Skip to Content

245 Results Found

  • Article
  • Open Access
8 Citations
3,187 Views
15 Pages

Explosive Spalling Behavior of Single-Sided Heated Concrete According to Compressive Strength and Heating Rate

  • Euichul Hwang,
  • Gyuyong Kim,
  • Gyeongcheol Choe,
  • Minho Yoon and ,
  • Minjae Son,
  • Dongkyun Suh,
  • Hamin Eu and
  • Jeongsoo Nam
  • + 3 authors+ 0 author

13 October 2021

In this study, the effects of heating rate and compressive strength on the spalling behavior of single-sided heated ring-restrained concrete with compressive strengths of 60 and 100 MPa were investigated. The vapor pressure and restrained stress insi...

(This article belongs to the Special Issue Research of Mechanical Behavior of Cement and Concrete Composites)
  • Article
  • Open Access
2 Citations
22 Views

Heat Transfer in Single-side Napped Fabrics During Compression

  • Sujian Zhang,
  • Yi Li,
  • Junyan Hu,
  • Xiao Liao and
  • Haotian Zhou

This paper presents a systematic analysis of the changes in thickness and the differences in the heat fux transfer for the two surfaces of selected single-side napped fabric, to explore the relationship between their heat fux and thickness during com...

  • Article
  • Open Access
20 Citations
5,440 Views
13 Pages

Residual Stress, Microstructure and Mechanical Properties in Thick 6005A-T6 Aluminium Alloy Friction Stir Welds

  • Xiaolong Liu,
  • Pu Xie,
  • Robert Wimpory,
  • Wenya Li and ,
  • Ruilin Lai,
  • Meijuan Li,
  • Dongfeng Chen,
  • Yuntao Liu and
  • Haiyan Zhao
  • + 4 authors+ 0 author

21 July 2019

Plates (37 mm thick) of 6005A-T6 aluminum alloy were butt joined by a single-sided and double-sided friction stir welding (FSW). The 3D residual stresses in the joints were determined using neutron diffraction. The microstructures were characterized...

(This article belongs to the Special Issue Characterization of Welded Joints)
  • Article
  • Open Access
4 Citations
2,205 Views
13 Pages

Thermal Performance of T-Shaped Ultra-Thin Vapor Chamber with Double-Sided Heating for LED Automotive Headlamp Cooling

  • Yaokang Zhang,
  • Tengqing Liu,
  • Yu Bai,
  • Shuangfeng Wang and ,
  • Qianxi Zhang and
  • Huifeng Kang
  • + 1 author+ 0 author

High heat flux brings about severe thermal problems for light-emitting diode (LED) automotive headlamps in narrow heat removal spaces, which will degrade their performance and lifespan. This study proposes an easily fabricated and feasible 1.3 mm thi...

(This article belongs to the Special Issue Functional Materials and Microdevices, 2nd Edition)
  • Article
  • Open Access
17 Citations
4,831 Views
31 Pages

16 December 2024

The rising demand for building cooling has led to increased energy consumption and environmental concerns. This study aims to examine the effectiveness of natural ventilation strategies as sustainable approaches in arid and semi-arid climates, focusi...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
20 Citations
7,503 Views
27 Pages

Impact of Indoor-Outdoor Temperature Difference on Building Ventilation and Pollutant Dispersion within Urban Communities

  • Yun Hu,
  • Yihui Wu,
  • Qun Wang,
  • Jian Hang and ,
  • Qingman Li,
  • Jie Liang,
  • Hong Ling and
  • Xuelin Zhang
  • + 3 authors+ 0 author

25 December 2021

Mechanical ventilation consumes a huge amount of global energy. Natural ventilation is a crucial solution for reducing energy consumption and enhancing the capacity of atmospheric self-purification. This paper evaluates the impacts of indoor-outdoor...

(This article belongs to the Special Issue Data-Driven Methods in Atmospheric Dispersion Modelling)
  • Article
  • Open Access
26 Citations
8,468 Views
13 Pages

2 June 2016

Double-sided laser beam welding of skin-stringer joints is an established method for many applications. However, in certain cases with limited accessibility, single-sided laser beam joining is considered. In the present study, single-sided welding of...

(This article belongs to the Special Issue Intermetallics 2016)
  • Article
  • Open Access
1 Citations
2,959 Views
18 Pages

6 June 2022

The thermal-controlled fracture method has been increasingly focused upon in the high-quality splitting of advanced brittle materials due to its excellent characteristics related to the fact that it does not remove material. For opaque, brittle mater...

(This article belongs to the Special Issue Processing Technology of Brittle Crystal Materials)
  • Communication
  • Open Access
8 Citations
4,545 Views
8 Pages

Simulation on an Advanced Double-Sided Cooling Flip-Chip Packaging with Diamond Material for Gallium Oxide Devices

  • He Guan,
  • Dong Wang,
  • Wentao Li,
  • Duo Liu and ,
  • Borui Deng and
  • Xiang Qu
  • + 1 author+ 0 author

3 January 2024

Gallium oxide (Ga2O3) devices have shown remarkable potential for high-voltage, high-power, and low-loss power applications. However, thermal management of packaging for Ga2O3 devices becomes challenging due to the significant self-heating effect. In...

(This article belongs to the Special Issue Semiconductors and Nanostructures for Electronics and Photonics)
  • Article
  • Open Access
6 Citations
3,097 Views
22 Pages

Effects of Radiant Floor Heating Integrated with Natural Ventilation on Flow and Dispersion in a Newly Decorated Residence

  • Peng-Yi Cui,
  • Jia-Qi Wang,
  • Feng Yang,
  • Qing-Xia Zhao and ,
  • Yuan-Dong Huang,
  • Yong Yang and
  • Wen-Quan Tao
  • + 2 authors+ 0 author

To date, few studies have been conducted on the characteristics of flow and dispersion caused by indoor radiant floor heating integrated with natural ventilation. In this study, we employed reduced−scale numerical models validated by wind&minus...

(This article belongs to the Section Environmental Science and Engineering)
  • Article
  • Open Access
30 Citations
9,364 Views
11 Pages

24 December 2016

Digital microfluidics (DMF) driven by electrowetting-on-dielectric (EWOD) has recently been attracting great attention as an effective liquid-handling platform for on-chip cooling. It enables rapid transportation of coolant liquid sandwiched between...

(This article belongs to the Special Issue Optofluidics 2016)
  • Article
  • Open Access
5 Citations
3,471 Views
16 Pages

26 August 2021

The mean and fluctuation flow patterns and heat transfer in a turbulent droplet-laden dilute flow behind a two-dimensional single-side backward-facing step are numerically studied. Numerical simulations are performed for water droplets, with the inle...

(This article belongs to the Special Issue Gas-Liquid Two-Phase Flow in the Pipe or Channel)
  • Article
  • Open Access
4 Citations
5,326 Views
21 Pages

5 April 2018

We report a new analytical model of the MEMS-based thermal property sensor for samples which are difficult to handle and susceptible to damage by thermal stimulus, such as living cells. Many sensor designs had been reported for thermal property measu...

(This article belongs to the Special Issue State-of-the-Art Lab-on-a-Chip Technology in Japan)
  • Article
  • Open Access
19 Citations
4,412 Views
10 Pages

17 February 2020

In this paper, we present a novel thermoresistive gas flow sensor with a high-yield and low-cost volume production by using front-side microfabricated technology. To best improve the thermal resistance, a micro-air-trench between the heater and the t...

(This article belongs to the Section A: Physics)
  • Technical Note
  • Open Access
3 Citations
5,201 Views
11 Pages

Thermal Performance of Double-Sided Metal Core PCBs

  • Mathew G. Pelletier,
  • Stone C. Preston,
  • Jim A. Cook,
  • Kevin D. Tran and ,
  • John D. Wanjura and
  • Greg A. Holt
  • + 1 author+ 0 author

Thermal management in printed circuit boards is becoming increasingly more important as the use of LEDs is now widespread across all industries. Due to availability of the preferred electronic LED current drivers and system constraints for a machine-...

(This article belongs to the Special Issue Robotics and Automation Engineering in Agriculture)
  • Article
  • Open Access
691 Views
20 Pages

16 April 2026

Urbanization and climate change intensify urban heat islands and air pollution; therefore, street canyon building planning that accounts for road orientation, shading, thermal environment, and ventilation is crucial. This study uses numerical simulat...

(This article belongs to the Special Issue Climate Adaptation and Resilience in Urban and Heritage Built Environments)
  • Article
  • Open Access
2 Citations
2,015 Views
36 Pages

Underground Space and Climate Synergy Wind–Heat Environmental Response in Cold Zones

  • Lufeng Nie,
  • Heng Liu,
  • Jiuxin Wang,
  • Shuai Tong and
  • Xiang Ji

20 June 2025

Underground spaces offer significant potential for sustainable urban development, particularly in cold climate regions where surface thermal fluctuations are extreme. However, optimizing the wind–heat environmental performance of such spaces re...

(This article belongs to the Section Building Energy, Physics, Environment, and Systems)
  • Article
  • Open Access
7 Citations
3,220 Views
17 Pages

14 September 2021

The paper concerns the numerical analysis of the influence for three different of welding heat source inclinations on the weld pool shape and mechanical properties of the resulting joint. Numerical analysis is based on the experimental tests of singl...

(This article belongs to the Special Issue Manufacturing and Mechanics of Materials)
  • Article
  • Open Access
8 Citations
4,132 Views
15 Pages

Fabrication and Mechanical Properties of Tungsten Inert Gas Welding Ring Welded Joint of 7A05-T6/5A06-O Dissimilar Aluminum Alloy

  • Wukun Wang,
  • Zengqiang Cao,
  • Kai Liu,
  • Xianglong Zhang and ,
  • Kewen Zhou and
  • Peng Ou
  • + 1 author+ 0 author

6 July 2018

In this paper, Tungsten Inert Gas Welding (TIG) and single-sided welding and double-sided forming have been used to weld the 7A05-T6/5A06-O dissimilar aluminum alloy circular welded joint of a ring-stiffened closed cylindrical sandwich shell. Microst...

  • Article
  • Open Access
3 Citations
848 Views
23 Pages

Microstructure Evolution-Induced Mechanical Response in Welded Joints of 7075-T6 Aluminium Alloy Thin Sheets Subjected to Different Friction Stir Paths

  • Jiajia Yang,
  • Feifan Lv,
  • Jie Liu,
  • Xiaoping Xie and ,
  • Qing Xu,
  • Pengju Xu,
  • Zenglei Ni,
  • Yong Huang and
  • Liang Huang
  • + 4 authors+ 0 author

2 February 2026

As a solid-state joining technology, friction stir welding (FSW) exhibits significant advantages for joining aluminium alloys, including low heat input and minimal formation of intermetallic compounds, thereby enhancing joint quality and mitigating d...

(This article belongs to the Special Issue Advances in Alloy Surface Mechanics: The Effects of Coating Technologies on Performance)
  • Article
  • Open Access
22 Citations
5,373 Views
16 Pages

11 July 2018

The article presents tests aimed to verify the possibility of Thermomechanically Controlled Processed (TMCP) steels T-joints laser welding. The 10 mm thick high-yield-point steel S700MC obtained in an industrial manufacturing process was used for tes...

(This article belongs to the Special Issue Laser Materials Fabrication and Joining)
  • Article
  • Open Access
11 Citations
4,664 Views
10 Pages

A Novel Method for Growing α-Ga2O3 Films Using Mist-CVD Face-to-face Heating Plates

  • Yan Zuo,
  • Qian Feng,
  • Tao Zhang,
  • Xusheng Tian and ,
  • Wenji Li,
  • Jiale Li,
  • Chunfu Zhang,
  • Jincheng Zhang and
  • Yue Hao
  • + 4 authors+ 0 author

23 December 2022

In this paper, the method for growing α-Ga2O3 films on c-plane sapphire substrates using an inexpensive fine-channel mist-CVD face-to-face heating plate was investigated. Because high temperatures can result in reactor deformation, expensive Al...

(This article belongs to the Special Issue Ga2O3-Based Nanomaterials)
  • Article
  • Open Access
4 Citations
2,931 Views
20 Pages

31 December 2021

The article describes a mathematical model of interconnected electromechanical and thermal processes in a linear induction motor (LIM). Here, we present the structure of the thermal model and provide the calculation formulas of the model. The thermal...

(This article belongs to the Section E2: Control Theory and Mechanics)
  • Feature Paper
  • Article
  • Open Access
1 Citations
2,123 Views
16 Pages

20 June 2024

Gas hydrate plugs in petroleum fluid pipelines are a major flow assurance problem and thus, it is important for industry to have reliable mathematical models for estimating the time required to dissociate a hydrate pipeline plug. The existing mathema...

(This article belongs to the Special Issue Recent Advances in Gas Hydrate Research Related to the Flow, Storage and Transport of Gases)
  • Article
  • Open Access
495 Views
21 Pages

Numerical Investigation of Residual Stress Distribution in Double-Lap T-Joints Effects of Welding Sequence

  • Kuangang Fan,
  • Kai Ling,
  • Shun Ye,
  • Lirong Huang and ,
  • Changlai Sun and
  • Yangwen Gong
  • + 1 author+ 0 author

This study investigates residual stress development in double-lap T-joints fabricated from medium- and heavy-gauge steel plates. A three-dimensional thermo-mechanically coupled finite element model was developed in Abaqus and validated against blind-...

  • Article
  • Open Access
28 Citations
8,008 Views
20 Pages

Investigation of Self-Powered IoT Sensor Nodes for Harvesting Hybrid Indoor Ambient Light and Heat Energy

  • Heng Xiao,
  • Nanjian Qi,
  • Yajiang Yin,
  • Shijie Yu and ,
  • Xiangzheng Sun,
  • Guozhe Xuan,
  • Jie Liu,
  • Shanpeng Xiao,
  • Yuan Li and
  • Yizheng Li
  • + 5 authors+ 0 author

7 April 2023

Sensor nodes are critical components of the Internet of Things (IoT). Traditional IoT sensor nodes are typically powered by disposable batteries, making it difficult to meet the requirements for long lifetime, miniaturization, and zero maintenance. H...

(This article belongs to the Special Issue Energy Harvesting in Environmental Wireless Sensor Networks)
  • Article
  • Open Access
2 Citations
4,353 Views
17 Pages

Effect of Artificial Aging of Peel Adhesion of Self-Adhesive Tapes on Different Construction Surfaces

  • Vaida Dobilaitė,
  • Milda Jucienė,
  • Karolis Banionis,
  • Jurga Kumžienė and ,
  • Valdas Paukštys,
  • Aurelija Stonkuvienė and
  • Kęstutis Miškinis
  • + 2 authors+ 0 author

3 August 2023

It is important to develop research on sealing materials in order to find effective solutions to ensure the energy efficiency of buildings. The aim of this study is to investigate the peel adhesion of single-sided self-adhesive tapes to different con...

(This article belongs to the Special Issue Innovative Building Materials)
  • Article
  • Open Access
413 Views
20 Pages

10 June 2026

Smoke spread from concourse fires into long entrance passageways can threaten evacuation in deep-buried subway stations, especially when smoke moves upward along inclined escalator sections. This study used a 1:8-scale Fire Dynamics Simulator model t...

(This article belongs to the Section Process Safety and Risk Management)
  • Article
  • Open Access
67 Citations
4,308 Views
20 Pages

Numerical Study on Welding Residual Stress Distribution of Corrugated Steel Webs

  • Haiping Zhang,
  • Zhiguo Ouyang,
  • Li Li,
  • Wei Ma and ,
  • Yang Liu,
  • Fanghuai Chen and
  • Xinhui Xiao
  • + 2 authors+ 0 author

27 October 2022

Residual stresses are an inevitable result of the welded fabrication process of corrugated steel webs (CSWs), resulting in structures with high and unpredictable stress fields, causing unexpected failures. The residual stress field is affected by str...

(This article belongs to the Section Welding and Joining)
  • Article
  • Open Access
366 Views
36 Pages

Monitoring the surface thermal state of thermal protection structures (TPS) is essential for the safe operation and health assessment of hypersonic vehicles. However, direct sensor deployment on heated surfaces suffers from poor survivability, while...

(This article belongs to the Section Aeronautics)
  • Article
  • Open Access
16 Citations
4,958 Views
14 Pages

23 September 2018

The test lecture rooms on Katholieke Universiteit Leuven (KU Leuven) Ghent Technology Campus (Belgium) are a demonstration case of Annex 62: Ventilative Cooling of the International Energy Agency’s Energy in Buildings and Communities programme...

(This article belongs to the Special Issue Ventilation and Passive Cooling for Healthy and Comfortable Buildings)
  • Article
  • Open Access
1,876 Views
21 Pages

24 August 2025

Controlled thermal stratification in water is crucial for applications such as testing the thermal stealth of underwater vehicles and studying aquatic ecosystems. However, existing laboratory methods for generating such stratified environments often...

(This article belongs to the Special Issue Advances in Fluid Mechanics Analysis)
  • Article
  • Open Access
3 Citations
3,933 Views
16 Pages

Design and Test of Duckbill Welding Robot for Cotton Seeder

  • Yu Ren,
  • Wensong Guo,
  • Xufeng Wang,
  • Can Hu and ,
  • Long Wang,
  • Xiaowei He and
  • Jianfei Xing
  • + 2 authors+ 0 author

To improve the automation, welding efficiency, and welding quality of duckbill welding of the cotton seeder, this study designed a cotton seeder duckbill welding robot. According to the characteristics of the duckbill weldment and welding requirement...

(This article belongs to the Special Issue Robots and Autonomous Machines for Agriculture Production)
  • Article
  • Open Access
177 Views
20 Pages

21 October 2026

Global climate change has led to frequent and intensified extreme high-temperature disasters, severely challenging the operational resilience and sustainable operation of urban power energy systems. Extreme heat triggers a dual risk of surging coolin...

(This article belongs to the Section Energy Sustainability)
  • Article
  • Open Access
10 Citations
4,158 Views
19 Pages

15 October 2021

This study investigates the single-phase heat transfer, pressure drop, and temperature distribution of water in an industrial plate and shell heat exchanger (PSHE) under high-temperature conditions. In this experiment, the hot fluid flows downward on...

(This article belongs to the Special Issue Fluid Flow and Heat Transfer Analysis in Industrial Applications)
  • Article
  • Open Access
147 Views
26 Pages

Smoke Evolution and Evacuation Dynamics in an Underground Powerhouse: Fire Safety Margin Evaluation Coupled with Sprinkler Intervention and Exit Blockage

  • Jing Li,
  • Yi-Lin Sun,
  • Yun-Feng Liu,
  • Qiu-Hong Wang and ,
  • He Zhu,
  • Wen-Zhe Mao and
  • Yi-Fan Li
  • + 2 authors+ 0 author

5 November 2026

To address the challenge of quantitatively coupling fire smoke evolution and occupant evacuation in the underground powerhouses of large-scale pumped-storage power stations, full-scale three-dimensional numerical models were developed using PyroSim f...

(This article belongs to the Special Issue Fire Dynamics, Human Behavior and Safety Design for Tunnelling and Underground Space)
  • Article
  • Open Access
15 Citations
3,748 Views
20 Pages

21 September 2023

Battery-powered electric vehicles (EVs) have emerged as an environmentally friendly and efficient alternative to traditional internal combustion engine vehicles, while their single-charge driving distances under cold conditions are significantly limi...

(This article belongs to the Section Energy Sustainability)
  • Article
  • Open Access
2 Citations
2,651 Views
18 Pages

17 February 2024

Cement-based material encapsulation is a method of encapsulating electronic devices in highly thermally conductive cement-based materials to improve the heat dissipation performance of electronic components. In the field of construction, a thermoelec...

(This article belongs to the Special Issue Advance in Sustainable Construction Materials)
  • Article
  • Open Access
585 Views
21 Pages

Experimental Investigation of Multi-Swirl Inserts for Enhancing High-Heat-Flux Subcooled Flow Boiling Under One-Sided Heating Conditions

  • Yohan Lee,
  • Sumin Lim,
  • UngJin Na,
  • Gyudong Lee and ,
  • Donkoan Hwang,
  • Sungjin Kwon and
  • HangJin Jo
  • + 2 authors+ 0 author

31 July 2026

Subcooled flow boiling experiments were conducted to investigate the effect of multi-swirl inserts on heat transfer, critical heat flux, and pressure drop under one-sided high-heat-flux heating conditions. Water was used as the working fluid, and fou...

(This article belongs to the Special Issue New Advances in Heat and Mass Transfer and Thermal Management in Energy Systems—2nd Edition)
  • Article
  • Open Access
2 Citations
2,652 Views
22 Pages

29 July 2022

Single-/multi-objective optimization based on genetic algorithm is employed in the present study to conduct an optimization design for the primary heat exchanger (HE) in a lead-cooled fast reactor (LFR), where the liquid lead and supercritical carbon...

  • Article
  • Open Access
17 Citations
4,936 Views
18 Pages

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

  • Yuxuan Ji,
  • Zheng Wang,
  • Mingxuan Wang,
  • Yafei Liu and ,
  • Haoran Xu,
  • Peiwang Zhu,
  • Shilei Ma,
  • Zhigang Yang and
  • Gang Xiao
  • + 4 authors+ 0 author

6 July 2022

The supercritical carbon dioxide (sCO2) Brayton cycle is the preferred power cycle for future nuclear energy, fossil energy, solar energy, and other energy systems. As the preferred regenerator in the cycle, the printed circuit heat exchanger (PCHE)...

(This article belongs to the Special Issue Heat Transfer in Pipe Minichannels: Simulation, Experiment and Application)
  • Article
  • Open Access
2 Citations
1,427 Views
17 Pages

14 October 2025

Helical coiled tube (HCT) heat exchangers (HXs) are used in the nuclear industry, particularly in the residual heat removal systems of nuclear power plants (NPPs) and steam generators for small modular reactors. In this study, a single-phase CFD mode...

  • Article
  • Open Access
656 Views
20 Pages

Accurate thermal modeling of friction stir welding (FSW) requires correct representation of heat generation and heat partitioning at the workpiece/tool interface. However, most published models are validated against temperature measurements from only...

  • Article
  • Open Access
855 Views
13 Pages

Structurally Colored Photonic Janus Films for Switchable Radiative Cooling and Solar Heating

  • Wei Wei,
  • Hengrui Gu,
  • Xingchen Zhao,
  • Yulong Lu and ,
  • Kerui Li,
  • Hongzhi Wang and
  • Jianjun Zhang
  • + 2 authors+ 0 author

Personal thermal management (PTM) requires materials that can adapt to dynamically changing environments, yet most existing systems are limited to single-mode cooling or heating and lack tunable optical appearance. Here, we report a structurally colo...

(This article belongs to the Special Issue Flexible and Wearable Nanoelectronics: From Materials to Devices)
  • Article
  • Open Access
32 Citations
8,360 Views
14 Pages

Heat Exchanger Sizing for Organic Rankine Cycle

  • James Bull,
  • James M. Buick and
  • Jovana Radulovic

14 July 2020

Approximately 45% of power generated by conventional power systems is wasted due to power conversion process limitations. Waste heat recovery can be achieved in an Organic Rankine Cycle (ORC) by converting low temperature waste heat into useful energ...

(This article belongs to the Special Issue Applications for the Organic Rankine Cycle)
  • Article
  • Open Access
18 Citations
6,036 Views
11 Pages

Estimating the Thermal Properties of the Cover and the Floor in a Plastic Greenhouse

  • Hyung-Kweon Kim,
  • Young-Sun Ryou,
  • Young-Hwa Kim,
  • Tae-Seok Lee and ,
  • Sung-Sik Oh and
  • Yong-Hyeon Kim
  • + 1 author+ 0 author

2 April 2021

This study comprehensively analyzed the heat loss and total heat transfer coefficient (U-value) of a single-span experimental plastic greenhouse covered with a double layer of 0.1 mm thick polyethylene. The air temperature and heat flux (W m−2) of th...

  • Article
  • Open Access
9 Citations
3,888 Views
18 Pages

Measurements of Operating Parameters of a Metal Hydride Compressor with a Heat Pump

  • Tomáš Brestovič,
  • Natália Jasminská and
  • Marián Lázár

24 March 2022

The hydrogen compression that occurs in a metal hydride compressor is based on the chemical and thermal processes of hydrogen absorption and desorption into an intermetallic structure of metals. The concept presented in this article is centred on the...

(This article belongs to the Special Issue Mechanical and Biomedical Engineering in Paradigm)
  • Article
  • Open Access
2 Citations
2,772 Views
16 Pages

22 March 2024

Natural convection heat transfer from an inclined array of square cross-section cylinders is experimentally studied. Three cylinders of side length D = 0.02 m and 1 m length are used to form the inclined array. Three-cylinder axis inclination angles...

(This article belongs to the Special Issue Research on Fluid Mechanics and Heat Transfer)
  • Article
  • Open Access
39 Citations
7,348 Views
19 Pages

1 December 2016

Knowledge concerning the complicated changes of mass and heat transfer is desired to improve the performance and durability of unitized regenerative fuel cells (URFCs). In this study, a transient, non-isothermal, single-phase, and multi-physics mathe...

  • Article
  • Open Access
7 Citations
3,257 Views
17 Pages

Numerical Study on the Evaporation of a Non-Spherical Sessile Droplet

  • Wenbin Cui,
  • Yang Cao,
  • Shoupei Wang,
  • Tianci Zhang and ,
  • Hongbin Ma,
  • Chao Chang,
  • Dalong Liang and
  • Jingming Dong
  • + 3 authors+ 0 author

28 December 2022

To better understand the evaporation of a non-spherical droplet, a two-dimensional simulation was conducted to investigate the evaporation on the asymmetric cross-section of non-spherical sessile droplets, which are characterized by two curvatures wi...

(This article belongs to the Section A: Physics)

of 5