Skip to Content

46 Results Found

  • Article
  • Open Access
1 Citations
628 Views
25 Pages

8 January 2026

This study considers the dynamic stability of a three-layered annular plate, whose facings are made of functionally graded material in the radial direction. The plate is subjected to linearly increasing in-plane forces applied at either the inner or...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
12 Citations
3,097 Views
23 Pages

Engineering of a FGM Interlayer to Reduce the Thermal Stresses Inside the PFCs

  • Giacomo Dose,
  • Selanna Roccella and
  • Francesco Romanelli

11 October 2022

A substantial contribution of the stresses that arise inside the Plasma-Facing Components (PFCs) when a heat load is applied is caused by the mismatch of the Coefficient of Thermal Expansion (CTE) between the armor, usually made of tungsten (W), and...

(This article belongs to the Special Issue New Challenges in Nuclear Fusion Reactors: From Data Analysis to Materials and Manufacturing)
  • Article
  • Open Access
3 Citations
2,838 Views
15 Pages

Grain Orientation and Hardness in the Graded Interlayer of Plasma Sprayed W on CuCrZr

  • Marcello Cabibbo,
  • Alessandra Fava,
  • Roberto Montanari,
  • Ekaterina Pakhomova and ,
  • Chiara Paoletti,
  • Maria Richetta and
  • Alessandra Varone
  • + 2 authors+ 0 author

10 February 2022

In this work a W coating was deposited through PS in Ar-H2 atmosphere on a substrate of CuCrZr with an interlayer consisting of gradually changing fractions of Cu and W. The W coating and the interlayer showed good adhesion and no cracks were observe...

(This article belongs to the Special Issue New Challenges in Nuclear Fusion Reactors: From Data Analysis to Materials and Manufacturing)
  • Article
  • Open Access
9 Citations
4,304 Views
25 Pages

29 October 2023

The friction clutch design strongly depends upon the frictional heat generated between contact surfaces during slipping at the beginning of the engagement. Firstly, the frictional heat generated reduces the performance of the clutch system and then l...

(This article belongs to the Section Mechanical Engineering Design)
  • Article
  • Open Access
9 Citations
3,454 Views
22 Pages

MulTi-FAST: A Machinability Assessment of Functionally Graded Titanium Billets Produced from Multiple Alloy Powders

  • Oliver Levano Blanch,
  • Daniel Suárez Fernández,
  • Alex Graves and
  • Martin Jackson

30 April 2022

Technological developments in the area of functionally graded multi-material manufacture are poised to disrupt the aerospace industry, providing the means for step-change improvements in performance through tailored component design. However, the cha...

(This article belongs to the Special Issue Machining and Machinability of Advanced Materials and Composites)
  • Proceeding Paper
  • Open Access
1,133 Views
7 Pages

FGM Sandwich Curved Beam Under Thermomechanical Loads for Hydrogen Mechanical Applications

  • Dimitrios A. Mallios,
  • Efstathios E. Theotokoglou and
  • Constantinos Chr. Koutsoumaris

29 December 2025

In this study, a curved sandwich beam with Functionally Graded Materials (FGM) face sheets and a homogeneous core under thermomechanical loads is investigated. The problem is studied numerically by the finite element method (FEM). Plane, eight nodes...

(This article belongs to the Proceedings of The 8th International Conference of Engineering Against Failure)
  • Article
  • Open Access
5 Citations
2,442 Views
21 Pages

5 December 2022

In this work, the first shear deformation theory (FSDT) is used for the thermo-mechanical analysis of a simply supported five-layer functionally Graded (FG) sandwich plate resting on a Winkler elastic foundation. The sandwich plate consists of five l...

(This article belongs to the Special Issue Multifunctional Composites, Volume II)
  • Review
  • Open Access
336 Citations
31,001 Views
19 Pages

A major advantage of additive manufacturing (AM) technologies is the ability to print customized products, which makes these technologies well suited for the orthopedic implants industry. Another advantage is the design freedom provided by AM technol...

  • Article
  • Open Access
13 Citations
2,594 Views
22 Pages

26 November 2024

This paper presents numerical investigations into the free vibration properties of a sandwich composite plate with two fiber-reinforced plastic (FRP) face sheets and a functionally graded carbon nanotube-reinforced composite (FG-CNTRC) core made of f...

(This article belongs to the Special Issue Advances in Marine Mechanical and Structural Engineering—2nd Edition)
  • Article
  • Open Access
430 Views
19 Pages

19 August 2026

Homogeneous TC4 titanium alloy suffers from the strength–ductility trade-off and exhibits insufficient anti-penetration capacity under high-strain-rate impact. TiCp-reinforced functionally graded titanium matrix composites (FGTMCs) with a &ldqu...

(This article belongs to the Topic Advanced Composite Materials)
  • Review
  • Open Access
62 Citations
6,756 Views
22 Pages

Multimetal Research in Powder Bed Fusion: A Review

  • Liming Yao,
  • Aditya Ramesh,
  • Zhongmin Xiao,
  • Yang Chen and
  • Quihui Zhuang

9 June 2023

This article discusses the different forms of powder bed fusion (PBF) techniques, namely laser powder bed fusion (LPBF), electron beam powder bed fusion (EB-PBF) and large-area pulsed laser powder bed fusion (L-APBF). The challenges faced in multimet...

(This article belongs to the Special Issue 3D & 4D Printing in Engineering Applications)
  • Article
  • Open Access
1,234 Views
11 Pages

Transverse Compression of a Thin Inhomogeneous Elastic Layer

  • Ahmed S. M. Alzaidi,
  • Julius Kaplunov,
  • Barbara Zupančič and
  • Anatolij Nikonov

13 August 2024

A 3D problem in linear elasticity is considered for a thin inhomogeneous layer subject to transverse compression. For the first time, the effect of arbitrary vertical inhomogeneity is elucidated. Two sets of boundary conditions along the faces of the...

  • Article
  • Open Access
7 Citations
4,591 Views
20 Pages

Comparative Evaluation of the Powder and Tableting Properties of Regular and Direct Compression Hypromellose from Different Vendors

  • Nihad Mawla,
  • Maen Alshafiee,
  • John Gamble,
  • Mike Tobyn and ,
  • Lande Liu,
  • Karl Walton,
  • Barbara R. Conway,
  • Peter Timmins and
  • Kofi Asare-Addo
  • + 4 authors+ 0 author

Hypromellose, a widely used polymer in the pharmaceutical industry, is available in several grades, depending on the percentage of substitution of the methoxyl and hydroxypropyl groups and molecular weight, and in various functional forms (e.g., suit...

(This article belongs to the Collection Feature Papers in Pharmaceutical Technology)
  • Article
  • Open Access
2 Citations
3,030 Views
23 Pages

Simulation of the Influence of the Radial Graded Porosity Distribution on Elastic Modulus of γ/β Phase Ti-Based Alloy Foams for Bone Implant

  • Claudio Aguilar,
  • Ismelí Alfonso,
  • Daniel González,
  • Edgar Pio and ,
  • Guilherme Oliveira Neves,
  • Flavio De Barbieri,
  • Mamie Sancy and
  • Lisa Muñoz
  • + 3 authors+ 0 author

24 November 2023

This research aims to examine how a radial graded porosity distribution affects the elastic modulus by conducting simulations on Ti-based alloy foams with face-centered cubic and body-centered cubic crystal structures. Four types of foams were analyz...

(This article belongs to the Section Porous Materials)
  • Article
  • Open Access
95 Views
28 Pages

12 November 2026

Porous functionally graded material (FGM) sandwich beams combine ceramic heat resistance with metal toughness, but their through-thickness grading and porosity make their response in thermal environments sensitive to modelling assumptions. This paper...

(This article belongs to the Section Materials Simulation and Design)
  • Article
  • Open Access
6 Citations
2,565 Views
35 Pages

26 April 2023

This article investigates the static analysis of functionally graded electromagnetic nanocomposite sandwich plates reinforced with graphene platelets (GPLs) under hygrothermal loads. The upper and lower layers of nanocomposite face sheets are made of...

(This article belongs to the Section E2: Control Theory and Mechanics)
  • Article
  • Open Access
3 Citations
5,107 Views
27 Pages

28 February 2021

Tessellating a periodic unit cell of lattice material to fill a design space in complex geometries has many challenges arising from their computer-aided design (CAD) modeling intricacy. A solution to this difficulty is the use of trimmed micro-truss...

  • Article
  • Open Access
13 Citations
3,328 Views
15 Pages

GAM: General Auxetic Metamaterial with Tunable 3D Auxetic Behavior Using the Same Unit Cell Boundary Connectivity

  • Ismael Ben-Yelun,
  • Guillermo Gómez-Carano,
  • Francisco J. San Millán,
  • Miguel Ángel Sanz and ,
  • Francisco Javier Montáns and
  • Luis Saucedo-Mora
  • + 1 author+ 0 author

29 April 2023

Research on auxetic metamaterials is important due to their high performance against impact loadings and their usefulness in actuators, among other applications. These metamaterials offer a negative Poisson’s ratio at the macro level. However,...

(This article belongs to the Special Issue Mechanical Metamaterials: Optimization and New Design Ideas)
  • Review
  • Open Access
106 Citations
13,531 Views
33 Pages

20 February 2023

Multi-material structure fabrication has the potential to address some critical challenges in today’s industrial paradigm. While conventional manufacturing processes cannot deliver multi-material structures in a single operation, additive manuf...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
2 Citations
718 Views
22 Pages

10 December 2025

This study presents a modification strategy to fabricate core–shell composite aggregates from reclaimed asphalt pavement (RAP), aligning with green chemistry principles for waste valorization. The method involves creating a porous cementitious...

(This article belongs to the Special Issue Recent Advances in Porous Materials: Simulation, Design, Synthesis, Properties, Applications)
  • Review
  • Open Access
351 Views
87 Pages

29 October 2026

Functionally Graded Metamaterials (FGMMs) refer to new categories of materials whose design through variation in composition and geometry leads to the attainment of properties that cannot be realized using regular materials. The use of additive manuf...

(This article belongs to the Section Composites Manufacturing and Processing)
  • Article
  • Open Access
4 Citations
3,214 Views
17 Pages

Processing and Properties of Tungsten-Steel Composites and FGMs Prepared by Spark Plasma Sintering

  • Jiří Matějíček,
  • Radek Mušálek,
  • Zdeněk Dlabáček,
  • Veronika Klevarová and
  • Lenka Kocmanová

17 December 2022

Tungsten is the prime candidate material for the plasma-facing components of fusion reactors. For the joining of tungsten armor to the cooling system or support structure, composites or graded interlayers can be used to reduce the stress concentratio...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
14 Citations
3,248 Views
16 Pages

18 June 2021

A refined beam theory that takes the thickness-stretching into account is presented in this study for the bending vibratory behavior analysis of thick functionally graded (FG) beams. In this theory, the number of unknowns is reduced to four instead o...

(This article belongs to the Special Issue Mathematical Problems in Materials Science)
  • Article
  • Open Access
13 Citations
2,859 Views
21 Pages

This study is centered on examining the static bending behavior of sandwich plates featuring functionally graded materials, specifically addressing distinct representations of porosity distribution across their thickness. The composition of the sandw...

  • Review
  • Open Access
18 Citations
1,187 Views
30 Pages

Research Progress in Field Grading Materials for New Power Systems

  • Peng Han,
  • Zheng Zhang,
  • Jiayang Li,
  • Geng Li and ,
  • Hailong Zhang,
  • Yurong Shi,
  • Kehan Xu,
  • Shiquan Guo,
  • Dongli Zhang and
  • Chen Zhao
  • + 5 authors+ 0 author

With the rapid construction of new power systems characterized by high renewable energy penetration, high power electronics integration, and high voltage levels, the insulation reliability of critical power equipment—including cable accessories...

(This article belongs to the Topic Functional Materials: Cross-Scale Innovations from Molecular Design to Macroscopic Applications)
  • Review
  • Open Access
81 Citations
12,406 Views
42 Pages

10 June 2025

Non-destructive testing (NDT) and non-destructive evaluation (NDE) are essential tools for ensuring the structural integrity, safety, and reliability of critical systems across the aerospace, civil infrastructure, energy, and advanced manufacturing s...

(This article belongs to the Special Issue Digital Image Processing and Sensing Technologies—Second Edition)
  • Review
  • Open Access
1 Citations
2,894 Views
22 Pages

Facial Paralysis Treatment and Facial Symmetrization with Botulinum Neurotoxin: A Narrative Review with Illustrative Clinical Cases

  • Monica Renga,
  • Roberta D’Emilio,
  • Giovanni Salti,
  • Selene Mogavero and ,
  • Marco Papagni,
  • Federico Biglioli and
  • Alessandro Lozza
  • + 2 authors+ 0 author

4 June 2026

Facial paralysis leads to static and dynamic asymmetry, hyperkinesis of the non-paralyzed side, and synkinesis, with major functional and psychosocial consequences for patients. Botulinum neurotoxin serotype A (BoNT-A) injections are an effective the...

(This article belongs to the Special Issue Study on Botulinum Toxin in Facial Diseases and Aesthetics)
  • Feature Paper
  • Review
  • Open Access
20 Citations
7,448 Views
40 Pages

A Review on the Additive Manufacturing of W-Cu Composites

  • Muhammad Hussain,
  • Bosheng Dong,
  • Zhijun Qiu,
  • Ulf Garbe and ,
  • Zengxi Pan and
  • Huijun Li
  • + 1 author+ 0 author

13 February 2025

In recent years, W-Cu composite systems have become very interesting subjects due to good electrical and thermal conductivity, high-temperature strength, certain plasticity, and excellent radiation resistance. W-Cu composites are a very important cla...

(This article belongs to the Section Welding and Joining)
  • Article
  • Open Access
17 Citations
4,091 Views
24 Pages

Quality Evaluation of Public Spaces in Traditional Villages: A Study Using Deep Learning and Panoramic Images

  • Shiyu Meng,
  • Chenhui Liu,
  • Yuxi Zeng,
  • Rongfang Xu and ,
  • Chaoyu Zhang,
  • Yuke Chen,
  • Kechen Wang and
  • Yunlu Zhang
  • + 3 authors+ 0 author

29 September 2024

In the context of rapid urbanization, public spaces in traditional villages face challenges such as material ageing, loss of characteristics, and functional decline. The scientific and objective assessment of the quality of these public spaces is cru...

  • Article
  • Open Access
3 Citations
1,046 Views
17 Pages

31 July 2025

Functionally graded materials (FGMs) have the potential to revolutionize the oil and gas transportation sector, due to their increased strengths and efficiencies as pipelines. Conventional pipelines frequently face serious problems such as extreme we...

  • Article
  • Open Access
4 Citations
1,545 Views
27 Pages

Performance and Mechanism Analysis of an Anti-Skid Wear Layer of Active Slow-Release Ice–Snow Melting Modified by Gels

  • Yuanzhao Chen,
  • Zhenxia Li,
  • Tengteng Guo,
  • Chenze Fang and ,
  • Peng Guo,
  • Chaohui Wang,
  • Bing Bai,
  • Weiguang Zhang,
  • Haobo Yan and
  • Qi Chen
  • + 5 authors+ 0 author

11 June 2025

Winter pavement maintenance faces challenges in balancing large-scale upkeep and driving safety, particularly regarding the application of active slow-release materials. This study proposes a gel-modified salt-storing ceramsite asphalt mixture to enh...

(This article belongs to the Special Issue Synthesis, Properties, and Applications of Novel Polymer-Based Gels)
  • Review
  • Open Access
757 Views
28 Pages

28 August 2026

Lightweight and high-strength sandwich panels are used across aerospace, transportation, marine, energy, civil and protective systems because large face separation can provide high flexural rigidity and specific load capacity at low mass. This review...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
5 Citations
2,902 Views
13 Pages

9 September 2022

In conventional piezoelectric ceramics, their brittle nature and containing lead are two crucial issues that significantly restrict their uses in many applications such as biomedical devices. In this work, we suggest the use of an eco-friendly piezoe...

(This article belongs to the Section Actuator Materials)
  • Article
  • Open Access
12 Citations
2,748 Views
31 Pages

27 December 2022

Due to the high importance of viscoelastic materials in modern industrial applications, besides the intensive popularity of piezoelectric smart structures, analyzing their thermoelastic response in extreme temperature conditions inevitably becomes ve...

(This article belongs to the Topic Piezoelectric Materials and Applications)
  • Article
  • Open Access
23 Citations
3,428 Views
23 Pages

20 July 2022

The combination of auxetic honeycomb and CNT reinforcement composite is expected to further improve the impact protection performance of sandwich structures. This paper studies the low-velocity impact response of sandwich plates with functionally gra...

(This article belongs to the Special Issue Advances in Functional Rubber and Elastomer Composites)
  • Communication
  • Open Access
4 Citations
1,604 Views
13 Pages

Multiscale Finite Element Analysis of Warping Suppression in Microelectronics with Graded SiC/Al Composites

  • Junfeng Zhao,
  • Junliang Zhang,
  • Hao Su,
  • Yu Zhang and ,
  • Kai Li,
  • Haijuan Mei,
  • Changwei Wu,
  • Qingfeng Zhu and
  • Weiping Gong
  • + 4 authors+ 0 author

12 August 2025

High-power microelectronic packaging faces critical thermomechanical failures under rapid thermal cycling, primarily due to interfacial stress concentration and warping in conventional homogeneous heat sinks. To address this challenge, this study pro...

(This article belongs to the Special Issue Advanced Electronic Packaging Technology: From Hard to Soft (Second Edition))
  • Article
  • Open Access
17 Citations
3,392 Views
18 Pages

11 February 2022

This paper conducted the free vibration analysis of a sandwich annular thin plate with whirl motion. The upper and lower faces of the annular plate are made of uniform solid metal, while its core is porous foamed metal reinforced by graphene nanoplat...

(This article belongs to the Section Smart and Functional Materials)
  • Article
  • Open Access
8 Citations
2,215 Views
19 Pages

Simulation and Study of Manufacturing of W–Cu Functionally Graded Materials by a Selective Laser Melting Process

  • Xiaoyu Ding,
  • Di Ma,
  • Yuecheng Fu,
  • Laima Luo and ,
  • Yucheng Wu and
  • Jianhua Yao
  • + 1 author+ 0 author

11 December 2024

Plasma-facing components (PFCs) were simulated by ANSYS, and the influence of gradient layer number and composition distribution index on the distribution of temperature field and stress field was analyzed. The simulation results show that a gradient...

  • Article
  • Open Access
1 Citations
1,890 Views
12 Pages

Study on the Electric Field Distribution Characteristics of 66 kV Dry-Type Transformer Based on Functional Graded Material (FGM) Treatment

  • Xinhan Qiao,
  • Zishang Zhu,
  • Yuchang Zhang,
  • Le Yu and ,
  • Dongdong Zhang,
  • Jianwen Zhang,
  • Xinxi Di,
  • Yijiao Wang and
  • Wengtian Zeng
  • + 4 authors+ 0 author

19 November 2024

Functional graded materials (FGMs) have been successfully applied for improving the insulation performance of insulators, yet there is currently no relevant literature on their application in dry-type transformers. Therefore, it is meaningful to stud...

(This article belongs to the Section F6: High Voltage)
  • Article
  • Open Access
2 Citations
6,120 Views
19 Pages

28 October 2022

Teachers’ professional development is now widely regarded as a key determinant of school effectiveness and student achievement. However, Mathematics teachers in Vietnamese secondary schools face numerous challenges in their teaching practices,...

  • Feature Paper
  • Article
  • Open Access
96 Citations
6,596 Views
18 Pages

Rheological Behavior and Sensitivity of Wood-Derived Bio-Oil Modified Asphalt Binders

  • Junfeng Gao,
  • Hainian Wang,
  • Zhanping You,
  • Mohd Rosli Mohd Hasan and ,
  • Yong Lei and
  • Muhammad Irfan
  • + 1 author+ 0 author

3 June 2018

The demand for bituminous materials is continuously growing; crude oil-based asphalt binders are non-renewable, and are facing rapid depletion. With the increase of petroleum-based asphalt prices, seeking an alternative, renewable material such as bi...

(This article belongs to the Special Issue Achievements and Prospects of Advanced Pavement Materials Technologies)
  • Review
  • Open Access
32 Citations
6,628 Views
20 Pages

3 August 2025

Cultured meat is emerging as a sustainable alternative to conventional animal agriculture, with scaffolds playing a central role in supporting cellular attachment, growth, and tissue maturation. This review focuses on the development of gel-based hyb...

(This article belongs to the Special Issue Food Hydrocolloids and Hydrogels: Rheology and Texture Analysis)
  • Article
  • Open Access
403 Views
15 Pages

An Analytical Model of Local Buckling for Rectangular Concrete-Filled Steel Tube Columns Under Biaxial Eccentric Compression

  • Jun Wan,
  • Jian Cai,
  • Qingjun Chen,
  • Zhiliang Zuo and ,
  • Zhijie Xie and
  • Wentao Li
  • + 1 author+ 0 author

3 August 2026

Concrete-filled steel tube (CFT) columns have been widely used in high-rise buildings and bridge structures due to their excellent composite performance. In practical applications, CFT columns inevitably experience eccentric loading due to structural...

(This article belongs to the Special Issue Research on Low-Carbon High-Performance Concrete Materials and Structures)
  • Article
  • Open Access
8 Citations
3,695 Views
28 Pages

ARPocketLab—A Mobile Augmented Reality System for Pedagogic Applications

  • Miguel Nunes,
  • Telmo Adão,
  • Somayeh Shahrabadi,
  • António Capela and ,
  • Diana Carneiro,
  • Pedro Branco,
  • Luís Magalhães,
  • Raul Morais and
  • Emanuel Peres
  • + 4 authors+ 0 author

The widespread adoption of digital technologies in educational systems has been globally reflecting a shift in pedagogic content delivery that seems to fit modern generations of students while tackling relevant challenges faced by the current scholar...

(This article belongs to the Special Issue Extended or Mixed Reality (AR + VR): Technology and Applications)
  • Communication
  • Open Access
4 Citations
3,150 Views
13 Pages

“From Drowning to Treading Water”: Adolescents and Young Adults Living with Incurable and Indolent Metastatic Soft Tissue Sarcoma for More than Two Years

  • Paul R. D’Alessandro,
  • Caitlin E. Homanick,
  • Brittany D. Cooper,
  • Katelyn Ferguson and ,
  • Hillary Rutan and
  • Joseph G. Pressey
  • + 1 author+ 0 author

28 January 2025

Introduction: Adolescent/young adult (AYA) patients with metastatic soft tissue sarcoma (STS) typically face a dismal prognosis. However, a subset of patients with incurable disease lives beyond two years. Due to the rarity of diagnoses and inherent...

(This article belongs to the Special Issue Quality of Life and Side Effects Management in Cancer Treatment (Volume II))
  • Review
  • Open Access
549 Views
27 Pages

3 September 2026

For nearly a century, flotation kinetics has relied on deterministic first-order rate equations treating the cell as a homogeneous reactor, a paradigm that faces significant limitations for heterogeneous ores, especially coal, whose organic macerals,...

(This article belongs to the Special Issue Kinetic Characterization and Its Applications in Mineral Processing)