A compact electrochemical sensor module for pH detection was developed for potential integration into specialized devices used for live cell or tissue incubation, for applications in highly parallelized cell culture analysis, by incorporating Organ-o...
Because soybean is sensitive to salt stress, it is necessary to improve their stress tolerance. Titanium-oxide nanoparticles (TiO2 NPs) enhanced the growth of soybean under salt stress. To elucidate the promotive effects of TiO2 NPs on soybean growth...
A compact pH measuring electrochemical sensor module was developed for Smart Multi-Well Plates (SMWP) applicable for highly parallelized cell culture analysis using incorporated Organ-on-Chip devices. A specific electronic architecture was designed a...
Power loss is a limiting factor for batteries and individual cells. The resulting heat generation due to the power loss leads to reduced battery performance and, thus, lower efficiency. These losses are largely due to the internal resistance of the c...
In 2012, a novel superconductor BaTi2Sb2O was found in the layered titanium pnictide oxides ATi2Pn2O. A related superconductor BaTi2Bi2O was subsequently discovered in 2013. The structure of these materials consists of alternate stacking of supercond...
Titanium oxyfluoride (TiOF2) is a metastable product that can be obtained in a fluorine-rich environment. This material can also be a valuable precursor in the synthesis of titanium(IV) oxide (TiO2). However, the effect of TiOF2 morphology on the phy...
In this work, the titanium oxide nanodots arrays formation was carried out. A current-voltage characteristics study of nanodots showed that the resulting structure switches between high resistance and low resistance states. Additionally, we performed...
High-temperature oxidation was performed at temperatures from 600 to 750 °C over a period of 24 h and 72 h. It was shown in the study that the oxide scale became more homogeneous and covered the entire surface as the oxidation temperature increased....
In this paper, the possibility of color controlling anodic titanium oxide by changing anodizing conditions of titanium in an ethanol-based electrolyte is demonstrated. Colored anodic titanium oxide was fabricated in an ethanol-based electrolyte conta...
Recent improvements in advanced technology for toxic chemical remediation have involved the application of titanium oxide nanoparticles as a photocatalyst. However, the large energy bandgap associated with titanium oxide nanoparticles (3.0–3.20...
We report chemically tunable n-type titanium oxides using ethanolamine as a nitrogen dopant source. As the amount of ethanolamine added to the titanium oxide precursor during synthesis increases, the Fermi level of the resulting titanium oxides (etha...
Titanium oxide particles of various morphologies have been prepared for applications of scientific or industrial interest in recent decades. Besides development of novel synthetic routes and solid-state characterization of the obtained particles, col...
Porous transition metal oxides are widely studied as biocompatible materials for the development of prosthetic implants. Resurfacing the oxide to improve the antibacterial properties of the material is still an open issue, as infections remain a majo...
Nanotubular titanium oxide is widely known as a prospective semiconductor photocatalyst for the process of water splitting. Its photoelectrochemical (PEC) efficiency can be improved by doping with 3d metal. In this work, the synthesis of nanotubular...
We describe the magnetic properties of thin iron films deposited on the nanoporous titanium oxide templates and analyze their dependance on nanopore radius. We then compare the results to a continuous iron film of the same thickness. Additionally, we...
Among conductive oxide materials, niobium doped titanium dioxide has recently emerged as a stimulating and promising contestant for numerous applications. With carrier concentration tunability, high thermal stability, mechanical and environmental rob...
Atomic layer deposition (ALD) is a useful tool for producing ultrathin films and coatings of complex composition with high thickness control for a wide range of applications. In this study, the growth of zinc–titanium oxide nanofilms was invest...
The morphologies and local electronic structures of titanium coatings deposited on the surfaces of highly oriented pyrolytic graphite were determined. Chemical compositions of the oxides formed on the coating surfaces were established. A theoretical...
The influence of poly(titanium oxide) obtained using the sol-gel method in 2-hydroxyethyl methacrylate medium on the viscoelastic and thermophysical properties of interpenetrating polymer networks (IPNs) based on cross-linked polyurethane (PU) and po...
In this research, we attempted to modify the bandgap of anodic titanium oxide by in situ incorporation of selected elements into the anodic titanium oxide during the titanium anodization process. The main aim of this research was to obtain photoactiv...
The tensile properties, scratch behaviors and sliding wear of an oxide scale obtained on the surface of titanium Grade 2 in the process of isothermal oxidation at 600, 700 and 800 °C were determined in the study. It was shown that the intensity o...
Due to their beneficial characteristics, 1D nanowires have made significant advancements in different realms due to their large surface area, unique surface chemistry, and tunable transport properties. Herein, a comprehensive study of titanium oxide...
It is important for oral and maxillofacial surgeons to repair craniofacial defects on oral cancer patients or patients with congenital problems. Thus, it is a challenge to develop biomaterials that promote bone regeneration as potential materials for...
Well-arrayed zinc oxide nanorods applied as photoelectrodes for dye-sensitized solar cells were synthesized on an aluminum-doped zinc oxide substrate by the multi-annealing method. In order to improve the chemical stability and surface-to-volume rati...
Bacteria-related infections remain a leading cause of dental implant failures. Despite the successful history of titanium implants, naturally forming oxides lack antibacterial properties. Crystalline oxides, modified through anodization processes, ha...
Hydrogen is an efficient source of clean and environmentally friendly energy. However, because it is explosive at concentrations higher than 4%, safety issues are a great concern. As its applications are extended, the need for the production of relia...
The article presents the results of structural, corrosion, microbiological, biological, and genotoxicity studies on the effect of graphene oxide deposited on a flat titanium foil surface, intended for use, in general, implantology and other medical a...
Ruthenium incorporated titanium oxides (RuxTiO2) were prepared by a one-step hydrothermal method using Ti(SO4)2 and RuCl3 as the precursor of Ti and Ru, respectively. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission elect...
Background: Titanium implant surfaces are continuously modified to improve biocompatibility and to promote osteointegration. Graphene oxide (GO) has been successfully used to ameliorate biomaterial performances, in terms of implant integration with h...
Active dressings based on natural polymers are becoming increasingly popular on the market. One of such polymers is alginate, which is characterized by biodegradability, resorbability, has no carcinogenic properties, does not have allergenic or hemos...
Titanium alloys are difficult to machine and have poor tribological properties. Nanoparticles have good cooling and lubricating properties, which can be used in metal cutting fluid. The lubrication characteristics of the two-dimensional materials Ti3...
Titanium and its alloys are characterized by high biocompatibility and good corrosion resistance as a result of the ability to form a TiO2 oxide layer. However, based on literature data it can be concluded that titanium degradation products, in the f...
Titanium oxide (TiO2) is the most widely used white pigment because of its brightness and very high reflective index, traits surpassed by only a few other materials; it has gained adequate ground in the fabrication of solar cells due to its wide band...
Dental implants can be made of various materials, and amongst them, titanium and titanium alloy were the materials of choice for dental implants for many years because of their biocompatibility. The two alloys have a high level of biocompatibility, a...
Two widely used atomic layer deposition precursors, Tetrakis (dimethylamido) titanium (TDMA-Ti) and titanium tetrachloride (TiCl4), were investigated for use in the deposition of TiOx-based thin films as a passivating contact material for solar cells...
A novel method for preparing titanium powder by multi-stage reduction of TiO2 was proposed. Its core is the preparation of high-quality low-valent titanium oxide. In this paper, the effect mechanism of different sample preparation pressures on the pr...
Despite the well-known favorable chemical and mechanical properties of titanium-based materials for orthopedic and dental applications, poor osseointegration of the implants, bacteria adhesion, and excessive inflammatory response from the host remain...
Preventing or treating infections at implantation sites where the risk of bacterial contamination is high requires the development of intelligent drug delivery systems. The objective of this work was to develop a production method and characterizatio...
Constructing surface coatings is an effective way to improve the corrosion resistance and biocompatibility of magnesium alloy bioabsorbable implants. In this present work, a titanium oxide coating with a thickness of about 400 nm was successfully pre...
The article presents the latest results of the leaching of alkali from geopolymers depending on the introduced additions in the form of aluminum calcium cement and nanometric titanium oxide. Aluminum calcium cements were introduced in two variants: G...
Dyes present in industrial effluents have been treated by many methods, among which adsorption stands out for its high efficiency, low costs, simple operation processes, and the absence of hazardous byproducts. In this research, two adsorbents were o...
Titanium dioxide and zinc oxide are two of the most widely used nanomaterials. We assessed the effects of noncytotoxic doses of both nanomaterials on T98G human glioblastoma cells by omic approaches. Surprisingly, no effects on the transcriptome of T...
Despite the high biocompatibility and clinical effectiveness of Ti-based implants, surface functionalization (with complex osteointegrative/antibacterial strategies) is still required. To enhance the dental implant surface and to provide additional o...
To functionalize the surface of the NiTi alloy, hybrid layers comprising nanometric silica and titanium oxides were synthesized. The TiO2–SiO2 nanosystem was chemically prepared and utilized for electrophoretic deposition (EPD) to create multif...
In this study, graphene-oxide (GO)-reinforced Ti–Al–Sn–Zr–Mo–Nb–Si high-temperature titanium-alloy-matrix composites were fabricated by powder metallurgy. The mixed powders with well-dispersed GO sheets were obtain...
The syntheses, spectral UV–Vis, NMR, and electrochemical as well as photocatalytic properties of novel magnesium(II) and zinc(II) symmetrical sulfanyl porphyrazines with 2-(morpholin-4-yl)ethylsulfanyl peripheral substituents are presented. Both porp...
Mesozoic gabbro from the Stanovoy convergent margin and adakitic dacite lava from the Pliocene–Quaternary Bakening volcano in Kamchatka contain iron–titanium oxide–apatite–sulfide–sulfate (ITOASS) microinclusions along w...
Coatings with a thickness from ~40 to ~50 µm on Ti6Al4V titanium alloy were formed by micro-arc oxidation in a silicate-hypophosphite electrolyte with additions of graphene oxide. Micro-arc oxidation treatment was carried out in the anode&ndash...
Nano-fertilisers have only recently been introduced to intensify plant production, and there still remains inadequate scientific knowledge on their plant-related effects. This paper therefore compares the effects of two nano-fertilisers on common sun...
Silver nanoparticles doped on titanium oxide (TiO2) were produced by laser-liquid interaction of silver nitrate (AgNO3) in isopropanol. Characteristics of Ag/TiO2 (Ag doped TiO2) nanoparticles produced by the methods presented in this article were in...
of 55