Skip to Content

411 Results Found

  • Article
  • Open Access
13 Citations
3,758 Views
14 Pages

This paper proposes the preliminary results on a novel control architecture based on model predictive control (MPC) for cable-driven parallel robots (CDPRs) and applies them to a three degrees of freedom (3-DOF) robot with a suspended configuration,...

(This article belongs to the Special Issue Dynamic Analysis of Multibody Mechanical Systems)
  • Article
  • Open Access
12 Citations
5,620 Views
17 Pages

27 December 2021

Cable-driven parallel robots (CDPRs) have several advantages and have been widely used in many industrial fields, especially industrial applications that require high dynamics, high payload capacity, and a large workspace. In this study, a design mod...

(This article belongs to the Special Issue Selected Papers from iTIKI IEEE ICASI 2021)
  • Article
  • Open Access
8 Citations
4,430 Views
22 Pages

Dynamic Modeling and Optimization of Tension Distribution for a Cable-Driven Parallel Robot

  • Kai Wang,
  • Zhong Hua Hu,
  • Chen Shuo Zhang,
  • Zhi Wei Han and
  • Chao Wen Deng

25 July 2024

Cable-driven parallel robots (CDPRs) have been gaining much attention due to their many advantages over traditional parallel robots or serial robots, such as their markedly large workspace and lightweight design. However, one of the main issues that...

  • Article
  • Open Access
11 Citations
7,728 Views
12 Pages

Parallel Computational Algorithm for Object-Oriented Modeling of Manipulation Robots

  • Oleg Krakhmalev,
  • Sergey Korchagin,
  • Ekaterina Pleshakova,
  • Petr Nikitin and ,
  • Oksana Tsibizova,
  • Irina Sycheva,
  • Kang Liang,
  • Denis Serdechnyy,
  • Sergey Gataullin and
  • Nikita Krakhmalev
  • + 5 authors+ 0 author

12 November 2021

An algorithm for parallel calculations in a dynamic model of manipulation robots obtained by the Lagrange–Euler method is developed. Independent components were identified in the structure of the dynamic model by its decomposition. Using the te...

  • Article
  • Open Access
7 Citations
5,595 Views
23 Pages

Parallel robots present outstanding advantages compared with their serial counterparts; they have both a higher force-to-weight ratio and better stiffness. However, the existence of closed-chain mechanism yields difficulties in designing control syst...

(This article belongs to the Special Issue Visual Servoing in Robotics)
  • Article
  • Open Access
10 Citations
6,076 Views
26 Pages

12 October 2023

Kinematic modelling of parallel manipulators poses significant challenges due to the absence of analytical solutions for the Forward Kinematics (FK) problem. This study centres on a specific parallel planar robot, specifically a 3RRR configuration, a...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
136 Views
17 Pages

Dynamic Modeling and Cable Tension Optimization of a Redundantly Constrained Cable-Driven Parallel Robot

  • Tao Zhao,
  • Hengfa Wu,
  • Xin Dong,
  • Xiaojun Ding and ,
  • Yang Gao and
  • Sen Qian
  • + 1 author+ 0 author

3 November 2026

To address the problems of cable slackness and non-smooth cable-tension variation curves during the motion of an antagonistic cable-driven parallel robot (CDPR), this paper focuses on a three-degree-of-freedom (DOF) redundantly constrained CDPR. Firs...

(This article belongs to the Special Issue Parallel Kinematic Machines: Actuation, Design, and Applications)
  • Article
  • Open Access
1 Citations
861 Views
32 Pages

Design, Modeling, Self-Calibration and Grasping Method for Modular Cable-Driven Parallel Robots

  • Wanlin Mai,
  • Yonghe Wang,
  • Zhiquan Yang,
  • Bin Zhu and ,
  • Lin Liu and
  • Jianqing Peng
  • + 1 author+ 0 author

2 April 2026

Cable-driven parallel robots (CDPRs) are attractive for large-space manipulation because of their lightweight structure, large workspace, and reconfigurability. However, existing systems still face three practical challenges: limited modularity of th...

(This article belongs to the Special Issue Motor Control and Remote Handling in Robotic Applications)
  • Review
  • Open Access
13 Citations
6,430 Views
19 Pages

25 August 2025

In view of the limitations of traditional rigid joint robots, cable-driven parallel robots (CDPRs) have shown significant advantages such as wide working space and high payload-to-weight ratio by replacing rigid connectors with flexible cables. There...

(This article belongs to the Section Intelligent Robots and Mechatronics)
  • Article
  • Open Access
427 Views
24 Pages

21 September 2026

This study investigates model-based emergency strategies for damage prevention following cable breaks in six-degree-of-freedom cable-driven parallel robots. By relaxing real-time constraints, the empirical performance limit of existing and novel reco...

(This article belongs to the Section Intelligent Robots and Mechatronics)
  • Article
  • Open Access
2 Citations
1,805 Views
25 Pages

20 December 2025

Although the use of adaptive pulleys enhances the motion characteristics of cable-driven parallel robots (CDPRs), it significantly increases the complexity of the kinematics model. Conventional methods often fail to account for the influence of adapt...

(This article belongs to the Special Issue Advanced Sensors for Intelligent Robotic Systems: Vision, Touch, and Dexterous Manipulation)
  • Article
  • Open Access
14 Citations
3,280 Views
23 Pages

Dynamic Modeling and Robust Adaptive Sliding Mode Controller for Marine Cable-Driven Parallel Derusting Robot

  • Yizong Chen,
  • Jian Li,
  • Shenghai Wang,
  • Guangdong Han and ,
  • Yuqing Sun and
  • Weirong Luo
  • + 1 author+ 0 author

16 June 2022

Ship derusting has the characteristics of a complex operation environment, high labor intensity and low efficiency. In order to better cope with this situation, a new type of cable-driven parallel derusting robot (CDPDR) is proposed in this article....

(This article belongs to the Section Marine Science and Engineering)
  • Article
  • Open Access
5 Citations
1,029 Views
13 Pages

A CNN-GRU Model-Based Trajectory Error Predicting and Compensating for a 6-DOF Parallel Robot

  • Zhenjie Zhou,
  • Zhihua Liu,
  • Chenguang Cai,
  • Hongsheng Han and ,
  • Yufen Cao,
  • Shaohui Li and
  • Rongyu Wang
  • + 2 authors+ 0 author

3 December 2025

The six-degree-of-freedom parallel robots is crucial for intelligent manufacturing, motion simulation, aerospace and other fields. Their trajectory performance level directly affects the reliable application of high-precision operation scenarios. How...

  • Article
  • Open Access
4 Citations
3,280 Views
17 Pages

Adaptive Gaussian Mixture Models-Based Anomaly Detection for Under-Constrained Cable-Driven Parallel Robots

  • Julio Garrido,
  • Javier Vales,
  • Diego Silva-Muñiz,
  • Enrique Riveiro and ,
  • Pablo López-Matencio and
  • Josué Rivera-Andrade
  • + 1 author+ 0 author

10 November 2025

Cable-driven parallel robots (CDPRs) are increasingly used for load manipulation tasks involving predefined toolpaths with intermediate stops. At each stop, where the platform maintains a fixed pose, and the motors keep the cables under tension, the...

(This article belongs to the Section AI in Robotics)
  • Article
  • Open Access
7 Citations
3,546 Views
26 Pages

Model-Based Control of a 4-DOF Rehabilitation Parallel Robot with Online Identification of the Gravitational Term

  • Rafael J. Escarabajal,
  • José L. Pulloquinga,
  • Vicente Mata,
  • Ángel Valera and
  • Miguel Díaz-Rodríguez

3 March 2023

Parallel robots are being increasingly used as a fundamental component of lower-limb rehabilitation systems. During rehabilitation therapies, the parallel robot must interact with the patient, which raises several challenges to the control system: (1...

(This article belongs to the Special Issue Rehabilitation Robots: Design, Development, and Control)
  • Article
  • Open Access
1 Citations
976 Views
25 Pages

A Model-Based Digital Toolbox for Unified Kinematics and Dimensional Synthesis in Parallel Robot Design

  • Zhen He,
  • Chengjin Hu,
  • Tengfei Tang,
  • Hanliang Fang and ,
  • Yibo Jiang,
  • Fufu Yang and
  • Jun Zhang
  • + 2 authors+ 0 author

31 December 2025

A unified digital toolbox is introduced for kinematics analysis and dimension synthesis of parallel robots, addressing challenges in configuration diversity and computational complexity. By integrating hierarchical kinematic modeling with screw theor...

(This article belongs to the Section Robotics, Mechatronics and Intelligent Machines)
  • Article
  • Open Access
13 Citations
7,072 Views
23 Pages

Dynamic Model of a Novel Planar Cable Driven Parallel Robot with a Single Cable Loop

  • Antonio González-Rodríguez,
  • Andrea Martín-Parra,
  • Sergio Juárez-Pérez,
  • David Rodríguez-Rosa and ,
  • Francisco Moya-Fernández,
  • Fernando J. Castillo-García and
  • Jesús Rosado-Linares
  • + 2 authors+ 0 author

12 May 2023

Cable-Driven Parallel Robots (CDPRs) are a special kind of parallel manipulator that uses cables to control the position and orientation of the mobile platform or end effector. The use of cables instead of rigid links offers some advantages over thei...

(This article belongs to the Section Actuators for Robotics)
  • Article
  • Open Access
13 Citations
3,979 Views
25 Pages

8 August 2022

This paper introduces a Hexa parallel robot and obstacle collision detection method based on dynamic modeling and a computer vision system. The processes to deal with the collision issues refer to collision detection, collision isolation, and collisi...

(This article belongs to the Section Sensors and Robotics)
  • Article
  • Open Access
14 Citations
3,595 Views
20 Pages

29 November 2022

The dynamic-parameter identification process for developing a suitable precise mathematical model for the implementation and operation of parallel-link robots has received attention. In this study, an efficient and reliable system-identification meth...

(This article belongs to the Section Control Systems)
  • Article
  • Open Access
5 Citations
4,132 Views
19 Pages

Direct and Inverse Kinematics of a 3RRR Symmetric Planar Robot: An Alternative of Active Joints

  • Jordy Josue Martinez Cardona,
  • Manuel Cardona,
  • Jorge I. Canales-Verdial and
  • Jose Luis Ordoñez-Avila

10 May 2024

Existing direct and inverse kinematic models of planar parallel robots assume that the robot’s active joints are all at the bases. However, this approach becomes excessively complex when modeling a planar parallel robot in which the active join...

(This article belongs to the Special Issue Symmetry in Mechanical Engineering: Properties and Applications)
  • Article
  • Open Access
3 Citations
2,475 Views
18 Pages

Kinematic Modeling of a Trepanation Surgical Robot System

  • Adam Wolniakowski,
  • Roman Trochimczuk,
  • Vassilis Moulianitis and
  • Kanstantsin Miatliuk

10 August 2023

This paper presents the concept of a parallel medical robotic service system to assist in a surgical procedure involving precise exploratory trepanation holes in a patient’s skull. The target position and orientation of the trepanation tool in...

(This article belongs to the Special Issue New Challenges in Conceptual Design of Robotic and Mechatronic Systems)
  • Article
  • Open Access
4 Citations
2,706 Views
17 Pages

Taking a spatial parallel robot with flexible joints and links as the research object, a dynamic modeling method for a multi-flexible-body robot system is proposed. Its effectiveness is verified by comparing the numerical model with a simulation mode...

(This article belongs to the Section Networks)
  • Article
  • Open Access
42 Citations
6,315 Views
14 Pages

Enhancing Energy Efficiency of a 4-DOF Parallel Robot Through Task-Related Analysis

  • Lorenzo Scalera,
  • Paolo Boscariol,
  • Giovanni Carabin,
  • Renato Vidoni and
  • Alessandro Gasparetto

25 February 2020

Enhancing energy efficiency is one of the main challenges of today’s industrial robotics and manufacturing technology. In this paper a task-related analysis of the energetic performance of a 4-DOF industrial parallel robot is presented, and the...

(This article belongs to the Special Issue Selected Papers from Advances of Japanese Machine Design)
  • Article
  • Open Access
12 Citations
5,847 Views
16 Pages

1 November 2023

Delta parallel robots have been widely used in precision processing, handling, sorting, and the assembly of parts, and their high efficiency and motion stability are important indexes of their performance.Corners created by small line segments in tra...

(This article belongs to the Special Issue Advanced Mathematical Modeling and Numerical Solutions in Applied Mechanics and Engineering)
  • Article
  • Open Access
13 Citations
3,569 Views
17 Pages

14 February 2022

Cable failure is an extremely critical situation in the operation of cable-driven parallel robots (CDPR), as the robot might be instantly outside of its predefined workspace. Therefore, the calculation of a cable force distribution might fail and, th...

(This article belongs to the Special Issue Dynamics and Control of Robot Manipulators)
  • Article
  • Open Access
10 Citations
3,992 Views
20 Pages

Pose accuracy is one of the most important problems in the application of parallel robots. In order to adhere to strict pose error bounds, a new kinematic calibration method is proposed, which includes a new pose error model with 60 error parameters...

(This article belongs to the Special Issue New Frontiers in Parallel Robots)
  • Article
  • Open Access
25 Citations
2,754 Views
15 Pages

Tolerance Synthesis of Delta-like Parallel Robots Using a Nonlinear Optimisation Method

  • Allaoua Brahmia,
  • Adlen Kerboua,
  • Ridha Kelaiaia and
  • Ameur Latreche

26 September 2023

Robotic systems require high accuracy in manipulating objects. Positioning errors are influenced by geometric tolerances and various sources. This paper introduces a new technique based on the interior-point algorithm optimisation method to allocate...

(This article belongs to the Special Issue Application of Computer Science in Mobile Robots II)
  • Article
  • Open Access
6 Citations
4,747 Views
18 Pages

Design and Dynamic Modeling of a 3-RPS Compliant Parallel Robot Driven by Voice Coil Actuators

  • Chuchao Wang,
  • Shizhou Lu,
  • Caiyi Zhang,
  • Jun Gao and ,
  • Bin Zhang and
  • Shu Wang
  • + 1 author+ 0 author

25 November 2021

In order to increase the driving force of the voice coil actuator while reducing its size and mass, the structural parameters of the coil and magnet in the actuator are optimized by combing Biot–Savart law with Lagrangian interpolation. A 30 mm...

(This article belongs to the Section A: Physics)
  • Article
  • Open Access
25 Citations
7,872 Views
18 Pages

31 May 2023

Delta robot is a lightweight parallel manipulator capable of accurately moving heavy loads at high speed and acceleration along a spatial trajectory. This intensive dynamic process may have a significant impact on the end-effector trajectory precisio...

  • Article
  • Open Access
3 Citations
2,686 Views
27 Pages

4 September 2024

Robotic surgery has been steadily growing, with many new platforms entering the field. Research platforms, however, are limited in number, require a sizable capital expenditure or are difficult to access. This paper presents the analysis and developm...

(This article belongs to the Section Robotics, Mechatronics and Intelligent Machines)
  • Article
  • Open Access
297 Views
30 Pages

A Novel Hybrid Robotic System for UAV Detection and Tracking from a Mobile Ground Platform: Design and Kinematic Analysis

  • Rustem Kaiyrov,
  • Zhumadil Baigunchekov,
  • Azamat Mustafa,
  • Med Amine Laribi and ,
  • Tanin Alibek,
  • Aida Toleuishova,
  • Algazy Zhauyt,
  • Yerik Nugman,
  • Mukhagali Sagyntay and
  • Nurtay Albanbay
  • + 5 authors+ 0 author

Optical systems for unmanned aerial vehicle (UAV) detection and tracking are predominantly deployed on stationary platforms, which limits operational mobility and increases the vulnerability of fixed installations under adverse operating conditions....

(This article belongs to the Section Automation Technology)
  • Article
  • Open Access
25 Citations
20,761 Views
26 Pages

25 July 2023

This paper presents a detailed design of a skid-steering mobile platform with four wheels, along with a Cartesian serial (PPP) manipulator. The aim of this design is to enable the platform to perform various tasks in the agricultural process. The par...

(This article belongs to the Section Robotics, Mechatronics and Intelligent Machines)
  • Article
  • Open Access
15 Citations
5,572 Views
21 Pages

Force-Sensor-Free Implementation of a Hybrid Position–Force Control for Overconstrained Cable-Driven Parallel Robots

  • Luca Guagliumi,
  • Alessandro Berti,
  • Eros Monti,
  • Marc Fabritius and ,
  • Christoph Martin and
  • Marco Carricato
  • + 1 author+ 0 author

31 January 2024

This paper proposes a hybrid position–force control strategy for overconstrained cable-driven parallel robots (CDPRs). Overconstrained CDPRs have more cables (m) than degrees of freedom (n), and the idea of the proposed controller is to control...

(This article belongs to the Section Industrial Robots and Automation)
  • Article
  • Open Access
2 Citations
1,826 Views
19 Pages

Modeling and Analysis of Dynamics of Rigid–Flexible Coupled Parallel Robots

  • Leilei Wang,
  • Wei Xu,
  • Fei Guo,
  • Hao Yan and
  • Yunxue Wang

13 May 2025

Rigid–flexible coupled robots have problems such as vibration and elastic deformation caused by the flexibility of the members during the motion process, which significantly impacts the system’s motion accuracy and dynamics performance. T...

  • Article
  • Open Access
5 Citations
3,922 Views
17 Pages

Modeling and Control of a Cable-Suspended Sling-Like Parallel Robot for Throwing Operations

  • Deng Lin,
  • Giovanni Mottola,
  • Marco Carricato and
  • Xiaoling Jiang

18 December 2020

Cable-driven parallel robots can provide interesting advantages over conventional robots with rigid links; in particular, robots with a cable-suspended architecture can have very large workspaces. Recent research has shown that dynamic trajectories a...

(This article belongs to the Special Issue Modelling and Control of Mechatronic and Robotic Systems)
  • Article
  • Open Access
10 Citations
4,539 Views
22 Pages

Design and Optimization of UAV Aerial Recovery System Based on Cable-Driven Parallel Robot

  • Jun Wu,
  • Yizhang Sun,
  • Honghao Yue,
  • Junyi Yang and ,
  • Fei Yang and
  • Yong Zhao
  • + 1 author+ 0 author

Aerial recovery and redeployment can effectively increase the operating radius and the endurance of unmanned aerial vehicles (UAVs). However, the challenge lies in the effect of the aerodynamic force on the recovery system, and the existing road-base...

(This article belongs to the Special Issue Bio-Inspired Flight Systems and Bionic Aerodynamics 2.0)
  • Article
  • Open Access
17 Citations
12,033 Views
24 Pages

Industrial manipulators and parallel robots are often used for tasks, such as drilling or milling, that require three translational, but only two rotational degrees of freedom (“3T2R”). While kinematic models for specific mechanisms for t...

(This article belongs to the Special Issue Kinematics and Robot Design II, KaRD2019)
  • Article
  • Open Access
3 Citations
1,309 Views
39 Pages

10 February 2026

Compared to purely serial robots or cable-driven parallel robots (CDPRs), cable-driven hybrid robots (CDHRs) combine the advantages of both, addressing their limitations and enabling the execution of complex tasks. The series-parallel coupling struct...

(This article belongs to the Special Issue Advanced Sensors for Intelligent Robotic Systems: Vision, Touch, and Dexterous Manipulation)
  • Article
  • Open Access
16 Citations
5,124 Views
18 Pages

In recent years, cable-driven parallel robots (CDPRs) have drawn more and more attention due to the properties of large workspace, large payload capacity, and ease of reconfiguration. In this paper, we present a kinematic and dynamic modeling and wor...

(This article belongs to the Special Issue New Frontiers in Parallel Robots)
  • Article
  • Open Access
993 Views
27 Pages

Dynamic Modeling and Performance Analysis of a Novel Dual-Platform Biped Robot Based on a 4-UPU Parallel Mechanism

  • Zhaofeng Shi,
  • Shengtao Song,
  • Ruiqin Li,
  • Fengping Ning and ,
  • Lei Zhang and
  • Lianzheng Deng
  • + 1 author+ 0 author

26 November 2025

Biped robots based on parallel mechanisms hold great potential for applications in complex terrains. Based on a 4-UPU parallel mechanism, this paper proposes a novel biped robot that achieves alternating bipedal locomotion and turning with only six a...

(This article belongs to the Special Issue The Kinematics and Dynamics of Mechanisms and Robots)
  • Article
  • Open Access
39 Citations
9,580 Views
19 Pages

Geometric Parameter Calibration for a Cable-Driven Parallel Robot Based on a Single One-Dimensional Laser Distance Sensor Measurement and Experimental Modeling

  • XueJun Jin,
  • Jinwoo Jung,
  • Seong Young Ko,
  • Eunpyo Choi and ,
  • Jong-Oh Park and
  • Chang-Sei Kim
  • + 1 author+ 0 author

23 July 2018

A cable-driven parallel robot has benefits of wide workspace, high payload, and high dynamic response owing to its light cable actuator utilization. For wide workspace applications, in particular, the body frame becomes large to cover the wide worksp...

(This article belongs to the Section Intelligent Sensors)
  • Article
  • Open Access
9 Citations
3,262 Views
23 Pages

12 February 2021

In real-time hybrid model testing, complex ocean structures are emulated by fusing numerical modelling with traditional hydrodynamic model testing. This is done by partitioning the ocean structure under consideration into a numerical and a physical s...

(This article belongs to the Special Issue Waves and Ocean Structures II)
  • Article
  • Open Access
1 Citations
1,646 Views
27 Pages

Methodology for Modeling Coupled Rigid Multibody Systems Using Unitary Quaternions: The Case of Planar RRR and Spatial PRRS Parallel Robots

  • Francisco Cuenca Jiménez,
  • Eusebio Jiménez López,
  • Mario Acosta Flores,
  • F. Peñuñuri and ,
  • Ricardo Javier Peón Escalante and
  • Juan José Delfín Vázquez
  • + 1 author+ 0 author

Quaternions are used in various applications, especially in those where it is necessary to model and represent rotational movements, both in the plane and in space, such as in the modeling of the movements of robots and mechanisms. In this article, a...

(This article belongs to the Topic New Trends in Robotics: Automation and Autonomous Systems)
  • Article
  • Open Access
5 Citations
2,933 Views
14 Pages

20 March 2025

Surface classification is critical for ground robots operating in diverse environments, as it improves mobility, stability, and adaptability. This study introduces IMU-based deep learning models for surface classification as a low-cost alternative to...

(This article belongs to the Special Issue Recent Developments in Machine Design, Automation and Robotics)
  • Article
  • Open Access
4 Citations
2,575 Views
26 Pages

The construction industry faces a growing need for automation to reduce costs, improve accuracy and productivity, and address labor shortages. One area that stands to benefit significantly from automation is panelized prefabricated building envelope...

(This article belongs to the Special Issue Robotics, Automation and Digitization in Construction)
  • Article
  • Open Access
24 Citations
5,170 Views
31 Pages

14 July 2022

Since most of the cable-driven parallel manipulators (CDPMs) are small in dimension or low in speed, the self-weight or inertia of the cable is neglected when dealing with the problems of kinematics, dynamics and workspace. The cable is treated as a...

(This article belongs to the Special Issue New Frontiers in Parallel Robots)
  • Article
  • Open Access
885 Views
26 Pages

25 January 2026

Cable-driven robotic systems are widely used in applications requiring lightweight structures, large workspaces, and accurate force regulation. In such systems, the mechanical behavior of cable-driven actuators is strongly influenced by the elastic p...

(This article belongs to the Section Robotics and Automation)
  • Article
  • Open Access
7 Citations
3,350 Views
18 Pages

Dynamic Modeling and Motion Control Strategy of Cable-Driven Cleaning Robot for Ship Cargo Hold

  • Guangdong Han,
  • Jian Li,
  • Yizong Chen,
  • Shenghai Wang and
  • Haiquan Chen

Ship cargo-hold cleaning is a low-efficiency and high-risk operation in marine industry, which is generally carried out manually, putting the workers in danger. To improve the efficiency and safety of ship cargo-hold cleaning, a C-DCR is proposed in...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
18 Citations
5,081 Views
22 Pages

10 December 2021

Several industrial robotic applications that require high speed or high stiffness-to-inertia ratios use parallel kinematic robots. In the cases where the critical point of the application is the speed, the compliance of the main mechanical transmissi...

(This article belongs to the Special Issue Kinematics and Robot Design IV, KaRD2021)
  • Article
  • Open Access
3 Citations
6,271 Views
25 Pages

Configurable 3D Rowing Model Renders Realistic Forces on a Simulator for Indoor Training

  • Ekin Basalp,
  • Patrick Bachmann,
  • Nicolas Gerig,
  • Georg Rauter and
  • Peter Wolf

21 January 2020

In rowing, rowers need outdoor and indoor training to develop a proficient technique. Although numerous indoor rowing machines have been proposed, none of the devices can realistically render the haptic, visual, and auditory characteristics of an act...

(This article belongs to the Special Issue Biomechanical Spectrum of Human Sport Performance)

of 9