Owing to their distinct features, such as structural simplicity and excellent load-carrying capacity, steel truss bridges are widely applied as critical transportation networks. However, many previously designed steel truss bridges that are located i...
Farmed catchments have greater temporal and spatial heterogeneity of soil moisture than natural catchments. Increased knowledge about the variation of soil moisture in farmed catchments has important implications for the adoption of appropriate tilla...
Wireless sensor networks (WSNs) are attracting increasing research interest due to their ability to monitor large areas independently. Their reliability is a crucial issue, as it is influenced by hardware, data, and energy-related factors such as loa...
This work presents a comprehensive performance evaluation and optimum design of a novel symmetrical 4-PPR (P indicates the prismatic joint, R denotes the revolute joint, and the letter with underline represents an active joint) redundant planar paral...
Due to the high cost of failures of wind turbines, redundancy designs are commonly applied in wind turbines for improving the reliability and availability of systems. For this reason, replacing failed components with other working components of the s...
Semisubmersible floating structures are becoming the predominant understructure type for floating offshore wind turbines (FOWTs) worldwide. As FOWTs are erected far away from land and in deep seas, they inevitably suffer violent and complicated sea c...
Topology architecture has a decisive influence on network reliability. In this paper, we design a novel redundancy topology and analyze the structural robustness, the number of redundant paths between two terminal nodes, and the reliability of the pr...
This paper divides the execution process of the command post system into four stages: information acquisition, information processing, decision control and response execution. It combines multilayer complex networks with a phased-mission system. Most...
In many applications, intelligent agents need to identify any structure or apparent randomness in an environment and respond appropriately. We use the relative entropy to separate and quantify the presence of both linear and nonlinear redundancy in a...
Hyperspectral imaging systems are becoming widely used due to their increasing accessibility and their ability to provide detailed spectral responses based on hundreds of spectral bands. However, the resulting hyperspectral images (HSIs) come at the...
This paper is centered around the theoretical, experimental, and simulation analysis of safe passage redundancy and the mechanical deformation of the taxiway bridge under the fatigue accumulation state, and we define the redundancy as the remaining t...
A coplanar electrode array sensor is established for the imaging of composite-material adhesive-layer defect detection. The sensor is based on the capacitive edge effect, which leads to capacitance data being considerably weak and susceptible to envi...
The relationship between synthetic factors and the resulting structures is critical for rational synthesis of zeolites and related microporous materials. In this paper, we develop a new feature selection method for synthetic factor analysis of (6,12)...
This paper proposes an early warning method for thermal runaway in sodium-ion batteries (SIBs) based on multidimensional signal analysis and redundancy optimization. By analyzing signals such as voltage, temperature, strain, and gas concentrations, P...
As psychological research progresses, the issue of concept overlap becomes increasing evident, adding to participant burden and complicating data interpretation. This study introduces an Embedding-based Semantic Analysis Approach (ESAA) for detecting...
It has been nearly 60 years since the introduction of the Gough–Stewart manipulator (GSM). With the advantages of superior load capacity and high precision, the GSM still plays an important role in many fields. However, the GSM has limitations...
The increasing demand for high-speed, energy-efficient, and miniaturized electronics has led to significant challenges and compromises in the domain of conventional clock-based digital designs, most notably reduced circuit reliability, particularly i...
A new approach on how to formulate redundancy-free models for mathematical descriptions of three-phase catalytic hydrogenation of cinnamaldehyde is presented. An automatically created redundant (generalized) model is formulated according to the compl...
The influence of redundant implementations on success of physical attacks against cryptographic devices is currently under-researched. This is especially an issue in application fields such as wearable health, industrial control systems and the like...
A water conveyance tunnel is narrow and enclosed with a complex distribution of flow field. The performance of sensors such as Doppler log, magnetic compass, sonar, and depth gauge used by conventional underwater vehicles in the tunnel is greatly aff...
High-quality data are always desirable for superior decision-making in smart buildings. However, latency issues, communication failures, meter glitches, etc., create data anomalies. Especially, the redundant/duplicate records captured at the same tim...
With the rapid development of the internet, the number of offline customers in the bank branches decreases, and the existing layout of branches leads to the increase of operation cost, which has an impact on the sustainable operation of commercial ba...
In order to analyse the changes in pit stability caused by the removal of steel support and solid casting of a variable section pit, this paper carried out the whole process of numerical simulation of the selected section pit construction using ABAQU...
The kinematics and redundant space analysis of redundant robots constitutes important research content. Currently, methods such as geometric method and iterative optimization method are relatively complicated and inconvenient for programming and prac...
The rational flow of production factors is crucial for promoting benign interactions between urban and rural areas. To unveil the intrinsic mechanisms of factor flow pathways promoting mutual symbiosis between urban and rural areas, this study, based...
This article presents a model of a novel 4-DOF kinematically redundant planar parallel grasping manipulator. As distinct from the traditional 4-DOF manipulator, the proposed design includes an extensible platform, which provides kinematic redundancy....
The integration of redundant structures into robotic systems enhances the degrees of freedom (DOFs), flexibility, and capability to perform complex tasks. This study evaluates the mechanical performance of a 9-DOF series-parallel hybrid redundant dev...
The Time-Sensitive Networking (TSN) Task Group has standardised different mechanisms to provide Ethernet with hard real-time guarantees and reliability in layer 2 of the network architecture. Specifically, TSN proposes using space redundancy to incre...
In recent years, the ultra-high voltage direct current (UHVDC) transmission system has been developed rapidly for its significant long-distance, high-capacity and low-loss properties. Equipment failures and overall outages of the UHVDC system have in...
The rapid growth in data makes the quest for highly scalable learners a popular one. To achieve the trade-off between structure complexity and classification accuracy, the k-dependence Bayesian classifier (KDB) allows to represent different number of...
Non-probabilistic structural reliability analysis is based on the convex model and more applicable for practical engineering problems with limited samples. Recently, the authors proposed a non-probabilistic reliability bounds method (NRBM) for series...
The soil–water partition coefficient (Kd) of antibiotics is a critical indicator for assessing their migration potential in the environment. Currently, research on antibiotic Kd values in specific geological settings such as karst wetlands rema...
The SNP variation in sockeye salmon across the Asian part of its range was studied in 23 samples from 16 lake–river systems of the West Pacific Coast to improve understanding of genetic adaptation in response to spawning watersheds conditions....
This study explored the ecological niche and interspecific relationships among the main fish species in the coastal waters of Hainan Island based on data from fishery stock surveys conducted in the spring and autumn of 2022. The methods of chi-square...
Gehu Lake in the lower reaches of the Taihu Lake Basin has experienced water quality degradation due to increasing human activities, pollutant discharge, and non-point source pollution, which requires ecosystem restoration. Currently, the community s...
Accurate prediction of the state of charge (SOC) of a battery pack is essential to improve the operational efficiency and safety of energy storage systems. In this paper, we propose a novel lithium-ion battery (Lib) pack SOC prediction framework that...
Deep-learning-based applications bring impressive results to graph machine learning and are widely used in fields such as autonomous driving and language translations. Nevertheless, the tremendous capacity of convolutional neural networks makes it di...
In this study, changes in abiotic environmental factors were analyzed based on measured data from Dawangtan Reservoir in Nanning City during 2021–2022. The Carlson Integrated Trophic State Index method was applied to evaluate water quality and...
As China’s economy grows and travel demand increases, its aviation market has evolved to become the second-largest in the world. This study presents a pioneering analysis of China’s aviation network evolution (1990–2024) by integrat...
The distribution of atmospheric CO2 is not homogenous, primarily due to variations in the CO2 budgets of regional terrestrial ecosystems. To formulate a comprehensive strategy to combat the increasing global CO2 levels and associated warming, it is c...
6 January 2022
Soil erosion is serious in China—the soil in plateau and mountain areas contain a large of rock fragments, and their content and distribution have an important influence on soil erosion. However, there are still no complete results for calculat...
To explore the changes of leaf functional traits of Zanthoxylum planispinum ‘dintanensis’ with growth and development and its relationship with soil properties, which can clarify the response of the plantation to soil properties and suita...
Although parallel mechanisms are used in various fields, their application is often limited by singularities and a restricted workspace. Kinematic redundancy is a promising approach for mitigating these issues while also extending the functionality o...
The objective of this study was to investigate the influence of physico-chemical parameters on Actinomycetes communities and to prioritize those parameters that contributed to Actinomycetes community composition during the composting of agricultural...
To elucidate the structural characteristics and environmental drivers of plankton communities in alpine reservoirs, we examined phytoplankton and zooplankton in the Daqing Reservoir (China) across 13 sampling sites. Redundancy analysis (RDA) and Pear...
Self-supervised learning (SSL) has emerged as a promising paradigm for learning flexible speech representations from unlabeled data. By designing pretext tasks that exploit statistical regularities, SSL models can capture useful representations that...
Including redundancy is popular and widely used in a fault-tolerant method for memories. Effective fault-tolerant methods are a demand of today’s large-size memories. Recently, system-on-chips (SOCs) have been developed in nanotechnology, with...
In this study, the effect of different planting combinations on the amino acid concentration in the pericarp of Zanthoxylum planispinum ‘dintanensis’ (hereafter referred to as Z. planispinum) was studied, and the response of amino acid co...
Complex networks of stochastic processes are crucial for modeling the dynamics of interacting systems, particularly those involving high-order interactions (HOIs) among three or more components. Traditional measures—such as mutual information (...
This article contributes to clarifying the questions of whether and how fractal geometry, i.e., some of its main properties, are suitable to characterize architectural designs. This is done in reference to complexity-related aesthetic qualities in ar...
of 64