Skip to Content

15,238 Results Found

  • Article
  • Open Access
698 Views
27 Pages

Research on the Prediction of Pressure, Temperature, and Hydrate Inhibitor Addition Amount After Surface Mining Throttling

  • Dake Peng,
  • Yuxin Wu,
  • Yiyun Wang,
  • Hong Wang and ,
  • Junji Wei,
  • Guojing Fu,
  • Wei Luo and
  • Jihan Wang
  • + 3 authors+ 0 author

21 January 2026

During the trial mining process, ground horizontal pipes are prone to generating hydrates due to pressure and temperature changes, leading to ice blockage. Hydrate inhibitors are usually added on-site to prevent freezing blockage. However, existing a...

(This article belongs to the Section Process Control, Modeling and Optimization)
  • Article
  • Open Access
17 Citations
3,328 Views
17 Pages

Effect of the Fe2O3 Addition Amount on Dephosphorization of Hot Metal with Low Basicity Slag by High-Temperature Laboratorial Experiments

  • Wenkui Yang,
  • Jian Yang,
  • Yanqiu Shi,
  • Zhijun Yang and ,
  • Fubin Gao,
  • Runhao Zhang and
  • Han Sun
  • + 2 authors+ 0 author

4 March 2021

In this paper, the influence of the Fe2O3 addition amount on the dephosphorization of hot metal at 1623 K with the slag of the low basicity (CaO/SiO2) of about 1.5 was investigated by using high-temperature laboratorial experiments. With increasing t...

  • Article
  • Open Access
27 Citations
6,945 Views
14 Pages

Determination of the Optimum Amount of Superplasticizer Additive for Self-Compacting Concrete

  • Jose A. Sainz-Aja,
  • Isidro A. Carrascal,
  • Juan A. Polanco,
  • Israel Sosa and ,
  • Carlos Thomas,
  • Jose Casado and
  • Soraya Diego
  • + 2 authors+ 0 author

29 April 2020

Self-compacting concrete modifies its workability with small variations in the amount of superplasticizer additive. For this reason, large number of tests are required to monitor its workability. In order to determine the appropriate amount of additi...

(This article belongs to the Special Issue Concrete and Mortar with Non-conventional Materials)
  • Article
  • Open Access
1 Citations
1,125 Views
26 Pages

25 January 2026

Rheology plays an important role in the 3D concrete printing technology, because it directly governs the flowability and shape retention of the material, impacting both the printing process and the final quality of the obtained structure. Local raw m...

(This article belongs to the Special Issue Advances and Applications of Recycled Concrete in Green Building)
  • Article
  • Open Access
4 Citations
2,344 Views
9 Pages

In binder jetting additive manufacturing (BJAM), parts are fabricated layer by layer by depositing a liquid binder on selected regions of the powder bed. Powder particles in the hopper of the printer are dispensed onto the powder bed to form a layer...

  • Article
  • Open Access
2 Citations
724 Views
16 Pages

3 February 2026

This study aims to investigate the effects and underlying mechanisms of recycled sand replacement rate, additional water compensation factor, and recycled powder content on the strength, volumetric water absorption, and impermeability of recycled san...

(This article belongs to the Special Issue Advances in Concrete and Steel Construction Coatings: Materials, Mechanical Properties, Applications)
  • Article
  • Open Access
53 Citations
5,109 Views
16 Pages

18 December 2020

WAAM (wire and arc additive manufacturing) is becoming an increasingly popular method to produce components from metals, which are usually not so suitable for conventional production methods. One of the good examples is duplex stainless steels (DSSs)...

(This article belongs to the Special Issue Development of Mechanical, Corrosion Resistance, and Antibacterial Properties of Steels)
  • Article
  • Open Access
14 Citations
3,435 Views
13 Pages

17 December 2020

In this study, we explore the effect of phenylmethylsilicone oil (PSO) addition amount and viscosity in a fouling release coating based on polydimethylsiloxane (PDMS). The surface properties, mechanical properties, anti-fouling and drag-reduction per...

  • Article
  • Open Access
9 Citations
3,766 Views
20 Pages

The Quality and Starch Digestibility of Multi-Grain Noodles Are Regulated by the Additive Amount of Dendrobium Officinale

  • Xinyu Zhang,
  • Pai Peng,
  • Qianying Ma,
  • Shance Niu and ,
  • Shande Duan,
  • Yimeng Zhang,
  • Xinzhong Hu and
  • Xiaolong Wang
  • + 3 authors+ 0 author

27 January 2025

Dendrobium officinale (DO) is a well-known medicinal and edible plant, yet its impact on the quality of noodles has been infrequently reported. In this study, DO was incorporated into multi-grain flour in varying proportions (0, 2, 4, 6, 8%) to prepa...

(This article belongs to the Section Grain)
  • Article
  • Open Access
24 Citations
3,240 Views
12 Pages

The Effect of the Addition of a Fat Emulsifier on the Amount and Quality of the Obtained Biogas

  • Jakub Sikora,
  • Marcin Niemiec,
  • Anna Szeląg-Sikora,
  • Zofia Gródek-Szostak and ,
  • Maciej Kuboń and
  • Monika Komorowska
  • + 1 author+ 0 author

9 April 2020

Slaughterhouse waste management is an important technological, economic, and environmental challenge. Recently, more and more attention has been paid to the possibility of obtaining biogas from waste generated by slaughterhouses. The aim of the paper...

(This article belongs to the Special Issue Selected paper from 6th International Conference on Renewable Energy Sources (ICoRES 2019))
  • Article
  • Open Access
46 Citations
9,001 Views
12 Pages

24 April 2018

In this study, phenylmethylsilicone oil (PSO) with different viscosity was used for research in fouling release coatings based on polydimethylsiloxane (PDMS). The surface properties and mechanical properties of the coatings were investigated, while t...

(This article belongs to the Special Issue Advanced Coatings for Buildings)
  • Article
  • Open Access
8 Citations
3,041 Views
18 Pages

Effect of the Addition of Different Amounts of Aramid Fibers on Metal Friction and Wear during Mixing

  • Deshang Han,
  • Quyang Ma,
  • Jie Wang,
  • Hongbo Chen and ,
  • Chuansheng Wang and
  • Wenwen Han
  • + 1 author+ 0 author

21 July 2022

Studies show that the long-term operation of a rubber mixer results in wear at the end face of the mixer. End face wear increases the gap between the mixing chamber and the end face, resulting in leakage and a reduction in the mixing performance, aff...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
55 Citations
4,606 Views
23 Pages

Deaggregation and Crystallization Inhibition by Small Amount of Polymer Addition for a Co-Amorphous Curcumin-Magnolol System

  • Jiawei Han,
  • Luyuan Li,
  • Meiling Su,
  • Weili Heng and ,
  • Yuanfeng Wei,
  • Yuan Gao and
  • Shuai Qian
  • + 2 authors+ 0 author

Different from previously reported co-amorphous systems, a co-amorphous curcumin-magnolol (CUR-MAG CM) system, as compared with its crystalline counterparts, exhibited decreased dissolution due to its aggregation during dissolution. The main purpose...

  • Article
  • Open Access
7 Citations
2,428 Views
14 Pages

8 November 2024

In recent years, graphene oxide (GO)-based two-dimensional (2D) laminar membranes have attracted considerable attention because of their unique well-defined nanochannels and deliver a wide range of molecular separation properties and fundamentals. Ho...

(This article belongs to the Special Issue Recent Advances in Functional Polymer Materials for Water Treatment)
  • Article
  • Open Access
14 Citations
5,630 Views
19 Pages

Effect of Additives, Cement Type, and Foam Amount on the Properties of Foamed Concrete Developed with Civil Construction Waste

  • Richard Thomas Lermen,
  • Patrícia Favaretto,
  • Rodrigo de Almeida Silva,
  • Gelsa Edith Navarro Hidalgo and ,
  • Rejane M. C. Tubino and
  • Francieli Tiecher
  • + 1 author+ 0 author

26 July 2019

The main objective of this study was to evaluate the use of additives in producing foamed concrete blocks, which were made by totally replacing natural sand with civil construction waste (CCW). The concrete blocks were developed in accordance with an...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
540 Views
24 Pages

Effects of Water-Storage Clay Particle Size, Addition Amount, and Mixed Application Depth on the Vertical Movement Characteristics of Soil Moisture

  • Lei Guo,
  • Zixuan Zhao,
  • Dazhuang Zhou,
  • Shihua Zhang and ,
  • Juanjuan Ma,
  • Lijian Zheng and
  • Xihuan Sun
  • + 2 authors+ 0 author

11 July 2026

The Loess Plateau suffers from both drought and soil erosion, impeding regional sustainable development. Water-Storage Clay (WSC), a novel inorganic porous material with high porosity and water absorption, exhibits potential to enhance soil infiltrat...

  • Article
  • Open Access
25 Citations
3,211 Views
13 Pages

Effect of Small Amount of Ni Addition on Microstructure and Fatigue Properties of Sn-Sb-Ag Lead-Free Solder

  • Mizuki Yamamoto,
  • Ikuo Shohji,
  • Tatsuya Kobayashi,
  • Kohei Mitsui and
  • Hirohiko Watanabe

7 July 2021

The effect of the addition volume of Ni on the microstructures and tensile and fatigue properties of Sn-6.4Sb-3.9Ag (mass%) was investigated using micro-size specimens. The addition of Ni into Sn-6.4Sb-3.9Ag tends to increase the number of grains for...

(This article belongs to the Special Issue Research on Fatigue Behavior of Metals and Alloys)
  • Article
  • Open Access
542 Views
21 Pages

The Effect of Addition of Different Amounts of Chitosan Powder to the Batter and Chitosan Coating of Tea Sausage (Dry-Fermented Sausage) on the Physico-Chemical, Sensory and Microbiological Quality

  • Jelena Latinović,
  • Vladimir Tomović,
  • Lato Pezo,
  • Senka Popović and ,
  • Nevena Hromiš,
  • Sunčica Kocić-Tanackov,
  • Aleksandra Martinović,
  • Dragan Vujadinović and
  • Vesna Đorđević
  • + 4 authors+ 0 author

2 September 2026

The effect of chitosan addition at amounts of 0, 0.25 and 0.50% and chitosan coating on pH, instrumental surface and cut cross-section colour (L*—lightness, a*—redness, b*—yellowness, h—hue angle, C*—chroma-saturation in...

(This article belongs to the Section Food Engineering and Technology)
  • Article
  • Open Access
2 Citations
2,585 Views
20 Pages

19 March 2025

Whole grain foods have been recommended to preserve biologically active components and benefit human health. The effect of the addition amount of whole sweet potato flour (WSPF, 25%, 51%, and 75%) on the physicochemical and structural properties of e...

(This article belongs to the Special Issue Post-Harvest and Processing Methods to Retain Agri-Food Quality and Nutritional Value)
  • Article
  • Open Access
14 Citations
3,939 Views
22 Pages

Quality over Quantity: How Different Dispersion Qualities of Minute Amounts of Nano-Additives Affect Material Properties in Powder Bed Fusion of Polyamide 12

  • Alexander Sommereyns,
  • Stan Gann,
  • Jochen Schmidt,
  • Abootorab Baqerzadeh Chehreh and ,
  • Arne Lüddecke,
  • Frank Walther,
  • Bilal Gökce,
  • Stephan Barcikowski and
  • Michael Schmidt
  • + 4 authors+ 0 author

15 September 2021

The great interest, within the fields of research and industry, in enhancing the range and functionality of polymer powders for laser powder bed fusion (LB-PBF-P) increases the need for material modifications. To exploit the full potential of the add...

(This article belongs to the Special Issue New Frontiers in Materials Design for Laser Additive Manufacturing)
  • Article
  • Open Access
1 Citations
440 Views
15 Pages

Effect of Addition Amount of Microbial Self-Repairing Material on Anti-Cracking Performance of Concrete

  • Hai-Yan Zhang,
  • Hu-Bin Bai,
  • Gui-Qiang Li,
  • Yu-Jiao Zhang and ,
  • Hui Rong and
  • Xiang-Guo Li
  • + 1 author+ 0 author

12 June 2026

Although microbial self-healing concrete technology has been widely studied, limited attention has been paid to the effect of the dosage of microbial self-healing materials on concrete crack repair performance. To address this, this study investigate...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
9 Citations
2,983 Views
14 Pages

Study on SI Engine Operation Stability at Lean Condition—The Effect of a Small Amount of Hydrogen Addition

  • Jacek Leyko,
  • Kamil Słobiński,
  • Jarosław Jaworski,
  • Grzegorz Mitukiewicz and ,
  • Wissam Bou Nader and
  • Damian Batory
  • + 1 author+ 0 author

17 September 2023

The lean-burn mode is a solution that reduces the fuel consumption of spark-ignition internal combustion engines and keeps the low exhaust emission, but the stability of the lean-burn combustion process, especially at low loads, needs to be addressed...

(This article belongs to the Special Issue Internal Combustion Engine: Research and Application)
  • Article
  • Open Access
31 Citations
6,075 Views
14 Pages

Vehicle automation is linked to various benefits, such as increase in fuel and transport efficiency as well as increase in driving comfort. However, automation also comes with a variety of possible downsides, e.g., loss of situational awareness, loss...

  • Article
  • Open Access
195 Views
16 Pages

Influence of Carbon Addition Amount on the Strength and Reduction Performance of Pellet Ore Under Blast Furnace Lump Zone Reaction Conditions

  • Dawei Sun,
  • Xiaobin Fan,
  • Xu Liu,
  • Gaosheng Cui and ,
  • Mingyin Kou,
  • Guangwei Wang,
  • Shengli Wu and
  • Heng Zhou
  • + 3 authors+ 0 author

12 October 2026

Increasing the proportion of pellets in blast furnace (BF) burdens raises the raw material iron grade and reduces slag volume, thereby lowering fuel consumption. However, due to their dense microstructure, pellets typically exhibit low degrees of red...

(This article belongs to the Special Issue Innovations and Optimization in Blast Furnace Ironmaking)
  • Article
  • Open Access
94 Views
25 Pages

13 November 2026

Toenhance the antibacterial properties and scratch self-healing ability of UV wood coatings, in this study, a chitosan–gum arabic composite wall material was used, and tea tree oil and tung oil were used as core materials to prepare tea tree oi...

(This article belongs to the Special Issue Multifunctional Composite Coatings: Design and Performance)
  • Article
  • Open Access
14 Citations
6,299 Views
11 Pages

9 November 2022

A low-infrared-emissivity composite coating with outstanding mechanical properties and low glossiness was prepared by using an epoxy resin and polyurethane blend modified resin, flake brass powder, the silane coupling agent KH560, and a dispersant as...

  • Article
  • Open Access
16 Citations
3,474 Views
7 Pages

Improving Shipbuilding Steel Grade Quality at Stages of Smelting, Secondary Refining, and Continuous Casting

  • Pavel Kovalev,
  • Sergey Riaboshuk,
  • Aristotel Issagulov,
  • Svetlana Kvon and
  • Vitaliy Kulikov

9 February 2019

This work studied the effect of the amount of additives and the composition of refining slags on the metallurgical of steel grades of the S355G10, S420G2, and S460G2 types. The objects of study were samples of industrial melts after out-of furnace re...

  • Article
  • Open Access
18 Citations
4,805 Views
19 Pages

We investigated the solubility–permeability interplay using a solubilizer additive under non-sink conditions. Sodium lauryl sulfate (SLS) was used as a solubilizer additive. The solubility and permeability of two poorly soluble drugs at various doses...

(This article belongs to the Special Issue Drug Absorption Studies: In Situ, In Vitro and In Silico Models)
  • Article
  • Open Access
27 Citations
5,766 Views
12 Pages

14 September 2017

The application of additives (e.g., wheat straw (WS) or rapeseed-oil residue (RR)) to soils is a common agronomic practice, used for improving soil water retention. Through a laboratory investigation, this study examined the effects of RR and WS on i...

(This article belongs to the Special Issue Water and Solute Transport in Vadose Zone)
  • Article
  • Open Access
29 Citations
4,444 Views
10 Pages

1 October 2019

This paper studied the relationship between the residual amount of Sr and the morphology of the eutectic Si phase in A356 obtained through different modification treatment processes; additionally, the cooling rates of molds were studied. The eutectic...

(This article belongs to the Collection Alloy and Process Development of Light Metals)
  • Article
  • Open Access
6 Citations
7,939 Views
12 Pages

17 December 2019

The corrosion behavior of three used cooking oils and one non-edible fish oil was experimentally investigated by the immersion test of iron rods at room temperature. The corrosivity of the tested oils was indirectly determined from the amount of the...

(This article belongs to the Collection Bioenergy and Biofuel)
  • Article
  • Open Access
26 Citations
4,567 Views
8 Pages

28 November 2018

Magnesium hydride (MgH2) has become popular to study in hydrogen storage materials research due to its high theoretical capacity and low cost. However, the high hydrogen desorption temperature and enthalpy as well as the depressed kinetics, have seve...

(This article belongs to the Special Issue Advances in Hydrogen Storage Materials Research)
  • Article
  • Open Access
8 Citations
2,696 Views
13 Pages

Quality Aspects of Designing Prohealth Liver Sausages Enriched with Walnut Paste

  • Tomasz Florowski,
  • Anna Florowska,
  • Marta Chmiel,
  • Lech Adamczak and ,
  • Dorota Pietrzak,
  • Agnieszka Ostrowska and
  • Iwona Szymańska
  • + 2 authors+ 0 author

7 December 2022

The aim of the study was to determine the influence of enriching liver sausages with different levels of walnut paste on the quality properties of this product. Sausages were produced with 5, 10, 15, 20, and 25% amount additions of walnut paste and w...

(This article belongs to the Special Issue Strategies to Improve the Functional Value of Meat and Meat Products)
  • Article
  • Open Access
1 Citations
2,093 Views
11 Pages

8 November 2024

The cobalt-containing products of an enterprise were selected as the object of this study. The separation effect of Cyanex 272 on Zn and Co was studied through a pilot test. The results showed that Cyanex 272 had a high extraction rate for Zn at pH 3...

(This article belongs to the Section Mineral Processing and Extractive Metallurgy)
  • Article
  • Open Access
8 Citations
3,887 Views
19 Pages

1 February 2021

The effect of varying the amounts of metals Fe, Cu, K, and Mo was studied on a catalyst supported on activated carbon (AC), which is an item of novelty of this paper. The base-case catalyst contains 16% Fe, 0.9% K, 6% Mo, and 0.8% Cu relative to the...

(This article belongs to the Special Issue Catalytic Conversion of Carbonaceous Materials to Fuels and Chemicals)
  • Article
  • Open Access
7 Citations
2,260 Views
14 Pages

Parameters of Concrete Modified with Micronized Chalcedonite

  • Anna Kotwa,
  • Piotr Ramiączek,
  • Paulina Bąk-Patyna and
  • Robert Kowalik

8 May 2023

The PN-EN 197-1:2012 standard allows the use of additives as the main component above 5.0% by mass, as well as as a secondary component in an amount less than 5.0% by mass of cement. Proper selection of additives positively affects the rheological ch...

(This article belongs to the Special Issue Durability Studies on the Concrete and Related Composites)
  • Article
  • Open Access
13 Citations
6,805 Views
11 Pages

6 May 2014

The phosphor deposits of the β-sialon:Eu2+ mixed with various amounts (0–1 g) of the SnO2 nanoparticles were fabricated by the electrophoretic deposition (EPD) process. The mixed SnO2 nanoparticles was observed to cover onto the particle surfaces of...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
58 Citations
5,298 Views
16 Pages

Improvement of Cecal Commensal Microbiome Following the Insect Additive into Chicken Diet

  • Agata Józefiak,
  • Abdelbasset Benzertiha,
  • Bartosz Kierończyk,
  • Anna Łukomska and ,
  • Izabela Wesołowska and
  • Mateusz Rawski
  • + 1 author+ 0 author

30 March 2020

Gastrointestinal microbiota play an important role in regulating the metabolic processes of animals and humans. A properly balanced cecal microbiota modulates growth parameters and the risk of infections. The study examined the effect of the addition...

(This article belongs to the Collection Insects as Animal Feed: A New Promising Sector)
  • Article
  • Open Access
2 Citations
2,993 Views
13 Pages

Addition of Exogenous Fibrolytic Enzymes to the Feed of Confined Steers Modulates Fat Profile in Meat

  • Rafael Vinicius Pansera Lago,
  • Joana Morais da Cruz,
  • Gabriel J. Wolschick,
  • Mateus H. Signor and ,
  • Michel Breancini,
  • Bruna Klein,
  • Luiz Eduardo Lobo Silva,
  • Roger Wagner,
  • Maria Eduarda Pieniz Hamerski and
  • Aleksandro Schafer da Silva
  • + 6 authors+ 1 author

The objective of this study was to evaluate whether the addition of fibrolytic enzymes to the diet of cattle in confinement improves feed digestibility weight gain; as well as evaluating the profile of fatty acids in the ruminal environment and in me...

(This article belongs to the Special Issue Nutrients and Feed Additives in Ruminants)
  • Article
  • Open Access
77 Citations
12,951 Views
12 Pages

5 November 2021

Gelatinization, retrogradation and gel properties of wheat starch–wheat bran arabinoxylan (WS–WBAX) complexes have been evaluated. The results of rapid viscosity analyzer (RVA), differential scanning calorimetry (DSC) and Fourier transform infrared s...

(This article belongs to the Special Issue Recent Research Trends in New Generation Polymer Gels)
  • Feature Paper
  • Review
  • Open Access
147 Citations
10,147 Views
31 Pages

Impact of Doping and Additive Applications on Photocatalyst Textural Properties in Removing Organic Pollutants: A Review

  • Safia Syazana Mohtar,
  • Farhana Aziz,
  • Ahmad Fauzi Ismail,
  • Nonni Soraya Sambudi and ,
  • Hamidah Abdullah,
  • Ahmad Nazrul Rosli and
  • Bunsho Ohtani
  • + 2 authors+ 0 author

26 September 2021

The effect of ion doping and the incorporation of additives on photocatalysts’ textural properties have been reviewed. Generally, it can be summarised that ion doping and additives have beneficial effects on photocatalytic efficiency and not all have...

(This article belongs to the Special Issue Recent Advances in Photocatalysis for Wastewater Treatment: Synthesis of the Materials and Photocatalytic Reactors)
  • Article
  • Open Access
11 Citations
3,238 Views
15 Pages

Improvement of the Uniformity and Electrical Properties of Polyaniline Nanocomposite Film by Addition of Auxiliary Gases during Atmospheric Pressure Plasma Polymerization

  • Jae-Young Kim,
  • Hyo-Jun Jang,
  • Eunyoung Jung,
  • Gyutae Bae and ,
  • Soonwon Lee,
  • Choon-Sang Park,
  • Bhumjae Shin and
  • Heung-Sik Tae
  • + 3 authors+ 0 author

6 September 2021

The morphological and chemical properties of polyaniline (PANI) nanocomposite films after adding small amounts of auxiliary gases such as argon, nitrogen, and oxygen during atmospheric pressure (AP) plasma polymerization are investigated in detail. A...

(This article belongs to the Special Issue Plasma-Enabled Synthesis of Nanostructured Surfaces and Nanoparticles)
  • Article
  • Open Access
48 Citations
4,707 Views
14 Pages

Effect of a Nitrite/Nitrate-Based Accelerator on the Strength Development and Hydrate Formation in Cold-Weather Cementitious Materials

  • Akira Yoneyama,
  • Heesup Choi,
  • Masumi Inoue,
  • Jihoon Kim and ,
  • Myungkwan Lim and
  • Yuhji Sudoh
  • + 1 author+ 0 author

20 February 2021

Recently, there has been increased use of calcium-nitrite and calcium-nitrate as the main components of chloride- and alkali-free anti-freezing agents to promote concrete hydration in cold weather concreting. As the amount of nitrite/nitrate-based ac...

(This article belongs to the Special Issue Research of Mechanical Behavior of Cement and Concrete Composites)
  • Article
  • Open Access
20 Citations
4,178 Views
16 Pages

19 January 2022

The aim of the study was to evaluate the effects of Salvia hispanica and Nigella sativa seed addition on the volatile compounds and sensory characteristics (with particular emphasis on odor and flavor) of traditionally produced dry fermented sausages...

(This article belongs to the Special Issue Food Additives and Food Supplements)
  • Article
  • Open Access
33 Citations
7,124 Views
15 Pages

Carbon Black as Conductive Additive and Structural Director of Porous Carbon Gels

  • Ana Casanova,
  • Alicia Gomis-Berenguer,
  • Aurelien Canizares,
  • Patrick Simon and ,
  • Dolores Calzada and
  • Conchi O. Ania
  • + 1 author+ 0 author

4 January 2020

This work investigates the impact of carbon black (CB) as a porogenic agent and conductive additive in the preparation of electrically conductive nanoporous carbon gels. For this, a series of materials were prepared by the polycondensation of resorci...

(This article belongs to the Special Issue Organic and Carbon Gels: Properties and Application)
  • Article
  • Open Access
1 Citations
3,115 Views
11 Pages

13 March 2019

The physicochemical properties of soils might be affected by the addition of biomass black carbon, a special black carbon produced by incomplete combustion of biomass. Therefore, this study performed experiments to explore the effects of yak dung bio...

  • Article
  • Open Access
1 Citations
3,583 Views
13 Pages

5 June 2018

The image quality of laser and multi-function printers that make use of electrophotography depends on the amount of surface charge generated by contact electrification on the toner particles. However, because it has been impossible to experimentally...

(This article belongs to the Special Issue Integrated MEMS Sensors for the IoT Era)
  • Article
  • Open Access
1 Citations
2,473 Views
10 Pages

A Study on the Applicability of Bio-Sulfur as a Cement Admixture

  • Dowan Kim,
  • Byungran Lim,
  • Jonggyu Lee and
  • Cheagun Phae

28 September 2022

A large amount of bio-sulfur is generated during the process of refining landfill gas generated from landfills in metropolitan areas in Korea. Sulfurized concrete offers the advantages of reducing the amounts of CO2 generated, typically in large quan...

  • Article
  • Open Access
23 Citations
4,351 Views
17 Pages

13 February 2020

This study used liquefied red mud (RM) sludge, an aluminum industry by-product, as a construction material. Accordingly, various methods were examined that used the fabricated liquefied red mud (LRM) as an admixture for concrete, and the mechanical p...

(This article belongs to the Special Issue Concrete and Construction Materials)
  • Article
  • Open Access
49 Citations
3,869 Views
16 Pages

27 May 2021

Soda residue (SR), an industrial solid waste, pollutes the environment due to its high alkalinity and chloride ion content. SR can be used as an alkali activator of ground granulated blast furnace slag (GGBFS). This study investigated the effects of...

(This article belongs to the Special Issue Multi-Scale Structural Characterization of Cement-Based Composites)

of 305