Skip to Content

1,662 Results Found

  • Article
  • Open Access
1,271 Views
16 Pages

3 October 2025

In offshore drilling and geological exploration, the stability of jack-up rigs is predominantly determined by the bearing capacities of spudcan foundations during seabed penetration. The penetration depth of spudcans is relatively shallow in hard cla...

(This article belongs to the Section Geological Oceanography)
  • Article
  • Open Access
5 Citations
2,330 Views
17 Pages

28 April 2022

The content of natural methane in hard coal seams, called methane-bearing capacity, is the basic parameter that enables the level of methane hazard to be determined in hard coal mines. This parameter is also used to determine the potential quantities...

(This article belongs to the Topic Interdisciplinary Studies for Sustainable Mining)
  • Article
  • Open Access
72 Citations
9,137 Views
9 Pages

High Capacity and High Efficiency Maple Tree-Biomass-Derived Hard Carbon as an Anode Material for Sodium-Ion Batteries

  • Yuesheng Wang,
  • Zimin Feng,
  • Wen Zhu,
  • Vincent Gariépy and ,
  • Catherine Gagnon,
  • Manon Provencher,
  • Dharminder Laul,
  • René Veillette,
  • Michel L. Trudeau and
  • Karim Zaghib
  • + 6 authors+ 1 author

26 July 2018

Sodium-ion batteries (SIBs) are in the spotlight because of their potential use in large-scale energy storage devices due to the abundance and low cost of sodium-based materials. There are many SIB cathode materials under investigation but only a few...

(This article belongs to the Special Issue Electrode Materials for High Performance Sodium-ion Batteries)
  • Article
  • Open Access
7 Citations
2,663 Views
15 Pages

Tuning the Mesopore Structure of Polyethylene Glycol Terephthalate (PET)-Derived Hard Carbon for High-Capacity Sodium-Ion Batteries

  • Chupeng Wang,
  • Mingsheng Luo,
  • Shiqi Song,
  • Maochong Tang and ,
  • Xiaoxia Wang and
  • Hui Liu
  • + 1 author+ 0 author

5 March 2025

Hard carbon (HC) is considered to be a highly promising anode material for sodium-ion batteries. However, the synthesis conditions and pore structure regulation are still challenging for high-capacity sodium-ion storage. In this study, HCs using poly...

(This article belongs to the Section Energy Materials)
  • Feature Paper
  • Article
  • Open Access
25 Citations
8,926 Views
17 Pages

Properties of Tool Steels and Their Importance When Used in a Coated System

  • Bojan Podgornik,
  • Marko Sedlaček,
  • Borut Žužek and
  • Agnieszka Guštin

12 March 2020

The introduction of new light-weight high-strength materials, which are difficult to form, increases demands on tool properties, including load-carrying capacity and wear resistance. Tool properties can be improved by the deposition of hard coatings...

(This article belongs to the Special Issue Surface Topography Effects on Functional Properties of PVD Coatings)
  • Article
  • Open Access
22 Citations
3,912 Views
13 Pages

Phosphate-Induced Reaction to Prepare Coal-Based P-Doped Hard Carbon with a Hierarchical Porous Structure for Improved Sodium-Ion Storage

  • Limin Deng,
  • Yakun Tang,
  • Jingmei Liu,
  • Yue Zhang and ,
  • Wenjun Song,
  • Yuandong Li and
  • Lang Liu
  • + 2 authors+ 0 author

22 June 2023

The use of coal as a precursor for producing hard carbon is favored due to its abundance, low cost, and high carbon yield. To further optimize the sodium storage performance of hard carbon, the introduction of heteroatoms has been shown to be an effe...

(This article belongs to the Special Issue Advanced Electrode Materials for Electrochemical Energy Storage and Conversion)
  • Article
  • Open Access
16 Citations
5,445 Views
11 Pages

30 June 2025

Sodium-ion batteries (SIBs) have been considered as a promising alternative to lithium-ion batteries (LIBs) for large-scale energy storage. However, the commercial graphite anode is not suitable for SIBs due to its low Na+ ion storage capability. Cur...

(This article belongs to the Collection Micro/Nanoscale Electrokinetics)
  • Article
  • Open Access
20 Citations
6,791 Views
17 Pages

For the purpose of improving the working reliability of the blisk (integrally-bladed disk) under severe environment, a passive vibration reduction method by depositing a hard coating on both sides of blades is developed and then investigated systemat...

  • Feature Paper
  • Review
  • Open Access
20 Citations
5,667 Views
35 Pages

A Survey of Approximation Algorithms for the Universal Facility Location Problem

  • Hanyin Xiao,
  • Jiaming Zhang,
  • Zhikang Zhang and
  • Weidong Li

21 March 2025

The facility location problem is a classical combinatorial optimization problem with extensive applications spanning communication technology, economic management, traffic governance, and public services. The facility location problem is to assign a...

  • Article
  • Open Access
15 Citations
6,225 Views
18 Pages

This paper develops a damping strategy for the vibration reduction of a mistuned bladed disk (blisk) by depositing hard coating on its blades, and systematically investigates the vibration characteristics of the hard-coated mistuned (HCM) blisk. By u...

(This article belongs to the Special Issue Modelling and Simulation of Coating)
  • Article
  • Open Access
35 Citations
3,411 Views
24 Pages

Effective Range of FSSW Parameters for High Load-Carrying Capacity of Dissimilar Steel A283M-C/Brass CuZn40 Joints

  • Sabbah Ataya,
  • Mohamed M. Z. Ahmed,
  • Mohamed M. El-Sayed Seleman,
  • Khalil Hajlaoui and ,
  • Fahamsyah H. Latief,
  • Ahmed M. Soliman,
  • Yousef G. Y. Elshaghoul and
  • Mohamed I. A. Habba
  • + 3 authors+ 0 author

14 February 2022

In the current study, a 2 mm thick low-carbon steel sheet (A283M—Grade C) was joined with a brass sheet (CuZn40) of 1 mm thickness using friction stir spot welding (FSSW). Different welding parameters including rotational speeds of 1000, 1250,...

(This article belongs to the Special Issue Advance in Friction Stir Processed Materials)
  • Article
  • Open Access
3 Citations
1,772 Views
23 Pages

28 October 2024

User-perceived throughput is a novel performance metric attracting a considerable amount of recent attention because it characterizes the quality of the experience in mobile multimedia services. For instance, it gives a data rate of video streaming w...

(This article belongs to the Special Issue Advanced New Physical Layer Technologies for Next-Generation Wireless Communications)
  • Article
  • Open Access
7 Citations
2,892 Views
12 Pages

4 January 2022

The microstructure, revealed by X-ray diffraction and transmission Mössbauer spectroscopy, magnetization versus temperature, external magnetizing field induction and mechanical hardness of the as-quenched Fe75Zr4Ti3Cu1B17 amorphous alloy with tw...

(This article belongs to the Special Issue Structure, Magnetocaloric Properties, and Thermodynamic Modeling of Alloys)
  • Article
  • Open Access
34 Citations
12,126 Views
16 Pages

12 December 2018

Two prelithiation processes (shallow Li-ion insertion, and thrice-repeated deep Li-ion insertion and extraction) were applied to the hard carbon (HC) negative electrode (NE) used in lithium-ion batteries (LIBs). LIB full-cells were assembled using Li...

  • Article
  • Open Access
2 Citations
3,472 Views
23 Pages

Metallographic Study of Overlapped Laser Welds of Dissimilar Materials

  • Anna Guzanová,
  • Erik Janoško,
  • Dagmar Draganovská,
  • Ján Viňáš and ,
  • Miroslav Tomáš,
  • Janette Brezinová,
  • Silvia Maláková,
  • Miroslav Džupon and
  • Marek Vojtko
  • + 4 authors+ 0 author

9 October 2022

The paper deals with the metallographic analysis of overlapped laser welds of dissimilar materials based on galvanized and ungalvanized steels in various combinations. In addition to a gallery of metallographic sections, the paper presents the monito...

(This article belongs to the Special Issue Advanced Welding Technology in Metals II)
  • Article
  • Open Access
3 Citations
3,285 Views
19 Pages

Enhancing the Quality of Low-Salt Silver Carp (Hypophthalmichthys molitrix) Surimi Gel Using Psyllium Husk Powder: An Orthogonal Experimental Approach

  • Muhammad Safeer Abbas,
  • Lizhi Xia,
  • Qiang Li,
  • Yufeng Lu and ,
  • Songkun Liu,
  • Lin Lin and
  • Jianfeng Lu
  • + 2 authors+ 0 author

4 April 2024

Low-salt surimi production is crucial as it addresses health concerns related to sodium intake while maintaining the quality and shelf-life of seafood products. This research focused on optimizing the gelation conditions for silver carp surimi with t...

(This article belongs to the Special Issue Modification of Gels in Creating New Food Products)
  • Article
  • Open Access
20 Citations
3,567 Views
9 Pages

The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy

  • Ivana Ivanić,
  • Stjepan Kožuh,
  • Tamara Holjevac Grgurić,
  • Ladislav Vrsalović and
  • Mirko Gojić

28 February 2022

This paper discusses the effect of different heat treatment procedures on the microstructural characteristics, damping capacities, and mechanical properties of CuAlNi shape memory alloys (SMA). The investigation was performed on samples in the as-cas...

(This article belongs to the Special Issue Mechanical Behavior of Shape Memory Alloys: 2022)
  • Feature Paper
  • Article
  • Open Access
4 Citations
5,027 Views
14 Pages

23 July 2020

Bran friability (particle size distribution after milling) and water retention capacity (WRC) impact wheat bran functionality in whole grain milling and baking applications. The goal of this study was to identify genomic regions and underlying genes...

(This article belongs to the Special Issue Recent Advances in Genetics and Breeding of Major Staple Food Crops)
  • Article
  • Open Access
13 Citations
3,950 Views
16 Pages

Tissue Conditioner Incorporating a Nano-Sized Surface Pre-Reacted Glass-Ionomer (S-PRG) Filler

  • Watcharapong Tonprasong,
  • Masanao Inokoshi,
  • Muneaki Tamura,
  • Motohiro Uo and ,
  • Takahiro Wada,
  • Rena Takahashi,
  • Keita Hatano,
  • Makoto Shimizubata and
  • Shunsuke Minakuchi
  • + 4 authors+ 0 author

4 November 2021

We aimed to evaluate the properties of a novel tissue conditioner containing a surface pre-reacted glass-ionomer (S-PRG) nanofiller. Tissue conditioners containing 0 (control), 2.5, 5, 10, 20, or 30 wt% S-PRG nanofiller or 10 or 20 wt% S-PRG microfil...

(This article belongs to the Special Issue Anti-Infective Materials)
  • Article
  • Open Access
23 Citations
3,013 Views
18 Pages

Investigation on the Coaxial-Annulus-Argon-Assisted Water-Jet-Guided Laser Machining of Hard-to-Process Materials

  • Yuan Li,
  • Shuiwang Wang,
  • Ye Ding,
  • Bai Cheng and ,
  • Wanda Xie and
  • Lijun Yang
  • + 1 author+ 0 author

10 August 2023

In this study, the novel coaxial-annulus-argon-assisted (CAAA) atmosphere is proposed to enhance the machining capacity of the water-jet-guided laser (WJGL) when dealing with hard-to-process materials, including ceramic matrix composites (CMCs) and c...

(This article belongs to the Special Issue Laser Processing and Multi-Energy Field Manufacturing of High-Performance Materials)
  • Article
  • Open Access
9 Citations
2,275 Views
20 Pages

16 February 2023

Mine pressure at the working face is severe due to it being directly covered by a thick hard roof. To further investigate the technology of controlling the mine pressure of a thick hard roof, the upper working face of 13,121 in Gubei mine of Huainan...

(This article belongs to the Special Issue Mechanics, Damage Properties and Impacts of Coal Mining)
  • Article
  • Open Access
4 Citations
3,574 Views
13 Pages

The Effect of Hardwood Veneer Densification on Plywood Density, Surface Hardness, and Screw Withdrawal Capacity

  • Heikko Kallakas,
  • Tolgay Akkurt,
  • Alexander Scharf,
  • Fred Mühls and ,
  • Anti Rohumaa and
  • Jaan Kers
  • + 1 author+ 0 author

22 July 2024

Increasing environmental awareness and the carbon-storing capability of wood have amplified its relevance as a building material. The demand for high-quality wood species necessitates exploring alternative, underutilized wood sources due to limited f...

(This article belongs to the Section Wood Science and Forest Products)
  • Article
  • Open Access
3 Citations
2,763 Views
16 Pages

Buckling and Ultimate Bearing Capacity of Steel Pipes Jacked in Hard Rocks: A Case Study of a Water Pipeline Project in Zhongshan

  • Rusen Zhao,
  • Zhidong Chen,
  • Dinghua Feng,
  • Qiping Liu and ,
  • Peiwen Wen and
  • Hongwei Yang
  • + 1 author+ 0 author

24 October 2024

Steel jacking pipes are potentially prone to buckling instability, a phenomenon that has received limited attention in hard rock formations. This study reports on the field monitoring of a water pipeline project in Zhongshan City, where the circumfer...

(This article belongs to the Section Soil and Water)
  • Article
  • Open Access
515 Views
25 Pages

Evolution Mechanism and Bearing Capacity of End-Area Hanging Roofs in Thick Hard Roofs with Liquid Nitrogen Fracturing Control

  • Pengfei Shan,
  • Ke Yang,
  • Huicong Xu,
  • Gen Li and ,
  • Zheng Meng and
  • Bojia Xi
  • + 1 author+ 0 author

24 April 2026

To address severe strata pressure induced by large end-area hanging spans and poor caving of thick, hard roofs in western coal mines, this study takes the 1302 working face of Zhujiamao Coal Mine as a case study. A multiscale mechanical model is deve...

  • Article
  • Open Access
4 Citations
1,884 Views
17 Pages

Analysis of the Influence of Surrounding Rock State on Working Performance of Cutting Head in Metal Mining

  • Weipeng Xu,
  • Lirong Wan,
  • Kuidong Gao,
  • Yu Bu and ,
  • Meng Xu,
  • Shenghao Ma and
  • Kao Jiang
  • + 2 authors+ 0 author

29 December 2023

Continuous mining is one of the development goals for metal mines, and the application of coal mining equipment represented by shearers provides a reference for continuous mining. However, rock in metal mines is generally harder than coal, making cut...

(This article belongs to the Section Green Sustainable Science and Technology)
  • Article
  • Open Access
13 Citations
4,370 Views
15 Pages

18 May 2022

The effect of ultrasonic frequency mode (mono, dual and tri-frequency) and ultrasonic power (0–300 W) on structural properties (intrinsic fluorescence and sulfhydryl content) of whey protein was studied. Emulsions prepared with modified whey pr...

(This article belongs to the Special Issue Biopolymers: Structure-Function Relationship and Application)
  • Article
  • Open Access
10 Citations
3,530 Views
28 Pages

14 January 2021

The aim of the research was to develop an innovative technique in the seed production of red clover. The research was carried out in 2013–2016, in Felin (51°22′ N, 22°65′ E), in a dependent arrangement (split-split-plot) in...

(This article belongs to the Section Farming Sustainability)
  • Article
  • Open Access
26 Citations
12,326 Views
18 Pages

25 May 2020

The research was conducted in Karczemne Lake (area, 40.4 ha; maximum (max.) depth, 3.2 m) and Klasztorne Małe Lake (area, 13.7 ha; max. depth, 20.0 m) located in the Kashubian Lake District (Northern Poland). From the beginning of the 1950s, these re...

(This article belongs to the Special Issue Environmental Chemistry of Water Quality Monitoring)
  • Article
  • Open Access
5 Citations
2,010 Views
24 Pages

31 May 2025

The aim of this study was to evaluate the impact of microwave treatment on the physical properties and bioactive compound content of acorn flour and its subsequent effects on the quality of muffins. Acorn flour, both dry and hydrated (flour-to-water...

(This article belongs to the Section Food Science and Technology)
  • Article
  • Open Access
2 Citations
732 Views
11 Pages

15 December 2025

The exploration of chalcogenides is on the rise owing to their desirable optical, electronic, thermoelectric, and thermal properties. Chalcogenide materials have been investigated for possible applications in areas such as non-linear optics and solar...

(This article belongs to the Special Issue Surface Chemistry in Science and Industry)
  • Feature Paper
  • Article
  • Open Access
2 Citations
3,146 Views
12 Pages

Generating useful chemicals from CO2 is driving research into carbon capture and utilization. In this work, hard carbons are electrodeposited on various substrates from molten carbonate melts in CO2 atmospheres. These electrodeposited carbons are sub...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
2 Citations
2,655 Views
11 Pages

Modification of Cellulose by Esterification Crosslinking to Manipulate Its Microstructure for Enhanced Sodium Storage in Hard Carbon

  • Xingyun Zhang,
  • Yue Hu,
  • Yan Wang,
  • Ming Li and ,
  • Cuiying Lu,
  • Shixiong Sun and
  • Junwei Lang
  • + 2 authors+ 0 author

20 January 2025

The active hydroxyl group of cellulose plays a crucial role in regulating the microstructure of cellulose-derived hard carbon, which ultimately affects its sodium storage capacity. Through small-angle X-ray scattering (SAXS) and X-ray atomic pair dis...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
11 Citations
8,267 Views
11 Pages

Biomass-Derived Hard Carbon Materials for High-Performance Sodium-Ion Battery

  • Yixing Chen,
  • Jiaming Cui,
  • Sheng Wang,
  • Wentao Xu and
  • Ruoqi Guo

1 February 2025

Using biomass-derived hard carbon materials as anode materials for sodium-ion batteries has facilitated resource recycling and brought significant economic benefits. However, the main obstacles to the large-scale application of these materials are th...

  • Article
  • Open Access
9 Citations
4,576 Views
9 Pages

Tannin-Derived Hard Carbon for Stable Lithium-Ion Anode

  • Ming-Jun He,
  • Lai-Qiang Xu,
  • Bing Feng,
  • Jin-Bo Hu and ,
  • Shan-Shan Chang,
  • Gong-Gang Liu,
  • Yuan Liu and
  • Bing-Hui Xu
  • + 3 authors+ 0 author

18 October 2022

Graphite anodes are well established for commercial use in lithium-ion battery systems. However, the limited capacity of graphite limits the further development of lithium-ion batteries. Hard carbon obtained from biomass is a highly promising anode m...

(This article belongs to the Special Issue Innovative Materials for Energy Storage and Conversion)
  • Article
  • Open Access
35 Citations
7,398 Views
14 Pages

10 November 2023

Hard carbons are one of the most promising anode materials for next-generation sodium-ion batteries due to their high reversible capacity, long cycle life, and low cost. The advantage in terms of price of hard carbons can be further improved by using...

(This article belongs to the Special Issue Advances in Polymer Applied in Batteries and Capacitors)
  • Article
  • Open Access
19 Citations
4,166 Views
17 Pages

19 February 2025

Among the various contenders for next-generation sodium-ion battery anodes, hard carbons stand out for their notable reversible capacity, extended cycle life, and cost-effectiveness. Their economic advantage can be further enhanced by using inexpensi...

(This article belongs to the Special Issue Synthesis, Characterization and Applications of Electroactive Polymers: 2nd Edition)
  • Article
  • Open Access
9 Citations
4,811 Views
14 Pages

We investigated the changes in toxicity stress in goldfish, Carassius auratus, under exposure to different concentrations of Zn and water hardness for 14 days. We analyzed the changes in water hardness and Zn accumulation after exposure. To investiga...

(This article belongs to the Special Issue Oxidative Stress in Aquatic Organisms)
  • Article
  • Open Access
1 Citations
1,741 Views
15 Pages

Ultrafast Microwave-Assisted Resin Curing Forming a Dense Cross-Linked Network on Bamboo: Toward High-Performance Hard Carbon Anodes for Sodium-Ion Batteries

  • Ziming Liu,
  • Xiang Zhang,
  • Wanqian Li,
  • Min Li and ,
  • Gonggang Liu,
  • Jinbo Hu,
  • Binghui Xu,
  • Xianjun Li and
  • Hui Tong
  • + 4 authors+ 0 author

Resin curing coating is an effective approach to mitigate the intrinsic defects of lignocellulosic biomass-derived hard carbon, which facilitates its large-scale application in sodium-ion batteries due to their improved specific capacity, initial cou...

(This article belongs to the Special Issue Advanced Carbon-Based Materials for Next-Generation Batteries and Supercapacitors—2nd Edition)
  • Article
  • Open Access
4 Citations
3,345 Views
25 Pages

8 December 2023

Trails are important recreation settings; determining an appropriate trail usage amount to avoid unacceptable ecological impacts is important for protected areas. However, there is a lack of studies examining trail usage’s direct and indirect r...

(This article belongs to the Section Urban Forestry)
  • Article
  • Open Access
9 Citations
3,607 Views
12 Pages

A Multifunctional Coating on Sulfur-Containing Carbon-Based Anode for High-Performance Sodium-Ion Batteries

  • Lin Zhu,
  • Bo Yin,
  • Yuting Zhang,
  • Qian Wu and ,
  • Hongqiang Xu,
  • Haojie Duan,
  • Meiqin Shi and
  • Haiyong He
  • + 3 authors+ 0 author

10 April 2023

A sulfur doping strategy has been frequently used to improve the sodium storage specific capacity and rate capacity of hard carbon. However, some hard carbon materials have difficulty in preventing the shuttling effect of electrochemical products of...

(This article belongs to the Special Issue Frontier in Lithium-Ion Battery)
  • Article
  • Open Access
184 Views
37 Pages

20 October 2026

Edge–cloud task scheduling reserves uplink capacity before the wireless service state is known. The reserve depends on both the probability law over a prescribed service-state library and the geometry representing that library. This study separ...

(This article belongs to the Special Issue Optimization and Resource Allocation in Cloud and Edge Computing)
  • Article
  • Open Access
3 Citations
1,391 Views
16 Pages

25 January 2026

Hard carbon is widely recognized as a viable anode candidate for sodium-ion batteries (SIBs) owing to its electrochemical advantages, yet simultaneously enhancing specific capacity and rate capability, arising from insufficient plateau capacity, rema...

(This article belongs to the Special Issue Electrode Materials Design for High-Performance Energy Conversion and Storage Devices)
  • Article
  • Open Access
11 Citations
4,972 Views
10 Pages

Coconut-Solid-Waste-Derived Hard-Carbon Anode Materials for Fast Potassium Ion Storage

  • Yi Ma,
  • Wenhao Liu,
  • Wenhan Liu,
  • Guangwan Zhang and ,
  • Yu Wang,
  • Haokai Wang,
  • Wei Chen,
  • Meng Huang and
  • Xuanpeng Wang
  • + 4 authors+ 0 author

6 February 2024

Hard carbon, which features recyclability, low costs, and environmental friendliness, is an attractive anode material for K+ storage. Nevertheless, the state-of-the-art hard carbon is still unsatisfactory due to its poor multiplication performance an...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
25 Citations
6,902 Views
18 Pages

On the Road to Sustainable Energy Storage Technologies: Synthesis of Anodes for Na-Ion Batteries from Biowaste

  • Nekane Nieto,
  • Olatz Noya,
  • Amaia Iturrondobeitia,
  • Paula Sanchez-Fontecoba and ,
  • Usue Pérez-López,
  • Verónica Palomares,
  • Alexander Lopez-Urionabarrenechea and
  • Teófilo Rojo
  • + 3 authors+ 0 author

Hard carbon is one of the most promising anode materials for sodium-ion batteries. In this work, new types of biomass-derived hard carbons were obtained through pyrolysis of different kinds of agro-industrial biowaste (corncob, apple pomace, olive mi...

(This article belongs to the Topic Optimisation, Optimal Control and Nonlinear Dynamics in Electrical Power, Energy Storage and Renewable Energy Systems)
  • Article
  • Open Access
3 Citations
1,547 Views
15 Pages

20 October 2025

Tourism performance often depends on the joint provision of built (“hard”) and environmental (“green”) infrastructure, yet their combined effects are not well established. Using official data for Saudi Arabia’s 13 region...

(This article belongs to the Section Sustainable Transportation)
  • Article
  • Open Access
10 Citations
2,524 Views
13 Pages

Shredded-Coconut-Derived Sulfur-Doped Hard Carbon via Hydrothermal Processing for High-Performance Sodium Ion Anodes

  • Yuanfeng Liu,
  • Shuai Chen,
  • Chengzhi Zhang,
  • Guochun Li and ,
  • Junfeng Liu and
  • Yong Wang
  • + 1 author+ 0 author

The extensive use of sodium-ion batteries has made it important to develop high-performance anode materials. Owing to their good sustainability, low cost, and excellent electrochemical properties, hard carbon materials are expected to be a good choic...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
1 Citations
4,036 Views
25 Pages

25 September 2025

This study presents a multiphysics simulation approach to optimize graphite-buffered bilayer anodes for enhanced energy density in lithium-ion batteries, assessing the electrochemical impact of diverse inner-layer materials, including silicon, hard c...

  • Article
  • Open Access
14 Citations
4,118 Views
12 Pages

15 June 2022

To investigate the alternatives to lithium-ion batteries, potassium-ion batteries have attracted considerable interest due to the cost-efficiency of potassium resources and the relatively lower standard redox potential of K+/K. Among various alternat...

(This article belongs to the Topic Electromaterials for Environment & Energy)
  • Review
  • Open Access
20 Citations
4,567 Views
20 Pages

13 May 2025

Sodium-ion batteries (SIBs) have emerged as a viable alternative to lithium-ion technologies, with carbon-based anodes playing a pivotal role in addressing key challenges of sodium storage. This review systematically examines hard carbon as the premi...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
31 Citations
11,612 Views
10 Pages

Sosnowskyi Hogweed-Based Hard Carbons for Sodium-Ion Batteries

  • Grigorii P. Lakienko,
  • Zoya V. Bobyleva,
  • Maria O. Apostolova,
  • Yana V. Sultanova and ,
  • Andrey K. Dyakonov,
  • Maxim V. Zakharkin,
  • Nikita A. Sobolev,
  • Anastasia M. Alekseeva,
  • Oleg A. Drozhzhin and
  • Evgeny V. Antipov
  • + 6 authors+ 1 author

20 September 2022

Sodium-ion battery technology rapidly develops in the post-lithium-ion landscape. Among the variety of studied anode materials, hard carbons appear to be the realistic candidates because of their electrochemical performance and relative ease of produ...

(This article belongs to the Special Issue Lithium-Ion Batteries and Beyond: Outlook on Present and Future)

of 34