Phospholipase D (PLD) genes play key roles in plant abiotic stress responses, but the systematic identification of the maize (Zea mays) PLD family and its cold tolerance mechanism remain unclear. Using 26 maize genomes (pangenome), we identified 21 Z...
Diverse metabolic disorders have been associated with an alteration of N-acylethanolamine (NAE) levels. These bioactive lipids are synthesized mainly by N-acylphosphatidylethanolamine-selective phospholipase D (NAPE-PLD) and influence host metabolism...
Phospholipase Ds (PLDs) are important phospholipid hydrolases in plants that play crucial roles in the regulation of plant growth, development, and stress tolerance. In this study, 14 PLD genes were identified in the tomato genome and were localized...
We present a two-step physical method for the fabrication of composite nanoparticle-based nanostructures. The proposed method is based on the pulsed laser deposition (PLD) technique performed sequentially in vacuum and in air. As a first step, thin-a...
Two-dimensional film materials with unique atomic structures and electronic operation modes have demonstrated amazing application potential and value in the field of high technology. Among the various methods for preparing 2D film materials, PLD tech...
Mapping B and T cell epitopes constitutes an important action for peptide vaccine design. PLD and CP40 virulence factors of Corynebacterium pseudotuberculosis biovar ovis, a causal agent of Caseous Lymphadenitis, have been evaluated in a murine model...
The deposition of thin films of bioactive materials is the most common approach to improve the bone bonding ability of an implant surface. With this purpose, several wet and plasma assisted deposition methods were proposed in the scientific literatur...
Diacylglycerol kinase β (DGKβ) is an enzyme that converts diacylglycerol to phosphatidic acid and is mainly expressed in the cerebral cortex, hippocampus and striatum. We previously reported that DGKβ induces neurite outgrowth and spin...
In this study, we aimed to elucidate the anti-invasive effects of Cudrania tricuspidata root-gold nanoparticles (CTR-GNPs) using glioblastoma cells. We demonstrated the rapid synthesis of CTR-GNPs using UV-vis spectra. The surface morphology, crystal...
Objective: While PLD-Trabectedin is an approved treatment for relapsed platinum-sensitive ovarian cancer, its efficacy and tolerability has so far not been tested extensively in patients who progress after poly ADP-ribose polymerase inhibitor (PARPi)...
Pulsed laser deposition (PLD) is widely used for functional film fabrication, but traditional nanosecond-laser-induced thermal effects and interface roughness severely limit the quality of multilayer structures. To address this critical challenge, a...
Cadmium selenide (CdSe) thin films were deposited on indium tin oxide (ITO) coated glass substrates using pulsed laser deposition (PLD) technique under different growth temperatures. Samples were investigated for their structural, morphological, and...
In 2008, the modified European Restriction of Hazardous Substances (RoHS) directive prohibited the use of hazardous substances such as lead, cadmium, and mercury. As such, an urgent need for lead-free components emerged in Europe. In this frame, we h...
Aluminum-doped ZnO (AZO) has huge prospects in the field of conductive electrodes, due to its low price, high transparency, and pro-environment. However, enhancing the conductivity of AZO and realizing ohmic contact between the semiconductor and AZO...
We previously described the participation of canonical phospholipase D isoforms (PLD1 and PLD2) in the inflammatory response of retinal pigment epithelium (RPE) cells exposed to high glucose concentrations (HG). Here, we studied the role of the PLD p...
Phospholipase D (PLD) is the most important phospholipid hydrolase in plants, which can hydrolyze phospholipids into phosphatidic acid (PA) and choline. When plants encounter low temperature, drought and high salt stress, phospholipase D and its prod...
Background/Objectives: This study examined the effect of sound preference on loudness tolerance (LTLs) and preferred listening levels (PLLs) using personal listening devices (PLDs). The implication of this relationship on hearing health promotion cou...
Oxides, borides and carbides of the transition elements are materials of great interest from a technologic point of view. Many of these materials are used in the form of thin films, so several techniques are commonly used to deposit them. Among these...
Cell migration is a crucial contributor to metastasis, a critical process associated with the mortality of cancer patients. The initiation of metastasis is triggered by epithelial–mesenchymal transition (EMT), along with the changes in the expr...
23 April 2020
Given the concern regarding increased hearing loss in young people who use personal listening devices (PLDs), the present study analyzes the experience of PLDs among college students to identify their knowledge of and attitude toward hearing conserva...
Currently, pulsed laser deposition (PLD) is a widely used technique to grow thin films for academic research and for industrial applications. The PLD has superior advantages including versatility, control over the growth rate, stoichiometric transfer...
Glycerol is used in many skin care products because it improves skin function. Anecdotal reports by patients on the National Psoriasis Foundation website also suggest that glycerol may be helpful for the treatment of psoriasis, although to date no ex...
Hemiscorpius lepturus (H. lepturus) which belongs to the Scorpionidae family, is the deadliest scorpion in Iran. It causes pathological manifestations like dermonecrosis, hemolysis, renal failure, necrotic ulcers, and in some cases, even death. The v...
This work focuses on the dependence of the features of PbS films deposited by pulsed laser deposition (PLD) subsequent to the variation of the background pressure of helium (PHe). The morphology of the PLD-PbS films changes from a densely packed and...
Background: Patients with endocrine-resistant metastatic breast cancer (MBC) require cytostatic therapy. Single-agent taxanes and anthracyclines, including pegylated liposomal doxorubicin (PLD), are standard treatment options. There are no prospectiv...
Cu2ZnSnS4 (CZTS) is a complex quaternary material, and obtaining a single-phase CZTS with no secondary phases is known to be challenging and dependent on the production technique. This work involves the synthesis and characterization of CZTS absorber...
Pulsed Laser Deposition (PLD) is a highly flexible experimental methodology for the growth of thin films of a broad variety of materials, based on the generation of laser-induced plasmas (LIP) with material ablated from a solid target and on the tran...
The influence of sensitive porous films obtained by pulsed laser deposition (PLD) on the response of surface acoustic wave (SAW) sensors on hydrogen at room temperature (RT) was studied. Monolayer films of TiO2 and bilayer films of Pd/TiO2 were depos...
27 September 2017
Background: Hearing loss is defined as worsening of hearing acuity and is usually expressed as an increase in the hearing threshold. Tinnitus, defined as “ringing in the ear”, is a common and often disturbing accompaniment of hearing loss. Hearing lo...
The expression of the endocannabinoid (eCB) system, including cannabinoid receptor type 1 (CB1R) and the cannabinoid synthesizing (NAPE-PLD) and degrading (FAAH) enzymes, has been well-characterized in the retina of rodents and monkeys. More recently...
(1) Background: Polycystic liver disease (PLD) is a heterogeneous group of congenital disorders characterized by bile duct dilatation and cyst development derived from cholangiocytes. Nevertheless, the cystogenesis mechanism is currently unknown and...
A delay-line-type surface acoustic wave (SAW) sensor based on a zinc oxide (ZnO) sensitive layer was developed. Two types of sensitive layers were obtained: ZnO nanowires and ZnO thin films, both deposited using laser methods (VLS-PLD and PLD, respec...
We report on the deposition and characterization of hafnium silicate and aluminium silicate thin films for different applications in optics and electronics. Pulsed laser deposition in a controllable oxygen atmosphere was used as a processing techniqu...
The aspects of low processing temperature and easy running in oxygen atmosphere contribute to the potential of pulsed laser deposition (PLD) in developing a-IGZO TFTs for flexible applications. However, the realization of low-temperature and high-per...
Visual simultaneous localization and mapping (SLAM), based on point features, achieves high localization accuracy and map construction. They primarily perform simultaneous localization and mapping based on static features. Despite their efficiency an...
The structural properties of VO2 thin films, grown on either LSAT or Si substrates by pulsed laser deposition (PLD), are elucidated by means of transmission electron microscopy (TEM) methods. The TEM observations confirmed the successful growth of VO...
High-quality AZO thin films were produced on a 4-inch Si substrate using large-area PLD equipment at a substrate temperature of 330 °C, with a ZnO: Al (98:2 wt.%) target. This study aims to enhance the electrical, optical, morphological and struc...
The effects of drought stress on phospholipase D (PLD) gene expression and enzymatic activity were investigated in ‘Pineapple’ sweet orange. PLDs are tissue-specific, with overlapping functions, and in response to stress they may interact...
Background: Phospholipase (PL)D1 is crucial for integrin αIIbβ3 activation of platelets in arterial thrombosis and TNF-α-mediated inflammation and TGF-β-mediated collagen scar formation after myocardial infarction (MI) in mice....
In this study, the stress analysis of YBCO/CeO2/YSZ/CeO2/Ni architextured materials under cryogenic conditions was carried out for coated conductor applications. YBCO/CeO2/YSZ/CeO2 multilayer films were fabricated on Ni tape substrate using reel-to-r...
The modification of implant devices with biocompatible coatings has become necessary as a consequence of premature loosening of prosthesis. This is caused mainly by chronic inflammation or allergies that are triggered by implant wear, production of a...
The purpose of this research is to meet current technical and ecological challenges by developing novel steel coating systems specifically designed for mechanical equipment used in aggressive acid conditions. Homogeneous sandwich-type layered films o...
Cancer treatment has been greatly improved by the combined use of targeted therapies and novel biotechnological methods. Regarding the former, pegylated liposomal doxorubicin (PLD) has a preferential accumulation within cancer tumors, thus having low...
In this study, samarium (Sm-10at%)-doped BiFeO3 (SmBFO) thin films were grown on platinum-coated glass substrates using pulsed laser deposition (PLD) to unveil the correlation between the microstructures and nanomechanical properties of the films. Th...
Among all the inorganic perovskites, cesium lead bromide (CsPbBr
Chilling injury is especially prominent in postharvest bananas stored at low temperature below 13 °C. To elucidate better the relationship between cell membrane lipids and chilling injury, an untargeted lipidomics approach using ultra-performance...
In this paper, we report on the effect of titanium dioxide (TiO2) target sintering temperature on the morphological and optical properties of amorphous titanium dioxide thin films synthesized by pulsed laser deposition (PLD) on indium tin oxide (ITO)...
Nano-drugs based on nanoparticles (NP) or on nano-assemblies as carriers of the active pharmaceutical ingredient (API) are often expected to perform better compared to conventional dosage forms. Maximum realization of this potential though requires o...
Novel biomaterials with promising bone regeneration potential, derived from rich, renewable, and cheap sources, are reported. Thus, thin films were synthesized from marine-derived (i.e., from fish bones and seashells) hydroxyapatite (MdHA) by pulsed...
Indium tin oxide (ITO) thin films were grown on nanopatterned glass substrates by the pulsed laser deposition (PLD) technique. The deposition was carried out at 1.2 J/cm2 laser fluence, low oxygen pressure (1.5 Pa) and on unheated substrate. Arrays o...
of 11