Skip to Content

20,316 Results Found

  • Article
  • Open Access
19 Citations
3,017 Views
22 Pages

27 November 2022

Chitosan microcapsules draw attention due to their biodegradability, biocompatibility, antibacterial behavior, low cost, easy processing, and the capability to be used for different applications. This study utilized the electrospraying technique for...

(This article belongs to the Special Issue Leather, Textile and Bio-Based Materials: Production Processes, Environmental Impact and Life Cycle Assessment)
  • Article
  • Open Access
16 Citations
5,656 Views
15 Pages

Osmotic distillation (OD) was implemented at laboratory scale to concentrate a red fruit juice produced from a blend of blood orange, prickly pear, and pomegranate juice. The raw juice was clarified by microfiltration and then concentrated by using a...

(This article belongs to the Special Issue Application of Membranes and Membrane Processes in the Food Industry)
  • Article
  • Open Access
5 Citations
1,808 Views
23 Pages

22 November 2025

Hydroponic systems represent a sustainable, soil-less alternative to conventional agriculture, offering high water-use efficiency and reduced land demand. However, the resulting hydroponic wastewater solution (HWS) requires proper treatment to preven...

(This article belongs to the Special Issue Electrochemical Approaches to Sustainable Water Treatment: Tackling Pollution and Advancing Resource Recovery)
  • Article
  • Open Access
14 Citations
2,752 Views
18 Pages

Multi-Objective Optimization of Laser Cleaning Quality of Q390 Steel Rust Layer Based on Response Surface Methodology and NSGA-II Algorithm

  • Guolong Wang,
  • Jian Deng,
  • Jieheng Lei,
  • Wenjie Tang and ,
  • Wujiang Zhou and
  • Zeyong Lei
  • + 1 author+ 0 author

25 June 2024

To improve the laser cleaning surface quality of rust layers in Q390 steel, a method of determining the optimal cleaning parameters is proposed that is based on response surface methodology and the second-generation non-dominated sorting genetic algo...

  • Article
  • Open Access
12 Citations
2,582 Views
14 Pages

Optimization of Energy Production from Two-Stage Mesophilic–Thermophilic Anaerobic Digestion of Cheese Whey Using a Response Surface Methodology Approach

  • Andrey A. Kovalev,
  • Elza R. Mikheeva,
  • Vladimir Panchenko,
  • Inna V. Katraeva and ,
  • Dmitriy A. Kovalev,
  • Elena A. Zhuravleva and
  • Yuriy V. Litti
  • + 2 authors+ 0 author

25 November 2022

Spatial separation into acidogenic and methanogenic stages is considered a viable option to ensure process stability, energy efficiency and the better control of key anaerobic digestion (AD) parameters. The elucidation of the optimal modes of two-sta...

  • Article
  • Open Access
10 Citations
3,899 Views
28 Pages

Optimization of Piston Grooves, Bridges on Cylinder Head, and Inlet Valve Masking of Home-Fueled Diesel Engine by Response Surface Methodology

  • Mathad R. Indudhar,
  • Nagaraj R. Banapurmath,
  • K. Govinda Rajulu,
  • Arun Y. Patil and ,
  • Syed Javed and
  • T. M. Yunus Khan
  • + 1 author+ 0 author

15 October 2021

Naturally replenished biodiesel fuels are more precise in place of diesel engine applications as they have complying thermal properties, which are extensively used by various researchers. However, there is necessity to optimize their utility to meet...

  • Article
  • Open Access
542 Views
23 Pages

21 July 2026

To simultaneously suppress shrinkage-related defects and refine the solidification microstructure of Mn70Ni25Cr5 alloy ingots, ProCAST simulation was combined with Box–Behnken response surface methodology to optimize pouring temperature, fillin...

(This article belongs to the Section Metal Casting, Forming and Heat Treatment)
  • Article
  • Open Access
11 Citations
5,043 Views
21 Pages

17 November 2024

The work presents an analysis of the Gorlov helical turbine (GHT) design using both computational fluid dynamics (CFD) simulations and response surface methodology (RSM). The RSM method was applied to investigate the impact of three geometric factors...

(This article belongs to the Section B: Energy and Environment)
  • Article
  • Open Access
5 Citations
1,770 Views
13 Pages

Optimization of Antifungal Properties of Hop Cone Carbon Dioxide Extracts Based on Response Surface Methodology

  • Katarzyna Tyśkiewicz,
  • Renata Tyśkiewicz,
  • Marcin Konkol,
  • Marcin Gruba and
  • Rafał Kowalski

Response surface methodology (RSM) was employed to optimize the process parameters of the supercritical carbon dioxide extraction of hop cones in terms of their antifungal properties against Fusarium culmorum and Aspergillus niger. The effects of tem...

(This article belongs to the Special Issue Natural Products and Microbiology in Human Health)
  • Article
  • Open Access
598 Views
21 Pages

Optimization of Extraction of Total Terpenoids from Phellinus igniarius Using Response Surface Methodology and Evaluation of Their Antioxidant Activity

  • Lulu Li,
  • Zhe Wang,
  • Jinbiao Hao,
  • Ying Shao and ,
  • Zhilong Qu,
  • Zhenjiang Zhang,
  • Anhui Chen,
  • Zaizhong Ni and
  • Yanan Wang
  • + 4 authors+ 0 author

Phellinus igniarius is a medicinal fungus rich in terpenoids with potential biological activities. In this study, the P. igniarius terpenoid-enriched extract (PITT) was optimized using single-factor experiments combined with response surface methodol...

  • Article
  • Open Access
11 Citations
3,582 Views
14 Pages

Optimization of the Corrosion Resistance of Electroless Ni–W–P Coatings on Magnesium Alloys by the Response Surface Methodology

  • Bin Liu,
  • Qing Zhang,
  • Yang Li,
  • Yuebo Yang and ,
  • Tao Zhang,
  • Yanqiu Wang,
  • Yawei Shao,
  • Haiou Sun,
  • Zhongyi Wang and
  • Fuhui Wang
  • + 5 authors+ 0 author

25 December 2020

Plating processes greatly affect the corrosion resistance of electroless Ni–W–P coatings on magnesium alloys. In the present research, the corrosion resistance of electroless Ni–W–P alloy-coated AZ91D magnesium alloy was optim...

  • Feature Paper
  • Article
  • Open Access
2 Citations
3,506 Views
28 Pages

Cistus, Acacia, and Lemon verbena Valorization through Response Surface Methodology: Optimization Studies and Potential Application in the Pharmaceutical and Nutraceutical Industries

  • Filipa A. Fernandes,
  • Márcio Carocho,
  • Tiane C. Finimundy,
  • Miguel A. Prieto and ,
  • Isabel C. F. R. Ferreira,
  • Lillian Barros and
  • Sandrina A. Heleno
  • + 2 authors+ 0 author

Cistus ladanifer L., Acacia dealbata L., and Aloysia citrodora Paláu were subject to an optimization procedure for two extraction techniques (heat-assisted extraction (HAE) and ultrasound-assisted extraction (UAE)). The extracts were then anal...

(This article belongs to the Special Issue Plant-Derived Natural Compounds as Bioactive Molecules with Beneficial Effects on Human Health)
  • Article
  • Open Access
7 Citations
2,989 Views
27 Pages

20 June 2025

Optimizing vertical-axis hydrokinetic turbines is essential to enhance their energy conversion efficiency and structural reliability, particularly for decentralized renewable energy applications. This study focuses on identifying the most effective t...

(This article belongs to the Special Issue Modeling and Optimization for Multi-scale Integration)
  • Article
  • Open Access
19 Citations
6,529 Views
14 Pages

20 August 2021

The factors of brine time, concentration, and temperature, affect the high-quality production of brined cabbage used in Kimchi. Although changes in Kimchi cabbage quality depending on brine time and concentration have been reported, changes in brine...

(This article belongs to the Section Food Engineering and Technology)
  • Article
  • Open Access
40 Citations
7,761 Views
16 Pages

11 December 2015

Rhizoma Atractylodes macrocephala polysaccharides (RAMP) have been reported to have a variety of important biological activities. In this study, an ultrasonic-assisted enzymatic extraction (UAEE) was employed to obtain the highest extraction yield an...

(This article belongs to the Section Medicinal Chemistry)
  • Article
  • Open Access
128 Citations
8,610 Views
22 Pages

29 July 2018

This paper investigates the effects of basalt fiber content, length and asphalt-aggregate ratio on the volumetric and strength properties of styrene-butadiene-styrene (SBS)-modified asphalt mixture reinforced with eco-friendly basalt fiber. An experi...

(This article belongs to the Special Issue Environment-Friendly Construction Materials)
  • Article
  • Open Access
458 Views
22 Pages

Reaction Model and Optimization of the Alkaline Hydrolysis of SF-3 Double-Base Propellant Wastes Using Analysis of Response Surface Methodology

  • Jin Li,
  • Yuhui Jiang,
  • Jiaxin Niu,
  • Xinxin Liang and ,
  • Zongkuan Liu and
  • Zhaolin Gu
  • + 1 author+ 0 author

11 July 2026

The alkaline hydrolysis process is a promising method for treating SF-3 double-base propellant waste. This study aimed to validate the SF-3 waste alkaline hydrolysis reaction model and optimize its reaction conditions, thereby promoting the industria...

(This article belongs to the Section Environmental Sciences)
  • Article
  • Open Access
40 Citations
8,247 Views
19 Pages

With the rising awareness of microbial exopolysaccharides (EPSs) application in various fields, halophilic microorganisms which produce EPSs have received broad attention. A newly identified Kocuria rosea ZJUQH CCTCC M2016754 was determined to be a m...

(This article belongs to the Special Issue Natural Polysaccharides)
  • Article
  • Open Access
5 Citations
1,774 Views
17 Pages

Dry Reforming of Methane Using Gd-promoted Ni/SBA-16 Catalyst: Structure, Activity and Process Optimization with Response Surface Methodology

  • Salma A. Al-Zahrani,
  • Mohammed F. Alotibi,
  • Ahmed I. Osman,
  • Ahmed A. Bhran and ,
  • Maha Awjan Alreshidi,
  • Ahmed Al Otaibi,
  • Hessah Difallah A. Al-Enazy,
  • Nuha Othman S. Alsaif and
  • Ahmed S. Al-Fatesh
  • + 4 authors+ 0 author

6 October 2025

This work examines the effect of gadolinium (Gd) promotion on nickel-based SBA-16 catalysts for the dry reforming of methane (DRM), with the goal of improving syngas production by optimizing catalyst composition and operating conditions. Catalysts wi...

(This article belongs to the Special Issue Nanomaterials and Energetics: Design, Developments, and Challenges from Experimentation and Computation Aspects)
  • Article
  • Open Access
54 Citations
14,880 Views
15 Pages

Optimization of the Culture Medium Composition to Improve the Production of Hyoscyamine in Elicited Datura stramonium L. Hairy Roots Using the Response Surface Methodology (RSM)

  • Ryad Amdoun,
  • Lakhdar Khelifi,
  • Majda Khelifi-Slaoui,
  • Samia Amroune and ,
  • Mark Asch,
  • Corinne Assaf-Ducrocq and
  • Eric Gontier
  • + 2 authors+ 0 author

18 November 2010

Traditionally, optimization in biological analyses has been carried out by monitoring the influence of one factor at a time; this technique is called one‑variable‑at‑a‑time. The disadvantage of this technique is that it does not include any interacti...

(This article belongs to the Section Biochemistry)
  • Article
  • Open Access
17 Citations
5,586 Views
13 Pages

22 February 2023

Many coagulants such as aluminium sulfate, ferric sulfate, and ferrous sulfate have been investigated in the past, but there is a lack of data on their effectiveness to some specific water quality parameters. This study aimed at investigating the eff...

(This article belongs to the Special Issue Drinking Water: Water Quality and Treatment)
  • Article
  • Open Access
34 Citations
7,077 Views
12 Pages

Concentration of EPA and DHA from Refined Salmon Oil by Optimizing the Urea–Fatty Acid Adduction Reaction Conditions Using Response Surface Methodology

  • Gretel Dovale-Rosabal,
  • Alicia Rodríguez,
  • Elyzabeth Contreras,
  • Jaime Ortiz-Viedma and ,
  • Marlys Muñoz,
  • Marcos Trigo,
  • Santiago P. Aubourg and
  • Alejandra Espinosa
  • + 3 authors+ 0 author

26 April 2019

This research focused on obtaining eicosapentaenoic acid (EPA, 20:5 n-3) and docosahexaenoic acid (DHA, 22:6 n-3) (EPA+DHA) concentrates from refined commercial salmon oil (RCSO). Independent variables of the complexation process were optimized by me...

(This article belongs to the Special Issue Analytical Technology in Nutrition Analysis)
  • Article
  • Open Access
3 Citations
2,390 Views
24 Pages

24 August 2023

Conditions of industrial production introduce additional complexities while attempting to solve optimization problems of material technology processes. The complexity of the physics of such processes and the uncertainties arising from the natural var...

(This article belongs to the Special Issue Development and Modification of New or Recycled Materials and Technological Processes toward Sustainable Development)
  • Article
  • Open Access
2,474 Views
41 Pages

Optimal D-STATCOM Operation in Power Distribution Systems to Minimize Energy Losses and CO2 Emissions: A Master–Slave Methodology Based on Metaheuristic Techniques

  • Rubén Iván Bolaños,
  • Cristopher Enrique Torres-Mancilla,
  • Luis Fernando Grisales-Noreña,
  • Oscar Danilo Montoya and
  • Jesús C. Hernández

11 July 2025

In this paper, we address the problem of intelligent operation of Distribution Static Synchronous Compensators (D-STATCOMs) in power distribution systems to reduce energy losses and CO2 emissions while improving system operating conditions. In additi...

(This article belongs to the Section Computer Science, Mathematics and AI)
  • Article
  • Open Access
60 Citations
6,848 Views
17 Pages

Streptomyces alfalfae XN-04 has been reported for the production of antifungal metabolites effectively to control Fusarium wilt of cotton, caused by Fusarium oxysporum f. sp. vasinfectum (Fov). In this study, we used integrated statistical experiment...

(This article belongs to the Special Issue Advanced Research on Biological Control of Plant Disease or Microbial Interactions)
  • Article
  • Open Access
22 Citations
13,303 Views
15 Pages

16 July 2017

The deodorization of the refined palm oil process is simulated here using ASPEN HYSYS. In the absence of a library molecular distillation (MD) process in ASPEN HYSYS, first, a single flash vessel is considered to represent a falling film MD process w...

(This article belongs to the Collection Process System Engineering for More Efficient Power and Chemicals Production)
  • Article
  • Open Access
2 Citations
2,378 Views
14 Pages

3 December 2025

This study determined the optimal nitrogen–phosphorus–potassium (N-P-K) ratios for maximizing growth performance in spinach (Spinacia oleracea), bok choy (Brassica rapa subsp. chinensis), and Chinese cabbage (Brassica rapa pekinensis). A...

(This article belongs to the Section Plant Physiology and Metabolism)
  • Article
  • Open Access
1 Citations
791 Views
25 Pages

Optimizing the Composition of Solid Sodium Silicate-Activated Solid Waste-Based Geopolymer Based on the Response Surface Methodology and Its Performance

  • Huiyong Zhou,
  • Yanchao Wang,
  • Hua Gao,
  • Wei Guo and ,
  • Taotao Fan,
  • Chundi Si and
  • Xibao Ma
  • + 2 authors+ 0 author

3 April 2026

Alkali-activated solid waste-based geopolymer represents a novel form of inorganic cementitious material, which is one of the key research directions in the building materials field to achieve the targets of carbon peak and carbon neutrality. Therefo...

(This article belongs to the Topic Advances in Sustainable Materials and Products, 2nd Edition)
  • Article
  • Open Access
5 Citations
3,260 Views
25 Pages

4 November 2024

The suspension system of a commercial vehicle cab plays a crucial role in enhancing ride comfort by mitigating vibrations. However, conventional rubber suspension systems have relatively fixed stiffness and damping properties, rendering them inflexib...

  • Article
  • Open Access
5 Citations
8,473 Views
14 Pages

Modification of the Fermentation Process and Papain Enzymes in The Manufacture of Virgin Coconut Oil Using Optimization of Response Surface Methodology, Central Composite Design

  • Jakfar,
  • Husni Husin,
  • Komala Pontas,
  • Rizalman Mamat and ,
  • Mohd Rosdi Salleh,
  • Mirna Zulrika and
  • Ahmadi
  • + 2 authors+ 0 author

This research focuses on optimizing fermentation modification and papain enzymes. In manufacturing virgin coconut oil using the response surface methodology (RSM), the experiment was carried out based on the Central Composite Design (CCD). Coconut oi...

(This article belongs to the Section Fermentation for Food and Beverages)
  • Article
  • Open Access
1 Citations
5,736 Views
9 Pages

Optimized Isolation of Safranal from Saffron by Solid-Phase Microextraction (SPME) and Rotatable Central Composite Design-Response Surface Methodology (RCCD-RSM)

  • Panagiota-Kyriaki Revelou,
  • Spyridoula Mouzoula,
  • Marinos Xagoraris,
  • Haralambos Evangelaras and ,
  • George K. Papadopoulos,
  • Christos S. Pappas and
  • Petros A. Tarantilis
  • + 2 authors+ 0 author

Safranal is the main aroma component of saffron stigmas. It is also a great antioxidant with known pharmacological properties and is a potent indicator for the grading and authentication of saffron. In this study, the optimum extraction conditions of...

(This article belongs to the Collection Recent Trends in the Separation of Natural Products and Pharmaceuticals)
  • Article
  • Open Access
5 Citations
2,137 Views
27 Pages

10 September 2025

This study addresses the thermal hazards that arise during the initial engagement stage of wet clutches, where rapid heat generation within the transient lubricating film may cause premature film rupture, torque instability, and accelerated wear. To...

  • Proceeding Paper
  • Open Access
1 Citations
1,812 Views
9 Pages

Bauxite residue (BR), a solid waste generated during the Bayer process for alumina production, is a polymetallic source. This study aims to investigate the recovery of Fe, Al, and Na from H2-reduced BR pellets (under 5 vol% H2 + 95 vol% N2 with 45 L/...

(This article belongs to the Proceedings of The 2nd International Conference on Raw Materials and Circular Economy “RawMat2023”)
  • Article
  • Open Access
85 Views
18 Pages

Optimization of Activated Carbon Yield from Sargassum spp. Using Response Surface Methodology and Ridge Analysis

  • Oswaldo Moreno-Anguiano,
  • Luis Alberto Rodríguez-Picón,
  • Roberto Romero-López,
  • José Guadalupe Rutiaga-Quiñones and
  • Luis Asunción Pérez-Domínguez

10 November 2026

Sargassum spp. is an abundant marine biomass whose massive accumulation along Caribbean coasts has generated environmental and economic impacts. Its conversion into activated carbon (AC) provides an alternative for biomass utilization. In this study,...

(This article belongs to the Special Issue Recent Advances in Thermochemical Conversion of Biomass and Waste to Fuels, Chemicals and Materials)
  • Article
  • Open Access
685 Views
26 Pages

Optimization of Sawing Parameters for Apple Tree Branches and Study on the Influence of Support System Based on Explicit Dynamics and Response Surface Methodology

  • Yingjie Shi,
  • Hongjie Liu,
  • Xin Yang,
  • Jianping Li and ,
  • Pengfei Wang,
  • Lixing Liu and
  • Hao Guo
  • + 2 authors+ 0 author

In the mechanized pruning process of apple trees, reasonably matching cutting parameters is the key to reducing energy consumption and improving pruning quality. The conventional empirical parameter configuration usually ignores the vibration suppres...

(This article belongs to the Section Agricultural Technology)
  • Article
  • Open Access
18 Citations
5,923 Views
24 Pages

Optimization of Extraction Process for Improving Polyphenols and Antioxidant Activity from Papaya Seeds (Carica papaya L.) Using Response Surface Methodology

  • Silvia Mitzel Robles-Apodaca,
  • Ricardo Iván González-Vega,
  • Saúl Ruíz-Cruz,
  • María Isabel Estrada-Alvarado and ,
  • Luis A. Cira-Chávez,
  • Enrique Márquez-Ríos,
  • Carmen Lizette Del-Toro-Sánchez,
  • José de Jesús Ornelas-Paz,
  • Guadalupe M. Suárez-Jiménez and
  • Víctor Manuel Ocaño-Higuera
  • + 5 authors+ 0 author

2 December 2024

Papaya seeds (Carica papaya L.), a by-product of the food industry, contain primary metabolites and offer secondary health benefits, but are often considered a waste with no value. Therefore, the aim of this research was to optimize the extraction pr...

(This article belongs to the Special Issue Research and Optimization of Food Processing Technology)
  • Article
  • Open Access
10 Citations
4,114 Views
17 Pages

Process Optimization of Ultra-High Molecular Weight Polyethylene/Cellulose Nanofiber Bionanocomposites in Triple Screw Kneading Extruder by Response Surface Methodology

  • Nur Sharmila Sharip,
  • Hidayah Ariffin,
  • Yoshito Andou,
  • Yuki Shirosaki and ,
  • Ezyana Kamal Bahrin,
  • Mohammad Jawaid,
  • Paridah Md Tahir and
  • Nor Azowa Ibrahim
  • + 3 authors+ 0 author

30 September 2020

Incorporation of nanocellulose could improve wear resistance of ultra-high molecular weight polyethylene (UHMWPE) for an artificial joint application. Yet, the extremely high melt viscosity of the polymer may constrict the mixing, leading to fillers...

(This article belongs to the Special Issue 25th Anniversary of Molecules—Recent Advances in Materials Chemistry)
  • Article
  • Open Access
84 Citations
7,714 Views
15 Pages

Process Optimization Study of Zn2+ Adsorption on Biochar-Alginate Composite Adsorbent by Response Surface Methodology (RSM)

  • Subrata Biswas,
  • Manisha Bal,
  • Sushanta Kumar Behera,
  • Tushar Kanti Sen and
  • Bhim Charan Meikap

14 February 2019

A novel biochar alginate composite adsorbent was synthesized and applied for removal of Zn2+ ions from aqueous solution. Kinetics, equilibrium and thermodynamic studies showed the suitability of the adsorbent. From a Langmuir isotherm study, the maxi...

(This article belongs to the Special Issue Water Pollution Control Using Clay Minerals and Agricultural Biomass-Based Adsorbents)
  • Article
  • Open Access
6 Citations
2,891 Views
21 Pages

Optimization of Biomethane Production via Fermentation of Chicken Manure Using Marine Sediment: A Modeling Approach Using Response Surface Methodology

  • Fatma Abouelenien,
  • Toyokazu Miura,
  • Yutaka Nakashimada,
  • Nooran S. Elleboudy and ,
  • Mohammad S. Al-Harbi,
  • Esmat F. Ali and
  • Mustafa Shukry
  • + 2 authors+ 0 author

In this study, marine sediment (MS) was successfully used as a source of methanogenic bacteria for the anaerobic digestion (AD) of chicken manure (CM). Using MS showed high production in liquid and semi-solid conditions. Even in solid conditions, 169...

(This article belongs to the Section Environmental Science and Engineering)
  • Article
  • Open Access
38 Citations
4,836 Views
26 Pages

Modeling, Optimization and Performance Evaluation of TiC/Graphite Reinforced Al 7075 Hybrid Composites Using Response Surface Methodology

  • Mohammad Azad Alam,
  • Hamdan H. Ya,
  • Mohammad Yusuf,
  • Ramaneish Sivraj and ,
  • Othman B. Mamat,
  • Salit M. Sapuan,
  • Faisal Masood,
  • Bisma Parveez and
  • Mohsin Sattar
  • + 4 authors+ 0 author

20 August 2021

The tenacious thirst for fuel-saving and desirable physical and mechanical properties of the materials have compelled researchers to focus on a new generation of aluminum hybrid composites for automotive and aircraft applications. This work investiga...

(This article belongs to the Special Issue Recent Development of Surface Chemistry of Nanomaterials)
  • Article
  • Open Access
123 Views
18 Pages

Optimization of Synergistic Fermentation Parameters for Enzyme–Microbial Systems in Machine-Harvested Cotton Residue Using TOPSIS and Response Surface Methodology

  • Zhehuan Pu,
  • Huixin Su,
  • Shihong Yang,
  • Dong Chen and ,
  • Yin Ma,
  • Guohong Yuan,
  • Guishan Xu and
  • Halidai Rehemujiang
  • + 3 authors+ 0 author

Machine-harvested cotton residue is a major byproduct of cotton processing whose utilization is limited by a lignocellulosic matrix and antinutritional factors. This study combined an L49(76) orthogonal design with entropy-weighted TOPSIS for multi-i...

(This article belongs to the Section Animal and Feed Fermentation)
  • Article
  • Open Access
2 Citations
846 Views
12 Pages

17 February 2026

The aim of this study was to investigate the chemical composition and biological activity of extracts obtained from vegetative cranberry biomass generated during plantation rejuvenation. This biomass, composed mainly of young shoots removed during ro...

  • Article
  • Open Access
1 Citations
431 Views
28 Pages

9 May 2026

To optimize the dry mixing preparation process for permeable asphalt mixtures and elucidate the microscopic mechanism of high-viscosity modifiers, this study employed Response Surface Methodology (RSM). Independent variables, including mixing tempera...

(This article belongs to the Special Issue Latest Advances in Asphalt Materials in Modification and Performance Evaluation)
  • Article
  • Open Access
11 Citations
3,668 Views
15 Pages

Optimization of Extrusion Conditions for an Extruded Food Enriched with Mango By-Products (Mangifera indica var. Tommy Atkins) via Response Surface Methodology

  • Esther Medina-Rendon,
  • Elisa Beltran-Medina,
  • Guadalupe Guatemala-Morales,
  • Eduardo Padilla-Camberos and ,
  • Rosa Corona-González,
  • Pedro Mondragón-Cortez and
  • Enrique Arriola-Guevara
  • + 2 authors+ 0 author

8 November 2023

Today, mango by-products are produced in significant amounts, posing an environmental problem. Their incorporation into food products offers a solution to this problem. An extruded food product formulated with the flours of white corn, mango peel, an...

(This article belongs to the Special Issue Processing Foods: Process Optimization and Quality Assessment (II))
  • Article
  • Open Access
6 Citations
3,637 Views
21 Pages

4′-N-demethyl-vicenistatin is a vicenistatin analogue that has better antitumor activity with promising applications in the pharmaceuticals industry. The harnessing of the complete potential of this compound necessitates a systematic optimizati...

(This article belongs to the Section Fermentation Process Design)
  • Article
  • Open Access
1 Citations
1,494 Views
23 Pages

Optimization and Performance Modeling of Constructed Wetlands for the Treatment of Slaughterhouse Effluents in Tropical Zones Using Response Surface Methodology

  • Jesús Castellanos-Rivera,
  • Alex Elías Álvarez Month,
  • Cindy Carolina Contreras-Castro,
  • Jorge Figueroa and ,
  • Mayerlin Sandoval-Herazo,
  • Oscar Marín-Peña and
  • Luis Carlos Sandoval Herazo
  • + 2 authors+ 0 author

2 February 2026

The meat industry generates wastewater with high organic matter loads, posing a significant environmental risk if not properly treated. The present study evaluated the performance of a horizontal subsurface flow constructed wetland (HSSF-CW) treating...

(This article belongs to the Section Wastewater Treatment and Reuse)
  • Article
  • Open Access
50 Citations
2,940 Views
13 Pages

This study aims to propose a central composite design (CCD) combined with response surface methodology (RSM) to create a statistical experimental design. A new parametric optimization of entropy generation is presented. The flow behavior of magnetohy...

(This article belongs to the Section Inventions and Innovation in Energy and Thermal/Fluidic Science)
  • Review
  • Open Access
131 Citations
22,198 Views
31 Pages

13 February 2022

As a result of fossil fuel prices and the associated environmental issues, electric vehicles (EVs) have become a substitute for fossil-fueled vehicles. Their use is expected to grow significantly in a short period of time. However, the widespread use...

(This article belongs to the Section Sustainable Urban and Rural Development)
  • Article
  • Open Access
13 Citations
3,750 Views
18 Pages

31 August 2022

Aluminum-impregnated food waste was selected as a filter medium for removing As(III) from aqueous solutions. The modification of food waste and its carbonization conditions were optimized using the Box–Behnken model in the response surface meth...

(This article belongs to the Special Issue Agricultural Environment and Water Technology)
  • Feature Paper
  • Article
  • Open Access
5 Citations
2,590 Views
44 Pages

Optimization of Green Hydrogen Production via Direct Seawater Electrolysis Powered by Hybrid PV-Wind Energy: Response Surface Methodology

  • Sandile Mtolo,
  • Emmanuel Kweinor Tetteh,
  • Nomcebo Happiness Mthombeni,
  • Katleho Moloi and
  • Sudesh Rathilal

9 October 2025

This study explored the optimization of green hydrogen production via seawater electrolysis powered by a hybrid photovoltaic (PV)-wind system in KwaZulu-Natal, South Africa. A Box–Behnken Design (BBD), adapted from Response Surface Methodology...

(This article belongs to the Special Issue Green Hydrogen Energy Production)

of 407