Skip to Content

62,383 Results Found

  • Article
  • Open Access
8 Citations
8,819 Views
16 Pages

Filtration Characterization Method as Tool to Assess Membrane Bioreactor Sludge Filterability—The Delft Experience

  • Maria Lousada-Ferreira,
  • Pawel Krzeminski,
  • Stefan Geilvoet,
  • Adrien Moreau and ,
  • Jose A. Gil,
  • Herman Evenblij,
  • Jules B. Van Lier and
  • Jaap H. J. M. Van der Graaf
  • + 3 authors+ 0 author

30 April 2014

Prevention and removal of fouling is often the most energy intensive process in Membrane Bioreactors (MBRs), responsible for 40% to 50% of the total specific energy consumed in submerged MBRs. In the past decade, methods were developed to quantify an...

  • Abstract
  • Open Access
974 Views
2 Pages

Synthesis and Characterization of In2O3-ZnO Nanostructures via the Precipitation Method

  • Alina Matei,
  • Oana Brincoveanu,
  • Cosmin Romanitan and
  • Vasilica Tucureanu

Nanocomposites, through their synergetic interaction between components, lead to integrated compatible structures, which opens new horizons for their application as materials in the realization of sensors. In2O3-ZnO, nanostructures exhibit a large ba...

(This article belongs to the Proceedings of The 3rd International Electronic Conference on Processes—Green and Sustainable Process Engineering and Process Systems Engineering)
  • Article
  • Open Access
8 Citations
5,660 Views
12 Pages

Isolation and Characterization of an Unknown Process-Related Impurity in Furosemide and Validation of a New HPLC Method

  • Ao Xu,
  • Yunlin Xue,
  • Yuyu Zeng,
  • Jing Li and ,
  • Huiling Zhou,
  • Zhen Wang,
  • Yin Chen,
  • Hui Chen,
  • Jian Jin and
  • Tao Zhuang
  • + 5 authors+ 0 author

Furosemide is a widely used loop diuretic in the treatment of congestive heart failure and edema. During the preparation of furosemide, a new process-related impurity G in the levels ranging from 0.08% to 0.13% was detected in pilot batches by a new...

(This article belongs to the Special Issue Advanced Analytical Tools for Characterization and Quality Control of Food, Drugs, and Natural Active Ingredients)
  • Article
  • Open Access
2 Citations
1,080 Views
16 Pages

Quantitative Characterization of Tensile Strength for Carburized Materials Using a Novel Composite Strength Method

  • Hongjun Wang,
  • Yanding Guo,
  • Shiqi Chen,
  • Xuming Zha and ,
  • Zejie Li and
  • Zhilong Xu
  • + 1 author+ 0 author

17 November 2025

Carburizing is a cost-effective surface hardening process that significantly enhances the strength of components and is widely used in critical parts such as main transmission gears and cams. However, research on mathematical models for characterizin...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
3 Citations
2,818 Views
10 Pages

Multi-Layer Material Characterization at Ka-Band Using Bayesian Inversion Method

  • Saleem Shahid,
  • Gian Guido Gentili,
  • Giancarlo Bernasconi,
  • Hamza Nawaz and
  • Ahsan S. Rana

This paper presents the implementation of the Bayesian inversion method for the characterization and estimation of different dielectric material properties. The scattering parameters of single and multi-layer materials are measured using a free-space...

(This article belongs to the Special Issue Disruptive Antenna Technologies Making 5G a Reality)
  • Article
  • Open Access
40 Citations
5,435 Views
17 Pages

Characterization and Prediction of Complex Natural Fractures in the Tight Conglomerate Reservoirs: A Fractal Method

  • Lei Gong,
  • Xiaofei Fu,
  • Shuai Gao,
  • Peiqiang Zhao and ,
  • Qingyong Luo,
  • Lianbo Zeng,
  • Wenting Yue,
  • Benjian Zhang and
  • Bo Liu
  • + 4 authors+ 0 author

2 September 2018

Using the conventional fracture parameters is difficult to characterize and predict the complex natural fractures in the tight conglomerate reservoirs. In order to quantify the fracture behaviors, a fractal method was presented in this work. Firstly,...

(This article belongs to the Special Issue Emerging Advances in Petrophysics: Porous Media Characterization and Modeling of Multiphase Flow)
  • Article
  • Open Access
13 Citations
2,916 Views
19 Pages

Optical Characterization of AsxTe100−x Films Grown by Plasma Deposition Based on the Advanced Optimizing Envelope Method

  • Dorian Minkov,
  • George Angelov,
  • Radi Nestorov,
  • Aleksey Nezhdanov and ,
  • Dmitry Usanov,
  • Mikhail Kudryashov and
  • Aleksandr Mashin
  • + 2 authors+ 0 author

3 July 2020

Three AsxTe100−x films with different x and dissimilar average thickness d ¯ are characterized mainly from one interference transmittance spectrum T(λ = 300 to 3000 nm) of such film on a substrate based on the advanced opt...

(This article belongs to the Special Issue Optical Characterization of Novel Composite and Optically Active Materials)
  • Article
  • Open Access
30 Citations
5,183 Views
12 Pages

14 April 2023

A mechanochemical approach was utilized to prepare modified kaolin, and the hydrophobic modification of kaolin was realized. The study aims to investigate the changes in particle size, specific surface area, dispersion ability, and adsorption perform...

  • Article
  • Open Access
15 Citations
3,889 Views
13 Pages

9 October 2018

Icing degree in the severe icing regions for years is an important factor considered in the anti-icing design of transmission lines. However, there is currently no normalized characterization method for the icing degree of transmission lines, which c...

  • Article
  • Open Access
38 Citations
12,342 Views
19 Pages

The global economy is using growing amounts of natural resources such as raw materials, water, and land by making and using goods, services, and infrastructure. Aspirations on international, regional, and national levels e.g., the Sustainable Develop...

  • Article
  • Open Access
2 Citations
3,504 Views
22 Pages

Piston ring–cylinder liner is one of the most important friction pairs in internal combustion engines. The surfaces of the piston ring and the cylinder liner are affected by high temperature and high pressure, and the influence mechanism of tem...

(This article belongs to the Special Issue Thermal Hydrodynamic Lubrication)
  • Article
  • Open Access
3 Citations
1,997 Views
25 Pages

Qualification and Implementation of a Robust Multi-Attribute Method Platform Across Multiple Laboratories for High-Resolution Process Characterization of Biopharmaceutical Products

  • François Griaud,
  • Patrick Sascha Merkle,
  • Joachim Ritter,
  • Victor Le-Minh and ,
  • Haiyan Zhang,
  • Maja Semanjski Curkovic,
  • Stefan Mittermayr,
  • Eva Kranjc,
  • Nina Pirher and
  • Thomas Pohl
  • + 17 authors+ 12 authors

24 July 2026

Background/Objectives: Process characterization (PC) of biopharmaceutical products is intended to identify critical process parameters (CPPs) based on their impact on critical quality attributes (CQAs), as well as to define acceptable process paramet...

(This article belongs to the Special Issue Characterization and Quality Control of Biopharmaceuticals Using the Multi-Attribute Method (MAM): Advantages and Challenges)
  • Article
  • Open Access
5 Citations
1,125 Views
18 Pages

19 August 2025

The operational performance of Flexible Hinge Piezoelectric Stages (FHPSs), essential components in precision engineering, is fundamentally constrained by the inherent hysteresis of the piezoelectric actuator (PEA). A significant deficiency in prevai...

(This article belongs to the Special Issue Piezoelectric Actuators and Motors: State-of-the-Art and Perspectives for Actuators)
  • Article
  • Open Access
1 Citations
842 Views
23 Pages

23 July 2026

Ultra-deep dolomite formations exhibit pronounced mechanical heterogeneity governed by mineral composition, inter-particle cementation, and observation scale, complicating their mechanical characterization. Because intact downhole cores are difficult...

(This article belongs to the Section Crystallography and Physical Chemistry of Minerals & Nanominerals)
  • Feature Paper
  • Article
  • Open Access
40 Citations
7,700 Views
24 Pages

A New Fast and Low-Cost Photogrammetry Method for the Engineering Characterization of Rock Slopes

  • Mirko Francioni,
  • Matteo Simone,
  • Doug Stead,
  • Nicola Sciarra and ,
  • Giovanni Mataloni and
  • Fernando Calamita
  • + 1 author+ 0 author

28 May 2019

Digital photogrammetry (DP) represents one of the most used survey techniques in engineering geology. The availability of new high-resolution digital cameras and photogrammetry software has led to a step-change increase in the quality of engineering...

(This article belongs to the Special Issue Remote Sensing of Engineering Geological Science)
  • Article
  • Open Access
1 Citations
1,142 Views
26 Pages

26 April 2026

In most amorphous materials, the concentration of Urbach tail states is larger than the concentration of dangling bond states. However, absorption accounting for the Urbach tail while disregarding the dangling bonds is commonly used or derived by spe...

(This article belongs to the Section Theory and Simulation of Nanostructures)
  • Article
  • Open Access
43 Citations
8,958 Views
18 Pages

26 June 2017

C-A-S-H (CaO-Al2O3-SiO2-H2O) and N-A-S-H (Na2O-Al2O3-SiO2-H2O) have a wide range of chemical compositions and structures and are difficult to separate from alkali-activated materials. Therefore, it is difficult to analyze their microscopic properties...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
9 Citations
2,847 Views
24 Pages

14 September 2024

Carbon fiber-reinforced polymer (CFRP), known for its light weight, high strength, and corrosion-resistant properties, is extensively used in the lightweight design of satellite components, the optimization of electronic device casings, and the proce...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
726 Views
24 Pages

25 February 2026

Polymer additives in well cement slurry filtrate would affect the stability of natural gas hydrate (NGH), which could lead to formation collapse and cause marine disasters. It is necessary to clarify the critical conditions for the stability of NGH,...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
2 Citations
3,848 Views
11 Pages

Detailed Characterization of a Fully Additive Covalent Bonded PCB Manufacturing Process (SBU-CBM Method)

  • Sarthak Acharya,
  • Shahid Sattar,
  • Shailesh Singh Chouhan and
  • Jerker Delsing

24 March 2022

To bridge the technology gap between IC-level and board-level fabrications, a fully additive selective metallization has already been demonstrated in the literature. In this article, the surface characterization of each step involved in the fabricati...

(This article belongs to the Section Materials Processes)
  • Review
  • Open Access
77 Citations
11,856 Views
30 Pages

14 March 2023

Due to the extremely high porosity and extremely low density of nano-porous thermal insulation materials, the characteristic size of the pores inside the materials and the characteristic size of the solid skeleton structure are on the nanometer scale...

(This article belongs to the Special Issue Current Research and Technological Advances on Aerogels)
  • Review
  • Open Access
46 Citations
17,849 Views
27 Pages

Microplastics in Water: A Review of Characterization and Removal Methods

  • Yun Li,
  • Ping Chen,
  • Yalan Tang,
  • Yanjing Yang and ,
  • Chengyun Zhou,
  • Jiaqi Bu and
  • Shian Zhong
  • + 2 authors+ 0 author

11 May 2024

Microplastics (MPs), as an emerging persistent pollutant, exist and accumulate in the environment, which has garnered them considerable global attention. While the origin, dispersion, distribution, and impact of MPs have been extensively documented,...

(This article belongs to the Section Sustainable Water Management)
  • Article
  • Open Access
1 Citations
1,259 Views
18 Pages

Application of Various Geophysical Methods in the Characterization of the Xiannüshan Fault Zone

  • Jingan Luo,
  • Song Lin,
  • Wenxiu Ding,
  • Cong Jin and ,
  • Miao Cheng,
  • Xiaohu Deng,
  • Yanlin Fu and
  • Hongwei Zhou
  • + 3 authors+ 0 author

6 January 2026

The Xiannüshan Fault Zone, located in the southwestern part of the Huangling Anticline within the Three Gorges Reservoir area of Hubei Province, is one of the largest and most complex faults in the region. The geological structures of its differ...

(This article belongs to the Special Issue State-of-the-Art Earth Sciences and Geography in China)
  • Review
  • Open Access
687 Views
29 Pages

A Review of Pore Structure Characterization Methods Utilized in Oil and Gas Carbonate Formations

  • Tao Long,
  • Yankun Sun,
  • Peng Peng,
  • Liangchang Zhou and ,
  • Tianyu Sun,
  • Chengjie Jin,
  • Junyuan Ding,
  • Xu Zhang and
  • Bowen Chen
  • + 4 authors+ 0 author

22 May 2026

Pore structure characterization is crucial for understanding fluid flow in porous media, including oil and gas reservoirs, aquifers, and geologic formations. Carbonate formations, prevalent in oil and gas reservoirs, pose challenges due to their comp...

  • Article
  • Open Access
26 Citations
3,466 Views
18 Pages

11 February 2021

Steel slag is the by-product of the steelmaking industry, the negative influences of which prompt more investigation into the recycling methods of steel slag. The purpose of this study is to characterize steel slag filler and study its feasibility of...

  • Review
  • Open Access
1 Citations
964 Views
39 Pages

11 February 2026

Wood–water interactions are a central focus in wood science, profoundly influencing wood’s physical, chemical, and mechanical properties. These interactions play a decisive role in wood processing, application, and durability. With scient...

  • Review
  • Open Access
649 Views
26 Pages

21 August 2026

Microwave dielectric characterization is essential for material evaluation, process monitoring, biomedical sensing, and nondestructive testing. This review critically evaluates planar microwave sensors for dielectric characterization, with the core s...

(This article belongs to the Special Issue Advances in Microwave and Millimeter-Wave Sensing)
  • Article
  • Open Access
171 Citations
61,692 Views
14 Pages

Gold Nanoparticles: A Didactic Step-by-Step of the Synthesis Using the Turkevich Method, Mechanisms, and Characterizations

  • Ana Elisa F. Oliveira,
  • Arnaldo César Pereira,
  • Mayra A. C. Resende and
  • Lucas Franco Ferreira

8 June 2023

In this study, gold nanoparticles (AuNPs) were synthesized using the Turkevich method. This article explains the didactic step-by-step synthesis, showing pictures of the entire process, including a well-explained mechanism and characterization study....

(This article belongs to the Section Electroanalysis)
  • Article
  • Open Access
2 Citations
3,160 Views
18 Pages

2 November 2022

Slope failures in roadway embankments are common occurrences and can lead to traffic disruptions and large costs to repair damage. In areas with high-plasticity clays, special attention must be paid to characterizing both the stratigraphy and the pot...

(This article belongs to the Section Natural Hazards)
  • Article
  • Open Access
1 Citations
978 Views
14 Pages

An Experimental Measurement Method to Characterize and Apply Platinum Silicon Material for a Biomechanical Replica of the Thoracic Aorta

  • Mario Alberto Grave-Capistrán,
  • Francesco Lamonaca,
  • Giuseppe Carbone and
  • Christopher René Torres-SanMiguel

Currently, silicone is a common material used in medical research and biomedical applications. This research aims to characterize extra-soft platinum silicone (shore A 00 50) and compare its mechanical behavior with that of the human thoracic aorta....

(This article belongs to the Topic Biomedical Engineering, Healthcare and Sustainability, 2nd Edition)
  • Article
  • Open Access
6 Citations
3,197 Views
19 Pages

The Role of Observation–Measurement Methods in the Surface Characterization of X39Cr13 Stainless-Steel Cutting Blades Used in the Fish Processing Industry

  • Wojciech Kapłonek,
  • Krzysztof Nadolny,
  • Bartosz Zieliński,
  • Jarosław Plichta and ,
  • Danil Yurievich Pimenov and
  • Shubham Sharma
  • + 1 author+ 0 author

18 December 2020

In the modern fish processing industry, flat fishes play an important role. They are processed into a final product in the form of a fillet during the skinning operation, which is carried out on machines operating in automated production lines. These...

(This article belongs to the Special Issue Precision and Ultra-Precision Subtractive and Additive Manufacturing Processes of Alloys and Steels)
  • Article
  • Open Access
11 Citations
4,286 Views
15 Pages

Quantitative Characterization of Passivation Process of Steel Reinforcement in Concrete towards Durability against Anticorrosion Based on Electrochemical Methods

  • Dongye Lv,
  • Hanbing Liu,
  • Qiang Miao,
  • Wensheng Wang and ,
  • Guojin Tan,
  • Chengwei Shi and
  • Hanjun Li
  • + 2 authors+ 0 author

4 February 2024

The passivation behavior of steel reinforcements in concrete is significantly influenced by the environment, concrete pore solution, and the passive film formed on the steel surface. The present study used electrochemical methods to successfully char...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
3 Citations
4,928 Views
13 Pages

Elastomer Characterization Method for Trapped Rubber Processing

  • Pooria Khalili,
  • Thomas Boulanger and
  • Brina J. Blinzler

19 March 2020

The increasing high-volume demand for polymer matrix composites (PMCs) brings into focus the need for autoclave alternative processing. Trapped rubber processing (TRP) of PMCs is a method capable of achieving high pressures during polymer matrix comp...

(This article belongs to the Special Issue Polymer Nanocomposite Interfaces; Fabrication, Properties and Simulations)
  • Article
  • Open Access
14 Citations
4,886 Views
12 Pages

An Efficient Method for LED Light Sources Characterization

  • Sara Raggiunto,
  • Alberto Belli,
  • Lorenzo Palma,
  • Piergiovanni Ceregioli and ,
  • Massimo Gattari and
  • Paola Pierleoni
  • + 1 author+ 0 author

25 September 2019

Digital LED drivers capable of blending the spectrum of two LED fixtures with different Correlated Color Temperatures through the LEDs’ power supply control are widespread. However, the digital control of lighting systems is possible only after a car...

(This article belongs to the Special Issue Latest Developments in LED Drivers)
  • Article
  • Open Access
38 Citations
7,507 Views
18 Pages

20 November 2020

Due to their abilities, multirotor unmanned aerial vehicles (UAVs) can be used in various missions that require complex and precise movements, so they are a typical representative of aerial robots. Since this type of UAV is characterized by high ener...

(This article belongs to the Section Aerospace Science and Engineering)
  • Review
  • Open Access
26 Citations
3,902 Views
24 Pages

In Situ Characterization Method to Reveal the Surface Reconstruction Process of an Electrocatalyst

  • Yiqin Zhan,
  • Tao Yang,
  • Shuang Liu,
  • Liming Yang and ,
  • Enhui Wang,
  • Xiangtao Yu,
  • Hongyang Wang,
  • Kuo-Chih Chou and
  • Xinmei Hou
  • + 4 authors+ 0 author

12 June 2025

Renewable energy-driven water electrolysis is widely regarded as a pivotal approach for achieving carbon-free hydrogen production. The development of highly efficient electrocatalysts is crucial to advancing the efficiency and scalability of electrol...

(This article belongs to the Section Environmental Nanoscience and Nanotechnology)
  • Abstract
  • Open Access
3 Citations
2,736 Views
2 Pages

Phlorotannins as Bioactive Agents from Brown Algae: Chemical Characterization and Extraction Methods

  • Camila F. Secco Bastos,
  • Maria Carpena,
  • Franklin Chamorro,
  • Rafael Nogueira-Marques and ,
  • Aurora Silva,
  • Maria Fátima Barroso,
  • Marlene Santos and
  • Miguel A. Prieto
  • + 3 authors+ 0 author

Marine organisms, especially brown seaweeds, have attracted a lot of attention worldwide because of their potential for use in treating a range of infectious and non-infectious diseases, being able to take part in the creation of medications and nutr...

(This article belongs to the Proceedings of The 3rd International Electronic Conference on Biomolecules)
  • Article
  • Open Access
24 Citations
9,698 Views
15 Pages

Investigation of Oxide Thickness on Technical Aluminium Alloys—A Comparison of Characterization Methods

  • Ralph Gruber,
  • Tanja Denise Singewald,
  • Thomas Maximilian Bruckner,
  • Laura Hader-Kregl and ,
  • Martina Hafner,
  • Heiko Groiss,
  • Jiri Duchoslav and
  • David Stifter
  • + 3 authors+ 0 author

24 July 2023

In this study the oxide layer of technical 6xxx aluminium surfaces, pickled as well as passivated, were comparatively investigated by means of transmission electron microscopy (TEM), Auger electron and X-ray photoelectron spectroscopy (AES, XPS), the...

(This article belongs to the Special Issue Special Metal-Alloy Coating and Catalysis)
  • Article
  • Open Access
7 Citations
3,143 Views
15 Pages

An NMR-Based Method for Multiphase Methane Characterization in Coals

  • Sijian Zheng,
  • Shuxun Sang,
  • Shiqi Liu,
  • Xin Jin and ,
  • Meng Wang,
  • Shijian Lu,
  • Guangjun Feng,
  • Yi Yang and
  • Jun Hou
  • + 4 authors+ 0 author

18 February 2022

Discriminating multiphase methane (adsorbed and free phases) in coals is crucial for evaluating the optimal gas recovery strategies of coalbed methane (CBM) reservoirs. However, the existing volumetric-based adsorption isotherm method only provides t...

(This article belongs to the Special Issue Advances in Methane Production from Coal, Shale and Other Tight Rocks)
  • Article
  • Open Access
3,247 Views
8 Pages

3 December 2021

As a kind of resonant device, the modulation efficiency of the photo-elastic modulator (PEM) is determined by its inherent resonance characteristics, including the resonance frequency and quality factor (Q-factor). The existing methods used to charac...

(This article belongs to the Section Engineering Optics)
  • Article
  • Open Access
5 Citations
3,268 Views
10 Pages

The purpose of this work is to give a first approach to the dynamical behavior of Schröder’s method, a well-known iterative process for solving nonlinear equations. In this context, we consider equations defined in the complex plane. By using topolog...

(This article belongs to the Special Issue Convergence and Dynamics of Iterative Methods: Chaos and Fractals)
  • Article
  • Open Access
7 Citations
3,085 Views
8 Pages

18 August 2022

The lack of tools particularly designed for the quantification of the fiber morphology in nonwovens, especially the multi-level structured fibers, is the main reason for the limited research studies on the establishment of realistic nonwoven structur...

(This article belongs to the Special Issue Smart Textile and Polymer Materials)
  • Article
  • Open Access
63 Citations
21,926 Views
15 Pages

Fast Characterization Method for Modeling Battery Relaxation Voltage

  • An Li,
  • Serge Pelissier,
  • Pascal Venet and
  • Philippe Gyan

After the end of a charging or discharging sequence, the battery voltage keeps evolving towards a finite value, during hours or even days, although no current is exchanged with the battery. This corresponds to the battery relaxation. In the context o...

(This article belongs to the Special Issue Battery Modeling)
  • Article
  • Open Access
1,833 Views
16 Pages

Characterization Method of Damage Information Based on Heterogeneous Network

  • Tong Huang,
  • Qinhe Gao,
  • Zhihao Liu,
  • Dong Wang and ,
  • Dong Ma and
  • Lei Gao
  • + 1 author+ 0 author

29 June 2023

Damage is the main form of conflict, and the characterization of damage information is an important component of conflict evaluation. In the existing research, damage mainly refers to the damage effect of a damage load on the target structure. Howeve...

(This article belongs to the Special Issue Advanced Sensing for Mechanical Vibration and Fault Diagnosis)
  • Article
  • Open Access
4 Citations
3,842 Views
17 Pages

1 March 2023

The design of a method to evaluate the efficacy of electroporation-treated (with several pulses) tissues is proposed. This method is based on the application of both the standard and a non-standard electrical characterization of biological tissues, o...

(This article belongs to the Section Bioengineering Design)
  • Article
  • Open Access
2 Citations
4,103 Views
15 Pages

Extended Natural Gas Characterization Method for Improved Predictions of Freeze-Out in LNG Production

  • Hassan A. Attalla,
  • Nour A. El-Emam,
  • Tarek M. Aboul-Fotouh and
  • Eric F. May

26 December 2022

The formation and the blockage of plant equipment such as heat exchangers by heavy hydrocarbon (HHC) solids is an inherent risk in cryogenic natural gas processing. The accuracy of the gas mixture’s compositional characterization significantly...

  • Article
  • Open Access
2 Citations
3,473 Views
26 Pages

4 September 2022

The increasing evolution of computing technologies has fostered the new intelligent concept of Ubiquitous computing (Ubicomp). Ubicomp environments encompass the introduction of new paradigms, such as Internet of Things (IoT), Mobile computing, and W...

(This article belongs to the Section Internet of Things)
  • Article
  • Open Access
6 Citations
2,207 Views
13 Pages

A Novel Method to Characterize the Damping Capacity of EPDM/CIIR Blends Using Vibrating Rubber Balls

  • Zhixin Liu,
  • Kai Wang,
  • Yongqiang Wu,
  • Hanxiao Zhang and ,
  • Tianyi Hao,
  • Hongyang Qi and
  • Bosong Liu
  • + 2 authors+ 0 author

21 May 2024

An experimental device fixed with a laser displacement sensor was assembled to investigate the rebound behaviors and damping mechanism of rubber balls prepared with ethylene-propylene-diene monomer (EPDM)/chlorinated butyl rubber (CIIR) blends. The r...

(This article belongs to the Special Issue Novel Nanoparticles and Their Enhanced Polymer Composites: 2nd Edition)
  • Proceeding Paper
  • Open Access
1,220 Views
8 Pages

20 November 2024

The conventional winding number method is extended in this research to characterize the nonlinear dynamical systems, especially in differentiating partially predictable chaos from strong chaos. On modern robotics’ challenges with increased degr...

(This article belongs to the Proceedings of 1st International Conference on Industrial, Manufacturing, and Process Engineering (ICIMP-2024))
  • Article
  • Open Access
2 Citations
5,709 Views
19 Pages

Opto-Acoustic Method for the Characterization of Thin-Film Adhesion

  • Sanichiro Yoshida,
  • David R. Didie,
  • Daniel Didie,
  • Tomohiro Sasaki and ,
  • Hae-Sung Park,
  • Ik-Keun Park and
  • David Gurney
  • + 2 authors+ 0 author

25 May 2016

The elastic property of the film-substrate interface of thin-film systems is characterized with an opto-acoustic method. The thin-film specimens are oscillated with an acoustic transducer at audible frequencies, and the resultant harmonic response of...

(This article belongs to the Special Issue Acoustic and Elastic Waves: Recent Trends in Science and Engineering)

of 1,248