- Article
In accelerated bridge construction (ABC), prefabricated bridge deck elements are merged using “closure joints.” Because of the cast-in-place nature of closure joints that are expected to go into service rapidly and problems observed for s...
In accelerated bridge construction (ABC), prefabricated bridge deck elements are merged using “closure joints.” Because of the cast-in-place nature of closure joints that are expected to go into service rapidly and problems observed for s...
Prefabricated concrete bridge deck panels are utilized in Accelerated Bridge Construction (ABC) to simplify bridge deck construction. Concrete with good bond and shear strength as well as excellent flowability is required to fill bridge deck closure...
Modern bridge construction towards a higher degree of low carbonization and assembly has been the general trend, while developing and broadening the low-carbon and assembled-oriented Accelerated Bridge Construction (ABC) technology can better realize...
The application of Accelerated Bridge Construction methods (ABC) to build, renovate and rehabilitate aging bridges is most likely to reduce the economic and social impacts of projects. This is especially relevant in countries with severe winter clima...
Through the partnership between the Hawaii Department of Transportation (HDOT) and the Central Federal Lands Highway Division (CFLHD) of the Federal Highway Administration, six of the bridge structures along the State-owned portion of the Hana Highwa...
Ultra-high performance concrete (UHPC) is a durable material that allows the construction of innovative structural elements and conforms with accelerated bridge construction (ABC) goals. The main idea of this research is to utilize UHPC to prefabrica...
Accelerated Bridge Construction (ABC) is bridge construction that uses innovative planning, design and construction methods in a safe and cost-effective manner, which reduces construction mobility and environmental impacts, and contributes to city su...
Accelerated Bridge Construction (ABC) projects in the United States (U.S.) have consistently demonstrated the significant advantages of prefabrication over conventional construction methods. Since the early 2010s, the adoption of ABC has expanded ste...
Fully prefabricated bridge construction technology has gradually replaced traditional cast-in-place methods, becoming a core approach for efficient, environmental, and intelligent construction of bridges in cities. However, due to city-embedded restr...
Over 35% of bridges in the United States are currently rated in fair or poor condition, highlighting ongoing challenges in maintaining safety and performance amid aging infrastructure, limited budgets, and extended repair timelines. While Accelerated...
Various methods have been developed to produce deck slabs for steel–concrete composite bridges. Usually, the deck slabs are cast with in situ concrete using a formwork carriage, resulting in construction progress of 15 to 25 m of deck slab per...
The simple for dead load and continuous for live load (SDCL) steel bridge system offers an accelerated construction solution for steel bridges. The available details for the SDCL steel bridge system consist of a cast-in-place normal strength concrete...
Most of the bridges and viaducts in the Netherlands were built in the sixties and seventies of the last century, and an increasing number of them will have to be replaced due to technical or functional reasons. The Netherlands is not an exception, ma...
Aluminium remains relatively uncommon in civil structures; however, its durability and light-weight nature make it an attractive alternative for vehicular bridges. Recent applications use aluminium bridge decks supported by steel girders. However, ga...
Full-depth precast bridge decks are widely used to expedite bridge construction and enhance durability. These deck systems face the challenge that their durability and performance are usually dictated by the effectiveness of their field joints and cl...
Accelerated bridge construction (ABC) has attracted much attention in China as a new and efficient construction method. However, the seismic performance of the connections between precast piers and other structures limits the application of ABC in me...
Due to the significant advantages of steel-concrete composite beams, they are widely used for accelerated bridge construction (ABC). However, there is still a lack of experimental research on the proper design of ABC, especially in the slip with a di...
Traditional expansion joints in bridge structures are prone to durability problems, such as leakage, corrosion, and high maintenance demands, which can significantly reduce service life. To overcome these limitations, ultra-high-performance concrete...
Field-cast ultra-high performance concrete (UHPC) connections are an innovative and prospective solution for combining full-depth precast concrete decks and steel girders. However, previous studies show that the slip capacity of stud shear connectors...
Polymer concretes with fiber reinforcement have many desirable properties when compared to cementitious concretes, including rapid development of mechanical properties, excellent bond to concrete and other substrates, high tensile strength, and resis...
Using a two-axle test vehicle, a new drive-by-based bridge damage identification method is proposed in this study. The method firstly obtains the vehicle acceleration response of a vehicle passing through an undamaged bridge and a damaged bridge; the...
With the acceleration of transportation infrastructure and the densification of transportation networks, there has been an increase in bridge pile construction near oil and gas pipelines. Selecting bridge pile construction methods with minimal impact...
To evaluate the importance of the site effects of large structures such as the new Belvedere Bridge (L’Aquila), which crosses a 25 m deep and 100 m valley in the city, one-dimensional and two-dimensional analyses were used to model the seismic...
To study the standardized evaluation method of vibration comfort of pedestrian bridges, the effect of the transient response term is ignored based on the generalized single degree of freedom (SDOF) method with reference to the American Institution of...
To improve the driving comfort of continuously variable transmission (CVT) tractors, the shifting quality of hydrostatic power-split transmission with a standard planetary gear set was optimized. Firstly, the powertrain of the CVT and two shift strat...
Structural health monitoring (SHM) techniques are used to assess the behavior of structures during or after construction. The high cost of sensors is the main reason for the limited use of the SHM techniques. The present study investigates the dynami...
In the design of cantilever method bridge anti-overturning structures, the appropriate gap between the supporting foot and the lower rotating table is a crucial factor. It affects the distribution of the upper load and the friction force of the rotat...
Bridge management systems (BMSs) are widely used to assist an inspector in performing element-level bridge inspection. Retrieving and determining target elements to be inspected becomes an important factor in the efficiency of bridge inspection. This...
A dynamic computational program considering slip, shear-lag and time-dependent effects of composite box-girder bridge–train coupling system is firstly proposed based on the authors’ previous studies. In the program, the long-term vertical...
Erosion is a natural process, but it can be accelerated by anthropogenic activities. Two of the predominant types of human-induced erosion are related to agricultural and construction activities. Of the two, construction-induced erosion is more sever...
Although China has promoted the construction of Chinese Sustainable Ground Transportation (CSGT) to guide sustainable development, it may create substantial challenges, such as rapid urban growth and land limitations. This research assessed the effec...
As an important part of road transportation, bridge engineering plays a pivotal role in infrastructure construction. The wind field characteristics of the bridge site area have an essential influence on both the construction and operation period of t...
This study carries out a detailed full-scale investigation on the strong wind characteristics at a cable-stayed bridge site and associated buffeting response of the bridge structure during construction, using a field monitoring system. It is found th...
The deterioration of concrete bridge decks is a long-term complex phenomenon that is difficult to examine using traditional inspection methods. Variables such as environmental exposure and traffic volume affect the condition of the deck throughout th...
The infrastructure construction of bridges is growing rapidly, and the quality of concrete structures is becoming increasingly stringent. However, the issue of cracks in concrete structures remains prominent. In on-site bridge crack detection, the tr...
Identifying bridge damage using a movable test vehicle is highly regarded for its mobility, cost-effectiveness, and broad monitoring coverage. Previous studies have shown that the residual contact-point (CP) response between connected vehicles is fre...
Authorities responsible for critical infrastructure, particularly bridges, face significant challenges. Many bridges, constructed in the 1960s and 1970s, are now approaching or have surpassed their intended service life. A report from the German Fede...
To investigate the impact of vehicle load on highway pile–slab bridges, the contact constraint method is employed to treat the vehicle and the bridge as two independent subsystems. Through the formulation of point-to-surface contact and constra...
Data fusion is an important issue in bridge health monitoring. Through data fusion, specific unknown bridge responses can be estimated with measured responses. However, existing data fusion methods always require a precise finite element model of the...
In this study, a series of comprehensive experimental tests were conducted to assess the impact of permanent displacements observed during the construction of the Cho’ponota L1 Bridge in Uzbekistan and to evaluate the bridge’s structural...
Prestressed concrete composite girder bridges with corrugated steel webs (PCCGBCSWs) are extensively employed in bridge construction because of their low dead weight, fast construction, and high prestressing efficiency. Moreover, PCCGBCSWs will exper...
This paper investigates the analytical results of the seismic response of multi-span prestressed concrete (PSC) I-girder bridges under seismic loads. To perform numerical analyses, a three-span PSC I-girder bridge with a width of 12 m, a total length...
Enhanced quality and reduced on-site construction time are the basic features of prefabricated bridge elements and systems. Prefabricated lightweight bridge decks have already started finding their place in accelerated bridge construction (ABC). Ther...
The construction of highway bridges using continuous precast prestressed concrete girders provides an economical solution by minimizing formwork requirements and accelerating construction. Different ways can be used to integrate bridge continuity and...
United States State Highway Agencies (SHAs) use Incentive/Disincentives (I/D) to minimize negative impacts of construction on the traveling public through construction acceleration. Current I/D practices have the following short-comings: not standard...
The investigation into advanced structural materials, such as composite materials, has revealed numerous possibilities within the field of bridge engineering. Glass-fiber-reinforced polymers (GFRPs) are notable among these materials, particularly in...
Double-shield TBM is more efficient than shield tunnel construction in hard rock strata. It is widely used in subway tunnel construction, such as in Qingdao and Chongqing in China. However, construction vibration problems caused by double-shield TBM...
This study investigates the Huangdong Daning River Bridge project in Guangxi, where the innovative side-span and mid-span synchronous closure technology for continuous rigid-frame bridges (CRFB) was systematically implemented for the first time in th...
For the purpose of maintaining and prolonging the service life of civil constructions, structural damage must be closely monitored. Monitoring the incidence, formation, and spread of damage is crucial to ensure a structure’s ongoing performance...
The assessment of infrastructure integrity is considered paramount to verify its structural health and to build its resilience. In this study, a monitoring strategy, consisting of a pre-developed microcontroller-based data acquisition system (DAQ) ha...
of 4