Skip to Content
You are currently on the new version of our website. Access the old version .

18,190 Results Found

  • Article
  • Open Access
4 Citations
3,219 Views
16 Pages

Thermal Finite-Element Model of Electric Machine Cooled by Spray

  • Christian Bergfried,
  • Samaneh Abdi Qezeljeh,
  • Ilia V. Roisman,
  • Herbert De Gersem and ,
  • Jeanette Hussong and
  • Yvonne Späck-Leigsnering
  • + 1 author+ 0 author

28 December 2024

The demand for higher power density in electrical machines necessitates advanced cooling strategies. Spray cooling emerges as a promising and relatively straightforward technology, albeit involving complex physics. In this paper, a quasi-3D thermal f...

(This article belongs to the Special Issue Numerical Simulation Techniques for Fluid Flows and Heat Transfer)
  • Article
  • Open Access
2 Citations
1,624 Views
16 Pages

Research on Broken Wire Based on a Fine Finite Element Model of Steel Strands

  • Dongmei Tan,
  • Yongfa Luo,
  • Yu Tao,
  • Yu Peng and ,
  • Hao Luo and
  • Baifeng Ji
  • + 1 author+ 0 author

2 July 2025

In order to study the mechanical properties of seven-wire steel strands after wire breakage failure, this study is based on the established finite-element beam-element model of seven-wire steel strands and analyzes two failure forms of symmetric wire...

  • Article
  • Open Access
34 Citations
12,514 Views
16 Pages

Finite-Element Modeling of Viscoelastic Cells During High-Frequency Cyclic Strain

  • Jaques S. Milner,
  • Matthew W. Grol,
  • Kim L. Beaucage,
  • S. Jeffrey Dixon and
  • David W. Holdsworth

22 March 2012

Mechanotransduction refers to the mechanisms by which cells sense and respond to local loads and forces. The process of mechanotransduction plays an important role both in maintaining tissue viability and in remodeling to repair damage; moreover, it...

  • Article
  • Open Access
4 Citations
3,480 Views
16 Pages

(1) This article is devoted to the development of a theoretical and algorithmic basis for numerical modeling of the spontaneous potential method (SP) as applied to the study of sandy-argillaceous reservoirs. (2) In terms of coupled flows, we consider...

(This article belongs to the Section Geophysics)
  • Article
  • Open Access
322 Views
37 Pages

Finite-element analysis (FEA) is a widely used computational method for predicting the biomechanical response of implant-supported prostheses, but its computational cost limits its use in large-scale parametric exploration or chairside decision suppo...

(This article belongs to the Section Artificial Intelligence-Based Technologies)
  • Article
  • Open Access
4 Citations
2,872 Views
18 Pages

4 September 2024

The traditional finite element method (FEM) has limitations in accurately modeling crack propagation. Peridynamics, a nonlocal extension of the classical continuum theory, provides an alternative approach to remedy the limitations of the FEM but with...

  • Article
  • Open Access
4 Citations
3,077 Views
17 Pages

3D Airborne EM Forward Modeling Based on Finite-Element Method with Goal-Oriented Adaptive Octree Mesh

  • Xue Han,
  • Jianfu Ni,
  • Changchun Yin,
  • Bo Zhang and ,
  • Xin Huang,
  • Jiao Zhu,
  • Yunhe Liu,
  • Xiuyan Ren and
  • Yang Su
  • + 4 authors+ 0 author

29 May 2023

The finite-element (FE) method for three-dimensional (3D) airborne electromagnetic (AEM) modeling can flexibly simulate complex geological structures at high accuracy. However, it has low efficiency and high computational requirements. To solve these...

(This article belongs to the Special Issue Multi-Scale Remote Sensed Imagery for Mineral Exploration)
  • Article
  • Open Access
550 Views
30 Pages

Vacuum Preloading for Enhanced Uplift Performance of Suction Buckets in Soft Clay: Model Tests and Hydro-Mechanical Finite-Element Analysis

  • Zhen Huang,
  • Chenyang He,
  • Lei Fan,
  • Linkai Wang and ,
  • Yongjin Zhang and
  • Li Shi
  • + 1 author+ 0 author

Suction bucket foundations provide an efficient foundation solution for offshore wind turbines, but improving their uplift resistance in soft clay remains a practical challenge. Vacuum preloading has been an effective means to enhance soft clay engin...

(This article belongs to the Special Issue Marine Geohazards and Offshore Geotechnics)
  • Article
  • Open Access
11 Citations
2,952 Views
18 Pages

Finite-Element Modeling of the Dynamic Behavior of a Crack-like Defect in an Internally Pressurized Thin-Walled Steel Cylinder

  • Nurlan Zhangabay,
  • Ulzhan Ibraimova,
  • Marco Bonopera,
  • Ulanbator Suleimenov and ,
  • Konstantin Avramov,
  • Maryna Chernobryvko,
  • Akmaral Utelbayeva and
  • Borys Uspenskyi
  • + 3 authors+ 0 author

22 February 2024

This article presents one part of a study on the dynamic deformation and fracture of sections of steel gas pipelines with an external crack-like defect under the action of internal pressure. This work was performed on the basis of finite-element simu...

  • Article
  • Open Access
7 Citations
6,269 Views
28 Pages

Finite Element Simulations of an Elasto-Viscoplastic Model for Clay

  • Mohammad N. Islam,
  • Carthigesu T. Gnanendran and
  • Mehrdad Massoudi

In this paper, we develop an elasto-viscoplastic (EVP) model for clay using the non-associated flow rule. This is accomplished by using a modified form of the Perzyna’s overstressed EVP theory, the critical state soil mechanics, and the multi-s...

  • Article
  • Open Access
38 Citations
4,458 Views
11 Pages

1 May 2020

Wide bandgap (WBG) devices made from materials such as SiC, GaN, Ga2O3 and diamond, which can tolerate higher voltages and currents compared to silicon-based devices, are the most promising approach for reducing the size and weight of power managemen...

(This article belongs to the Section F: Electrical Engineering)
  • Article
  • Open Access
426 Views
22 Pages

20 September 2026

Temperature-induced variations in piezoelectric material properties can detune acoustic-logging transducers and alter their electrical, mechanical, and acoustic responses. This study establishes a temperature-dependent finite-element model of a tubul...

(This article belongs to the Collection Ultrasound Transducers)
  • Article
  • Open Access
9 Citations
3,592 Views
16 Pages

Selection of Constitutive Material Model for the Finite Element Simulation of Pressure-Assisted Single-Point Incremental Forming

  • Ali Abdelhafeez Hassan,
  • Gökhan Küçüktürk,
  • Hurcan Volkan Yazgin,
  • Hakan Gürün and
  • Duran Kaya

17 October 2022

Pressure-assisted single-point incremental forming (PA-SPIF) is one of the emerging forming techniques for sheet metals that have been the subject of rigorous research over the past two decades. Understanding of its forming mechanisms and capabilitie...

(This article belongs to the Special Issue High Performance and Hybrid Manufacturing Processes)
  • Article
  • Open Access
2 Citations
3,684 Views
23 Pages

3D Wavelet Finite-Element Modeling of Frequency-Domain Airborne EM Data Based on B-Spline Wavelet on the Interval Using Potentials

  • Lingqi Gao,
  • Changchun Yin,
  • Ning Wang,
  • Jiao Zhu and ,
  • Yunhe Liu,
  • Xiuyan Ren,
  • Bo Zhang and
  • Bin Xiong
  • + 3 authors+ 0 author

1 September 2021

We present a wavelet finite-element method (WFEM) based on B-spline wavelets on the interval (BSWI) for three-dimensional (3D) frequency-domain airborne EM modeling using a secondary coupled-potential formulation. The BSWI, which is constructed on th...

(This article belongs to the Special Issue Airborne Electromagnetic Surveys)
  • Article
  • Open Access
172 Views
19 Pages

Regularised Finite-Element Model Updating of a Thin-Walled Cylinder Based on Non-Contact Experimental Modal Analysis

  • Miaoshuo Li,
  • Yiming Ma,
  • Yupeng Xia,
  • Kaibo Lu and ,
  • Chan Xu,
  • Fengshou Gu and
  • Qiuxia Fan
  • + 2 authors+ 0 author

25 October 2026

Material removal changes the dynamics of thin-walled parts during machining, making an accurate pre-machining baseline essential for subsequent prediction. This study integrates non-contact testing, scan-based reconstruction and material-property upd...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
158 Views
35 Pages

17 October 2026

Fatigue-life prediction of flexible composite structures using finite element analysis can be affected by discrepancies between conventional fatigue-life models obtained from standard specimen tests and their application at the finite-element integra...

(This article belongs to the Special Issue Architected Lattice and Composite Materials: Multiscale Design, Manufacturing, and Applications)
  • Article
  • Open Access
30 Views
31 Pages

A Hybrid Spectral-Element and Finite-Element Framework for Three-Dimensional Full-Wave Seismoelectric Modeling in VTI Porous Media

  • Peiyue Liu,
  • Zhanghui An,
  • Yingying Fan,
  • Yi Lin and ,
  • Xiyu Cao and
  • Yangning Hou
  • + 1 author+ 0 author

9 November 2026

Assessing the contribution of electrokinetic effects to seismic electromagnetic signals requires forward methods capable of simulating coupled responses in anisotropic formations and complex geological models. We extend a three-dimensional hybrid spe...

(This article belongs to the Special Issue Advances and Applications of Geophysics)
  • Article
  • Open Access
20 Citations
5,931 Views
23 Pages

2 April 2019

We present a nonintrusive approach for combining high-fidelity simulations using Finite-Volume (FV) methods with Proper Orthogonal Decomposition (POD) and Galerkin Reduced-Order Modeling (ROM) methodology. By nonintrusive we here imply an approach th...

(This article belongs to the Special Issue Recent Advances in Aerodynamics of Wind Turbines)
  • Article
  • Open Access
12 Citations
4,372 Views
21 Pages

3 September 2021

The finite element method is a popular numerical method in engineering applications. However, there is not enough research about the finite element method in underwater sound propagation. The finite element method can achieve high accuracy and great...

(This article belongs to the Special Issue Modeling Techniques for Underwater Acoustic Scattering and Propagation (including 3D Effects))
  • Article
  • Open Access
846 Views
19 Pages

27 February 2026

The mechanisms driving the uplift and outward expansion of the Tibetan Plateau remain debated. The Qinghai Lake region at the plateau front, characterized by pronounced basin–range differential uplift, provides a key natural laboratory. Here, w...

(This article belongs to the Section Remote Sensing in Geology, Geomorphology and Hydrology)
  • Article
  • Open Access
12 Citations
3,953 Views
13 Pages

Mixed Generalized Multiscale Finite Element Method for Darcy-Forchheimer Model

  • Denis Spiridonov,
  • Jian Huang,
  • Maria Vasilyeva,
  • Yunqing Huang and
  • Eric T. Chung

10 December 2019

In this paper, the solution of the Darcy-Forchheimer model in high contrast heterogeneous media is studied. This problem is solved by a mixed finite element method (MFEM) on a fine grid (the reference solution), where the pressure is approximated by...

(This article belongs to the Special Issue Computational Mathematics, Algorithms, and Data Processing)
  • Article
  • Open Access
2 Citations
1,663 Views
27 Pages

Finite Element Model Updating of Axisymmetric Structures

  • Pavol Lengvarský,
  • Martin Hagara,
  • Lenka Hagarová and
  • Jaroslav Briančin

24 October 2025

Creating the most accurate numerical models with the same dynamic behavior as real structures plays an important role in the development process of various facilities. This article deals with the use of experimental methods, particularly experimental...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
2 Citations
1,476 Views
22 Pages

1 September 2025

Efficient and accurate forward modeling of electromagnetic fields is essential for advancing geophysical exploration in complex marine environments. However, realistic survey conditions characterized by low-frequency spectra, fine sedimentary strata,...

(This article belongs to the Special Issue Advances in Geophysical Exploration)
  • Article
  • Open Access
34 Citations
6,776 Views
15 Pages

An Automatic Generation Method of Finite Element Model Based on BIM and Ontology

  • Jing Jia,
  • Jieya Gao,
  • Weixin Wang,
  • Ling Ma and ,
  • Junda Li and
  • Zijing Zhang
  • + 1 author+ 0 author

11 November 2022

For the mechanical analysis work in the structural design phase, data conversion and information transfer between BIM model and finite element model have become the main factors limiting its efficiency and quality, with the development of BIM (buildi...

(This article belongs to the Special Issue Automation and Information and Knowledge Model Technologies in Construction Engineering)
  • Article
  • Open Access
18 Citations
4,594 Views
13 Pages

Analysis of the Static Behavior of a Single Tree on a Finite Element Model

  • Ľuboš Moravčík,
  • Radko Vincúr and
  • Zdenka Rózová

24 June 2021

This work deals with the innovated complex process of tree risk assessment, from precise geometrical tree shape acquisition to building and analyzing a finite element model under specified load. The acquisition of the 3D geometry of the tree was perf...

(This article belongs to the Section Plant Modeling)
  • Article
  • Open Access
15 Citations
2,649 Views
14 Pages

3 September 2022

This paper reveals the failure characteristic points of the spiral reinforced column during the damage process by modeling and analyzing the stressing state of the column with the test and finite element output data. At the same time, the structural...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access

30 September 2015

The prediction of surface temperature induced by frictional heating is of significance for evaluating the serious thermal wear, erosion and lubrication failure for industrial application and design. Temperature prediction model was established with t...

  • Review
  • Open Access
37 Citations
10,345 Views
30 Pages

Latest Advances in Finite Element Modelling and Model Updating of Cable-Stayed Bridges

  • Thomas Sharry,
  • Hong Guan,
  • Andy Nguyen,
  • Erwin Oh and
  • Nam Hoang

As important links in the transport infrastructure system, cable-stayed bridges are among the most popular candidates for implementing structural health monitoring (SHM) technology. The primary aim of SHM for these bridges is to ensure their structur...

(This article belongs to the Special Issue Structural Health Monitoring of Civil Infrastructures)
  • Article
  • Open Access
2 Citations
3,154 Views
20 Pages

31 October 2023

Computing backscattering of harmonic acoustic waves from underwater elastic targets of arbitrary shape is a problem of considerable practical significance. The finite element method is commonly applied to the discretization of the target; on the othe...

  • Article
  • Open Access
7 Citations
3,923 Views
14 Pages

31 August 2021

The optimization performed in this study is based on the finite dimensions model of the concentric ring electrode as opposed to the negligible dimensions model used in the past. This makes the optimization problem comprehensive, as all of the electro...

(This article belongs to the Special Issue Selected Papers from the 7th International Electronic Conference on Sensors and Applications)
  • Proceeding Paper
  • Open Access
2 Citations
3,883 Views
6 Pages

Finite Element Model of an Impact on a Palmar Pad from a Snowboard Wrist Protector

  • Chloe Newton-Mann,
  • Keith Winwood,
  • Heather Driscoll,
  • Nick Hamilton and
  • Tom Allen

Wrist injuries are the most common types of injury in snowboarding. Protectors can reduce injury risk by limiting wrist hyperextension and attenuating impact forces. There are a range of wrist protector concepts available, but it is unclear if any pa...

(This article belongs to the Proceedings of The 12th Conference of the International Sports Engineering Association)
  • Article
  • Open Access
25 Citations
6,798 Views
18 Pages

8 January 2018

It is difficult to establish a numerical model for a certain structure of electrospun nanofibrous mats, due to their high porosity and non-linear characteristics, that can fully consider these characteristics and describe their mechanical behaviors....

  • Article
  • Open Access
23 Citations
10,017 Views
26 Pages

5 February 2020

Simplified models are widely applied in finite element computations regarding mechanical and structural problems. However, the simplified model sometimes causes many deviations in the finite element analysis (FEA) of structures, especially in the non...

(This article belongs to the Section Engineering Remote Sensing)
  • Article
  • Open Access
6 Citations
2,024 Views
17 Pages

Finite Element Model Updating Method for Radio Telescope Antenna Based on Parameter Optimization with Surrogate Model

  • Shuo Wang,
  • Binbin Xiang,
  • Wei Wang,
  • Peiyuan Lian and ,
  • Yongqing Zhao,
  • Hanwei Cui,
  • Shangmin Lin and
  • Jianping Zhou
  • + 3 authors+ 0 author

27 June 2024

There are deviations between the radio telescope antenna finite element (FE) model, founded on the design stage, and the actual working antenna structure. The original FE model cannot accurately describe the antenna structure deformation characterist...

  • Article
  • Open Access
2 Citations
1,198 Views
18 Pages

Experiment and Calibration of Finite Element Parameters of Pineapple Based on Cohesive Zone Model

  • Dexuan Pan,
  • Fengguang He,
  • Qin Zhang,
  • Ganran Deng and ,
  • Guojie Li,
  • Zhende Cui,
  • Pinlan Chen and
  • Jiehao Li
  • + 3 authors+ 0 author

25 November 2025

In view of the lack of research on the extrusion of pineapple caused by the overall stress response of pineapple at the present stage of pineapple automatic harvesting, the finite element model of pineapples can be studied by constructing such a mode...

(This article belongs to the Section Agricultural Technology)
  • Article
  • Open Access
21 Citations
5,887 Views
17 Pages

Digital Induction Motor Model Based on the Finite Element Method

  • Pavol Bozek,
  • Tibor Krenicky and
  • Vanessa Prajova

20 April 2023

This article presents the design of a drive system for robots and manipulators, which is based on the finite element method of an induction motor. The design process involves constructing a computer-aided design (CAD) model of the induction motor, wh...

(This article belongs to the Special Issue Automation and Robotics: Latest Achievements, Challenges and Prospects, Volume 2)
  • Article
  • Open Access
19 Citations
30 Views

A heat and moisture transfer model for the clothed human body is developed based on the 3-D scanning data of the human body. The whole passive clothed human body system is subdivided into four sub- systems which are the tissue system, the circulatory...

  • Article
  • Open Access
5 Citations
2,424 Views
12 Pages

To build a representative 3D finite element model (FEM) for intracorneal ring segment (ICRS) implantation and to investigate localized optical changes induced by different ICRS geometries, a hyperelastic shell FEM was developed to compare the effect...

(This article belongs to the Special Issue Biomedical Imaging and Analysis of the Eye)
  • Article
  • Open Access
2,328 Views
13 Pages

Parametric Analysis of the Toothed Electromagnetic Spring Based on the Finite Element Model

  • Xiaoyuan Zheng,
  • Cheng Zhang,
  • Yifang Lou,
  • Guangming Xue and
  • Hongbai Bai

25 August 2023

Active vibration control shows excellent performance in vibration isolation. In this work, the finite element model of a toothed electromagnetic spring (TES) is established using ANSYS Maxwell software. Subsequently, a static characteristic experimen...

(This article belongs to the Special Issue Electro-Mechanical Actuators for Safety-Critical Aerospace Applications (2nd Edition))
  • Article
  • Open Access
6 Citations
2,784 Views
16 Pages

Application of Finite Element Method to Create a Digital Elevation Model

  • Eduardo Conde López,
  • Eduardo Salete Casino,
  • Jesús Flores Escribano and
  • Antonio Vargas Ureña

21 March 2023

The generation of a topographical surface or digital elevation model for a given set of points in space is a known problem in civil engineering and topography. In this article, we propose a simple and efficient way to obtain the terrain surface by us...

(This article belongs to the Section C1: Difference and Differential Equations)
  • Article
  • Open Access
4 Citations
1,652 Views
18 Pages

5 November 2024

In situ dynamic testing is conducted to study the dynamic characteristics of the wooden structure of the North House main hall. The velocity response signals on the measurement points are obtained and analyzed using the self-interaction spectral meth...

(This article belongs to the Special Issue Advances in Research on Structural Dynamics and Health Monitoring)
  • Article
  • Open Access
13 Citations
3,142 Views
23 Pages

28 August 2019

The chloride-induced corrosion of steel reinforcement embedded in concrete is undoubtedly one of the most important durability problems of reinforced concrete structures. The chloride ions as well as other ionic species (Na+, Ca2+, K+, OH−) com...

(This article belongs to the Special Issue Experimental Methods & Numerical Modelling for Composites and Nanomaterials)
  • Article
  • Open Access
12 Citations
3,217 Views
13 Pages

Numerical Assessment of the Structural Effects of Relative Sliding between Tissues in a Finite Element Model of the Foot

  • Marco A. Martínez Bocanegra,
  • Javier Bayod López,
  • Agustín Vidal-Lesso,
  • Andrés Mena Tobar and
  • Ricardo Becerro de Bengoa Vallejo

22 July 2021

Penetration and shared nodes between muscles, tendons and the plantar aponeurosis mesh elements in finite element models of the foot may cause inappropriate structural behavior of the tissues. Penetration between tissues caused using separate mesh wi...

(This article belongs to the Special Issue Numerical Simulation in Biomechanics and Biomedical Engineering)
  • Article
  • Open Access
2,263 Views
19 Pages

29 November 2023

In this article, two kinds of local and parallel stabilized finite element methods based upon two grid discretizations are proposed and investigated for the Stokes–Darcy model. The lowest equal-order finite element pairs (P1-P1-P1) are taken in...

(This article belongs to the Special Issue Advances in Computational and Applied Fluid Dynamics)
  • Article
  • Open Access
11 Citations
3,775 Views
20 Pages

16 May 2022

Circular and spherical particle models are a class of discrete elements (DEM) that have been increasingly applied to fracture studies of quasi-brittle materials, such as rock and concrete, due to their proven ability to simulate fracture processes th...

  • Article
  • Open Access
4 Citations
2,321 Views
29 Pages

Fast and Efficient Lunar Finite Element Gravity Model

  • Giaky Nguyen,
  • Ahmad Bani Younes and
  • Ahmed Atallah

11 November 2024

In this paper, the finite element method (FEM) is integrated with orthogonal polynomial approximation in high-dimensional spaces to innovatively model the Moon’s surface gravity anomaly. The aim is to approximate solutions to Laplace’s cl...

(This article belongs to the Section Aerospace Science and Engineering)
  • Article
  • Open Access
10 Citations
3,590 Views
15 Pages

3 January 2025

To establish a finite element model that accurately represents the dynamic characteristics of actual super high-rise building and improve the accuracy of the finite element simulation results, a finite element model updating method for super high-ris...

(This article belongs to the Special Issue Advanced Methodologies and Technologies in Structural Modelling, Identification and Monitoring of Existing Structures—2nd Edition)
  • Article
  • Open Access
7 Citations
3,390 Views
29 Pages

17 September 2025

This study investigates the application potential of large language models (LLMs), particularly GPT-4o, in generating geometric parameter suggestions during the early stages of structural design. Design recommendations from the LLM are validated usin...

(This article belongs to the Topic Artificial Intelligence Models, Tools and Applications)
  • Article
  • Open Access
585 Views
12 Pages

Finite element models of the mitral valve can be useful tools for physicians as a predictive tool for surgical planning, teaching, or observation. In order to seamlessly implement these tools in a clinical setting, the process for the creation of the...

(This article belongs to the Topic Mathematical Applications and Computational Intelligence in Medicine and Biology)
  • Article
  • Open Access
377 Views
18 Pages

Finite Element Model Updating Based on a Physics-Constrained Sparse Response Surface

  • Fang Dong,
  • Nan Jin,
  • Jun Ling,
  • Yue Liu and ,
  • Rumian Zhong and
  • Qingrui Yue
  • + 1 author+ 0 author

25 August 2026

Accurate finite element models are essential for structural condition assessment, yet nominal material properties and idealized boundary conditions can produce systematic discrepancies between numerical and measured dynamics. This study proposes a ph...

(This article belongs to the Section Building Structures)

of 364