Skip to Content

422 Results Found

  • Article
  • Open Access
6 Citations
2,509 Views
13 Pages

14 July 2023

Much attention has been paid to the surface modification of artificial skin barriers for the treatment of skin tissue damage. Chitosan is one of the natural materials that could be characterized by its biocompatibility. A number of methods for the pr...

(This article belongs to the Special Issue Advanced Nanomaterials and Applied Nanotechnologies: Devices, Processes and Systems)
  • Abstract
  • Open Access
1,444 Views
1 Page

In this study, granulated polylactic acid and ZnO, SiO2 and Al2O3 powders were mixed to form PLA/ZnO and PLA/ZnO SiO2 Al2O3 composites with different concentrations using a solvent casting method. [...]

(This article belongs to the Proceedings of The 37th International Symposium on Dynamical Properties of Solids)
  • Review
  • Open Access
19 Citations
3,907 Views
29 Pages

Technological Aspects and Evaluation Methods for Polymer Matrices as Dental Drug Carriers

  • Dorota Kida,
  • Tomasz Konopka,
  • Kamil Jurczyszyn and
  • Bożena Karolewicz

The development of polymer matrices as dental drug carriers takes into account the following technological aspects of the developed formulations: the composition and the technology used to manufacture them, which affect the properties of the carriers...

(This article belongs to the Special Issue Modern Polymers for Dental Application 2.0)
  • Proceeding Paper
  • Open Access
1 Citations
2,574 Views
6 Pages

16 November 2023

The purpose of the present investigation was to formulate a mouth-dispersing film of a Clopidogrel Hydrogen Sulphate dosage form for a rapid onset of action, which is very easy for administration, without the issue of swallowing and using water. The...

(This article belongs to the Proceedings of The 4th International Electronic Conference on Applied Sciences)
  • Article
  • Open Access
42 Citations
6,825 Views
15 Pages

Formulation and Evaluation of Novel Film Wound Dressing Based on Collagen/Microfibrillated Carboxymethylcellulose Blend

  • Kateřina Tenorová,
  • Ruta Masteiková,
  • Sylvie Pavloková,
  • Klára Kostelanská and ,
  • Jurga Bernatonienė and
  • David Vetchý
  • + 1 author+ 0 author

Collagen is essential as a physiological material in wound healing, so it is often used in wound management, mainly as a lyophilisate. Collagen also has excellent film-forming properties; unfortunately, however, its utilisation as a film wound dressi...

(This article belongs to the Collection Advanced Pharmaceutical Research in the Czech Republic)
  • Article
  • Open Access
19 Citations
4,273 Views
18 Pages

15 May 2025

Developing scaffolds with a three-dimensional porous structure and adequate mechanical properties remains a key challenge in tissue engineering of bone. These scaffolds must be biocompatible and biodegradable to effectively support osteoblastic cell...

(This article belongs to the Collection Advances in Cell Culture and Tissue Engineering)
  • Review
  • Open Access
55 Citations
11,215 Views
17 Pages

Over the past few decades, researchers and companies have been trying to develop novel drug delivery systems to ensure safety, efficacy, compliance, and patient acceptability. Nowadays drug discovery and development are expensive, complex, and time-c...

(This article belongs to the Section Pharmaceutical Technology)
  • Article
  • Open Access
39 Citations
4,144 Views
24 Pages

Bioactive and Biodegradable Polycaprolactone-Based Nanocomposite for Bone Repair Applications

  • Hosein Emadi,
  • Mehdi Karevan,
  • Maryam Masoudi Rad,
  • Sorour Sadeghzade and ,
  • Farnoosh Pahlevanzadeh,
  • Mohammad Khodaei,
  • Saber Khayatzadeh and
  • Saeid Lotfian
  • + 3 authors+ 0 author

31 August 2023

This study investigated the relationship between the structure and mechanical properties of polycaprolactone (PCL) nanocomposites reinforced with baghdadite, a newly introduced bioactive agent. The baghdadite nanoparticles were synthesised using the...

(This article belongs to the Special Issue Preparation and Application of Functionalized Polymer Fabrics)
  • Article
  • Open Access
23 Citations
6,979 Views
23 Pages

Rizatriptan-Loaded Oral Fast Dissolving Films: Design and Characterizations

  • Kiramat Ali Shah,
  • Guifeng Li,
  • Lina Song,
  • Binbin Gao and ,
  • Linyu Huang,
  • Dazhi Luan,
  • Haroon Iqbal,
  • Qingri Cao,
  • Farid Menaa and
  • Jinghao Cui
  • + 8 authors+ 3 authors

Rizatriptan (RZT) is an efficient anti-migraine drug which belongs to the class of selective 5 HT (1B/1D) serotonin receptor agonists. Nevertheless, RZT elicits several adverse effects and RZT nasal sprays have a limited half-life, requiring repeated...

  • Article
  • Open Access
9 Citations
5,293 Views
14 Pages

Biocompatible Piezoelectric PVDF/HA/AgNO3 Thin Film Prepared by the Solvent Casting Method

  • Ieva Markuniene,
  • Marzieh Rabiei,
  • Sohrab Nasiri,
  • Sigita Urbaite and ,
  • Arvydas Palevicius and
  • Giedrius Janusas
  • + 1 author+ 0 author

27 December 2022

In this study, new composites based on polyvinylidene fluoride (PVDF) were ornamented and prepared with hydroxyapatite (HA) and silver nitride (AgNO3). Taking into account the polarity of the solvent dimethyl sulfoxide, this solvent was used to dispe...

(This article belongs to the Special Issue Sensors Based on Piezoelectrics)
  • Article
  • Open Access
2 Citations
4,140 Views
16 Pages

Biocomposite Films of Amylose Reinforced with Polylactic Acid by Solvent Casting Method Using a Pickering Emulsion Approach

  • Marwa Faisal,
  • Jacob Judas Kain Kirkensgaard,
  • Bodil Jørgensen,
  • Peter Ulvskov and ,
  • Max Rée,
  • Sue Kang,
  • Nikolai Andersson,
  • Mikkel Jørgensen,
  • Jonas Simonsen and
  • Andreas Blennow
  • + 6 authors+ 1 author

Binary and ternary blends of amylose (AM), polylactic acid (PLA), and glycerol were prepared using a Pickering emulsion approach. Various formulations of AM/PLA with low PLA contents ranging from 3% to 12% were mixed with AM matrix and reinforced wit...

  • Article
  • Open Access
1,555 Views
22 Pages

Fabrication of Microneedle Patches by Suspension Casting of Drugs in Organic Solvents

  • Chao-Yi Lu,
  • Lara Vaid,
  • Asha Adler,
  • Gulcin Arslan Azizoglu and ,
  • Andrey V. Romanyuk and
  • Mark R. Prausnitz
  • + 1 author+ 0 author

Background/Objectives: Drug administration by microneedle patch (MNP) offers advantages over conventional dosage forms as a painless, self-administered skin patch for parenteral delivery. Dissolvable MNPs are typically manufactured by casting an aque...

(This article belongs to the Special Issue Microneedles for Drug and Vaccine Delivery)
  • Article
  • Open Access
7 Citations
3,572 Views
13 Pages

Influence of Dry-Mixing and Solvent Casting Blending Techniques on the Mechanical and Biological Behavior of Novel Biocompatible Poly(ε-caprolactone)/Alumina-Toughened Zirconia Scaffolds Obtained by 3D Printing

  • Mattia Di Maro,
  • Riccardo Pedraza,
  • Alessandro Mosca Balma,
  • Giovanna Gomez d’Ayala and ,
  • Giovanni Dal Poggetto,
  • Giulio Malucelli,
  • Ilaria Roato,
  • Donatella Duraccio,
  • Federico Mussano and
  • Maria Giulia Faga
  • + 5 authors+ 0 author

This work focuses on the study and comparison of two mixing methods for the dispersion of Alumina-Toughened Zirconia (ATZ) within the polymer matrix of Poly(ε-caprolactone) (PCL). The dry-mixing method using solvent-free impact milling (M) an...

(This article belongs to the Special Issue 3D Printing Composites)
  • Article
  • Open Access
9 Citations
4,630 Views
14 Pages

Controlling Morphology and Aggregation in Semiconducting Polymers: The Role of Solvents on Lasing Emission in Poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene-vinylene]

  • Minghuan Liu,
  • Yonggang Liu,
  • Zenghui Peng,
  • Chengliang Yang and ,
  • Quanquan Mu,
  • Zhaoliang Cao,
  • Ji Ma and
  • Li Xuan
  • + 3 authors+ 0 author

29 June 2017

Systematic experiments were performed to investigate solvent-dependent morphology and aggregation of the semiconducting polymer film poly[2-methoxy-5-(2′-ethyl-hexyloxy)-1,4-phenylene-vinylene] (MEH-PPV), which was span-cast from nonaromatic strong p...

  • Article
  • Open Access
5 Citations
2,588 Views
14 Pages

Influence of Solvents and Adsorption of Organic Molecules on the Properties of CVD Synthesized 2D MoS2

  • Antun Lovro Brkić,
  • Antonio Supina,
  • Davor Čapeta,
  • Lucija Dončević and ,
  • Lucija Ptiček,
  • Šimun Mandić,
  • Livio Racané and
  • Ida Delač
  • + 3 authors+ 0 author

20 July 2023

We present a simple method for modification of 2D materials by drop-casting of the organic molecule in solution on the 2D material under ambient conditions. Specifically, we investigated the adsorption of 6-(4,5-Dihydro-1H-imidazol-3-ium-2-yl)-2-(nap...

(This article belongs to the Section 2D and Carbon Nanomaterials)
  • Article
  • Open Access
50 Citations
6,494 Views
25 Pages

18 March 2025

Polylactic acid (PLA) is a biodegradable polymer with high tensile strength, high stiffness, and biocompatibility, but its brittleness and hydrophobicity limit its applications. This study aims to address these limitations by blending PLA with polyca...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Review
  • Open Access
115 Citations
16,918 Views
25 Pages

Challenges in Solvent-Free Methods for Manufacturing Electrodes and Electrolytes for Lithium-Based Batteries

  • Nina Verdier,
  • Gabrielle Foran,
  • David Lepage,
  • Arnaud Prébé and ,
  • David Aymé-Perrot and
  • Mickaël Dollé
  • + 1 author+ 0 author

20 January 2021

With the ever-growing energy storage notably due to the electric vehicle market expansion and stationary applications, one of the challenges of lithium batteries lies in the cost and environmental impacts of their manufacture. The main process employ...

(This article belongs to the Section Polymer Processing and Engineering)
  • Article
  • Open Access
898 Views
16 Pages

Impact of Processing and Char Feedstock on the Thermal, Mechanical, and Electrical Behavior of PLLA Composites

  • Donatella Duraccio,
  • Boutheina Rzig,
  • Mattia Di Maro,
  • Giulio Malucelli and ,
  • Finizia Auriemma,
  • Federica Pignatelli,
  • Giuliana Magnacca,
  • Pier Paolo Capra,
  • Mattia Bartoli and
  • Maria Giulia Faga
  • + 5 authors+ 0 author

1 April 2026

This work explores the influence of two preparation methods, solvent casting and melt mixing, on the structure–property relationships of poly-L-lactic acid (PLLA) composites reinforced with char derived from different waste feedstocks. Three ty...

(This article belongs to the Special Issue Advanced Poly(lactic Acid) Materials and PLA-Based Composites: From Fundamentals to Applications)
  • Article
  • Open Access
7 Citations
2,642 Views
15 Pages

Crystallization of Poly(ethylene oxide)-Based Triblock Copolymers in Films Swollen-Rich in Solvent Vapors

  • Iulia Babutan,
  • Otto Todor-Boer,
  • Leonard Ionut Atanase,
  • Adriana Vulpoi and
  • Ioan Botiz

In this study, we employed a polymer processing method based on solvent vapor annealing in a confined environment to swell-rich thin films of polybutadiene-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) triblock copolymers and to promote their crysta...

(This article belongs to the Special Issue Polymer Thin Films: From Fundamentals to Applications)
  • Article
  • Open Access
31 Citations
5,772 Views
20 Pages

The hypothesis of the present research is that by altering the substrate topography and/or stiffness to make it biomimetic, we can modulate cells behavior. Substrates with similar surface chemistry and varying stiffnesses and topographies were prepar...

  • Article
  • Open Access
42 Citations
4,691 Views
18 Pages

Physicochemical Properties and Cell Viability of Shrimp Chitosan Films as Affected by Film Casting Solvents. I-Potential Use as Wound Dressing

  • Hugo Yves C. Eulálio,
  • Mariana Vieira,
  • Thiago B. Fideles,
  • Helena Tomás and ,
  • Suédina M. L. Silva,
  • Carlos A. Peniche and
  • Marcus Vinícius L. Fook
  • + 2 authors+ 0 author

6 November 2020

Chitosan solubility in aqueous organic acids has been widely investigated. However, most of the previous works have been done with plasticized chitosan films and using acetic acid as the film casting solvent. In addition, the properties of these film...

(This article belongs to the Special Issue Advanced Polymeric Biomaterials: Preparation, characterization and applications)
  • Article
  • Open Access
12 Citations
3,167 Views
26 Pages

3 December 2024

In the present work, solvent casting and Pickering emulsion methods are studied to enhance the mechanical properties of polylactic acid (PLA) composites containing surface-modified cellulose nanomaterials. To enhance the compatibility and the adhesio...

(This article belongs to the Topic Advanced Polymeric Composites: Processing, Characterization and Mechanical Behavior)
  • Review
  • Open Access
19 Citations
7,366 Views
20 Pages

13 January 2020

Polymer-based CO2 selective membranes offer an energy efficient method to separate CO2 from flue gas. ‘Top-down’ polyelectrolytes represent a particularly interesting class of polymer materials based on their vast synthetic flexibility, t...

(This article belongs to the Special Issue New Trends in Membrane Preparation and Applications)
  • Article
  • Open Access
36 Citations
5,711 Views
18 Pages

31 July 2018

Dense films based on the hydrophobic Pebax®2533 were prepared by using solution casting in different solvents as well as compression molding and subjected to photo–aging under ultraviolet (UV) irradiation. The influence of the preparation m...

(This article belongs to the Special Issue Durability and Life time of Polymers, Composites and Nanocomposites)
  • Article
  • Open Access
12 Citations
6,289 Views
19 Pages

10 February 2019

Titanium dioxide/poly(δ-valerolactone) (TiO2/Pδ-VL) nanohybrid material containing interconnected pores with sizes in the range 80–150 μm were prepared by the solvent casting and polymer melting routes, and the dispersion of the...

(This article belongs to the Special Issue Advances in Hybrid Biomaterials)
  • Article
  • Open Access
840 Views
16 Pages

Eco-Friendly Solvent-Based Fabrication of Single-Layer and Polydopamine-Modified Bilayer PVDF-HFP Membranes

  • Tridwip Sen,
  • Eesh Kulshrestha,
  • Muhammad Usman Yousaf,
  • Minwoo Jung and ,
  • Tequila A. L. Harris and
  • Isabel C. Escobar
  • + 1 author+ 0 author

13 September 2026

Polymeric membrane systems have emerged as an effective approach for water separations due to their high separation efficiency, simplicity, and adaptability to a wide range of water treatment applications. However, traditional membrane fabrication pr...

(This article belongs to the Collection Polymeric Membranes: Science, Materials and Applications)
  • Article
  • Open Access
6 Citations
6,092 Views
13 Pages

Feasibility of Processing Hot-Melt Pressure-Sensitive Adhesive (HMPSA) with Solvent in the Lab

  • Jing Xue,
  • Jing Wang,
  • Haofei Huang,
  • Ming Wang and ,
  • Yali Zhang and
  • Lijuan Zhang
  • + 1 author+ 0 author

8 September 2021

Hot-melt pressure-sensitive adhesive (HMPSA) is an environmentally benign adhesive which is typically processed without solvent in industries. However, casting solution method is commonly used for experimental purposes in the lab for convenience. The...

(This article belongs to the Section Materials Processes)
  • Article
  • Open Access
2 Citations
847 Views
33 Pages

Influence of Fabrication Techniques on the Physicochemical, Textural, Release and Skin Delivery Performance of Polyvinyl Alcohol-Based Transdermal Films Containing Menthol: A Comparative Study

  • Gintaras Matulis,
  • Yuliia Maslii,
  • Nataliia Herbina,
  • Mindaugas Marksa and ,
  • Agnė Mazurkevičiūtė and
  • Jurga Bernatoniene
  • + 1 author+ 0 author

Background: Transdermal films are promising dosage forms for controlled delivery of active pharmaceutical ingredients through the skin. Polyvinyl alcohol (PVA)-based matrices are particularly attractive due to their biocompatibility, film-forming abi...

(This article belongs to the Special Issue Polymeric Films as a Multipurpose Drug Delivery System: Application, Properties, Preparation and Evaluation)
  • Review
  • Open Access
39 Citations
11,695 Views
17 Pages

Orodispersible Film (ODF) Platform Based on Maltodextrin for Therapeutical Applications

  • Irma E. Cupone,
  • Andrea Sansone,
  • Fabio Marra,
  • Andrea M. Giori and
  • Emmanuele A. Jannini

22 September 2022

Orodispersible film (ODF) is a new dosage form that disperses rapidly in the mouth without water or swallowing. The main ingredient of an ODF is a polymer that can be both of natural or synthetic origin. Maltodextrin is a natural polymer, mainly used...

(This article belongs to the Special Issue Development of Orally Dispersible Dosage Forms)
  • Review
  • Open Access
141 Citations
8,842 Views
14 Pages

19 October 2019

Nanotechnology is playing a pivotal role in improving quality of life due to its versatile applications in many areas of research. In this regard, nanoparticles have gained significant importance. Zinc oxide nanoparticles (ZnO NPs) amongst other nano...

  • Article
  • Open Access
63 Citations
8,020 Views
11 Pages

Comparing Properties of Variable Pore-Sized 3D-Printed PLA Membrane with Conventional PLA Membrane for Guided Bone/Tissue Regeneration

  • Hao Yang Zhang,
  • Heng Bo Jiang,
  • Jeong-Hyun Ryu,
  • Hyojin Kang and ,
  • Kwang-Mahn Kim and
  • Jae-Sung Kwon
  • + 1 author+ 0 author

27 May 2019

The aim of this study was to fabricate bioresorbable polylactide (PLA) membranes by 3D printing and compare their properties to those of the membranes fabricated by the conventional method and compare the effect of different pore sizes on the propert...

(This article belongs to the Section Biomaterials)
  • Review
  • Open Access
59 Citations
15,636 Views
23 Pages

11 February 2021

Biodegradable and antimicrobial waterborne polyurethane dispersions (PUDs) and their casted solid films have recently emerged as important alternatives to their solvent-based and non-biodegradable counterparts for various applications due to their ve...

(This article belongs to the Special Issue Advanced Biodegradable Polymers)
  • Article
  • Open Access
22 Citations
5,609 Views
14 Pages

A Facile Method for the Non-Covalent Amine Functionalization of Carbon-Based Surfaces for Use in Biosensor Development

  • Ffion Walters,
  • Muhammad Munem Ali,
  • Gregory Burwell,
  • Sergiy Rozhko and ,
  • Zari Tehrani,
  • Ehsaneh Daghigh Ahmadi,
  • Jon E. Evans,
  • Hina Y. Abbasi,
  • Ryan Bigham and
  • Owen J. Guy
  • + 8 authors+ 3 authors

10 September 2020

Affinity biosensors based on graphene field-effect transistor (GFET) or resistor designs require the utilization of graphene’s exceptional electrical properties. Therefore, it is critical when designing these sensors, that the electrical proper...

(This article belongs to the Special Issue Carbon-Based Nanomaterials for (Bio)Sensors Development)
  • Article
  • Open Access
149 Citations
8,589 Views
13 Pages

12 April 2020

Biocomposites based on poly(lactic acid) (PLA) and biochar (BC) particles derived from spent ground coffee were prepared using two different processing routes, namely melt mixing and solvent casting. The formulated biocomposites were characterized th...

(This article belongs to the Special Issue Mechanical and Advanced Properties of Polymers)
  • Article
  • Open Access
12 Citations
3,992 Views
10 Pages

10 October 2024

Graphene oxide (GO) is a promising material due to its high mechanical strength, electrical conductivity, and optical transparency, making it suitable for applications like optoelectronics and energy storage. This study focuses on a simplified method...

(This article belongs to the Topic Application of Graphene-Based Materials, 2nd Edition)
  • Article
  • Open Access
39 Citations
13,315 Views
22 Pages

In this work we present a method to manufacture flat sheet membranes with a thin isoporous block copolymer (BCP) layer (thickness <3 µm) by profile roller coating (breadth: 30 cm) on top of a porous support membrane. Highly diluted BCP-solut...

(This article belongs to the Section Polymeric Membranes)
  • Article
  • Open Access
3 Citations
1,742 Views
16 Pages

11 April 2025

In this work, we have employed an advanced method of solvent vapor annealing to expose spin-cast thin films made from various lamellar and micellar block copolymers to generous amounts of different types of solvent vapors, with the final goal of stim...

(This article belongs to the Section Polymeric Materials)
  • Article
  • Open Access
104 Views
21 Pages

Fatty Acid Profiling and Nutritional Quality of Fresh and Storm-Cast Fucus vesiculosus Extracts Obtained by Ultrasound-Assisted Menthol: Thymol Hydrophobic Deep Eutectic Solvent

  • Ekaterina D. Obluchinskaya,
  • Fatima A. Bichkaeva,
  • Anna V. Daurtseva,
  • Nina F. Baranova and ,
  • Vladislav A. Zhenikhov and
  • Olga N. Pozharitskaya
  • + 1 author+ 0 author

14 November 2026

Storm-cast macroalgae represent an abundant and renewable biomass source, but environmental degradation and the thermal instability of lipids limit their utilization. This study evaluates an ultrasound-assisted extraction method using a hydrophobic d...

(This article belongs to the Special Issue Development of Algal Biotechnology, Second Edition)
  • Article
  • Open Access
16 Citations
4,816 Views
14 Pages

25 August 2023

The aim of the study was the preparation and comparison of two types of orodispersible gel films (ODF) by the solvent casting method. Natural polymers: sodium alginate (ALG) or hydroxypropyl methylcellulose (HPMC) were used as the gel film formers, a...

(This article belongs to the Section Gel Processing and Engineering)
  • Article
  • Open Access
34 Citations
8,301 Views
14 Pages

Photostabilizing Efficiency of PVC in the Presence of Schiff Bases as Photostabilizers

  • Emad Yousif,
  • Ahmed A. Al-Amiery,
  • Abdulhadi Kadihum,
  • Abdul Amir H. Kadhum and
  • Abu Bakar Mohamad

4 November 2015

The photostabilization of polyvinyl chloride (PVC) films by Schiff bases was investigated. Polyvinyl chloride films containing 0.5 wt % Schiff bases were produced using the same casting method as that used for additive-free PVC films from tetrahydrof...

(This article belongs to the Section Photochemistry)
  • Article
  • Open Access
8 Citations
4,243 Views
16 Pages

13 February 2023

The widely used dyes in the pharmaceutical, chemical, and medical industries have brought about an intensive concern for the sustainable development of the environment. Membrane separation offers a versatile method for classified recycling and the re...

(This article belongs to the Section Resources and Sustainable Utilization)
  • Article
  • Open Access
11 Citations
4,268 Views
16 Pages

Development and Evaluation of Solid Dispersion-Based Sublingual Films of Nisoldipine

  • Yahya Alhamhoom,
  • Abhay Sharma,
  • Shivakumar Hagalavadi Nanjappa,
  • Avichal Kumar and ,
  • Anas Alshishani,
  • Mohammed Muqtader Ahmed,
  • Syeda Ayesha Farhana and
  • Mohamed Rahamathulla
  • + 3 authors+ 0 author

9 November 2023

Nisoldipine (NIS) is a calcium channel blocker that exhibits poor bioavailability (~5%) due to low aqueous solubility and presystemic metabolism in the gut wall. In this context, the present work aimed to develop NIS solid dispersion (NISSD)-based su...

(This article belongs to the Section Pharmaceutical Technology)
  • Article
  • Open Access
21 Citations
7,690 Views
14 Pages

16 April 2018

Self-healing superhydrophobic surfaces have been fabricated by casting and drying water-soluble amphiphilic polymer suspensions at room temperature through thermal reconstruction. When compared with previous methods, this approach exploits modified n...

(This article belongs to the Special Issue Superhydrophobic Coatings)
  • Feature Paper
  • Article
  • Open Access
37 Citations
7,568 Views
17 Pages

Herein we report on the synthesis of an N-annulated perylene diimide (PDI) disubstituted thieno[3,4-c]pyrrole-4,6-dione (TPD) molecular acceptor (PDI–TPD–PDI) by direct heteroarylation (DHA) methods. Three sets of DHA conditions that explore the effe...

(This article belongs to the Special Issue Direct (Hetero)Arylation: A New Tool for Organic Electronics)
  • Article
  • Open Access
4 Citations
3,139 Views
13 Pages

All-Polymer Solar Cells Sequentially Solution Processed from Hydrocarbon Solvent with a Thick Active Layer

  • Yajie Wang,
  • Chaoyue Zhao,
  • Ziqi Cai,
  • Lihong Wang and ,
  • Liangxiang Zhu,
  • Hui Huang,
  • Guoping Zhang,
  • Peng You,
  • Chen Xie and
  • Guangye Zhang
  • + 9 authors+ 4 authors

18 August 2023

Organic solar cells (OSCs) have gained increasing attention. Among the various directions in OSCs, all-polymer solar cells (all-PSCs) have emerged as a highly promising and currently active research area due to their excellent film formation properti...

(This article belongs to the Special Issue Polymer Films for Photovoltaic Applications II)
  • Article
  • Open Access
12 Citations
2,853 Views
16 Pages

5 May 2024

As a new form for supplying vitamin C, orally disintegrating films (ODFs) were developed C based on hyaluronic acid (HA) under varying casting conditions and the properties were analyzed. The films with different thicknesses (2, 3, and 8 mm, for CT2,...

(This article belongs to the Section Food Engineering and Technology)
  • Article
  • Open Access
8 Citations
3,671 Views
15 Pages

Common methods for fabricating membrane-based scaffolds for tissue engineering with (hydrophobic) polymers include thermal or liquid-phase inversion, sintering, particle leaching, electrospinning and stereolithography. However, these methods have lim...

(This article belongs to the Section Membrane Applications)
  • Article
  • Open Access
6 Citations
3,040 Views
20 Pages

Exploring Vacuum Compression Molding as a Preparation Method for Flexible-Dose Pediatric Orodispersible Films

  • Dana Hales,
  • Cătălina Bogdan,
  • Lucia Ruxandra Tefas,
  • Andreea Cornilă and ,
  • Maria-Andreea Chiver,
  • Ioan Tomuță,
  • Tibor Casian,
  • Rareș Iovanov,
  • Gábor Katona and
  • Sonia Iurian
  • + 6 authors+ 1 author

In recent years, solid dosage forms have gained interest in pediatric therapy because they can provide valuable benefits in terms of dose accuracy and stability. Particularly for orodispersible films (ODFs), the literature evidences increased accepta...

(This article belongs to the Section Pharmaceutical Technology)
  • Communication
  • Open Access
5 Citations
3,306 Views
12 Pages

2 June 2024

The aim of this study was to obtain films based on sodium alginate (SA) for disintegration in the oral cavity. The films were prepared with a solvent-casting method, and meloxicam (MLX) as the active ingredient was suspended in a 3% sodium alginate s...

(This article belongs to the Special Issue Chemical Properties and Application of Gel Materials)
  • Article
  • Open Access
19 Citations
9,824 Views
13 Pages

Physical, Thermal, and Mechanical Characterization of PMMA Foils Fabricated by Solution Casting

  • Sneha Samal,
  • Barbora Svomova,
  • Monika Spasovová,
  • Ondřej Tyc and ,
  • David Vokoun and
  • Ivo Stachiv
  • + 1 author+ 0 author

11 January 2023

The physical, thermal, structural, and mechanical properties of poly(methyl methacrylate) PMMA foils cast from solutions of toluene were investigated by differential scanning calorimetry, optical microscope, Fourier infrared spectroscopy, and dynamic...

(This article belongs to the Section Materials Science and Engineering)

of 9