Skip to Content

512 Results Found

  • Article
  • Open Access
18 Citations
4,691 Views
11 Pages

Fabrication of a Covalent Triazine Framework Functional Interlayer for High-Performance Lithium–Sulfur Batteries

  • Ben Hu,
  • Bing Ding,
  • Chong Xu,
  • Zengjie Fan and ,
  • Derong Luo,
  • Peng Li,
  • Hui Dou and
  • Xiaogang Zhang
  • + 3 authors+ 0 author

14 January 2022

The shuttling effect of polysulfides is one of the major problems of lithium–sulfur (Li–S) batteries, which causes rapid capacity fading during cycling. Modification of the commercial separator with a functional interlayer is an effective...

  • Article
  • Open Access
1 Citations
1,969 Views
15 Pages

12 November 2024

Highly-effective non-halogenated flame retardants have received widespread attention because they are environmentally friendly, with low toxicity and low smoke density. In this work, interlayer-functionalized graphene (fRGO) containing silicon and ph...

(This article belongs to the Special Issue Chemical and Microbiological Analyses of Wastes, Effluents and Materials)
  • Article
  • Open Access
6 Citations
1,846 Views
12 Pages

19 May 2025

Maghemite (γ-Fe2O3) nanoparticles are widely used in biomedical, catalytic, and environmental applications owing to their superparamagnetic properties and surface tunability. Functionalization with primary amine groups via 3-aminopropyltriethox...

(This article belongs to the Section Sustainable Processes)
  • Article
  • Open Access
2 Citations
3,212 Views
26 Pages

9 December 2022

This study presents a comprehensive analytical modeling technology to model transient behaviors of multilayered reservoirs with inter-layer pure-planar crossflow induced by multi-stage hydraulically fractured horizontal well (MHFHW). The objective of...

(This article belongs to the Special Issue New Advances in Analytical and Numerical Techniques in Fluid Mechanics)
  • Article
  • Open Access
8 Citations
3,347 Views
14 Pages

30 November 2022

Calcium silicate hydrate (C-S-H) is the main product of cement hydration and has also been shown to be the main sorbing phase of actinide ions interacting with cement. U(IV) has been chosen as an exemplary actinide ion to study actinide sorption at C...

(This article belongs to the Special Issue Mineral-Water Interfaces and Interfacial Reactions with (Radioactive) Contaminants)
  • Article
  • Open Access
22 Citations
4,777 Views
10 Pages

Ultralow Interlayer Friction of Layered Electride Ca2N: A Potential Two-Dimensional Solid Lubricant Material

  • Jianjun Wang,
  • Lin Li,
  • Ziting Shen,
  • Peng Guo and ,
  • Meng Li,
  • Bin Zhao,
  • Lili Fang and
  • Linfeng Yang
  • + 3 authors+ 0 author

4 December 2018

Dispersion-corrected density functional theory (DFT) calculations reveal that the layered electride of dicalcium nitride (Ca2N) exhibits stronger interlayer binding interactions but lower interlayer friction behavior than that of traditional layered...

(This article belongs to the Special Issue Advanced Functional Nanomaterials and Their Applications)
  • Article
  • Open Access
1 Citations
2,263 Views
23 Pages

1 September 2025

Laminated glass (LG) composite systems are increasingly being utilized in architectural and security applications due to their enhanced strength and safety features. Understanding the structural response of LG systems is crucial for optimizing their...

(This article belongs to the Section Composites Manufacturing and Processing)
  • Article
  • Open Access
241 Views
18 Pages

12 October 2026

Lithium–sulfur (Li-S) batteries offer a high theoretical energy density of 2600 Wh·kg−1 and a theoretical specific capacity of 1675 mAh·g−1; however, their practical application is severely hindered by the shuttle effe...

(This article belongs to the Special Issue 30th Anniversary of Molecules—Recent Advances in Electrochemistry)
  • Article
  • Open Access
1 Citations
1,065 Views
16 Pages

Electrospun ZnO Nanofibers as Functional Interlayer in CdS/PbS-Based n–p Thin Film Solar Cells

  • Rodrigo Hernández-Hernández,
  • Liliana Licea-Jiménez,
  • Francisco de Moure-Flores,
  • José Santos-Cruz and ,
  • Aime Gutiérrez-Peralta and
  • Claudia Elena Pérez-García
  • + 1 author+ 0 author

24 November 2025

We introduce a fully solution-processed interlayer strategy for n–p CdS/PbS thin film solar cells that combines a sol–gel ZnO compact coating with an electrospun ZnO nanofiber network. The synthesis and characterization of ZnO, CdS, and P...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
8 Citations
3,161 Views
18 Pages

26 January 2022

The existence of local soft interlayer can significantly amplify or attenuate the ground motion and thus might influence the lagged spatial coherency between spatially varying earthquake ground motions. A target site with a local soft interlayer was...

(This article belongs to the Special Issue Earthquake-Resistant Design of Geotechnical Structure)
  • Article
  • Open Access
2 Citations
2,430 Views
13 Pages

26 August 2024

The prototype misfit layer compound (SnS)1.17NbS2 consists alternatingly of a metallic triatomic NbS2 layer, in which Nb atoms are sandwiched by S atoms, and an insulating SnS double layer featuring a NaCl-type structure. Here we investigate the effe...

(This article belongs to the Special Issue Microstructure and Properties of Intermetallic Compounds)
  • Article
  • Open Access
3 Citations
3,033 Views
8 Pages

Titanium and Tantalum Used as Functional Gradient Interlayer to Join Tungsten and Eurofer97

  • Marianne Richou,
  • Isabelle Chu,
  • Geoffrey Darut,
  • Raphael Maestracci and ,
  • Manda Ramaniraka and
  • Erick Meillot
  • + 1 author+ 0 author

13 December 2022

For the DEMO reactor, tungsten is considered as an armor material. Eurofer97 is planned to be used as a structural material for the first wall and in the divertor region, especially for the shielding liner component. To date, several joining solution...

(This article belongs to the Special Issue Special Issue Dedicated to 32nd Symposium on Fusion Technology—SOFT2022)
  • Review
  • Open Access
18 Citations
6,303 Views
19 Pages

Advances in Cathodes for High-Performance Magnesium-Sulfur Batteries: A Critical Review

  • Ying Ying Yao,
  • Yang Zhan,
  • Xin Yu Sun,
  • Zhao Li and ,
  • Hao Xu,
  • Richard M. Laine and
  • Jian Xin Zou
  • + 2 authors+ 0 author

Large-scale energy storage with high performance and at a reasonable cost are prerequisites for promoting clean energy utilization. With a high theoretical energy density of 1722 Wh·kg−2, high element abundance (e.g., Mg of 23,000 ppm, S...

(This article belongs to the Section Battery Materials and Interfaces: Anode, Cathode, Separators and Electrolytes or Others)
  • Article
  • Open Access
8 Citations
3,871 Views
19 Pages

Enhancing Efficiency in Inverted Quantum Dot Light-Emitting Diodes through Arginine-Modified ZnO Nanoparticle Electron Injection Layer

  • Young-Bin Chae,
  • Su-Young Kim,
  • Hyuk-Doo Choi,
  • Dae-Gyu Moon and ,
  • Kyoung-Ho Lee and
  • Chang-Kyo Kim
  • + 1 author+ 0 author

26 January 2024

Many quantum dot light-emitting diodes (QLEDs) utilize ZnO nanoparticles (NPs) as an electron injection layer (EIL). However, the use of the ZnO NP EIL material often results in a charge imbalance within the quantum dot (QD) emitting layer (EML) and...

(This article belongs to the Section Synthesis, Interfaces and Nanostructures)
  • Article
  • Open Access
1 Citations
805 Views
18 Pages

14 April 2026

Carbon fiber-reinforced polymers (CFRP) are widely employed in advanced manufacturing sectors such as aerospace, wind energy, and new energy vehicles owing to their high specific strength and stiffness. The growing demand for lightweight, high-perfor...

(This article belongs to the Special Issue Advances in Strengthening and Toughening of Carbon Fiber-Reinforced Polymer Composites)
  • Article
  • Open Access
20 Citations
6,518 Views
18 Pages

16 August 2018

Compatible interlayers must be coated on reinforcing fibers to ensure effective stress transfer from the polymer matrix to the fiber in high-performance polymer composites. The mechanical properties of the interlayer, and its interfacial adhesion on...

(This article belongs to the Special Issue Glass Fibers 2018)
  • Article
  • Open Access
6 Citations
3,941 Views
10 Pages

Functionalized rGO Interlayers Improve the Fill Factor and Current Density in PbS QDs-Based Solar Cells

  • Anton A. Babaev,
  • Peter S. Parfenov,
  • Dmitry A. Onishchuk,
  • Aliaksei Dubavik and ,
  • Sergei A. Cherevkov,
  • Andrei V. Rybin,
  • Mikhail A. Baranov,
  • Alexander V. Baranov,
  • Aleksandr P. Litvin and
  • Anatoly V. Fedorov
  • + 5 authors+ 0 author

16 December 2019

Graphene-quantum dot nanocomposites attract significant attention for novel optoelectronic devices, such as ultrafast photodetectors and third-generation solar cells. Combining the remarkable optical properties of quantum dots (QDs) with the exceptio...

(This article belongs to the Special Issue Optical Characterization of Novel Composite and Optically Active Materials)
  • Communication
  • Open Access
7 Citations
2,243 Views
9 Pages

25 March 2024

The implementation of a functional separator represents a highly encouraging approach to mitigating polysulfide shuttling in lithium–sulfur (Li–S). In this study, a two-dimensional (2D) 1,3,5-triformylphloroglucinol (Tp)-p-phenylenediamin...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Review
  • Open Access
24 Citations
5,435 Views
16 Pages

10 December 2022

Thin-film composite (TFC) polyamide (PA) membrane has been widely applied in nanofiltration, reverse osmosis, and forward osmosis, including a PA rejection layer by interfacial polymerization on a porous support layer. However, the separation perform...

(This article belongs to the Section Membrane Chemistry)
  • Article
  • Open Access
3 Citations
2,811 Views
22 Pages

Study on the Weak Interlayer Identification Method Based on Borehole Photo-Acoustic Combined Measurement: Application to a Landslide Case Study

  • Jinchao Wang,
  • Junfeng Huang,
  • Hui Min,
  • Feng Wang and ,
  • Yiteng Wang and
  • Zengqiang Han
  • + 1 author+ 0 author

19 October 2022

A weak interlayer is the key factor in controlling slope stability. It is of great significance to effectively identify the weak interlayer in the study of spatial and temporal distribution law and the internal structure characteristics of a landslid...

  • Article
  • Open Access
2 Citations
2,650 Views
13 Pages

Squaric-acid-linked zwitterionic covalent organic frameworks (Z-COFs), assembled through interlayer interactions, are emerging as potential materials in the field of photocatalysis. However, the study of their interlayer interactions has been largely...

  • Article
  • Open Access
5 Citations
3,068 Views
12 Pages

Porous Carbon Interlayer Derived from Traditional Korean Paper for Li–S Batteries

  • Yunju Choi,
  • Hyungil Jang,
  • Jong-Pil Kim,
  • Jaeyeong Lee and ,
  • Euh Duck Jeong,
  • Jong-Seong Bae and
  • Heon-Cheol Shin
  • + 2 authors+ 0 author

19 February 2024

A carbonized interlayer effectively helps to improve the electrochemical performance of lithium–sulfur (Li–S) batteries. In this study, a simple and inexpensive carbon intermediate layer was fabricated using a traditional Korean paper cal...

(This article belongs to the Section Energy and Catalysis)
  • Article
  • Open Access
18 Citations
4,681 Views
15 Pages

23 January 2020

This study reported a series of thin film composite (TFC) membranes with single-walled nanotubes (SWCNTs) interlayers for the forward osmosis (FO) application. Pure SWCNTs with ultrahigh length-to-diameter ratio and without any functional group were...

  • Article
  • Open Access
45 Citations
5,516 Views
10 Pages

Effect of Boron Doping on the Interlayer Spacing of Graphite

  • Chenguang Bao,
  • Qing Zeng,
  • Fujin Li,
  • Lei Shi and ,
  • Wei Wu,
  • Li Yang,
  • Yuxi Chen and
  • Hongbo Liu
  • + 3 authors+ 0 author

13 June 2022

Boron-doped graphite was prepared by the heat treatment of coke using B4C powder as a graphitization catalyst to investigate the effects of the substitutional boron atoms on the interlayer spacing of graphite. Boron atoms can be successfully incorpor...

  • Article
  • Open Access
3 Citations
2,677 Views
13 Pages

Domain wall mobility as a function of nonmagnetic interlayer thickness and temperature was studied in ultrathin exchange-coupled ferromagnetic layers using magneto-optic Kerr microscopy. The system under study is a Pt/Co/Pt/Co/Pt heterostructure havi...

(This article belongs to the Section Magnetic Materials)
  • Article
  • Open Access
3 Citations
2,230 Views
21 Pages

The Roof-Fall Mechanism and Support-While-Drilling Technology of the Rectangular Roadway with Layered Roofs and Weak Interlayers

  • Jiyu Wang,
  • Xigui Zheng,
  • Cancan Liu,
  • Peng Li and ,
  • Xiaowei Guo and
  • Wenjie Xu
  • + 1 author+ 0 author

13 April 2023

Studies have confirmed the poor stability of layered roofs with weak interlayers, and it is necessary to study the roof-caving mechanism of such roadways. A model of a weak interlayer was established to study the influence of the layer position and h...

(This article belongs to the Special Issue Fracking and Permeability Enhancement in Fractured Rock Masses for Underground Mining)
  • Article
  • Open Access
1 Citations
495 Views
25 Pages

This study presents a coupled numerical–experimental investigation into the early-age thermo-mechanical behaviour of 3D-printed concrete (3DPC), with particular emphasis on strength development, interlayer bonding, and thermally induced crackin...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
554 Views
19 Pages

17 September 2026

The graphene/MoS2 composite is a functional heterostructure with broad applications that leverage the synergistic properties of its constituents. Generally, small ambient molecules might penetrate and adsorb into the interlayer of graphene/MoS2 and i...

(This article belongs to the Section Theory and Simulation of Nanostructures)
  • Review
  • Open Access
8 Citations
3,822 Views
23 Pages

Advances in the Synthesis of Crystalline Metallosilicate Zeolites via Interlayer Expansion

  • Chaoqun Bian,
  • Yichang Yang,
  • Xiaohui Luo,
  • Wenxia Zhang and ,
  • Jie Zhang,
  • Longfeng Zhu and
  • Jianping Qiu
  • + 2 authors+ 0 author

29 September 2021

Given the numerous industrial applications of zeolites as adsorbents, catalysts, and ion-exchangers, the development of new zeolite structures is highly desired to expand their practical applications. Currently, a general route to develop new zeolite...

(This article belongs to the Special Issue Review Papers in Materials Chemistry)
  • Review
  • Open Access
5 Citations
1,967 Views
15 Pages

Recent Advances in Octacalcium Phosphate with Incorporated Carboxylate Ions: A Review

  • Taishi Yokoi,
  • Peng Chen,
  • Masahiro Watanabe and
  • Masakazu Kawashita

27 August 2025

Octacalcium phosphate (OCP) is a calcium phosphate compound with a layered structure in which apatite layers, which have a structure similar to hydroxyapatite, and hydrated layers are stacked alternately. OCP can incorporate various carboxylate ions...

(This article belongs to the Section Inorganic Chemistry)
  • Article
  • Open Access
12 Citations
2,644 Views
14 Pages

Optimizing Interfacial Adhesion and Mechanical Performance of Multimaterial Joints Fabricated by Material Extrusion

  • Jakub Zatloukal,
  • Mathieu Viry,
  • Aleš Mizera,
  • Pavel Stoklásek and ,
  • Lukáš Miškařík and
  • Martin Bednařík
  • + 1 author+ 0 author

16 August 2025

Multimaterial 3D printing is transforming the landscape of additive manufacturing, enabling the production of advanced, functional parts with tailored properties for sectors like automotive, aerospace, and engineering. However, achieving strong inter...

(This article belongs to the Special Issue Processing and Mechanical Properties of Polymer Composites)
  • Article
  • Open Access
1 Citations
1,670 Views
22 Pages

Calculation and Intelligent Prediction of Long-Term Subgrade Settlement on Soft Soil Interlayer Foundations Under Secondary Consolidation in the Yellow River Floodplain

  • Yong Lu,
  • Ang Zheng,
  • Xianjin Xu,
  • Tao Lei and ,
  • Zihan Sang,
  • Lei Zhang,
  • Zhaoyun Sun,
  • Zhanyong Yao and
  • Kai Yao
  • + 4 authors+ 0 author

10 November 2025

Highways constructed on stratified foundations with thick soft soil interlayers in the Yellow River floodplain of Shandong Province have experienced long-term settlement. However, accurately predicting subgrade settlement caused by the secondary cons...

(This article belongs to the Special Issue Advanced Numerical Simulation Techniques for Geotechnical Engineering)
  • Review
  • Open Access
5 Citations
2,561 Views
45 Pages

18 November 2025

This review article summarizes the most widely used and effective technologies for producing protective and functional bilayer coatings. Particular attention is given to methods such as electroplating and electroless metallization, chemical vapor dep...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
75 Citations
5,496 Views
17 Pages

Effect of Structural Build-Up on Interlayer Bond Strength of 3D Printed Cement Mortars

  • Tinghong Pan,
  • Yaqing Jiang,
  • Hui He,
  • Yu Wang and
  • Kangting Yin

6 January 2021

Understanding the relationship between the intrinsic characteristics of materials (such as rheological properties and structural build-up) and printability and controlling intrinsic characteristics of materials through additives to achieve excellent...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
8 Citations
5,121 Views
19 Pages

Structure Quality of LuFeO3 Epitaxial Layers Grown by Pulsed-Laser Deposition on Sapphire/Pt

  • Sondes Bauer,
  • Adriana Rodrigues,
  • Lukáš Horák,
  • Xiaowei Jin and ,
  • Reinhard Schneider,
  • Tilo Baumbach and
  • Václav Holý
  • + 2 authors+ 0 author

21 December 2019

Structural quality of LuFeO 3 epitaxial layers grown by pulsed-laser deposition on sapphire substrates with and without platinum Pt interlayers has been investigated by in situ high-resolution X-ray diffraction (reciprocal-space mapping). The...

  • Article
  • Open Access
6 Citations
3,466 Views
24 Pages

6 February 2025

A tunnel excavation model with weak interlayers is established to analyze the effect of different angles and thicknesses on the displacement of the surrounding rock. Based on catastrophe theory, a stability criterion for surrounding rock displacement...

(This article belongs to the Section Building Structures)
  • Review
  • Open Access
4 Citations
5,216 Views
23 Pages

Interlayer Chemical Modulation of Phase Transitions in Two-Dimensional Metal Chalcogenides

  • Zhi Zhang,
  • Yi Wang,
  • Zelin Zhao,
  • Weijing Song and ,
  • Xiaoli Zhou and
  • Zejun Li
  • + 1 author+ 0 author

18 January 2023

Two-dimensional metal chalcogenides (2D-MCs) with complex interactions are usually rich in phase transition behavior, such as superconductivity, charge density wave (CDW), and magnetic transitions, which hold great promise for the exploration of exci...

(This article belongs to the Special Issue Chemical Functionalization of Two-Dimensional Materials)
  • Article
  • Open Access
4 Citations
1,692 Views
13 Pages

Fe Species Intercalation Confined by the Interlayer Environment of V2CTx MXene for Lithium-Ion Storage

  • Jiaxin Li,
  • Miao Liu,
  • Jiaming Li,
  • Wenjuan Han and ,
  • Shichong Xu,
  • Haibo Li and
  • Ming Lu
  • + 2 authors+ 0 author

This work successfully achieved pre-intercalation of Fe species in V2CTx MXene through an annealing method. The crystallographic structure, microscopic morphology, and functional groups of the samples before and after pre-intercalation were analyzed...

(This article belongs to the Special Issue Innovative Electrode Chemistry for Next-Generation Electrochemical Energy Storage)
  • Article
  • Open Access
24 Citations
9,316 Views
9 Pages

19 April 2022

Van der Waals (vdW) heterostructures based on two-dimensional (2D) transition metal dichalcogenides (TMDCs), particularly WS2/MoS2 heterostructures with type-II band alignments, are considered as ideal candidates for future functional optoelectronic...

(This article belongs to the Special Issue 2D Nanostructures for Optoelectronic and Green Energy Devices)
  • Article
  • Open Access
183 Views
11 Pages

26 October 2026

Layered transition-metal oxides are key cathode materials for lithium-ion batteries and promising feedstocks for direct recycling. Their recycling behavior is strongly governed by oxide-framework stability, interlayer interactions, defect formation,...

(This article belongs to the Section Energy Materials)
  • Article
  • Open Access
1 Citations
971 Views
31 Pages

MgCuZnAl-Layered Double Hydroxides for Cr(VI) Adsorption: Effect of Interlayer Anions on Uptake Behavior and pH-Dependent Stability

  • Agnieszka Lipke,
  • Agnieszka Gładysz-Płaska,
  • Gabriele Klydziute,
  • Grzegorz Wójcik and ,
  • Renata Łyszczek,
  • Halina Głuchowska,
  • Ewa Skwarek,
  • Denis Sokol,
  • Marek Majdan and
  • Aivaras Kareiva
  • + 5 authors+ 0 author

7 August 2026

Layered double hydroxides (LDHs) are functional materials with tunable structural, surface, and adsorption properties. In this study, multicationic LDHs were synthesised and evaluated as adsorbents for chromate(VI). Among the investigated materials,...

(This article belongs to the Special Issue Multifunctional Materials for Biomedical, Cosmetic, and Purification Applications)
  • Article
  • Open Access
1,378 Views
24 Pages

14 July 2026

Organosilane interlayers are widely used to improve the adhesion and corrosion resistance of multilayer protective coating systems. In this work, a nitrile-functional organosilane, 3-[(3-(triethoxysilyl)propyl)amino]propanenitrile (AN), was investiga...

(This article belongs to the Special Issue Advances in Organic Thin Films: Deposition, Processing, Characterization and Application)
  • Article
  • Open Access
7 Citations
2,904 Views
27 Pages

29 March 2023

The stacking of Ti3C2 with transition metal dihalide (TMDs) materials is an effective strategy to improve the physical properties of a single material, and the tuning of the related properties of these TMDs/Ti3C2 heterostructures is also an important...

  • Article
  • Open Access
38 Citations
5,279 Views
17 Pages

29 April 2022

Significant efforts have been spent determining or monitoring interlayer temperatures (IT) to increase quality in Wire Arc Additive Manufacturing (WAAM). However, an uneven thermal profile in the wall and a temperature gradient along the layer length...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
3 Citations
1,587 Views
16 Pages

9 August 2025

This study presents the development and performance evaluation of a rock asphalt-modified damping asphalt binder tailored for interlayer applications in photovoltaic pavement systems. A series of composite binders was formulated by incorporating Qing...

(This article belongs to the Special Issue Advances in Performance-Based Asphalt and Asphalt Mixtures)
  • Article
  • Open Access
144 Citations
12,467 Views
19 Pages

14 January 2020

Recently, the progress in 3D concrete printing has developed enormously. However, for the techniques available, there is still a severe lack of knowledge of the functional interaction of processing technology, concrete rheology and admixture usage. F...

(This article belongs to the Special Issue Concrete 3D Printing and Digitally-Aided Fabrication)
  • Review
  • Open Access
366 Views
41 Pages

Hydroxyapatite–Clay Composites: Mineralogical Control, Environmental Remediation, and Biomedical Applications

  • Klaudia Kowalska,
  • Ewa Skwarek,
  • Makpal Kaissina,
  • Zhanat Idrisheva and ,
  • Dauren Sovetkhanov and
  • Gulzhan Daumova
  • + 1 author+ 0 author

17 October 2026

Hydroxyapatite (HAp)–clay composites have attracted increasing interest as multifunctional materials for environmental remediation and biomedical applications owing to the complementary physicochemical properties of calcium phosphate and clay m...

(This article belongs to the Section Clays and Engineered Mineral Materials)
  • Article
  • Open Access
3 Citations
1,778 Views
14 Pages

Preparation of Structure-Function Integrated Layered CNT/Mg Composites

  • Shiping Deng,
  • Linchi Zou,
  • Zengxiang Liao and
  • Zhijie Lin

7 May 2024

Magnesium (Mg)-matrix composites have excellent damping and electromagnetic shielding properties. However, the mismatch between their strength and toughness limits their wide application. The aim of this work is to overcome the strength-toughness mis...

(This article belongs to the Section Advanced Composites)
  • Communication
  • Open Access
7 Citations
2,968 Views
8 Pages

28 March 2023

The electronic states of the twist bilayer graphene (TBG) moiré superlattice are usually regulated by the rotation angle, applied electric field, applied magnetic field, carrier concentration and applied stress, and thus exhibit novel physical...

(This article belongs to the Special Issue Graphene-Based Nanocomposites for Advanced Applications)
  • Article
  • Open Access
3 Citations
2,861 Views
12 Pages

Study of the Role of Titanium and Iron Cathodic Cages on Plasma-Nitrided AISI 430 Ferritic Stainless Steel

  • Mirza Z. Babur,
  • Aiyah S. Noori,
  • Zafar Iqbal,
  • Muhammad Shafiq and ,
  • Muhammad Asghar,
  • Abdulaziz H. Alghtani,
  • Vineet Tirth,
  • Ali Algahtani and
  • Abid Zaman
  • + 4 authors+ 0 author

14 October 2022

In contrast to austenitic and martensitic stainless steels, ferritic stainless steels have a lower hardness and wear resistance but exhibit excellent corrosion resistance. Due to this fact, their use in the aerospace, automobile, and house constructi...

(This article belongs to the Special Issue Microwave Passive Components)

of 11