Skip to Content

83 Results Found

  • Article
  • Open Access
249 Views
13 Pages

21 October 2026

Investigating pressure-dependent laser powder bed fusion (LPBF) requires equipment capable of performing repeated layer cycles in a sealed pressurized environment. This study describes a pressurized LPBF platform integrating internal powder feeding a...

(This article belongs to the Topic Additive Manufacturing: From Promise to Practice)
  • Article
  • Open Access
3 Citations
1,560 Views
19 Pages

Investigation of Ti65 Powder Spreading Behavior in Multi-Layer Laser Powder Bed Fusion

  • Zhe Liu,
  • Ju Wang,
  • Ge Yu,
  • Xiaodan Li and ,
  • Meng Li,
  • Xizhong An,
  • Jiaqiang Ni,
  • Haiyang Zhao and
  • Qianya Ma
  • + 4 authors+ 0 author

31 May 2025

Powder bed fusion using a laser beam (PBF-LB) offers a suitable alternative to manufacturing Ti65 with intricate geometries and internal structures in hypersonic aerospace applications. However, issues such as undesirable surface roughness, defect fo...

(This article belongs to the Section Materials Science and Engineering)
  • Article
  • Open Access
12 Citations
3,525 Views
16 Pages

18 May 2023

Laser powder–bed fusion (L-PBF) metal additive manufacturing has been widely utilized in various industries. However, large variability and inconsistent quality of the built parts still hinder the full potential of this manufacturing technology...

(This article belongs to the Section Computation and Simulation on Metals)
  • Article
  • Open Access
7 Citations
3,518 Views
19 Pages

23 July 2020

It is very important for a multilayer pellet bed to have a proper description of the radiant heat transfer and direct reduction process in the rotary hearth furnace. Ellipsoidal pellets may also be used in industrial production. The research on this...

(This article belongs to the Special Issue Numerical Modelling in Steel Metallurgy)
  • Article
  • Open Access
14 Citations
4,206 Views
20 Pages

23 April 2023

This study characterizes the mechanical performance of the AlSi10Mg alloy produced by powder bed fusion-laser beam (PBF-LB) subjected to two combined cycles consisting of multilayer coating deposition (electroless nickel (Ni-P) + diamond-like carbon...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
3,554 Views
16 Pages

6 December 2022

In this paper, a horn-shaped strip antenna exponentially tapered carved on a multilayer dielectric substrate for an indoor body position tracking system is proposed. The performance of the proposed antenna was verified by testing it as a tracking sta...

(This article belongs to the Section Radar Sensors)
  • Feature Paper
  • Article
  • Open Access
9 Citations
3,364 Views
18 Pages

Polyolefin Pyrolysis in Multilayer Fluidized Beds: An Innovative Approach to Obtain Valuable Alternative Fuels

  • Witold Żukowski,
  • Krystian Leski,
  • Gabriela Berkowicz-Płatek and
  • Jan Wrona

22 February 2024

This paper presents the application of two versions of the multilayer fluidized bed made out of two materials with significantly different densities. The first type of fluidized bed was composed of raw cenospheres and quartz sand. The second type of...

(This article belongs to the Collection Energy-Efficient Chemistry)
  • Article
  • Open Access
9 Citations
3,802 Views
23 Pages

13 May 2022

A numerical model was developed to simulate the real process of alumina powder bed selective laser processing (PBSLP) to thoroughly investigate the residual stress and distortion experienced in printed parts when multi-layer scanning with a CO2 laser...

(This article belongs to the Topic Material and Process Innovations for 3D Printing Applications)
  • Article
  • Open Access
16 Citations
3,963 Views
24 Pages

13 April 2021

This paper presents a numerical study that aims at investigating the effects of different parameters on the dynamic performance of single and multi-layer encapsulated phase material (PCM) thermocline tanks. A transient, one-dimensional, two-phase, co...

(This article belongs to the Section D: Energy Storage and Application)
  • Article
  • Open Access
5 Citations
5,713 Views
41 Pages

27 April 2018

Even though models of water quality have become increasingly detailed over time, their applicability to analyze long-term effect on sedimentary bed formation is yet to be clarified. Hence, an integrated, layer-resolved, process-based, sediment–water...

(This article belongs to the Section Water Quality and Contamination)
  • Review
  • Open Access
53 Citations
15,333 Views
32 Pages

14 March 2023

Packed-bed bioreactors are often used for aerobic solid-state fermentation, since the forced aeration supplies O2 and removes metabolic heat from the bed. Motivated by the potential for applications in biorefineries, we review studies conducted on pa...

(This article belongs to the Section Biological Processes and Systems)
  • Article
  • Open Access
6 Citations
2,708 Views
18 Pages

29 November 2024

This study utilized passive acoustic emissions from a fluidized bed containing spherical inert ABS particles, captured by an external piezoelectric microphone, to monitor fluidization agitation intensity. Acoustic signals were recorded during fluidiz...

(This article belongs to the Special Issue Drying Kinetics and Quality Control in Food Processing, 2nd Edition)
  • Article
  • Open Access
2 Citations
2,271 Views
16 Pages

Investigation of Gliding Walled Multilayer Waveguides

  • Mohsin Ali Shah Syed,
  • Junsheng Yu,
  • Yuan Yao and
  • Shanzah Shaikh

This article suggests a new waveguide design that utilizes a “walled” architecture. Instead of relying on conventional gap waveguide structures to create electronic bandgaps and prevent field leakage, the proposed design introduces a &ldq...

(This article belongs to the Special Issue Millimeter-Wave and Terahertz Technologies for Wireless Communications)
  • Article
  • Open Access
34 Citations
10,197 Views
21 Pages

Advanced Numerical Modeling of Sediment Transport in Gravel-Bed Rivers

  • Van Hieu Bui,
  • Minh Duc Bui and
  • Peter Rutschmann

17 March 2019

Understanding the alterations of gravel bed structures, sediment transport, and the effects on aquatic habitat play an essential role in eco-hydraulic and sediment transport management. In recent years, the evaluation of changes of void in bed materi...

(This article belongs to the Section Hydraulics and Hydrodynamics)
  • Article
  • Open Access
29 Citations
6,297 Views
12 Pages

Classification of Hydraulic Jump in Rough Beds

  • Ghorban Mahtabi,
  • Barkha Chaplot,
  • Hazi Mohammad Azamathulla and
  • Mahesh Pal

10 August 2020

This paper presents a classification using a decision tree algorithm of hydraulic jump over rough beds based on the approach Froude number, Fr1. Specifically, 581 datasets, from literature, were analyzed. Of these, 280 datasets were for natural rough...

(This article belongs to the Section Hydraulics and Hydrodynamics)
  • Article
  • Open Access
349 Views
20 Pages

Development and Experimental Assessment of a Reconfigurable Platform for Laser Processing Applications

  • António J. O. Ferreira,
  • Carlos Miranda,
  • Daniel Monteiro,
  • Lucas Martins and ,
  • Pedro M. O. Duarte,
  • António B. Pereira and
  • Fábio A. O. Fernandes
  • + 2 authors+ 0 author

30 August 2026

Commercial laser-processing systems are typically designed for a specific manufacturing process, limiting their adaptability in research and prototyping environments. This study presents the staged evolution of a laboratory-scale prototype originally...

(This article belongs to the Section Advanced Manufacturing)
  • Article
  • Open Access
16 Citations
4,146 Views
16 Pages

29 October 2021

To improve the quality of thick powder bed and realize the matching of thick powder bed and thin powder bed in the later stage, the influence of process parameters for the single-track, multi-layer fabrication, relative density, surface quality, defe...

  • Article
  • Open Access
8 Citations
3,409 Views
21 Pages

Research on Multiscale Numerical Simulation Method for SLM Melting Process

  • Fan Zou,
  • Shuguang Yao,
  • Yunhui Dong,
  • Xin Zheng and ,
  • Minhan Xie,
  • Lei Yang and
  • Dongtao Wang
  • + 2 authors+ 0 author

18 July 2024

In the selective-laser-melting process, it is difficult to monitor the evolution of the melt pool in real time via experimental methods due to the complexity and fine scale of laser–powder interaction; numerical simulation has become an importa...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
2 Citations
1,617 Views
28 Pages

26 February 2026

Powder-bed arc additive manufacturing (PBAAM) may reduce the cost of powder-bed metal additive manufacturing and enable thicker layers than laser powder bed fusion (LPBF), but melt-track stability limits are not well established. Here, 316L stainless...

(This article belongs to the Special Issue Additive Manufacturing of Metallic Materials: Experiments and Modelling)
  • Article
  • Open Access
40 Citations
10,323 Views
13 Pages

Self-Immobilizing Biocatalysts Maximize Space–Time Yields in Flow Reactors

  • Theo Peschke,
  • Patrick Bitterwolf,
  • Silla Hansen,
  • Jannis Gasmi and ,
  • Kersten S. Rabe and
  • Christof M. Niemeyer
  • + 1 author+ 0 author

8 February 2019

Maximizing space–time yields (STY) of biocatalytic flow processes is essential for the establishment of a circular biobased economy. We present a comparative study in which different biocatalytic flow reactor concepts were tested with the same...

(This article belongs to the Special Issue Flow Biocatalysis)
  • Article
  • Open Access
988 Views
18 Pages

Fall-from-Bed Risk Prediction Using Physics-Based Bed Simulation

  • Jaeyong Kim,
  • Hyeonwoo Kim,
  • Jihwan Won,
  • Jiwoon Lee and ,
  • Hyeonjung Kim,
  • Sunwoo Yeon,
  • Ryanghee Sohn,
  • Youngho Cho and
  • Cheolsoo Park
  • + 4 authors+ 0 author

9 May 2026

Fall-from-bed is a critical safety issue in hospitals and long-term care; however, large-scale real-fall data are rare, and collecting the data is ethically constrained. This study examined whether the fall-from-bed risk can be inferred from single s...

(This article belongs to the Special Issue AI-Enabled Sensing Technology for Smart Healthcare and Precision Diagnosis)
  • Article
  • Open Access
10 Citations
4,512 Views
30 Pages

2 July 2024

The purpose of this study was to empirically evaluate the performance of fibrous materials that meet the criteria for inlet air filtration in internal combustion engines. The characteristics of filtration efficiency and accuracy, as well as the chara...

(This article belongs to the Special Issue Advanced Designs of Materials, Machines and Processes in a Circular Economy)
  • Article
  • Open Access
507 Views
16 Pages

16 May 2026

To eliminate lack-of-fusion (LoF) defects at partition interfaces during laser powder bed fusion of titanium alloys, this study proposes a multi-layer, partitioned-scanning strategy with staggered interfaces. The strategy was optimized through an ort...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
10 Citations
2,850 Views
22 Pages

Machine Learning-Based Model Prediction of an Adsorption Desalination System and Investigation of the Impact of Parameters on the System’s Outputs

  • Taleb Zarei,
  • Masoud Chatavi,
  • Masoud Nazari,
  • Amirhossein Amirfakhraei and ,
  • Mohsen Salimi and
  • Majid Amidpour
  • + 1 author+ 0 author

22 December 2024

Adsorption desalination (AD) has emerged as a novel technique for desalination, which works cyclically and via switching, and various variables have an effect on its performance. This study uses machine learning procedures to present a model predicti...

(This article belongs to the Section Oceans and Coastal Zones)
  • Article
  • Open Access
9 Citations
3,477 Views
8 Pages

10 December 2021

Recently, a few computational methodologies and algorithms have been developed to simulate the microstructure evolution in powder bed fusion (PBF) additive manufacturing (AM) processes. However, none of these have attempted to simulate the grain stru...

(This article belongs to the Special Issue Numerical Simulation of Solidification Processes)
  • Article
  • Open Access
44 Citations
5,527 Views
16 Pages

27 August 2020

Initially, electrofacies were introduced to define a set of recorded well log responses in order to characterize and distinguish a bed from the other rock units, as an advancement to the conventional application of well logs. Well logs are continuous...

(This article belongs to the Section Earth Sciences)
  • Article
  • Open Access
14 Citations
4,638 Views
28 Pages

25 November 2020

This study intends to provide insights into various aspects related to the reaction kinetics of the VOx catalyzed propane dehydrogenation including main and side reactions and, in particular, catalyst deactivation and regeneration, which can be hardl...

(This article belongs to the Special Issue Design of Heterogeneous Catalysts and Adsorbents)
  • Article
  • Open Access
2 Citations
637 Views
46 Pages

Deformation Style and Structural Architecture of Faulted Well-Layered Platform Carbonates, Raparo Mt., Southern Italy

  • Aji Maina Kyari,
  • Ian Bala Abdallah,
  • Eugenia Romaniello,
  • Giacomo Prosser and
  • Fabrizio Agosta

The results of a multiscale study of fault and fracture geometry, distribution, density, and intensity are reported for Mesozoic platform carbonates cropping out along the axial zones of the southern Apennines fold-and-thrust belt, Italy. By integrat...

(This article belongs to the Section Structural Geology and Tectonics)
  • Feature Paper
  • Article
  • Open Access
9 Citations
4,801 Views
16 Pages

8 July 2021

Fused filament fabrication (FFF) is an inexpensive way of producing objects through a programmed layer-by-layer deposition. For multi-layer, macro-scaled prints, acceptable printing is achieved provided, amongst other factors, first layer adhesion is...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
15 Citations
4,257 Views
13 Pages

A Multichannel Superconductor-Based Photonic Crystal Optical Filter Tunable in the Visible and Telecom Windows at Cryogenic Temperature

  • Luz E. González,
  • Lina M. Segura-Gutierrez,
  • John E. Ordoñez,
  • Gustavo Zambrano and
  • John H. Reina

We design and evaluate the performance of a one-dimensional photonic crystal (PhC) optical filter that comprises the integration of alternating layers of a barium titanate ferroelectric (BaTiO3) and an yttrium oxide dielectric (Y2O3), with a critical...

(This article belongs to the Topic Optical and Optoelectronic Materials and Applications)
  • Article
  • Open Access
651 Views
27 Pages

Experimental and Theoretical Study of Ammonium Nitrogen Adsorption on Natural Zeolite Using Synthetic and Real Reverse Osmosis Pretreated Landfill Leachate

  • Eleftherios Mamalis,
  • Christina Vasiliki Lazaratou,
  • Varvara Sygouni,
  • Athanasia G. Tekerlekopoulou and
  • Dimitris V. Vayenas

16 July 2026

Natural zeolite was investigated for ammonium nitrogen (NH4+–N) removal from both synthetic aqueous solutions and real pretreated landfill leachate using batch and continuous-flow systems. Batch experiments were conducted at initial NH4+–...

(This article belongs to the Special Issue Advances in Research on Sustainable Waste Treatment and Technology)
  • Article
  • Open Access
2 Citations
3,219 Views
14 Pages

Additive Manufacturing of Electrically Conductive Multi-Layered Nanocopper in an Air Environment

  • David Pervan,
  • Anil Bastola,
  • Robyn Worsley,
  • Ricky Wildman and ,
  • Richard Hague,
  • Edward Lester and
  • Christopher Tuck
  • + 2 authors+ 0 author

25 April 2024

The additive manufacturing (AM) of functional copper (Cu) parts is a major goal for many industries, from aerospace to automotive to electronics, because Cu has a high thermal and electrical conductivity as well as being ~10× cheaper than silve...

(This article belongs to the Special Issue Editorial Board Members’ Collection Series: New Trends in Inorganic Nanoparticles and Composites from Preparation to Applications)
  • Article
  • Open Access
7 Citations
2,377 Views
12 Pages

12 December 2022

A fully transient discrete-source 3D Additive Manufacturing (AM) process model was coupled with a 3D stochastic solidification structure model to simulate the grain structure evolution quickly and efficiently in metallic alloys processed through Elec...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
3 Citations
10,190 Views
18 Pages

18 September 2015

As cloud computing data centers grow larger and networking devices proliferate; many complex issues arise in the network management architecture. We propose a framework for multi-layer; multi-vendor optical network management using open standards-bas...

(This article belongs to the Section Networks)
  • Article
  • Open Access
8 Citations
2,466 Views
22 Pages

Study on the Mechanism and Prevention of Frequent Mine Seismic Events in Goaf Mining under a Multi-Layer Thick Hard Roof: A Case Study

  • Bo Wang,
  • Guorui Feng,
  • Zhongxiang Gao,
  • Junpeng Ma and ,
  • Sitao Zhu,
  • Jinwen Bai,
  • Zhu Li and
  • Wenda Wu
  • + 3 authors+ 0 author

23 June 2023

Mine seismic events are an inevitable dynamic phenomenon occurring in deep mines. A scientific and rational method is needed to evaluate and understand mine seismicity and its induced disasters. In the Ordos mining area of North China, multiple group...

(This article belongs to the Topic Complex Rock Mechanics Problems and Solutions)
  • Article
  • Open Access
8 Citations
4,107 Views
14 Pages

4 November 2022

Fluoride pollution in water has been reported in many regions and countries. Adsorption is the most commonly used process for treating fluoride-containing water. For industrial applications, the treatment of a pollutant is normally performed in conti...

(This article belongs to the Special Issue Solid/Liquid Adsorption in Water and Wastewater Treatment)
  • Article
  • Open Access
14 Citations
4,713 Views
12 Pages

The relationship between sleep posture and sleep quality has been studied comprehensively. Over 70% of chronic diseases are highly correlated with sleep problems. However, sleep posture monitoring requires professional devices and trained nursing sta...

  • Article
  • Open Access
1,857 Views
11 Pages

Compact Monolithic Star Tracker System

  • Kamil Zuber,
  • Duncan Wright,
  • Jebum Choi,
  • Joni Sytsma and
  • Colin Hall

30 March 2026

A compact, low-cost star tracker system tailored for small satellite applications was designed and prototyped. The system was designed with a fast f/1.2 aperture, a 20 × 13° field of view, and a theoretical angular resolution of 10 arcs&mda...

(This article belongs to the Section Engineering Optics)
  • Article
  • Open Access
8 Citations
3,483 Views
23 Pages

29 June 2022

The purpose of this work was to develop a problem-solving approach and a simulation tool that is useful for the specification of wastewater treatment process equipment design parameters. The proposition of using an artificial neural network (ANN) num...

(This article belongs to the Section Resources and Sustainable Utilization)
  • Article
  • Open Access
607 Views
24 Pages

Internal temperature distributions in black tea fermentation regulate enzymatic oxidation, heat accumulation and fermentation uniformity, but continuous three-dimensional measurements remain difficult in practical processing. We developed a CFD-prior...

(This article belongs to the Special Issue Fermentation Processes: Modeling, Optimization and Control: 3rd Edition)
  • Article
  • Open Access
575 Views
26 Pages

Feedforward and Recurrent Neural Networks for Reliability-Aware Modeling of Chromium Breakthrough in Fixed-Bed Biosorption Columns

  • Alma Rosa Netzahuatl-Muñoz,
  • Juan Crescenciano Cruz-Victoria,
  • Erick Aranda-García and
  • Eliseo Cristiani-Urbina

29 July 2026

Breakthrough-curve prediction is central to fixed-bed biosorption column design, but data-driven modeling remains challenging with small, unevenly distributed datasets. This study compares a feedforward multilayer perceptron (MLP) with recurrent long...

(This article belongs to the Special Issue Recent Advances in Wastewater Treatment and Water Reuse)
  • Article
  • Open Access
5 Citations
2,872 Views
14 Pages

13 August 2021

Additive manufacturing has progressed rapidly, and the unique attributes of the layer-wise material consolidation are attracting ever increasing application potentials in critical sectors such as medical and aerospace industries. A lack of materials...

(This article belongs to the Special Issue Advanced Materials in 3D/4D Printing Technology)
  • Article
  • Open Access
1 Citations
1,454 Views
17 Pages

19 February 2026

Hydrogen energy is acknowledged as being the cleanest energy source. As hydrogen fuel cell technology advances, the development of low-cost, high-quality hydrogen purification technologies has grown increasingly critical. Targeting the separation of...

(This article belongs to the Section A5: Hydrogen Energy)
  • Article
  • Open Access
6 Citations
3,938 Views
13 Pages

9 May 2018

Special T-type fractures can be formed when coal is hydraulically fractured and there is currently no relevant theoretical model to calculate and describe them. This paper first establishes the height calculation model of vertical fractures in multi-...

(This article belongs to the Section L: Energy Sources)
  • Article
  • Open Access
107 Citations
7,314 Views
18 Pages

17 July 2018

This paper proposes a noninvasive dual optical photoplethysmography (PPG) sensor to classify the degree of arteriovenous fistula (AVF) stenosis in hemodialysis (HD) patients. Dual PPG measurement node (DPMN) becomes the primary tool in this work for...

  • Article
  • Open Access
14 Citations
3,618 Views
21 Pages

Effects of Powder Atomisation on Microstructural and Mechanical Behaviour of L-PBF Processed Steels

  • Marawan Abdelwahed,
  • Riccardo Casati,
  • Sven Bengtsson,
  • Anna Larsson and ,
  • Martina Riccio and
  • Maurizio Vedani
  • + 1 author+ 0 author

5 November 2020

In this research, steel alloys based on the Fe-Cr-Mo, Fe-Cr-Mn and Fe-Cr-Mo-Mn-Ni systems have been designed, produced by different atomisation techniques, and processed by laser powder bed fusion (L-PBF) to investigate their microstructural and mech...

(This article belongs to the Section Additive Manufacturing)
  • Article
  • Open Access
14 Citations
3,663 Views
16 Pages

Modified Grape Seeds: A Promising Alternative for Nitrate Removal from Water

  • Marija Stjepanović,
  • Natalija Velić and
  • Mirna Habuda-Stanić

24 August 2021

The aim of this work was to investigate grape seeds as a potential adsorbent for nitrate removal from water. Grape seeds were modified by quaternization and the applicability of the modified grape seeds (MGS) was evaluated in batch adsorption experim...

(This article belongs to the Topic Multiple Application for Novel and Advanced Materials)
  • Article
  • Open Access
7 Citations
3,067 Views
16 Pages

Video-Sensing Characterization for Hydrodynamic Features: Particle Tracking-Based Algorithm Supported by a Machine Learning Approach

  • Aimé Lay-Ekuakille,
  • John Djungha Okitadiowo,
  • Moïse Avoci Ugwiri,
  • Sabino Maggi and ,
  • Rita Masciale and
  • Giuseppe Passarella
  • + 1 author+ 0 author

18 June 2021

The efficient and reliable monitoring of the flow of water in open channels provides useful information for preventing water slow-downs due to the deposition of materials within the bed of the channel, which might lead to critical floods. A reliable...

(This article belongs to the Special Issue Sensors and Sensor Systems for Hydrodynamics)
  • Article
  • Open Access
4 Citations
2,055 Views
19 Pages

21 May 2025

Addressing the removal of hazardous phenolic pollutants from water, this study introduces an eco-friendly adsorbent composed of waste-derived hydrochar immobilized in alginate beads (Alg/HC). The physicochemical properties of the Alg/HC beads were ch...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
13 Citations
15,534 Views
18 Pages

3 September 2019

This paper is aimed at investigating the applicability of the notion of Sequent Occupance to the Singapore context. Sequent Occupance as a phenomenon in Human Geography was first theorized by Derwent Whittlesey in 1929 in order to describe the curren...

(This article belongs to the Special Issue Urban Place Names: Political, Economic, and Cultural Dimensions)

of 2