Skip to Content

415 Results Found

  • Article
  • Open Access
2 Citations
3,256 Views
14 Pages

Boiling Flow Pattern Identification Using a Self-Organizing Map

  • Iwona Zaborowska,
  • Hubert Grzybowski and
  • Romuald Mosdorf

17 April 2020

In the paper, a self-organizing map combined with the recurrence quantification analysis was used to identify flow boiling patterns in a circular horizontal minichannel with an inner diameter of 1 mm. The dynamics of the pressure drop during density-...

(This article belongs to the Special Issue Heat and Mass Transfer in Intense Liquid Evaporation)
  • Article
  • Open Access
11 Citations
3,772 Views
11 Pages

Heat Transfer of Water Flow Boiling in Nanostructured Open Microchannels

  • Liaofei Yin,
  • Zhonglin Yang,
  • Kexin Zhang,
  • Yingli Xue and
  • Chao Dang

26 January 2023

In recent years, the open microchannel has drawn increasing interest, but severe local dryout limited the heat transfer capability of flow boiling. It was anticipated that nanostructures with exceptional capillary wicking abilities would overcome thi...

(This article belongs to the Section J: Thermal Management)
  • Feature Paper
  • Review
  • Open Access
16 Citations
5,448 Views
29 Pages

A Review on Flow Boiling Enhancement on Textured Surfaces

  • Frederik Mertens,
  • Sylvie Castagne and
  • Maria Rosaria Vetrano

23 January 2024

It is widely established that flow boiling, being a direct cooling technique also employing the latent heat of the fluid, has the potential to be more efficient than being useful in single-phase conventional cooling methods. This results in considera...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
3 Citations
3,762 Views
18 Pages

Entropy Generation Analysis of the Flow Boiling in Microgravity Field

  • Zijian Sun,
  • Haochun Zhang,
  • Qi Wang and
  • Wenbo Sun

18 April 2022

Entropy generation analysis of the flow boiling in microgravity field is conducted in this paper. A new entropy generation model based on the flow pattern and the phase change process is developed in this study. The velocity ranges from 1 m/s to 4 m/...

(This article belongs to the Special Issue Entropy in Computational Fluid Dynamics III)
  • Article
  • Open Access
2,669 Views
28 Pages

13 December 2023

Microchannel flow boiling is an efficient cooling method for high-heat-flux electronic devices. To understand the flow boiling regime in a T-shaped microchannel, this paper prepared T-shaped microchannels of different sizes and designed an experiment...

(This article belongs to the Special Issue Heat Transfer and Fluid Flow in Microstructures)
  • Article
  • Open Access
5 Citations
5,327 Views
14 Pages

Flow Boiling Heat Transfer Performance and Boiling Phenomena on Various Straight Fin Configurations

  • Indro Pranoto,
  • Muhammad Aulia Rahman,
  • Cahya Dhika Wicaksana,
  • Alan Eksi Wibisono and ,
  • Fauzun and
  • Arif Widyatama
  • + 1 author+ 0 author

20 March 2023

The trend of miniaturisation in recent decades has led to the development of compact electronic devices. The reduction in the required dimension leads to the exponential rise in the heat flux dissipated from such a system. A proper thermal management...

(This article belongs to the Topic Applied Heat Transfer)
  • Abstract
  • Open Access
2 Citations
1,699 Views
3 Pages

This paper reports, for the first time, on the use of thin-film platinum microheaters to influence the flow boiling of DI water in microchannels with rapid low power heating pulses. A custom-designed control module allows microheaters to be actuated...

(This article belongs to the Proceedings of XXXV EUROSENSORS Conference)
  • Article
  • Open Access
27 Citations
4,664 Views
22 Pages

Modeling of Subcooled Flow Boiling with Nanoparticles under the Influence of a Magnetic Field

  • Mohammad Yaghoub Abdollahzadeh Jamalabadi,
  • Milad Ghasemi,
  • Rezvan Alamian,
  • Somchai Wongwises and ,
  • Masoud Afrand and
  • Mostafa Safdari Shadloo
  • + 1 author+ 0 author

11 October 2019

Subcooled flow boiling is one of the major issues in the nuclear and power generation industries. If the fluid inlet temperature in the boiling area is less than the boiling temperature, the boiling process is called subcooled boiling. The symmetry o...

(This article belongs to the Special Issue Future and Prospects in Non-Newtonian and Nanofluids)
  • Article
  • Open Access
3 Citations
3,007 Views
27 Pages

Heat Transfer Model Based on Flow Pattern during Flow Boiling in Rectangular Microchannels

  • Jiamin Zhu,
  • Peng Zhang,
  • Sicong Tan,
  • Tao Wang and ,
  • Chaohong Guo and
  • Yuyan Jiang
  • + 1 author+ 0 author

6 September 2024

In thermal management applications using two-phase flow boiling, rectangular microchannels hold significant promise due to their ease of manufacturing and effective heat transfer characteristics. In this work, we combined experimental and theoretical...

(This article belongs to the Special Issue Aerospace Human–Machine and Environmental Control Engineering)
  • Article
  • Open Access
28 Citations
5,514 Views
15 Pages

Effect of Functional Surfaces with Gradient Mixed Wettability on Flow Boiling in a High Aspect Ratio Microchannel

  • Vahid Ebrahimpour Ahmadi,
  • Akam Aboubakri,
  • Abdolali Khalili Sadaghiani,
  • Khellil Sefiane and
  • Ali Koşar

10 December 2020

Flow boiling is one of the most effective phase-change heat transfer mechanisms and is strongly dependent on surface properties. The surface wettability is a crucial parameter, which has a considerable effect on the heat transfer performance, particu...

(This article belongs to the Special Issue Recent Advances in Single and Multiphase Flows in Microchannels)
  • Article
  • Open Access
14 Citations
6,919 Views
14 Pages

17 August 2018

Microchannel flow boiling is a cooling method studied in microscale heat-cooling, which has become an important field of research with the development of high-density integrated circuits. The change in microchannel surface characteristics affects the...

(This article belongs to the Special Issue Superhydrophobic Coatings)
  • Article
  • Open Access
5 Citations
2,763 Views
17 Pages

Numerical Study of Flow Boiling of ADN-Based Liquid Propellant in a Capillary

  • Xuhui Liu,
  • Gaoshi Su,
  • Zhaopu Yao,
  • Zhuan Yan and
  • Yusong Yu

24 February 2023

During the operation of ADN (ammonium dinitramide, (NH4+N(NO2)2−))-based thrusters, the ADN-based liquid propellant, a non-toxic green energetic material, tends to flow boil in the capillary tube due to heat transfer from the wall. A three-dime...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
1 Citations
2,445 Views
23 Pages

18 September 2025

To date, two-phase flow boiling has been extensively investigated for various working fluids and geometries, mainly under operating pressures and mass fluxes in the range of medium to high. However, very limited studies have been conducted, focusing...

  • Article
  • Open Access
2 Citations
2,329 Views
26 Pages

Numerical Study of the Effect of the Rolling Motion on the Subcooled Flow Boiling in the Subchannel

  • Yaru Li,
  • Xiangyu Chi,
  • Zezhao Nan,
  • Xuan Yin and ,
  • Xiaohan Ren and
  • Naihua Wang
  • + 1 author+ 0 author

2 July 2022

The marine environment may change the force on the fluid and inevitably influence bubble behavior and the two-phase flow in the reactor core, which are vital to the safety margin of a nuclear reactor. To explore the effect of the marine motion on the...

(This article belongs to the Special Issue Advanced Propulsion System and Thermal Management Technology)
  • Article
  • Open Access
2 Citations
3,033 Views
29 Pages

5 August 2023

Amidst the background of “double carbon”, energy saving and emission reduction is a popular direction in the current refrigeration industry. Therefore, the research on the boiling heat transfer of gas–liquid two-phase flow is helpfu...

(This article belongs to the Section Chemical Processes and Systems)
  • Feature Paper
  • Article
  • Open Access
12 Citations
4,045 Views
26 Pages

26 September 2022

The process with change of phase during flow in mini-channels plays a significant role in many industrial applications, such as microelectronics. Furthermore, methods for heat transfer intensification during flow in channels of small cross-section ar...

(This article belongs to the Special Issue Heat and Mass Transfer Issues in Mini Gaps)
  • Article
  • Open Access
26 Citations
5,951 Views
25 Pages

Flow Boiling Heat Transfer Characteristics in Horizontal, Three-Dimensional Enhanced Tubes

  • Zhi-Chuan Sun,
  • Xiang Ma,
  • Lian-Xiang Ma,
  • Wei Li and
  • David J. Kukulka

10 March 2019

An experimental investigation was conducted to explore the flow boiling heat transfer characteristics of refrigerants R134A and R410A inside a smooth tube, as well as inside two newly developed surface-enhanced tubes. The internal surface structures...

(This article belongs to the Special Issue Selected Papers from PRES 2018: The 21st Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction)
  • Article
  • Open Access
1 Citations
1,516 Views
20 Pages

Flow Boiling in Microchannels Coupled with Surfaces Structured with Microcavities

  • Pedro Pontes,
  • Vicente Andrade,
  • Mariana Perez and
  • Ana S. Moita

16 September 2025

This study addresses the characterization of two-phase flow phenomena in a microchannel heat sink designed to cool high-concentration photovoltaic cells. Two-phase flows can introduce instabilities that affect heat exchange efficiency, a challenge in...

  • Article
  • Open Access
8 Citations
4,967 Views
22 Pages

Liquid Nitrogen Flow Boiling Critical Heat Flux in Additively Manufactured Cooling Channels

  • Debra Ortega,
  • Alejandro Amador,
  • Mohiuddin Ahmad,
  • Ahsan Choudhuri and
  • Md Mahamudur Rahman

This paper presents an experimental characterization of liquid nitrogen (LN2) flow boiling in additively manufactured minichannels. There is a pressing need of concerted efforts from the space exploration and thermal transport communities to design h...

(This article belongs to the Special Issue Heat Transfer, Combustion and Flow Dynamics in Propulsion Systems)
  • Review
  • Open Access
8 Citations
4,813 Views
21 Pages

10 August 2023

This study will present a comprehensive review of the two-phase flow boiling heat transfer coefficient of hydrocarbons such as propane (R-290), butane (R-600), iso-butane (R-600a), and ethanol at various experimental conditions. Studying the multipha...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
9 Citations
3,373 Views
23 Pages

12 October 2022

This study presents an extensive evaluation of heat transfer characteristics, flow patterns, and pressure drop for saturation pressures ranging from 460–660 kPa in a horizontal smooth tube of 5 mm internal diameter using R134a as the working fl...

(This article belongs to the Special Issue Heat Transfer Characteristics and Two-Phase Flow Performance)
  • Article
  • Open Access
6 Citations
3,213 Views
35 Pages

23 August 2024

The precise design of heat exchangers in automobile air conditioning systems for more sustainable electric vehicles requires an enhanced assessment of CFD mechanistic models for the subcooled boiling flow of pure eco-friendly refrigerant. Computation...

(This article belongs to the Collection Advances in Heat Transfer Enhancement)
  • Article
  • Open Access
8 Citations
3,178 Views
22 Pages

1 April 2024

Interconnected microchannels (IMCs) in flow boiling have the advantages of optimized heat transfer performance, energy savings and high efficiency, compact size, and strong customizability. They provide new solutions for thermal management and heat t...

(This article belongs to the Section J: Thermal Management)
  • Communication
  • Open Access
4 Citations
4,035 Views
9 Pages

2D Model of Transfer Processes for Water Boiling Flow in Microchannel

  • Valery A. Danilov,
  • Christian Hofmann and
  • Gunther Kolb

The modeling of transfer processes is a step in the generalization and interpretation of experimental data on heat transfer. The developed two-dimensional model is based on a homogeneous mixture model for boiling water flow in a microchannel with a n...

(This article belongs to the Special Issue Feature Papers in Chemical Engineering)
  • Article
  • Open Access
5 Citations
3,213 Views
12 Pages

17 March 2022

Subcooled flow boiling was experimentally investigated in a horizontal annulus with a temperature-controlled boiling surface and transparent outer pipe facilitating visualization. Boiling occurs on a copper tube with a diameter of 12 mm in an annulus...

(This article belongs to the Special Issue Enhanced Two-Phase Heat Transfer)
  • Article
  • Open Access
6 Citations
4,464 Views
17 Pages

CFD Analysis of Subcooled Flow Boiling in 4 × 4 Rod Bundle

  • Ye-Bon Seo,
  • SalaiSargunan S Paramanantham,
  • Jin-Yeong Bak,
  • Byongjo Yun and
  • Warn-Gyu Park

30 June 2020

Rod bundle flow is an important research field related to reactor cooling in nuclear power plants. Owing to the rapid development of computerized performance assessments, interest in coolant flow analysis using computational fluid dynamics has garner...

(This article belongs to the Special Issue Experimental and Numerical Modeling of Fluid Flow)
  • Article
  • Open Access
10 Citations
4,569 Views
21 Pages

Flow Boiling of Low-Pressure Water in Microchannels of Large Aspect Ratio

  • Liang Chen,
  • Xingchen Li,
  • Runfeng Xiao,
  • Kunpeng Lv and ,
  • Xue Yang and
  • Yu Hou
  • + 1 author+ 0 author

27 May 2020

Flow boiling heat transfer in microchannels can provide a high cooling rate, while maintaining a uniform wall temperature, which has been extensively studied as an attractive solution for the thermal management of high-power electronics. The depth-to...

(This article belongs to the Special Issue Engineering Modeling of Advanced Heat Transfer Problems)
  • Article
  • Open Access
3 Citations
4,054 Views
13 Pages

X-ray Imaging-Based Void Fraction Measurement in Saturated Flow Boiling Experiments with Seawater Coolant

  • Seth Eckels,
  • Zayed Ahmed,
  • Molly Ross,
  • Daniel Franken and ,
  • Steven Eckels and
  • Hitesh Bindra
  • + 1 author+ 0 author

Recent studies have shown that the presence of dissolved salts in water can exhibit peculiar flow boiling and two-phase flow regimes. Two-phase flow and convective flow boiling are typically characterized with the help of void fraction measurements....

(This article belongs to the Special Issue X Rays: Physics and Applications)
  • Article
  • Open Access
15 Citations
4,445 Views
27 Pages

25 January 2022

Evaporators used in organic Rankine cycles (ORC) are designed using existing flow boiling correlations that are mainly based on HVAC&R data. However, the ORC evaporators employed in the industry typically have larger diameters and operational con...

(This article belongs to the Special Issue Two-Phase Flow with Boiling Heat Transfer)
  • Article
  • Open Access
7 Citations
3,635 Views
26 Pages

21 January 2025

Flow boiling heat transfer in micro-channels under hypergravity conditions is a crucial research area for developing efficient cooling systems in aerospace applications. This experimental study investigated the flow boiling heat transfer characterist...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
3 Citations
3,773 Views
15 Pages

19 June 2019

The control of heated fluid is of interest in many fields of engineering, such as boiler and heat exchanger design. The broken symmetry of a thermo-physical system within a multi-sized media could be used to control its physical characteristics. In t...

(This article belongs to the Special Issue Future and Prospects in Non-Newtonian and Nanofluids)
  • Article
  • Open Access
4 Citations
3,283 Views
17 Pages

28 August 2022

A three-dimensional numerical model is established to study the flow boiling heat transfer characteristics of the liquid film in a rotating pipe, and the effectiveness of the model is verified by a comparison between the numerical results and the exp...

(This article belongs to the Special Issue Heat and Cold Storage for a Net-Zero Future)
  • Article
  • Open Access
7 Citations
4,800 Views
20 Pages

An Overall Bubble Diameter Model for the Flow Boiling and Numerical Analysis through Global Information Searching

  • Zhexuan Xu,
  • Junhong Zhang,
  • Jiewei Lin,
  • Tianshu Xu and ,
  • Jingchao Wang and
  • Zefeng Lin
  • + 1 author+ 0 author

19 May 2018

Bubble diameter is important for the three-dimensional nucleate boiling two-phase flow simulation. However, the bubble diameter is rarely considered as a variable because it is difficult to estimate. In this paper, a novel bubble diameter model is pr...

  • Article
  • Open Access
6 Citations
3,011 Views
18 Pages

Flow Boiling Heat Transfer; Experimental Study of Hydrocarbon Based Nanorefrigerant in a Vertical Tube

  • Marta Hernaiz,
  • Iker Elexpe,
  • Estibaliz Aranzabe and
  • Andrés T. Aguayo

1 August 2023

Flow boiling is a complex process but very efficient for thermal management in different sectors; enhancing flow boiling heat transfer properties is a research field of great interest. This study proposes the use of various nanomaterials, carbon-base...

(This article belongs to the Special Issue Thermal Properties and Features of Nanofluids)
  • Article
  • Open Access
14 Citations
3,378 Views
15 Pages

24 May 2024

The aim of this article is to introduce a novel approach to identifying flow regimes and void fractions in microchannel flow boiling, which is based on binary image segmentation using digital image processing and deep learning. The proposed image pro...

(This article belongs to the Section Chemical Sensors)
  • Article
  • Open Access
13 Citations
3,654 Views
20 Pages

21 November 2022

Flow boiling in microchannels is one of the promising techniques for heat dissipation occurred in micro devices. However, the rapid bubble growth must be suppressed, which leads to serious boiling instabilities, high pressure drop, and low heat trans...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
2 Citations
2,340 Views
25 Pages

23 May 2025

The escalating thermal demands of high-power electronic devices and energy systems necessitate advanced thermal management solutions. Flow boiling in small/micro channels has emerged as a promising approach, yet its practical implementation is hinder...

(This article belongs to the Special Issue Hydrodynamics Science Experiments and Simulations, 2nd Edition)
  • Article
  • Open Access
1 Citations
3,478 Views
35 Pages

20 May 2022

In the top submerged lance (TSL) smelting process, flow boiling may occur in the lance’s inner pipe due to the heat coming from the furnace when liquid fuel is adopted. In the current study, a numerical simulation was carried out by coupling the Eule...

  • Article
  • Open Access
8 Citations
3,584 Views
11 Pages

Subcooled Flow Boiling Heat Flux Enhancement Using High Porosity Sintered Fiber

  • Edgar Santiago Galicia,
  • Yusuke Otomo,
  • Toshihiko Saiwai,
  • Kenji Takita and ,
  • Kenji Orito and
  • Koji Enoki
  • + 1 author+ 0 author

24 June 2021

Passive methods to increase the heat flux on the subcooled flow boiling are extremely needed on modern cooling systems. Many methods, including treated surfaces and extended surfaces, have been investigated. Experimental research to enhance the subco...

(This article belongs to the Special Issue Sciences and Innovations in Heat Pump/Refrigeration: Volume II)
  • Article
  • Open Access
5 Citations
1,834 Views
20 Pages

Experimental Study on Flow Boiling Heat Transfer of Zeotropic Mixture R290/R601a in a Mini-Channel

  • Cheng Ren,
  • Qinglu Song,
  • Shoujun Sun,
  • Chuantong Zhang and
  • Dechang Wang

17 April 2025

The flow boiling heat transfer characteristics of zeotropic mixture R290/R601a in a horizontal mini-channel with an inner diameter of 2 mm were experimentally studied. The experiments were conducted at saturation pressure from 1 to 1.5 MPa, mass flux...

(This article belongs to the Section J1: Heat and Mass Transfer)
  • Article
  • Open Access
8 Citations
4,063 Views
14 Pages

Water Flow Boiling in Micro/Mini Channels Using Volume of Fluid Model

  • Muhammad Umer Khan Mughal,
  • Khalid Waheed,
  • Muhammad Imran Sadiq,
  • Altaf Hossain Molla and ,
  • Zambri Harun and
  • Amin Etminan
  • + 1 author+ 0 author

16 January 2024

Recent advancements in computational fluid dynamics (CFD) have triggered research in the field of heat exchangers. Driven by the need to decrease the size of heat exchangers, many researchers have exploited the higher heat transfer achieved by replac...

(This article belongs to the Section Applied Thermal Engineering)
  • Article
  • Open Access
7 Citations
3,313 Views
22 Pages

Numerical Simulation Research of Bubble Characteristics and Bubble Departure Diameter in Subcooled Flow Boiling

  • Jinfeng Wang,
  • Bingjun Wang,
  • Jing Xie,
  • Ke Lei and ,
  • Bo Yu and
  • Yuhang Sun
  • + 1 author+ 0 author

3 November 2022

Three-dimensional subcooled flow boiling of R134a in a horizontal tube was simulated by a VOF (volume of fluid) model combined with the level set method. Bubble characteristics were explored at heat flux of 0.3 MW/m2, inlet subcooling of 3 K, and inl...

(This article belongs to the Special Issue Advanced Numerical Analysis and Scientific Computing)
  • Feature Paper
  • Article
  • Open Access
18 Citations
3,264 Views
21 Pages

5 December 2022

A comparative analysis of the flow boiling characteristics of R450A, R515B, and R1234ze(E) inside a 7.0 mm OD microfin tube was performed. The mass velocity was explored from low values, starting from 50 kg m−2 s−1, up to 400 kg m−2...

(This article belongs to the Special Issue Two-Phase Heat Transfer in Industrial Engineering)
  • Article
  • Open Access
8 Citations
5,321 Views
24 Pages

18 January 2022

For the past few years, research in the field of flow boiling heat transfer has gained immense popularity for unravelling the dominant mechanism responsible for controlling heat transfer and identifying a parametric trend for understanding the charac...

(This article belongs to the Special Issue Heat Transfer Characteristics and Two-Phase Flow Performance)
  • Article
  • Open Access
9 Citations
3,135 Views
14 Pages

Application of the 2-D Trefftz Method for Identification of Flow Boiling Heat Transfer Coefficient in a Rectangular MiniChannel

  • Mirosław Grabowski,
  • Sylwia Hożejowska,
  • Beata Maciejewska,
  • Krzysztof Płaczkowski and
  • Mieczysław E. Poniewski

2 August 2020

The study presents the experimental and numeric heat transfer investigations in flow boiling of water through an asymmetrically heated, rectangular and horizontal minichannel, with transparent side walls. A dedicated system was designed to record ima...

(This article belongs to the Special Issue Thermal Systems)
  • Article
  • Open Access
17 Citations
2,934 Views
30 Pages

10 August 2021

This paper reports the results of heat transfer during refrigerant flow in rectangular mini-channels at stationary conditions. The impacts of selected parameters on boiling are discussed, i.e., thermal and flow parameters, dimensions and orientation...

(This article belongs to the Special Issue Two-Phase Flow with Boiling Heat Transfer)
  • Article
  • Open Access
19 Citations
5,671 Views
15 Pages

27 July 2021

In this paper experiments have been conducted to investigate the flow boiling and heat transfer characteristics in microchannels with three different surface wettability. Three types of microchannels with a super-hydrophilic surface (θ ≈ 0°), a hydro...

  • Article
  • Open Access
8 Citations
3,232 Views
11 Pages

19 September 2022

Bubble lift-off diameter is characterized as the size of a bubble rising from a wall, which is vital in the boundary condition of heat transfer model and interfacial area transport equation. In this paper, mechanistic force analysis was conducted to...

(This article belongs to the Topic Nuclear Energy Systems)
  • Article
  • Open Access
3 Citations
1,389 Views
20 Pages

22 January 2026

This experimental study comparatively investigates flow boiling performance and mechanisms in open and closed rectangular microchannels (ORMs/CRMs) with a high aspect ratio of 4. Fabricated on a copper substrate and sealed with a transparent window f...

(This article belongs to the Special Issue Advanced Technology for Solar Thermal Cooling, Heating, and Energy Storage—2nd Edition)
  • Feature Paper
  • Article
  • Open Access
6 Citations
3,086 Views
13 Pages

Flow Boiling Heat Transfer Intensification Due to Inner Surface Modification in Circular Mini-Channel

  • Aleksandr V. Belyaev,
  • Alexey V. Dedov,
  • Nikita E. Sidel’nikov,
  • Peixue Jiang and ,
  • Aleksander N. Varava and
  • Ruina Xu
  • + 1 author+ 0 author

12 December 2022

This work aimed to study the intensification of flow boiling heat transfer and critical heat flux (CHF) under conditions of highly reduced pressures due to a modification of the inner wall surface of a mini-channel. Such research is relevant to the g...

(This article belongs to the Special Issue Hydrodynamics and Heat Mass Transfer in Two-Phase Dispersed Flows in Pipes or Ducts)

of 9