The impact of hot air drying temperature on instant dough sheets’ qualities was investigated based on water migration and gluten network structure changes. The results revealed that the drying process redistributed the hydrogen proton, with dee...
Therapeutic dressings to enhance burn wound repair and regeneration are required. Silk fibroin (SF), a natural protein, induces cell migration and serves as a biomaterial in various dressings. SF dressings usually contain α-helices and β-sheets. The...
In this study, the microstructural evolution and the interaction between the clad and the core alloys that occurs during the brazing process of two-layer Al sheets with equiaxed grains were examined. The study was carried out using optical microscopy...
Collective motion of cell sheets plays a role not only in development and repair, but also in devastating diseases such as cancer. However, unlike single-cell motility, collective motion of cell sheets involves complex cell-cell communication during...
Cell migration is a complex, tightly regulated multistep process in which cytoskeletal reorganization and focal adhesion redistribution play a central role. Core to both individual and collective migration is the persistent random walk, which is char...
A precautionary specific migration limit of 40 µg/kg for styrene from food contact materials is currently under evaluation in Europe. In the ongoing discussion about applicable methods to demonstrate compliance, testing with food instead of sim...
Herein, a micro-patterned cell adhesive surface is prepared for the future design of medical devices. One-dimensional polydimethylsiloxane (PDMS) micro patterns were prepared by a photolithography process. We investigated the effect of microscale top...
A hybrid cell sheet engineering approach was developed using ultra-thin nanofiber arrays to host the formation of composite nanofiber/cell sheets. It was found that confluent aligned cell sheets could grow on uniaxially-aligned and crisscrossed nanof...
In order to improve the Cu/Cu joint quality, the bottom Cu sheet surface to be welded was dampened by a drop of absolute ethyl alcohol before the welding. Then, the ultrasonic spot welding (USW) was utilized to join a 0.5 mm thick Cu sheet to a 1.0 m...
A layered construct was developed by combining a porous polymer sheet and a cell sheet as a tissue engineered vascular patch. The primary objective of this study is to investigate the influence of mesenchymal stem cells (MSCs) sheet on the tensile me...
In the friction stir welding (FSW) of ultra-thin dissimilar metal sheets, different physical material properties, the reduction of plastic metal in the weld zone, and insufficient plastic metal flow lead to poor weld seam shapes and joint qualities....
This study uses an airborne Light Detection and Ranging (LiDAR) survey, historical aerial photography and historical climate data to describe the character and dynamics of the Nogahabara Sand Dunes, a sub-Arctic dune field in interior Alaska’s discon...
The effects of final rolling temperature on the microstructures, texture and mechanical properties of AZ31 Mg alloy sheets prepared by equal channel angular rolling and continuous bending (ECAR-CB) were investigated. Extension twins {10–12} could be...
A novel phosphorus and oxygen co-doped graphitic carbon nitride (sheetP-O-CNSSA) photocatalyst was successfully synthesized and applied for H2 evolution under visible light. In the synthesis process of sheetP-O-CNSSA, the supramolecular complex was d...
Long-term live cell imaging requires sophisticated and fully automated commercial-stage incubators equipped with specified inverted microscopes to regulate temperature, CO2 content, and humidity. In this study, we present a CO2-free on-stage incubato...
Human adipose-derived stromal cells (ADSCs) are an important resource for cell-based therapies. However, the dynamics of ADSCs after transplantation and their mechanisms of action in recipients remain unclear. Herein, we generated genetically enginee...
The effects of trace Ce on the microstructure and texture of non-oriented silicon steel during recrystallization and grain growth were examined using X-ray diffraction and electron backscatter diffraction. Additionally, this study focused on investig...
Metamaterial biosensors have been extensively used to identify cell types and detect concentrations of tumor biomarkers. However, the methods for in situ and non-destruction measurement of cell migration, which plays a key role in tumor progression a...
AgI/MFeO3/g-C3N4 (M = Y, Gd, La) nano sheet–sphere–sheet photocatalysts were synthesized by a simple ultrasound-assisted hydrothermal approach. We characterized the microstructure, surface morphology, and optical absorption capacity of th...
In vitro studies on adherent cells require a process of passage to dissociate the cells from the culture substrate using enzymes or other chemical agents to maintain cellular activity. However, these proteolytic enzymes have a negative influence on t...
The main conservation problem of p-PVC artworks is phthalate-based plasticizer migration. Phthalate migration from the bulk to the surface of the materials leads to the formation of a glossy and oily film on the outer layers, ultimately reducing the...
Due to frequent human disturbance and the influence of crop growth and development, the migration of soil organic carbon (SOC) in sloping farmland is considerably different to those in other ecosystems. The impacts of maize over its entire growth per...
The amplitude-dependent internal friction of continuously-cast and rolled AZ31 magnesium alloy was measured in this study. Samples were annealed and quenched step by step; immediately after the treatment, the amplitude dependence of the logarithmic d...
This study investigated the gel performance of Spanish mackerel surimi gels (SMSGs) modified by three anionic polysaccharides: κ-carrageenan (KC), ι-carrageenan (IC), and gellan gum (GG). By incorporating polysaccharides, SMSGs showed a 24...
The poor and slow healing capacity of tendons requires novel strategies to speed up the tendon repair process. Hence, new and promising developments in tendon tissue engineering have become increasingly relevant. Previously, we have established a ten...
The purpose of this study was to enhance the antimicrobial activity of bagasse paper by coating the paper with bismuth oxide (Bi2O3) and using it to accelerate the process of wound healing. Paper sheets were prepared from sugarcane waste (bagasse). F...
Studies of phage capsids have at least three potential interfaces with nanomedicine. First, investigation of phage capsid states potentially will provide therapies targeted to similar states of pathogenic viruses. Recently detected, altered radius-st...
The design of novel materials to use simultaneously in an ocular system for driven therapeutics and wound healing is still challenging. Here, we produced nanocomposites of tungsten disulfide carriers with spherical cobalt ferrite nanoparticles (NPs)...
Inside the adult CNS, oligodendrocyte progenitor cells (OPCS) are able to proliferate, migrate and differentiate into mature oligodendrocytes (OLs) which are responsible for the production of myelin sheet and energy supply for neurons. Moreover, in d...
Adipose tissue derived stem cells (ADSCs) are mesenchymal stem cells identified within subcutaneous tissue at the base of the hair follicle (dermal papilla cells), in the dermal sheets (dermal sheet cells), in interfollicular dermis, and in the hypod...
Cellular infiltration into traditional electrospun nanofibers (NFs) is limited due to their dense structures. We were able to obtain polycaprolactone (PCL) NFs with variable and defined pore sizes and thicknesses by using a customized programmed NF c...
Polydimethylsiloxane (PDMS) membranes can allow the precise control of well-defined micropore generation. A PDMS solution was mixed with a Rushton impeller to generate a large number of microbubbles. The mixed solution was spin-coated on silicon wafe...
This communication reports the first comparative study addressing the effects of both structural architecture and mechanical loading on human mesenchymal stem cells (hMSC) positioned at the interface of a 3D in vitro model composed of a nanofibre/hyd...
The Greenland Ice Sheet is now the largest land ice contributor to global sea level rise, largely driven by increased surface meltwater runoff from the ablation zone, i.e., areas of the ice sheet where annual mass losses exceed gains. This small but...
MXenes, with a high surface area, abundant active sites, and excellent ion transport properties, have demonstrated excellent electrochemical performance. However, systematic comparisons of the structural evolution process and electrochemical performa...
The effect of the amount of ice added (20–60%) on the gel properties and water migration of Nemipterus virgatus surimi gel obtained with two-stage heat treatment was studied. The gel strength and water-holding capability (WHC) of the surimi gel with...
20 August 2025
Despite its positive impact on household income, parental labour migration negatively affects left-behind children (LBC) and their caregivers. Studies in various settings have reported different impacts on LBC, but less is known about the consequence...
This study investigates the role of naming practices as cultural repositories that preserve family, lineage, and community identity. It explores how anthroponymy encodes histories of ancestry, migration, settlement, and sociopolitical organisation in...
The location of the high mountains of southern Europe has been crucial in the phylogeography of most European species, but how extrinsic (topography of sky islands) and intrinsic features (dispersal dynamics) have interacted to shape the genetic stru...
Many of the Earth’s sedimentary basins are affected by glaciations. Repeated glaciations over millions of years may have had a significant effect on the physical conditions in sedimentary basins and on basin structuring. This paper presents som...
Although K+ is readily inserted into graphite, the volume expansion of graphite of up to 60% upon the formation of KC8, together with its slow diffusion kinetics, prevent graphite from being used as an anode for potassium-ion batteries (PIBs). Soft c...
This study investigated films with remarkably high electrical conductivity after they were easily prepared from organic/inorganic nanohybrid solutions containing an organic polymeric dispersant and two-dimensional nanoscale silicate platelets as the...
Developing fiber-shaped supercapacitors (FSCs) with high capacitance, high energy density, and exceptional rate performance is crucial for reliable, stable and high-performance wearable electronics. Here, a polyaniline (PANI) @ MXene Ti3C2Tx/graphene...
In full-thickness wounds, inflammation, lack of matrix deposition, and paucity of progenitor cells delay healing. As commercially available solid (sheet) scaffolds are unable to conform to wounds of varying shapes and sizes, we previously generated a...
Epiretinal membranes (ERMs) are sheets of tissue that pathologically develop in the vitreoretinal interface leading to progressive vision loss. They are formed by different cell types and by an exuberant deposition of extracellular matrix proteins. R...
The current exploration aims to inspect the features of thermal radiation on the buoyancy or mixed convective fluid flow induced by nanofluid through a stretching permeable bended sheet. The impact of activation energy and binary reaction along with...
Stress affects the microstructure of the material to influence the durability and service life of the components. However, the previous work of stress measurement lacks quantification of the different variations in time and spatial features of microm...
Antarctica is covered by a thick ice sheet, and the application of geophysical methods is necessary to image the subglacial structures for studying the hydrologic systems and tectonic deformations in the Antarctic continent. The magnetotelluric (MT)...
Process mineralogy shows that most vanadium in mica-type black shale exists in the octahedral sites of muscovite. The extraction of vanadium mainly occurs in the acid leaching process with participation of H ions. In this work, we firstly analyzed th...
We use density functional theory (DFT) calculations to show that oxygen vacancies (
of 3