Skip to Content

173 Results Found

  • Article
  • Open Access
7 Citations
3,028 Views
22 Pages

28 August 2023

In the cold rolling process, edge cracks, particularly those near the welded zone, can inadvertently lead to strip rupture. This study employed the extended finite element method (XFEM) to analyze the crack propagation behavior in welded strip steel...

  • Article
  • Open Access
108 Views
23 Pages

17 November 2026

The finite strip method is widely used for the buckling analysis of cold-formed steel sections. However, existing finite strip methods make it difficult to account for the effects of material nonlinearity and residual stresses on the buckling behavio...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
12 Citations
5,699 Views
13 Pages

26 January 2018

Limited by the deficiency of the finite element method (FEM) to deal with infinite domain problems, the traditional FEM rolling model is not suitable enough to study the effect of the complex internal stress of the incoming strip on hot rolling defor...

  • Article
  • Open Access
2 Citations
174 Views

This paper addresses a new finite strip method for the analysis of simultaneous heat conduction and thermal radiation in a planar slab with diffuse surfaces and filled with an absorbing and emitting material considered as a gray medium. The gray mate...

  • Feature Paper
  • Article
  • Open Access
2 Citations
3,586 Views
22 Pages

Integrated Finite Strip Computation for Modelling and Frequency Analysis of Hybrid Laminated FRP Structures

  • Hamidreza Naderian,
  • Moe M. S. Cheung,
  • Elena Dragomirescu and
  • Abdolmajid Mohammadian

This paper proposes an efficient numerical technique for simulating hybrid fiber-reinforced polymer (FRP) bridge systems. An integrated finite strip method (IFSM) is proposed to evaluate the free vibration performance of cable-stayed FRP bridges. The...

(This article belongs to the Special Issue Mathematical and Computational Modelling in Mechanics of Materials and Structures)
  • Article
  • Open Access
3,475 Views
23 Pages

27 March 2020

The finite volume method, based on the dynamic mesh method, is used to investigate the transient viscous incompressible flow around an impulsively and translationally started cylinder with strips. The strips of different shapes are installed at diffe...

(This article belongs to the Special Issue Computational Fluid Mechanics and Heat Transfer)
  • Article
  • Open Access
9 Citations
4,299 Views
20 Pages

29 September 2019

This study delineates a novel finite element model to consider a pattern of process parameters affecting the forward slip in micro flexible rolling, which focuses on the thickness transition area of the rolled strip with thickness in the micrometre r...

(This article belongs to the Special Issue Failure Mechanisms in Alloys)
  • Article
  • Open Access
24 Citations
6,347 Views
12 Pages

Edge-Drop Control Behavior for Silicon Strip Cold Rolling with a Sendzimir Mill

  • Hongbo Li,
  • Zhenwei Zhao,
  • Dawei Dong,
  • Guomin Han and ,
  • Jie Zhang,
  • Haichao Liu and
  • Xuechang You
  • + 2 authors+ 0 author

30 September 2018

Edge-drop control is important for silicon strip cold rolling, as the silicon strip is mainly used as a laminated core. Moreover, cold rolling is the key process for the thin strip edge-drop control, and a Sendzimir mill is one of the most popular co...

(This article belongs to the Special Issue 5th UK-China Steel Research Forum)
  • Article
  • Open Access
14 Citations
4,002 Views
25 Pages

Experimental Research and Numerical Analysis of CFRP Retrofitted Masonry Triplets under Shear Loading

  • Houria Hernoune,
  • Benchaa Benabed,
  • Rajab Abousnina,
  • Abdalrahman Alajmi and ,
  • Abdullah M GH Alfadhili and
  • Abdullah Shalwan
  • + 1 author+ 0 author

6 September 2022

This paper presents an experimental and numerical study into the shear response of brick masonry triplet prisms under different levels of precompression, as well as samples reinforced with carbon fiber-reinforced polymer (CFRP) strips. Masonry triple...

(This article belongs to the Special Issue Polymer Fiber and Nanowire Reinforced Materials)
  • Article
  • Open Access
14 Citations
3,272 Views
11 Pages

25 August 2022

Imaging detectors based on a microchannel plate (MCP) and charge division anode with charge induction have broad applications in particles (photons, neutrons, ions, and electrons) detection. However, the application of a charge induction readout mode...

(This article belongs to the Special Issue Advanced Optoelectronic Devices)
  • Article
  • Open Access
3 Citations
2,276 Views
15 Pages

26 December 2024

Seismic metamaterials are an emerging vibration-damping technology, yet concentrating the bandgap in the low-frequency range remains challenging due to the constraints imposed by lattice size. In this study, we numerically investigated seismic metama...

(This article belongs to the Section Inorganic Crystalline Materials)
  • Article
  • Open Access
11 Citations
5,001 Views
14 Pages

1 November 2022

This study presents a hybrid Artificial Intelligence-Finite Element Method (AI-FEM) predictive model to estimate the modulus of a subgrade reaction of a strip footing rested on a bi-layered profile. A parametric study was carried out using 2D Plaxis...

(This article belongs to the Topic Application of Big Data and Deep Learning in Engineering Analysis and Design)
  • Article
  • Open Access
2 Citations
4,362 Views
16 Pages

Complex edge stiffeners are widely used because of their superior performance over simple edge stiffeners in limiting flange buckling and improving local stability. However, most of the studies on complex edge stiffeners are qualitative. In this pape...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
3 Citations
3,270 Views
21 Pages

In recent years, cold-formed steel has been widely used in prefabricated steel structures, and the common cross-section forms are mainly complex lipped angle sections. However, there is a lack of design guidance for such a cross-section due to the co...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
2 Citations
1,627 Views
28 Pages

22 October 2025

To improve the efficiency and accuracy of steel surface defect detection while reducing computational complexity, this paper proposes a lightweight detection algorithm—Finite Element Method-YOLO (FEM-YOLO). The algorithm aims to enhance defect...

(This article belongs to the Special Issue Convolutional Neural Networks and Computer Vision)
  • Article
  • Open Access
13 Citations
5,729 Views
20 Pages

Numerical Study of the Behavior of Back-to-Back Mechanically Stabilized Earth Walls

  • Seyed Hamid Lajevardi,
  • Khashayar Malekmohammadi and
  • Daniel Dias

Back-to-back mechanically stabilized earth (MSE) walls can sustain significant loadings and deformations due to the interaction mechanisms which occur between the backfill material and reinforcement elements. These walls are commonly used in embankme...

(This article belongs to the Special Issue Fundamental Challenges for Civil Infrastructures in Problematic and Unsaturated Soils, Breakthroughs, and Opportunities)
  • Article
  • Open Access
16 Citations
9,947 Views
19 Pages

2 April 2015

In the thin sheet cold rolling manufacturing process, a major issue is roll elastic deformation and its impact on roll load, torque and contact stresses. As in many systems implying mechanical contact under high loading, a central part is under “stic...

(This article belongs to the Special Issue Numerical Simulation of Static and Dynamic Friction)
  • Article
  • Open Access
13 Citations
3,455 Views
30 Pages

19 February 2024

This research was conducted to investigate, experimentally, theoretically, and numerically, the use of CFRP materials for repairing a reinforced concrete one-way solid slab exposed to thermal shock. Nine slabs, measuring 1800 mm in length, 500 mm in...

(This article belongs to the Special Issue Fiber-Reinforced Polymers and Fiber-Reinforced Cement-Based Mortars in Repair/Strengthening Methods of Masonry and Reinforced Concrete Structural Members)
  • Article
  • Open Access
2 Citations
3,508 Views
14 Pages

28 April 2019

Based on unsteady airflow excitation and elastic thin strip vibration theory, a SI-FLAT flatness meter was taken as the research object, and an amplitude–residual stress simulation analysis model of the cold rolling strip under aerodynamic load...

(This article belongs to the Special Issue Researches and Simulations in Steel Rolling)
  • Article
  • Open Access
2 Citations
2,058 Views
15 Pages

Tensile Stress Evolution Outside Deformation Zone of Cold Rolled Strip

  • Kangwu Zhang,
  • Dongcheng Wang,
  • Yanghuan Xu and
  • Hongmin Liu

2 June 2023

To determine the exact distribution of tensile stress in a cold rolled strip, tensile stress evolution caused by lateral uneven velocity distribution outside the deformation zone of the strip is examined. The finite difference method is employed to s...

(This article belongs to the Special Issue Advanced Metal Forming and Smart Manufacturing Processes)
  • Article
  • Open Access
12 Citations
8,303 Views
20 Pages

17 March 2022

The laminar cooling process is an important procedure in hot steel strip rolling. The spatial distribution and the drop curve of the strip temperature are crucial for the production and the quality of the steel strip. Traditionally, lumped parameter...

  • Article
  • Open Access
21 Citations
5,117 Views
23 Pages

An Improved Approach to Direct Simulation of an Actual Almen Shot Peening Intensity Test with a Large Number of Shots

  • Chengyu Wang,
  • Weigang Li,
  • Jianjun Jiang,
  • Xin Chao and ,
  • Weikui Zeng,
  • Jiang Xu and
  • Jie Yang
  • + 2 authors+ 0 author

11 November 2020

In existing simulations of the Almen intensity test, arc height is indirectly obtained by an equivalent method including a representative cell, a few shots and equivalent loading. Most of these equivalent methods cannot consider the transverse deform...

(This article belongs to the Special Issue Advanced Design for Manufacturing Processes)
  • Article
  • Open Access
2 Citations
2,154 Views
17 Pages

The stability and deformation during trenching of ultra-deep diaphragm walls have a greater impact on the construction of diaphragm walls. The conventional limit equilibrium method, known as the vertical slices method, assumes homogeneity within the...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
1,273 Views
14 Pages

The Suppression of Spurious Modes in TC-SAW Resonators by the Application of Bent Metal Strips

  • Menghui Li,
  • Mengke Qi,
  • Yuanhang Chen,
  • Yimin Cheng and ,
  • Liang Cao,
  • Hong Zhou and
  • Xiaojing Mu
  • + 2 authors+ 0 author

13 November 2025

This article investigates the use of bent metal strips on the top of a SiO2 layer for the suppression of spurious modes in temperature-compensated surface acoustic wave (TC-SAW) resonators employing a SiO2/Cu/128°YX-LiNbO3 structure. The proposed...

(This article belongs to the Special Issue Exploring the Sensing Potential of Acoustic Wave Devices)
  • Article
  • Open Access
5 Citations
2,439 Views
11 Pages

Research on Strip Profile Control Characteristics of 1500 mm Quintic CVC Mill

  • Bangshuo Wei,
  • Hongbo Li,
  • Yuchao Wang,
  • Jie Zhang and ,
  • Ning Kong,
  • Zhang Liu and
  • Bo Liu
  • + 2 authors+ 0 author

24 February 2023

Compared with cubic Continuously Variable Crown (CVC), quintic CVC presents integrated control capability of quadratic and quartic crown. In order to take full advantage of quintic CVC and have better comprehensive control of the edge wave, center wa...

  • Article
  • Open Access
21 Citations
5,970 Views
17 Pages

A Numerical Study of Spray Strips Analysis on Fridsma Hull Form

  • Samuel,
  • Andi Trimulyono,
  • Parlindungan Manik and
  • Deddy Chrismianto

22 November 2021

Spray strips are deflectors added to the hull to reduce the Wetted Surface Area (WSA). The reduced WSA will decrease the total ship drag caused by the deflection of the spray strip installation. The research aimed to predict the function of the spray...

(This article belongs to the Section Mathematical and Computational Fluid Mechanics)
  • Article
  • Open Access
34 Citations
4,774 Views
9 Pages

Nanostrip-Induced High Tunability Multipolar Fano Resonances in a Au Ring-Strip Nanosystem

  • Zao Yi,
  • Xin Li,
  • Xibin Xu,
  • Xifang Chen and ,
  • Xin Ye,
  • Yong Yi,
  • Tao Duan,
  • Yongjian Tang,
  • Jiangwei Liu and
  • Yougen Yi
  • + 5 authors+ 0 author

Surface plasmon resonances of a Au ring-strip nanosystem with tunable multipolar Fano resonances have been investigated based on the finite-difference time-domain (FDTD) method. Abundant plasmon properties of a Au ring-strip nanosystem can be obtaine...

(This article belongs to the Special Issue Metallic Nanostructures)
  • Article
  • Open Access
14 Citations
4,194 Views
16 Pages

Development of a Numerical Model to Simulate Laser-Shock Paint Stripping on Aluminum Substrates

  • Konstantinos Tserpes,
  • Kosmas Papadopoulos,
  • Selen Unaldi and
  • Laurent Berthe

24 August 2021

An explicit 3D Finite Element (FE) model was developed in the LS-Dyna code to simulate the laser shock paint stripping on aircraft aluminum substrates. The main objective of the model is to explain the physical mechanisms of the laser shock stripping...

  • Article
  • Open Access
6 Citations
2,876 Views
22 Pages

Stability Loss Analysis for Thin-Walled Shells with Elliptical Cross-Sectional Area

  • Ján Kostka,
  • Jozef Bocko,
  • Peter Frankovský,
  • Ingrid Delyová and ,
  • Tomáš Kula and
  • Patrik Varga
  • + 1 author+ 0 author

28 September 2021

The aim of the scientific contribution is to point out the possibility of applicability of cylindrical shells with a constant elliptical cross-sectional shape for stability loss analysis. The solution to the problem consists of two approaches. The fi...

(This article belongs to the Special Issue Manufacturing and Mechanics of Materials)
  • Communication
  • Open Access
9 Citations
4,224 Views
13 Pages

10 March 2023

This paper investigated the force-frequency characteristics of AT-cut strip quartz crystal resonator (QCR) employing finite element analysis methods and experiments. We used the finite element analysis software COMSOL Multiphysics to calculate the st...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
7 Citations
3,910 Views
20 Pages

17 February 2023

The use of carbon-fiber-reinforced polymers (CFRPs) for the repair and rehabilitation of reinforced concrete (RC) structures has been receiving a lot of attention. Specifically, the shear strengthening of RC members based on CFRP materials has been t...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
1 Citations
1,615 Views
16 Pages

18 April 2025

In order to reduce the edge waves and defects of the strip in the forming process and obtain better properties of the strip, it is urgent to establish a better flexible cold forming process. In this paper, a finite element model of the production lin...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: “Welding and Joining”)
  • Article
  • Open Access
6 Citations
1,872 Views
11 Pages

21 February 2023

In order to solve the problem of wide magnesium strip uneven deformation in electroplastic rolling, an uneven field measurement device was designed. The device simulates the actual electro-thermal characteristics and provides as even and constant fie...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
2 Citations
2,162 Views
10 Pages

Design and Analysis of Photon Imaging Detector Based on Printed Circult Board Technology Cross Strip Anode

  • Jinyao Duan,
  • Jinkun Zheng,
  • Yang Yang,
  • Yuchao Song and ,
  • Anpeng La and
  • Yonglin Bai
  • + 1 author+ 0 author

14 November 2023

Detectors with cross strip (XS) anodes have high application value in deep space exploration, quantum communications, space astronomical telescopes, etc. In this article, a single-layer XS anode based on Printed Circult Board (PCB) technology is prop...

  • Article
  • Open Access
9 Citations
2,863 Views
14 Pages

14 July 2023

In response to the localized corrosion generated by underground casing, which seriously affects the safe operation of salt cavern compressed air storage, we used commercial finite element software, ANSYS, to propose a partial model applicable to casi...

(This article belongs to the Special Issue Advances in the Utilization of Underground Energy and Space)
  • Article
  • Open Access
434 Views
15 Pages

Dispersion and Directional Attenuation in Periodic Acoustic-Black-Hole Plates

  • Ahmed Mehrem,
  • María Campo-Valera,
  • Luisa Euler,
  • Lutz Staemmler and
  • Rafael Asorey-Cacheda

15 August 2026

This work investigates how unit-cell topology controls flexural-wave dispersion and finite-array attenuation in periodic acoustic-black-hole (ABH) plates. Six configurations are compared under identical material constants, lattice parameter, power-la...

(This article belongs to the Section Acoustics and Vibrations)
  • Article
  • Open Access
7 Citations
2,741 Views
24 Pages

Structural Response of Bonded Joints between FRP Composite Strips and Steel Plates

  • Vlad Lupășteanu,
  • Dragoș Ungureanu,
  • Nicolae Țăranu,
  • Dorina Nicolina Isopescu and ,
  • Radu Lupășteanu and
  • Petru Mihai
  • + 1 author+ 0 author

8 November 2021

This paper presents the outcomes of an experimental and numerical study performed on epoxy-bonded single lap joints (SLJs) between carbon fiber-reinforced polymer (CFRP) composite strips and steel elements. For the experimental program, 34 specimens...

(This article belongs to the Special Issue Advanced Materials for Multifunctional Applications)
  • Feature Paper
  • Article
  • Open Access
4 Citations
6,077 Views
18 Pages

25 May 2018

This paper discusses the physical nature and the numerical modeling of a novel approach of periodic structures for applications as photonic sensors. The sensing is based on the high sensitivity to the cover index change of the notch wavelength. This...

(This article belongs to the Special Issue Optical Waveguide Based Sensors)
  • Article
  • Open Access
1 Citations
815 Views
18 Pages

Effect of Equipment Gap on Longitudinal Stiffness of Hot Strip Rolling Mill Based on Finite Element Simulation

  • Xiangyun Kong,
  • Lei Huang,
  • Jie Zhou,
  • Hainan He and ,
  • Dong Xu,
  • Bingji Li,
  • Pei Yan,
  • Xiaochen Wang,
  • Quan Yang and
  • Yuchun Xu
  • + 6 authors+ 1 author

10 April 2026

Equipment wear and assembly clearances can change the longitudinal stiffness of hot strip mills and further affect roll-gap levelling accuracy and asymmetric strip profile control. In this study, the longitudinal stiffness of a 1580 mm four-high hot...

(This article belongs to the Special Issue Industrial IoT-Enabled Modeling and Optimization for the Process Industry—2nd Edition)
  • Article
  • Open Access
4 Citations
2,353 Views
15 Pages

23 September 2022

Vibration is a common and urgent technical issue in the steel industry. The world’s first multi-mode continuous-casting and rolling plant of Shou Gang Jing Tang Iron and Steel Co., Ltd. (Tangshan, China), has a finishing mill, F3, that experien...

  • Article
  • Open Access
1 Citations
2,005 Views
11 Pages

Optical Path Design of an Integrated Cavity Optomechanical Accelerometer with Strip Waveguides

  • Chengwei Xian,
  • Pengju Kuang,
  • Zhe Li,
  • Yi Zhang and ,
  • Changsong Wang,
  • Rudi Zhou,
  • Guangjun Wen,
  • Yongjun Huang and
  • Boyu Fan
  • + 4 authors+ 0 author

To improve the efficiency and stability of the system, this paper proposes a monolithic integrated optical path design for a cavity optomechanical accelerometer based on a 250 nm top silicon thickness silicon-on-insulator (SOI) wafer instead of reado...

(This article belongs to the Special Issue Emerging Trends in Spectral Analysis with Optical Sensors: Modern Approaches and Applications)
  • Article
  • Open Access
8 Citations
2,810 Views
14 Pages

The Restored Premolars Biomechanical Behavior: FEM and Experimental Moiré Analyses

  • Jose Luis Valin Rivera,
  • Edison Gonçalves,
  • Paulo Vinicius Soares,
  • Giovana Milito and ,
  • Jorge Octavio Ricardo Perez,
  • Guillermo Francisco Palacios Roque,
  • Meylí Valin Fernández,
  • Henry Figueredo Losada,
  • Fabrícia Araújo Pereira and
  • Alexander Rodriguez Soto
  • + 6 authors+ 1 author

4 July 2022

This study applied the finite element method (FEM) and the moiré strip projection method to evaluate the biomechanical behavior of healthy and endodontic-treated premolar teeth. The finite element method and the moiré strip projection m...

(This article belongs to the Topic Advances in Non-Destructive Testing Methods)
  • Article
  • Open Access
58 Citations
13,342 Views
18 Pages

6 January 2014

This paper presents a study on the load carrying capacity of reinforced concrete (RC) beams strengthened with externally bonded (EB) carbon fiber reinforced polymer (CFRP) strips prestressed up to 0.6% in strain. At the strip ends, the innovative gra...

(This article belongs to the Special Issue Selected Papers from "SMAR 2013")
  • Article
  • Open Access
13 Citations
4,043 Views
22 Pages

Cyclic Loading Performance of Radius-Cut Double Coke-Shaped Strip Dampers

  • Jaehoon Bae,
  • Chang-Hwan Lee,
  • Minjae Park,
  • Robel Wondimu Alemayehu and ,
  • Jaeho Ryu,
  • Youngsik Kim and
  • Young K. Ju
  • + 2 authors+ 0 author

4 September 2020

Conventional slit dampers are widely used for the purpose of seismic retrofitting, however, the structure of these dampers is susceptible to fractures, due to stress concentration at the ends of the strips in the event of large earthquakes. To addres...

(This article belongs to the Special Issue Novel High-Performance Building Materials and Structures)
  • Article
  • Open Access
2 Citations
3,115 Views
17 Pages

A structure optimized method based on the artificial fish swarm algorithm (AFSA) for the soft magnetic strips of the inner double-layer shield is proposed in this paper and applied to the coupler of the wireless power transfer (WPT) system of an elec...

(This article belongs to the Special Issue Intelligent Modeling and Simulation Technology of E-Mobility)
  • Article
  • Open Access
24 Citations
5,556 Views
13 Pages

Touch Locating and Stretch Sensing Studies of Conductive Hydrogels with Applications to Soft Robots

  • Yanmin Zhou,
  • Bin He,
  • Zhe Yan,
  • Yinghui Shang and ,
  • Qigang Wang and
  • Zhipeng Wang
  • + 1 author+ 0 author

13 February 2018

Soft robots possess great potential in environmental adaptations, while their environmental sensing abilities are critical. Conductive hydrogels have been suggested to possess sensing abilities. However, their application in soft robots is lacking. I...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
26 Citations
3,931 Views
14 Pages

24 July 2021

This paper presents a finite element (FE) analysis for predicting the flexural behavior of reinforced concrete (RC) beams strengthened with Fe-based shape memory alloy (Fe-SMA) strips using a near surface mounted (NSM) method. Experimental results re...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
1,324 Views
11 Pages

18 June 2025

The shear strength of a steel shear wall (SSW) is typically governed by the yield strength of the steel. However, changes in mechanical properties beyond yielding—particularly those related to steel hardening and the effects of gravity loads&md...

(This article belongs to the Special Issue Advances in Steel and Composite Structures)
  • Article
  • Open Access
15 Citations
2,205 Views
17 Pages

Analysis of Varying Temperature Regimes in a Conductive Strip during Induction Heating under a Quasi-Steady Electromagnetic Field

  • Roman Musii,
  • Marek Lis,
  • Petro Pukach,
  • Andriy Chaban and ,
  • Andrzej Szafraniec,
  • Myroslava Vovk and
  • Nataliia Melnyk
  • + 2 authors+ 0 author

11 January 2024

Transition processes in a steel conductive strip are analyzed during its induction heating under a quasi-steady electromagnetic field. In particular, the temperature field in the strip is studied. A method of solving corresponding initial boundary pr...

(This article belongs to the Section J2: Thermodynamics)
  • Article
  • Open Access
7 Citations
2,992 Views
14 Pages

Vibration Energy Coupling Behavior of Rolling Mills under Double Disturbance Conditions

  • Lidong Wang,
  • Shen Wang,
  • Xingdou Jia,
  • Xiaoling Wang and
  • Xiaoqiang Yan

20 February 2023

The operation of the world’s first multimode continuous casting and rolling F3 (3rd finishing mill stand) finishing mill was hampered by frequent vibrations. Mill vibrations were found to be caused by the transmission and coupling of vibration...

of 4