Skip to Content

78,660 Results Found

  • Review
  • Open Access
64 Citations
31,068 Views
19 Pages

14 September 2022

The Cu/low-k damascene process was introduced to alleviate the increase in the RC delay of Al/SiO2 interconnects, but now that the technology generation has reached 1× nm or lower, a number of limitations have become apparent. Due to the integr...

(This article belongs to the Special Issue Advanced CMOS Devices and Applications)
  • Review
  • Open Access
5 Citations
2,677 Views
16 Pages

2 September 2023

Metallization for contacts in organic electronic nanodevices is of great importance for their performance. A lot of effects can appear at the contact/organic interface and modify the contact parameters, such as contact resistance, adhesive strength,...

(This article belongs to the Section Inorganic Chemistry)
  • Article
  • Open Access
73 Citations
5,169 Views
25 Pages

Routes for Metallization of Perovskite Solar Cells

  • Janusz Edward Jacak and
  • Witold Aleksander Jacak

18 March 2022

The application of metallic nanoparticles leads to an increase in the efficiency of solar cells due to the plasmonic effect. We explore various scenarios of the related mechanism in the case of metallized perovskite solar cells, which operate as hybr...

  • Article
  • Open Access
13 Citations
4,276 Views
10 Pages

Metallization on Sapphire and Low-Temperature Joining with Metal Substrates

  • Jiajun Fang,
  • Qiaoxin Zhang,
  • Zhou Luo,
  • Wei Huang and ,
  • Zhenyu Liu,
  • Zhiwen Chen,
  • Xueqiang Cao and
  • Li Liu
  • + 3 authors+ 0 author

26 February 2022

To meet the packaging requirements of sapphire in special electronic components, there is an urgent need for a joining process that can realize a good connection between sapphire and dissimilar metals at a low temperature. In this work, the surface o...

(This article belongs to the Special Issue Physical Metallurgy of Metals and Alloys)
  • Review
  • Open Access
1,251 Views
31 Pages

Thermal Spray Metallization of Polymers: A Review of Hybrid Polymeric–Metallic Coatings

  • Muhammad Imran Khan,
  • Anisa Riaz,
  • Gul Badin,
  • Luyang Xu and ,
  • Xingyu Wang and
  • Ying Huang
  • + 1 author+ 0 author

21 July 2026

In recent years, the quest for advanced materials has intensified, driving the exploration of innovative coating systems to enhance material properties. Polymeric materials, renowned for their adaptability, have found extensive use across various ind...

(This article belongs to the Special Issue Thin Films: Materials, Fabrication Techniques, and Applications)
  • Article
  • Open Access
7 Citations
7,700 Views
12 Pages

7 July 2017

The results of the full-scale testing of the Extruded Briquettes (BREX) as the charge components of the industrial Midrex reactor are discussed. The influence of the type of binder on the degree of metallization of BREX is analyzed. Magnesium sulfate...

  • Article
  • Open Access
2 Citations
2,290 Views
14 Pages

16 May 2023

Metallic nanoparticles are frequently applied to enhance the efficiency of photovoltaic cells via the plasmonic effect, and they play this role due to the unusual ability of plasmons to transmit energy. The absorption and emission of plasmons, dual i...

(This article belongs to the Section Energy Materials)
  • Review
  • Open Access
15 Citations
4,957 Views
18 Pages

DNA-Guided Metallization of Nanomaterials and Their Biomedical Applications

  • Ke Li,
  • Yanfei Liu,
  • Beibei Lou,
  • Yifu Tan and ,
  • Liwei Chen and
  • Zhenbao Liu
  • + 1 author+ 0 author

Precise control of the structure of metallic nanomaterials is critical for the advancement of nanobiotechnology. As DNA (deoxyribonucleic acid) can readily modify various moieties, such as sulfhydryl, carboxyl, and amino groups, using DNA as a direct...

(This article belongs to the Section Medicinal Chemistry)
  • Feature Paper
  • Article
  • Open Access
12 Citations
4,992 Views
12 Pages

Metallization of Organically Modified Ceramics for Microfluidic Electrochemical Assays

  • Ashkan Bonabi,
  • Sari Tähkä,
  • Elisa Ollikainen,
  • Ville Jokinen and
  • Tiina Sikanen

12 September 2019

Organically modified ceramic polymers (ORMOCERs) have attracted substantial interest in biomicrofluidic applications owing to their inherent biocompatibility and high optical transparency even in the near-ultraviolet (UV) range. However, the processe...

(This article belongs to the Special Issue Polymer Based Microsystems)
  • Review
  • Open Access
281 Views
44 Pages

Low-Temperature Plasma-Assisted Metallization of PTFE: A Focused Review

  • Meiyan Chen,
  • Jinru Ou,
  • Yue Zhang,
  • Xuan Liu and ,
  • Ke Yao,
  • Xueping Geng,
  • Deli Tang,
  • Wei Zou,
  • Fanya Jin and
  • Jun Zhou
  • + 5 authors+ 0 author

Polytetrafluoroethylene (PTFE) is an important dielectric and structural substrate for high-frequency, flexible, low-background, and other electronic systems because of its low dielectric loss, high electrical resistivity, low moisture absorption, ch...

(This article belongs to the Special Issue Ultra-Low-Power ICs for the Internet of Things (3rd Edition))
  • Article
  • Open Access
7 Citations
3,122 Views
12 Pages

On-Demand Metallization System Using Micro-Plasma Bubbles

  • Yu Yamashita,
  • Shinya Sakuma and
  • Yoko Yamanishi

13 August 2022

3D wiring technology is required for the integration of micro–nano devices on various 3D surfaces. However, current wiring technologies cannot be adapted to a variety of materials and surfaces. Here, we propose a new metal deposition method usi...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
9 Citations
2,517 Views
12 Pages

Selection of Optimal Process Parameters for Arc Metallization

  • Bauyrzhan Rakhadilov,
  • Dastan Buitkenov,
  • Akbota Apsezhanova,
  • Dauir Kakimzhanov and ,
  • Aiym Nabioldina and
  • Nurtoleu Magazov
  • + 1 author+ 0 author

4 March 2025

This paper studies the coatings deposited on a 65G steel substrate by electric arc metallization using a 30KhGSA wire. The properties of the coatings obtained at 30 V, 40 V and 45 V are discussed, including their microstructure, porosity, microhardne...

  • Article
  • Open Access
14 Citations
4,425 Views
12 Pages

Metallization and Diffusion Bonding of CoSb3-Based Thermoelectric Materials

  • Hangbin Feng,
  • Lixia Zhang,
  • Jialun Zhang,
  • Wenqin Gou and ,
  • Sujuan Zhong,
  • Guanxing Zhang,
  • Huiyuan Geng and
  • Jicai Feng
  • + 3 authors+ 0 author

3 March 2020

CoSb3-based skutterudite alloy is one of the most promising thermoelectric materials in the middle temperature range (room temperature—550 °C). However, the realization of an appropriate metallization layer directly on the sintered skutteru...

(This article belongs to the Special Issue Recent Advances in Thermoelectric Materials for High Efficiency Energy Conversion and Refrigeration)
  • Article
  • Open Access
5 Citations
3,482 Views
20 Pages

20 December 2021

Polycrystalline cBN/copper composite abrasive particles were prepared by an electroless powder coating process. Ti metallization and tin/silver metallization techniques were used to improve the coating process by depositing an autocatalytic metallic...

(This article belongs to the Section Advanced and Functional Ceramics and Glasses)
  • Article
  • Open Access
1,408 Views
15 Pages

Tantalum Interconnect Metallization for Thin-Film Neural Interface Devices

  • Justin R. Abbott,
  • Yupeng Wu,
  • Zachariah M. Campanini,
  • Alexandra Joshi-Imre and ,
  • Felix Deku and
  • Stuart F. Cogan
  • + 1 author+ 0 author

10 March 2026

Neural interfaces created using thin-film fabrication rely primarily on conductive metal traces for electrical interconnects. Here, we explore the use of tantalum (Ta) metal interconnects as a replacement for noble-metal interconnects such as Au, Pt...

(This article belongs to the Special Issue Neural Microelectrodes: Design, Integration, and Applications)
  • Article
  • Open Access
4 Citations
2,238 Views
12 Pages

Photochemical Metallization: Advancements in Polypropylene Surface Treatment

  • Bagdagul Serikbayeva,
  • Malik Satayev,
  • Shaizada Koshkarbayeva,
  • Abdugani Azimov and ,
  • Kalamkas Amanbayeva,
  • Guzaliya Sagitova,
  • Aliya Suigenbayeva,
  • Myrzabai Narmanov and
  • Artem Kolesnikov
  • + 4 authors+ 0 author

7 September 2023

The work was devoted to the development of technology for applying metal coatings to the surface of polypropylene products. At the same time, the main stages of the technology were carried out using the influence of electromagnetic waves of light rad...

(This article belongs to the Section Polymer Applications)
  • Review
  • Open Access
885 Views
31 Pages

A Review of Research Progresses in Through-Glass Via (TGV) Metallization

  • Tailong Shi,
  • Lihong Chen,
  • Qi Li,
  • Yubing Luo and
  • Shunyu Yao

22 October 2026

Through-glass vias (TGVs), as key vertical interconnect structures in 2.5-D/3-D advanced packaging, offer low dielectric loss, low parasitic capacitance, and excellent high-frequency transmission performance. However, several challenges remain in TGV...

(This article belongs to the Special Issue Electronic and Photonic Device Integration and Packaging)
  • Article
  • Open Access
10 Citations
3,268 Views
11 Pages

26 October 2018

In order to improve the mechanical properties of the wood surface and explore the mechanical effect of wood veneer surface metallization, the 31-year-old Pinus sylvestris is taken as the research object and Cu is deposited on the wood surface by magn...

  • Article
  • Open Access
2 Citations
3,621 Views
10 Pages

Metallization by Sputtering to Improve the Bond Strength between Zirconia Ceramics and Resin Cements

  • Tatsuya Kimura,
  • Yujin Aoyagi,
  • Norimasa Taka,
  • Mitsugu Kanatani and
  • Katsumi Uoshima

Zirconia has been used as a prosthesis material for over a decade because of its excellent mechanical properties and esthetics. The surface treatment for zirconia generally involves sandblasting and the application of primers for favorable bond stren...

(This article belongs to the Section Dental Biomaterials)
  • Article
  • Open Access
337 Views
17 Pages

Influence of Process Parameters on Chromium Metallization During Chromite Pellet Pre-Reduction

  • Ainash Akmanova,
  • Aristotel Issagulov,
  • Saule Sagintayeva,
  • Dastan Aubakirov and ,
  • Diana Issagulova,
  • Aibar Myrzagaliyev and
  • Yerbolat Makhambetov
  • + 2 authors+ 0 author

22 September 2026

The present study compares the effects of temperature, holding time, and nominal carbon excess on the pre-reduction of Donskoy chromite pellets with semi-coke. FactSage equilibrium calculations were interpreted alongside three laboratory series with...

(This article belongs to the Section Extractive Metallurgy)
  • Article
  • Open Access
32 Citations
12,822 Views
12 Pages

25 May 2017

Nickel (Ni) metallization of polyimide (PI) was performed using a solution-based process including imide-ring opening reactions, the implanting of Ni ions, the reduction of catalytic Ni nanoparticles, and the electroless deposition of a Ni film. The...

  • Article
  • Open Access
1 Citations
1,893 Views
21 Pages

10 May 2025

This study investigates the impact of modeling the aluminum (Al) metallization layer as an integrated part of the chip model, versus as an individual component, on the results of electrical–thermal analysis of power semiconductor packages using...

  • Article
  • Open Access
12 Citations
3,704 Views
15 Pages

14 November 2021

The paper presents the results of copper electroless metallization of cellulose paper with the use of a polydopamine coating and silver catalyst. The polydopamine coating was deposited via a simple dip method using a dopamine hydrochloride solution i...

(This article belongs to the Special Issue Innovative Technologies and Materials for Coatings and Surface Treatments)
  • Article
  • Open Access
12 Citations
5,536 Views
17 Pages

Effectiveness of Sensors Contact Metallization (Ti, Au, and Ru) and Biofunctionalization for Escherichia coli Detection

  • Sabina Górska,
  • Artur Rydosz,
  • Ewa Brzozowska,
  • Marek Drab and ,
  • Krzysztof Wincza,
  • Andrzej Gamian and
  • Sławomir Gruszczyński
  • + 2 authors+ 0 author

2 September 2018

In designing a bacteria biosensor, various issues must be addressed: the specificity of bacteria recognition, the immobilization of biomolecules that act as the bacteria receptor, and the selectivity of sensor surface. The aim of this paper was to ex...

(This article belongs to the Special Issue Nanostructured Surfaces in Sensing Systems)
  • Article
  • Open Access
2,786 Views
14 Pages

Research on the Mechanical Failure Risk Points of Ti/Cu/Ti/Au Metallization Layer

  • Mingrui Zhao,
  • Xiaodong Jian,
  • Si Chen,
  • Minghui Chen and ,
  • Gang Wang,
  • Tao Gong,
  • Yangning Tian,
  • Xiangjun Lu,
  • Zhenbo Zhao and
  • Xiaofeng Yang
  • + 5 authors+ 0 author

23 November 2023

The cohesive performance and durability of the bonding layer with semiconductor substrates are of paramount importance for realizing the high thermal conductivity capabilities of diamond. Utilizing electron beam evaporation and the room-temperature,...

(This article belongs to the Special Issue Residual Stress Effects in Advanced Manufacturing and Electronics Packaging)
  • Feature Paper
  • Article
  • Open Access
1 Citations
2,138 Views
22 Pages

Post-Release Metallization in MEMS Silicon-to-Silicon Contact Switches for On-Resistance Improvement

  • Abdurrashid Hassan Shuaibu,
  • Almur A. S. Rabih,
  • Yves Blaquière and
  • Frederic Nabki

26 February 2026

This work reports a post-release sputter-metallization process for microelectromechanical systems (MEMS) switches with silicon-to-silicon (Si-to-Si) contacts fabricated by deep reactive ion etching. Platinum (Pt) was selectively deposited on the cont...

(This article belongs to the Special Issue Emerging Technologies and Applications for Semiconductor Industry)
  • Article
  • Open Access
21 Citations
3,968 Views
12 Pages

30 June 2021

Graphene has attracted a lot of interest as a potential replacement for silicon in future integrated circuits due to its remarkable electronic and transport properties. In order to meet technology requirements for an acceptable bandgap, graphene need...

(This article belongs to the Section Electronic Materials)
  • Article
  • Open Access
2 Citations
2,917 Views
9 Pages

Influence of Alloying Elements on the Mechanical Properties of Anodized Aluminum and on the Adhesion of Copper Metallization

  • Oleg S. Medvedev,
  • Ekaterina E. Alyasova,
  • Rona E. Besprozvannaya,
  • Asadula A. Gadzhiev and ,
  • Veronika V. Krivova,
  • Andrey S. Kondratev,
  • Artem E. Kim,
  • Pavel A. Novikov and
  • Anatoliy A. Popovich
  • + 4 authors+ 0 author

19 November 2021

The active development of the power electronics market and a constant increase in the prices of components require new materials and approaches, including a power module packaging technology. The use of aluminum instead of copper in the power module...

(This article belongs to the Special Issue Advances in Metal and Ceramic Matrix Composites)
  • Feature Paper
  • Article
  • Open Access
11 Citations
6,631 Views
8 Pages

28 October 2017

Recently, SnSe material with an outstanding high ZT (Figure of merit) of 2.6 has attracted much attention due to its strong applicability for highly efficient thermoelectric devices. Many studies following the first journal publication have been focu...

(This article belongs to the Special Issue Development and Application of Thermoelectric Power Generators, Energy Harvesters and Refrigerators)
  • Communication
  • Open Access
6 Citations
4,008 Views
10 Pages

Impact Analysis of Metallization Design and Recombination Losses on Performance of Crystalline Silicon Solar Cells

  • Nowshad Amin,
  • Sathiswary Santhiran,
  • Nabilah Mat Kassim,
  • Ammar Ahmed Alkahtani and ,
  • Mohammad Aminul Islam and
  • Mohd Yusrizal Mohd Yusof
  • + 1 author+ 0 author

9 September 2023

Using Griddler software, this study aims to select the optimal metallization design by analyzing the impact of the number and sizes of busbars and fingers on a solar cell’s performance. There is interest in the PV industry to reduce the finger...

(This article belongs to the Section A2: Solar Energy and Photovoltaic Systems)
  • Article
  • Open Access
11 Citations
8,560 Views
11 Pages

A Passive Pressure Sensor Fabricated by Post-Fire Metallization on Zirconia Ceramic for High-Temperature Applications

  • Tao Luo,
  • Qiulin Tan,
  • Liqiong Ding,
  • Tanyong Wei and ,
  • Chao Li,
  • Chenyang Xue and
  • Jijun Xiong
  • + 2 authors+ 0 author

29 September 2014

A high-temperature pressure sensor realized by the post-fire metallization on zirconia ceramic is presented. The pressure signal can be read out wirelessly through the magnetic coupling between the reader antenna and the sensor due to that the sensor...

  • Article
  • Open Access
21 Citations
4,233 Views
13 Pages

Phase Transition and Metallization of Orpiment by Raman Spectroscopy, Electrical Conductivity and Theoretical Calculation under High Pressure

  • Kaixiang Liu,
  • Lidong Dai,
  • Heping Li,
  • Haiying Hu and ,
  • Linfei Yang,
  • Chang Pu,
  • Meiling Hong and
  • Pengfei Liu
  • + 3 authors+ 0 author

7 March 2019

The structural, vibrational, and electronic characteristics in orpiment were performed in the diamond anvil cell (DAC), combined with a series of experimental and theoretical research, including Raman spectroscopy, impedance spectroscopy, atomic forc...

(This article belongs to the Special Issue Engineering Properties of Superconducting Materials)
  • Article
  • Open Access
1 Citations
1,540 Views
21 Pages

2 November 2025

The pattern of the front contact metallization critically influences solar cell efficiency. This study introduces a novel explicit geometry optimization approach for designing the front contact metallization patterns. In the proposed approach, the fr...

  • Article
  • Open Access
388 Views
21 Pages

Ni-Ion-Implantation-Assisted Ultrathin Interlayer for Cu/PI Metallization in Low-Power Electronics

  • Meiyan Chen,
  • Yue Zhang,
  • Xuan Liu,
  • Li Zhong and ,
  • Ke Yao,
  • Xueping Geng,
  • Jinru Ou,
  • Deli Tang,
  • Fanya Jin and
  • Jun Zhou
  • + 5 authors+ 0 author

Reliable Cu/polyimide (PI) metallization requires strong interfacial adhesion while minimizing the thickness of the metallic adhesion layer. In this study, Ni ion implantation was combined with physical vapor deposition to construct an ultrathin Ni i...

(This article belongs to the Special Issue Ultra-Low-Power ICs for the Internet of Things (3rd Edition))
  • Article
  • Open Access
9 Citations
3,663 Views
13 Pages

Copper Filled Poly(Acrylonitrile-co-Butadiene-co-Styrene) Composites for Laser-Assisted Selective Metallization

  • Piotr Rytlewski,
  • Bartłomiej Jagodziński,
  • Tomasz Karasiewicz,
  • Piotr Augustyn and ,
  • Daniel Kaczor,
  • Rafał Malinowski,
  • Krzysztof Szabliński,
  • Marcin Mazurkiewicz and
  • Krzysztof Moraczewski
  • + 4 authors+ 0 author

12 May 2020

Selective metallization of polymeric materials using the technique known as laser direct structuring (LDS) is intensively developed. In this technique, metallized products can be manufactured by injection molding or by 3D printing process if rapid pr...

(This article belongs to the Collection Advanced Composite Materials and Structures for Aerospace, Automotive and Civil Engineering Applications)
  • Article
  • Open Access
12 Citations
7,233 Views
14 Pages

10 September 2021

Advancements in production techniques in PCB manufacturing industries are still required as compared to silicon-ICs fabrications. One of the concerned areas in PCBs fabrication is the use of conventional methodologies for metallization. Most of the m...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
17 Citations
4,568 Views
11 Pages

Structural Phase Transition and Metallization of Nanocrystalline Rutile Investigated by High-Pressure Raman Spectroscopy and Electrical Conductivity

  • Meiling Hong,
  • Lidong Dai,
  • Heping Li,
  • Haiying Hu and ,
  • Kaixiang Liu,
  • Linfei Yang and
  • Chang Pu
  • + 2 authors+ 0 author

18 July 2019

We investigate the structural, vibrational, and electrical transport properties of nanocrystalline rutile and its high-pressure polymorphs by Raman spectroscopy, and AC complex impedance spectroscopy in conjunction with the high-resolution transmissi...

(This article belongs to the Special Issue Nanomineralogy)
  • Article
  • Open Access
402 Views
17 Pages

24 June 2026

This paper presents proprietary, multi-platform software developed in Python for analyzing the electrical and microstructural properties of silicon solar cell metallization. Utilizing a sample set of 20 commercial solar cells, electrical resistivity...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
20 Citations
5,931 Views
9 Pages

12 December 2019

Polymer, especially polyimide (PI), is the best suitable substrate material for the design of flexible electronics. The compact silver can be reduced on the surface of PI films by surface modification and in situ self-metallization technique. The for...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
14 Citations
5,970 Views
14 Pages

Effects on Metallization of n+-Poly-Si Layer for N-Type Tunnel Oxide Passivated Contact Solar Cells

  • Qinqin Wang,
  • Beibei Gao,
  • Wangping Wu,
  • Kaiyuan Guo and ,
  • Wei Huang and
  • Jianning Ding
  • + 1 author+ 0 author

5 June 2024

Thin polysilicon (poly-Si)-based passivating contacts can reduce parasitic absorption and the cost of n-TOPCon solar cells. Herein, n+-poly-Si layers with thicknesses of 30~100 nm were fabricated by low-pressure chemical vapor deposition (LPCVD) to c...

(This article belongs to the Special Issue Advanced Materials for Solar Energy Utilization)
  • Article
  • Open Access
6 Citations
6,895 Views
12 Pages

11 March 2020

GaAs monolithic microwave integrated circuits (MMICs) with different back metallization systems (TiW/Au and Au/Ti/Au) exhibit different problems in the automatic Au-Sn eutectic bonding process, such as edge breakage or excessive voids. In this study,...

  • Article
  • Open Access
6 Citations
3,254 Views
21 Pages

Macro–Mesoscale Modeling of the Evolution of the Surface Roughness of the Al Metallization Layer of an IGBT Module during Power Cycling

  • Tong An,
  • Xueheng Zheng,
  • Fei Qin,
  • Yanwei Dai and ,
  • Yanpeng Gong and
  • Pei Chen
  • + 1 author+ 0 author

26 February 2023

One of the main failure modes of an insulated-gate bipolar transistor (IGBT) module is the reconstruction of an aluminum (Al) metallization layer on the surface of the IGBT chip. In this study, experimental observations and numerical simulations were...

  • Article
  • Open Access
2 Citations
2,749 Views
16 Pages

26 August 2022

This paper presents the design and simulation of a mass sensitive Lamb wave microsensor with CMOS technology provided by SilTerra. In this work, the effects of the metalization ratio variation on the transmission gain, total harmonic distortion (THD)...

(This article belongs to the Section Biomedical Sensors)
  • Article
  • Open Access
2 Citations
1,167 Views
21 Pages

Interfacial Modulation of Laser-Deposited Ti6Al4V-TiC Wear-Resistant Coatings: Surface Ni-P Metallization of TiC Particles

  • Yiming Wu,
  • Yingfei Yang,
  • Jie Li,
  • Chuanyong Yu and ,
  • Xinwei Du,
  • Hu Zhao,
  • Dexin Chen,
  • Wei Li,
  • Qiwei Wang and
  • Peng Zhang
  • + 5 authors+ 0 author

Prior to the laser processing, the surface of the TiC-reinforced particles underwent a metallization process with Ni-P, with the objective of enhancing the wettability between the TiC and the Ti6Al4V, thereby ensuring enhanced wear resistance of the...

(This article belongs to the Special Issue Laser Surface Engineering and Additive Manufacturing)
  • Article
  • Open Access
506 Views
16 Pages

Experimental Observations on the Structural Transitions and Metallization in the Two-Dimensional Layered Compound of Cadmium Phosphide Sulfide Under Extreme Conditions

  • Xinyu Zhang,
  • Lidong Dai,
  • Haiying Hu,
  • Ziqiang Xu and ,
  • Juxiang Shao,
  • Hongchun Luo,
  • Jiajun Zhu,
  • Zhongying Mi,
  • Tao Wang and
  • Meiling Hong
  • + 7 authors+ 2 authors

8 August 2026

Cadmium phosphorous trisulfide (CdPS3), a prototypical member of metal thio- and selenophosphates (MTPs), has garnered tremendous research interest due to its fundamental properties and potential for novel applications. In this paper, we conducted a...

(This article belongs to the Topic Functional Materials: Cross-Scale Innovations from Molecular Design to Macroscopic Applications)
  • Article
  • Open Access
479 Views
18 Pages

10 September 2026

Alumina (Al2O3) ceramic sealing rings have attracted considerable attention in power battery packaging applications due to their excellent chemical stability, electrical insulation, and mechanical properties. In this study, 95% Al2O3 ceramics were fa...

(This article belongs to the Special Issue Advances in Ceramics, 3rd Edition)
  • Article
  • Open Access
3 Citations
1,804 Views
12 Pages

The Effect of Antimony (III) Oxide on the Necessary Amount of Precursors Used in Laser-Activated Coatings Intended for Electroless Metallization

  • Bartłomiej Jagodziński,
  • Piotr Rytlewski,
  • Krzysztof Moraczewski,
  • Andrzej Trafarski and
  • Tomasz Karasiewicz

25 July 2022

The article presents research on the potential use of organometallic compounds with the addition of antimony (III) oxide Sb2O3 as a coating additive that will make coatings susceptible to electroless metallization after prior surface irradiation with...

  • Article
  • Open Access
27 Citations
4,976 Views
12 Pages

RETRACTED: Structure Investigation of Titanium Metallization Coating Deposited onto AlN Ceramics Substrate by Means of Friction Surfacing Process

  • Tomasz Chmielewski,
  • Michał Hudycz,
  • Arkadiusz Krajewski,
  • Tadeusz Sałaciński and ,
  • Beata Skowrońska and
  • Rafał Świercz
  • + 1 author+ 0 author

10 December 2019

The article presents selected properties of a titanium metallization coating deposited on aluminum nitride (AlN) ceramics surface by means of the friction surfacing method. Its mechanism is based on the formation of a joint between the surface of an...

  • Article
  • Open Access
33 Citations
8,408 Views
10 Pages

Laser-Induced-Plasma-Assisted Ablation and Metallization on C-Plane Single Crystal Sapphire (c-Al2O3)

  • Xizhao Lu,
  • Feng Jiang,
  • Tingping Lei,
  • Rui Zhou and ,
  • Chentao Zhang,
  • Gaofeng Zheng,
  • Qiuling Wen and
  • Zhong Chen
  • + 3 authors+ 0 author

7 October 2017

Laser-induced-plasma-assisted ablation (LIPAA) is a promising micro-machining method that can fabricate microstructure on hard and transparent double-polished single crystal sapphire (SCS). While ablating, a nanosecond pulse 1064 nm wavelength laser...

(This article belongs to the Special Issue Plasma-Based Surface Engineering)
  • Article
  • Open Access
4 Citations
3,092 Views
14 Pages

26 June 2021

A series of investigations on the structural, vibrational, and electrical transport characterizations for Ga2Se3 were conducted up to 40.2 GPa under different hydrostatic environments by virtue of Raman scattering, electrical conductivity, high-resol...

(This article belongs to the Section Inorganic Crystalline Materials)

of 1,574