

(This article belongs to the Special Issue Polymers for Energy Storage and Conversion)
  • Article
  • Open Access
23 Citations
5,537 Views
17 Pages

Effect of Hydrogen Charging on the Stress Corrosion Cracking Behavior of X70 Steel in Simulated Deep Seawater Environment

  • Xiaojia Yang,
  • Feilong Sun,
  • Qing Li,
  • Renzheng Zhu and ,
  • Zhiyong Liu,
  • Cuiwei Du and
  • Xiaogang Li
  • + 2 authors+ 0 author

14 February 2022

The effects of hydrogen charging on the electrochemical and stress corrosion cracking (SCC) behavior of X70 steel in a simulated deep seawater environment were investigated by using electrochemical measurements, slow strain rate tensile (SSRT) tests,...

(This article belongs to the Section Corrosion and Protection)
  • Article
  • Open Access
4 Citations
2,901 Views
14 Pages

28 July 2024

This work investigated the influence of current density, plating solution flow rate, and nozzle outlet-to-cathode distance on the properties of Ni–diamond composite coatings. A multi-physics field simulation was employed to analyze the interpla...

(This article belongs to the Special Issue Advances in Preparation Methods and Numerical Simulation of Composites: Formation and Properties)
  • Article
  • Open Access
7 Citations
3,149 Views
16 Pages

Numerical Investigation of Flow Field Distributions and Water and Thermal Management for a Proton Exchange Membrane Electrolysis Cell

  • Dan Shao,
  • Liangyong Hu,
  • Guoqing Zhang,
  • Kaicheng Hu and ,
  • Jiangyun Zhang,
  • Jun Liu,
  • Kang Peng,
  • Liqin Jiang,
  • Wenzhao Jiang and
  • Yuliang Wen
  • + 5 authors+ 0 author

11 July 2024

The proton exchange membrane electrolysis cell (PEMEC) has attracted considerable attention for large-scale and efficient hydrogen production because of its high current density, high hydrogen purity and fast dynamic response. Flow field distribution...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
16 Citations
4,833 Views
12 Pages

Electrochemical Behaviour of Chalcopyrite in Chloride Solutions

  • Luis Beiza,
  • Víctor Quezada,
  • Evelyn Melo and
  • Gonzalo Valenzuela

11 January 2019

Due to the depletion of oxidized copper ores, it necessitates the need to focus on metallurgical studies regarding sulphide copper ores, such as chalcopyrite. In this research, the electrochemical behaviour of chalcopyrite has been analysed under dif...

(This article belongs to the Special Issue Advances in Hydrometallurgy)
  • Article
  • Open Access
14 Citations
4,006 Views
7 Pages

28 May 2019

Preparation of pure three-dimensional graphene (3DG) with high rate performance for supercapacitors is critical for fast rate charge/discharge. Here, 3DG was prepared via thermal annealing of freeze-dried reduced graphene oxide (RGO) hydrogel under i...

(This article belongs to the Special Issue Advance Electrode Materials for Perovskite Solar Cells and Electrochemical Supercapacitor)
  • Article
  • Open Access
28 Citations
6,485 Views
11 Pages

31 October 2020

Sealing as a post treatment of anodized aluminum is required to enhance the corrosion resistance by filling nanopores, which allow the penetration of corrosive media toward the base aluminum. We designed a mixed sealing solution with nickel acetate a...

(This article belongs to the Special Issue Advances in Materials Processing)
  • Article
  • Open Access
13 Citations
5,015 Views
12 Pages

16 March 2023

Magnesium alloys are an exciting challenge for the biomaterials field given their well-established biodegradability and biocompatibility. However, when exposed to biological fluids, their rapid degradation and hydrogen release are the main drawbacks...

(This article belongs to the Special Issue Advanced Surface Engineering Materials: Characterization and Properties)
  • Article
  • Open Access
9 Citations
7,502 Views
18 Pages

Implementing Binder Gradients in Thick Water-Based NMC811 Cathodes via Multi-Layer Coating

  • Lukas Neidhart,
  • Katja Fröhlich,
  • Franz Winter and
  • Marcus Jahn

Multi-layer coating of electrodes with different material compositions helps unlock the full potential of high-loaded electrodes. Within this work, LiNi0.8Mn0.1Co0.1O2 (NMC811) cathodes with an areal capacity of >8.5 mA h cm−2 and tuned bind...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
2 Citations
1,604 Views
17 Pages

Effect of Current Density on Mechanical and Tribological Properties of Wear-Resistant Cr Coatings

  • Mária Hagarová,
  • Gabriela Baranová,
  • Alica Mašlejová,
  • Peter Horňak and ,
  • Dávid Csík,
  • Marek Vojtko and
  • Martin Truchlý
  • + 2 authors+ 0 author

30 October 2025

As a functional coating, the wear-resistant Cr coating is of considerable importance in metal plating. In the present paper, S235 steel samples were electrodeposited with 5 µm thick Cr coating at current densities of 15, 27 and 40 A dm−2....

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
31 Citations
7,474 Views
18 Pages

Engendering High Energy Density LiFePO4 Electrodes with Morphological and Compositional Tuning

  • Aleksei V. Kubarkov,
  • Alexander V. Babkin,
  • Oleg A. Drozhzhin,
  • Keith J. Stevenson and ,
  • Evgeny V. Antipov and
  • Vladimir G. Sergeyev
  • + 1 author+ 0 author

31 May 2023

Improving the energy density of Li-ion batteries is critical to meet the requirements of electric vehicles and energy storage systems. In this work, LiFePO4 active material was combined with single-walled carbon nanotubes as the conductive additive t...

(This article belongs to the Topic Batteries, Supercapacitors, Fuel Cells and Combined Energy/Power Supply Systems)
  • Article
  • Open Access
41 Citations
5,734 Views
14 Pages

New Limits for Stability of Supercapacitor Electrode Material Based on Graphene Derivative

  • Veronika Šedajová,
  • Petr Jakubec,
  • Aristides Bakandritsos,
  • Václav Ranc and
  • Michal Otyepka

31 August 2020

Supercapacitors offer a promising alternative to batteries, especially due to their excellent power density and fast charging rate capability. However, the cycling stability and material synthesis reproducibility need to be significantly improved to...

(This article belongs to the Special Issue Graphene-Related Materials: Synthesis and Applications)
  • Article
  • Open Access
4 Citations
2,929 Views
23 Pages

Effects of Direct and Pulse Plating on the Co-Deposition of Sn–Ni/TiO2 Composite Coatings

  • Eleni Rosolymou,
  • Antonis Karantonis and
  • Evangelia A. Pavlatou

12 January 2024

Sn–Ni alloy matrix coatings co-deposited with TiO2 nanoparticles (Evonik P25) were produced utilizing direct (DC) and pulse electrodeposition (PC) from a tin–nickel chloride-fluoride electrolyte with a loading of TiO2 nanoparticles equal...

(This article belongs to the Special Issue Current Research in Thin-Film Deposition: From Principles and Technologies to Film Properties and Applications)
  • Article
  • Open Access
7 Citations
3,577 Views
19 Pages

Evaluation of a Combined Approach for Sulfate and Ammonia Recovery from Treated Brine Using a Simultaneous Chemical Precipitation and Electrocoagulation Processes

  • Ameera F. Mohammad,
  • Sabeera Haris,
  • Aya A-H. Mourad,
  • Ali H. Al-Marzouqi and ,
  • Muftah H. El-Naas,
  • Bart Van der Bruggen and
  • Mohamed H. Al-Marzouqi
  • + 2 authors+ 0 author

4 December 2023

Soda ash (Na2CO3) is produced using the traditional Solvay process. It entails the reaction of CO2 with high-salinity water in the presence of ammonia (NH3), which produces insoluble sodium bicarbonate (NaHCO3) and soluble ammonium chloride (NH4Cl)....

  • Article
  • Open Access
1 Citations
900 Views
15 Pages

26 March 2025

Spontaneous counter-current imbibition is a crucial recovery mechanism in water-wet fractured reservoirs, especially in unconventional formations like tight and shale reservoirs. The geometric characteristics of microscale fractures require further c...

(This article belongs to the Special Issue Advances in Enhancing Unconventional Oil/Gas Recovery, 2nd Edition)
  • Article
  • Open Access
29 Citations
4,679 Views
18 Pages

28 April 2022

In this study, reduced graphene oxide (RGO) with a hollow nanostructure was successfully synthesized by layer-by-layer self-assembly using electrostatic interactions and van der Waals forces between building blocks, and its lithium storage characteri...

  • Article
  • Open Access
571 Views
17 Pages

Different Plasma Polishing Regimes Induced by Electrolytic Flow

  • Adel Ghezri,
  • Yan Scholl,
  • Nick Huber,
  • Killang Pratama and ,
  • Thomas Nelis,
  • Jürgen Burger and
  • Cedric Bessire
  • + 2 authors+ 0 author

This study investigates electrolyte jet processing of metals by plasma polishing, focusing on the polishing regimes and their governing flow dynamics, which result in different current density distributions and, consequently, different plasma polishi...

(This article belongs to the Special Issue Recent Developments in Materials Processing for Modern Applications: Advancements and Challenges)
  • Article
  • Open Access
51 Citations
5,495 Views
18 Pages

Electro-Oxidation of Humic Acids Using Platinum Electrodes: An Experimental Approach and Kinetic Modelling

  • Stefano Salvestrini,
  • Angelo Fenti,
  • Simeone Chianese,
  • Pasquale Iovino and
  • Dino Musmarra

10 August 2020

Humic acids (HA) are a potential hazard to aquatic ecosystems and human health. Because biological treatment of contaminated water does not satisfactorily remove these pollutants, novel approaches are under evaluation. This work explores electrochemi...

(This article belongs to the Special Issue Wastewater Engineering and Environmental Catalysis)
  • Article
  • Open Access
2 Citations
3,243 Views
16 Pages

12 October 2018

This paper investigated the effect of oxygen holdup on the current density distribution over the electrode of a vertical/horizontal electrolysis cell with a two-dimensional Eulerian–Eulerian two-phase flow model in the acrylonitrile (AN) electr...

(This article belongs to the Section I: Energy Fundamentals and Conversion)
  • Article
  • Open Access
14 Citations
2,407 Views
12 Pages

Design of Hollow Porous P-NiCo2O4@Co3O4 Nanoarray and Its Alkaline Aqueous Zinc-Ion Battery Performance

  • Zhe Liang,
  • Chenmeng Lv,
  • Luyao Wang,
  • Xiran Li and ,
  • Shiwen Cheng and
  • Yuqiu Huo
  • + 1 author+ 0 author

25 October 2023

Alkaline aqueous zinc-ion batteries possess a wider potential window than those in mildly acidic systems; they can achieve high energy density and are expected to become the next generation of energy storage devices. In this paper, a hollow porous P-...

(This article belongs to the Topic Advances in Chemistry and Chemical Engineering)
  • Article
  • Open Access
14 Citations
4,105 Views
18 Pages

11 August 2021

Electrical parameters of the power supply are significant factors affecting the accuracy and stability of the electrochemical machining (ECM). However, the electric field, flow velocity and temperature in the machining area are difficult to measure d...

(This article belongs to the Special Issue Advances in Ultra-Precision Machining Technology and Applications)
  • Article
  • Open Access
7 Citations
3,808 Views
19 Pages

This work is an effort to mitigate the existing environmental issues caused by brine discharge from Kuwait’s desalination plants and to find an economical and efficient way of managing reject brine from local desalination plants. Low- and high-...

(This article belongs to the Section Membrane Applications for Other Areas)
  • Article
  • Open Access
5 Citations
2,912 Views
19 Pages

5 April 2023

In order to avoid microstructure degradation caused by low frequency induction heat in laser-induction hybrid deposition, this paper proposes a laser/ultra-high frequency (UHF) induction hybrid deposition method. Microstructure observation is carried...

(This article belongs to the Special Issue Risk Assessment and Reliability Engineering of Process Operations)
  • Article
  • Open Access
451 Views
20 Pages

19 September 2026

To address oil-film electrical breakdown in sliding bearings during operation, an electro-thermal coupled transient model that takes into account the electric field, oil film characteristics, heat conduction, and continuous damage was developed in th...

(This article belongs to the Special Issue Lubrication and Tribology Challenges in Renewable Energy and High-Efficiency Power-Generation Systems)
  • Article
  • Open Access
22 Citations
6,103 Views
14 Pages

8 April 2021

Based on the dynamic cycle condition test of a 4.5 kW fuel cell stack, the performance attenuation and individual cell voltage uniformity of the proton exchange membrane fuel cell (PEMFC) stack was evaluated synthetically. The performance decay perio...

(This article belongs to the Special Issue Polymer Electrolytes Membranes)
  • Article
  • Open Access
4 Citations
2,330 Views
12 Pages

3 November 2025

Brass components are widely used in heat dissipation and thermal emission devices due to their high thermal conductivity and ease of processing. However, these applications demand good thermal oxidation resistance, high emissivity, and excellent corr...

(This article belongs to the Special Issue Research Progress and Prospect of Functional Thin Films & Hard Protective Coatings)

of 55