- Article
The squared momentum transfer spectra of
The squared momentum transfer spectra of
This paper considers a rod with an insulated side surface, at the edges of which there is heat exchange with the external environment. It is assumed that the thermal process in the rod is controlled by the effect of the ambient temperature on the the...
Temperature has a great influence on the stability of bearing performance. For the study of bearing steady-state temperature, this paper proposes a test method to quickly predict the steady-state temperature of the outer ring of a bearing, which solv...
By combined numerical simulations and unidirectional solidification experiments, the temperature field evolution of seeding for nickel-based single-crystal superalloys was studied. At the steady state, the position of the mushy zone in the seed moves...
The process of extracting gold by biological oxidation involves oxidizing the refractory high-sulfur and high-arsenic ore with the help of bacteria to decompose the wrapping material of gold to extract the gold. Therefore, maximizing the activity of...
A novel method proposed to choose the optimal working fluid—solely from the point of view of expansion route—for a given heat source and heat sink (characterized by a maximum and minimum temperature). The basis of this method is the novel...
Material properties at elevated temperatures are important factors in the fire safety design and numerical analysis of concrete members strengthened with fiber reinforced polymer (FRP) composites. Most of the previous research mainly focused on tensi...
This study seeks to understand the thermal and energetic behavior of a domestic refrigerator more widely by experimentally evaluating the main effects of the thermal load (food) and the variation of the ambient temperature. To carry out the experimen...
To fill hydrogen fuel cell vehicles quickly and safely, the SAE J2601 protocol has published the MC method, which includes control of the filling speed and pressure target. The filling speed depends on the final filling time, the formula for which is...
The state estimation of a battery is a significant component of a BMS. Due to the poor temperature performance and voltage plateau phase in LiFePO4 batteries, the difficulty of state estimation is greatly increased. At the same time, the ambient temp...
To reveal the temperature rise evolution mechanism of isotropic media subjected to reciprocating motion constant-strength point heat source, various forms of analytical solutions are derived on the basis of differentiated relative scales, and non-dim...
Among transition metal oxides, VO2 is a particularly interesting and challenging correlated electron material where an insulator to metal transition (MIT) occurs near room temperature. Here we investigate a 16 nm thick strained vanadium dioxide film,...
Nano Cu precipitation plays a crucial role in significantly improving the performance of the Cu-bearing high-strength low-alloy steel. The final cooling temperature effects the transformation products of austenite during the continuous cooling proces...
This paper proposes a junction temperature estimation algorithm for the insulated gate bipolar transistor (IGBT) based on a power loss calculation and a thermal impedance model for inverter systems. The Simulink model was designed to calculate the po...
The integrated energy system includes various energy forms, complex operation modes and tight coupling links, which bring challenges to its steady-state modeling and steady-state power flow calculation. In order to study the steady-state characterist...
The nature of the thermodynamic behavior of Type I superconductor particles, having a cross section less than the Ginzburg-Landau temperature dependent coherence length is discussed for magnetic field induced adiabatic phase transitions from the supe...
The long-term operational reliability of a valve-side bushing in High-Voltage Direct Current (HVDC) converter transformers depends heavily on the integrity of the spring contact. The existing literature has primarily focused on static defects under s...
The Mpemba effect, where a hotter system can enter a cold phase faster than a cooler one, remains a counterintuitive phenomenon whose origins are still being unraveled. In this work, we propose and demonstrate a simple and general mechanism for the g...
A single-component molecular crystal [Pd(dddt)2] has been shown to exhibit almost temperature-independent resistivity under high pressure, leading theoretical studies to propose it as a three-dimensional (3D) Dirac electron system. To obtain more exp...
In this paper, we propose and design a magnetic field and temperature sensor using a novel petaloid photonic crystal fiber filled with magnetic fluid. The PCF achieves a high birefringence of more than 1.43 × 10−2 at the wavelength of 155...
The on-state voltage of MOSFETs is a convenient and powerful temperature-sensitive electric parameter (TSEP) to determine the junction temperature, thus enabling device monitoring, protection, diagnostics and prognostics. The main hurdle in the use o...
Thermotropic polyesters are a subject of keen interest due to their exceptional heat resistance, thermal stability, and high strength. However, these thermal characteristics pose significant constraints on standard manufacturing processes, as the mel...
In order to overcome the notable limitations of current methods for monitoring grain storage states, particularly in the early warning of potential risks and the analysis of the spatial distribution of grain temperatures within the granary, this stud...
On-chip generation, manipulation and detection of nonclassical states of light are some of the major issues for quantum information technologies. In this context, the maturity and versatility of semiconductor platforms are important assets towards th...
Indium is considered a candidate low-temperature solder because of its low melting temperature and excellent mechanical properties. However, the solid-state microstructure evolution of In with different substrates has rarely been studied due to the s...
Scattering of excitons by free carriers is a phenomenon, which is especially important when considering moderately to heavily doped semiconductors in low-temperature experiments, where the interaction of excitons with acoustic and optical phonons is...
The paper mainly studied the temperature rise characteristics of under-race lubricated high-speed angular contact ball bearings under operational conditions from the perspective of dynamics. The steady-state calculation model of the bearing was estab...
The silicon content of the molten iron is an important indicator of the furnace temperature trend in blast furnace smelting. In view of the multi-scale, non-linear, large time lag and strong coupling characteristics of the blast furnace smelting proc...
The leakage process simulation of a Natural Gas Liquid (NGL) storage tank requires the simultaneous solution of the NGL’s pressure, temperature and phase state in the tank and across the leak hole. The methods available in the literature rarely consi...
In the context of energy structure transition, Enhanced Geothermal Systems (EGSs) represent a core technology for developing hot dry rock (HDR) resources. However, the ultra-long-term natural recovery patterns of reservoir temperature after heat extr...
Furfuryl alcohol (FA) is a biobased monomer derived from lignocellulosic biomass. The present work describes its polymerization in the presence of protic polar solvents, i.e., water or isopropyl alcohol (IPA), using maleic anhydride (MA) as an acidic...
The inelastic scattering of N2 molecules from silica surfaces, taken at 100 K, has been investigated by adopting a semiclassical collision model in conjunction with the appropriate treatment of the long-range interaction forces. Such forces promote t...
Solid-state fermentation is widely used in traditional food production, but most of the complex processes involved were designed and are carried out without a scientific basis. Often, mathematical models can be established to describe mass and heat t...
Accurate estimation of the state of charge (SOC) and temperature of batteries is essential to ensure the safety of energy storage systems. However, it is very difficult to obtain multiple states of the battery with fewer sensors. In this paper, a joi...
During the fast-filling of a high-pressure hydrogen tank, the temperature of hydrogen would rise significantly and may lead to failure of the tank. In addition, the temperature rise also reduces hydrogen density in the tank, which causes mass decreme...
Alkaline based materials have been considered as a replacement for environmentally harmful Pb(Zr,Ti)O3 (PZT) electro-ceramics. In this paper, the K1/2Na1/2NbO3 (KNN) ceramics were prepared in a three stage process: first Nb2O5, Na2CO3, and K2CO3 were...
Power-level control is a crucial technique for the safe, stable and efficient operation of modular high temperature gas-cooled nuclear reactors (MHTGRs), which have strong inherent safety features and high outlet temperatures. The current power-level...
Isotactic Polypropylene (iPP) is a widely used polymer due to its excellent mechanical and thermal properties, as well as its chemical resistance. The crystallization behavior of polypropylene is influenced by several factors, such as temperature, co...
Milled peat must be dried for the production of peat fuel briquettes. The current trend in the creation of drying technologies is the intensification of the dehydration process while obtaining a high-quality final product. An increase in the temperat...
We consider a two-layer biological object consisting of layers with different thermophysical characteristics and subjected to laser radiation. Using the method of separation of variables and methods of control theory for finite-dimensional systems, w...
An artificial neural network model is proposed for the surface tension of liquid organic fatty acids covering a wide temperature range. A set of 2051 data collected for 98 acids (including carboxylic, aliphatic, and polyfunctional) was considered for...
Spectral and transport properties of small molecule single-crystal organic semiconductors have been theoretically analyzed focusing on oligoacenes, in particular on the series from naphthalene to rubrene and pentacene, aiming to show that the inclusi...
Rock wool insulation slabs are produced in special curing ovens, where molten rock wool fibres coated with binder are compressed between two slat conveyors and blown with hot air for vitrification. Often, the cross-section of the final slabs is sligh...
The bearing temperature forecasting provide can provide early detection of the gearbox operating status of wind turbines. To achieve high precision and reliable performance in bearing temperature forecasting, a novel hybrid model is proposed in the p...
The relationship between clutch thermodynamic characteristics and contact states of friction components is explored numerically and experimentally. The clutch thermodynamic numerical model is developed with consideration of the contact state and oil...
In order to perform intelligent identification of the various stages of cavitation development, a micro high-speed centrifugal pump was used as a research object for vibration signal analysis and feature extraction for normal, incipient cavitation, c...
We report cross-sections and rate coefficients for excited states colliding with electrons, heavy particles and walls useful for the description of H
In this paper, we show an analysis of the global stability of a Curzon–Ahlborn engine considering that the working substance of the engine satisfies the Van der Waals equation of state, which is more general than the ideal gas case. We use the...
A typical solid-state quantum sensor can be developed based on negatively charged nitrogen-vacancy (NV−) centers in diamond. The electron spin state of NV− can be controlled and read at room temperature. Through optical detection magnetic...
Effective thermal management is essential for the safety and lifetime of lithium-ion batteries. This study presents a proof-of-concept framework combining electrochemical–thermal simulation with machine learning for temperature prediction, ther...
of 30