- Article
For the purpose of fixing timing violations, static timing analysis (STA) of full-corners is repeatedly executed, which is time-consuming. Given a timing path, timing results at some corners (“dominant corners”) are utilized to predict ti...
For the purpose of fixing timing violations, static timing analysis (STA) of full-corners is repeatedly executed, which is time-consuming. Given a timing path, timing results at some corners (“dominant corners”) are utilized to predict ti...
Path delay variation becomes a serious concern in advanced technology, especially for multi-corner conditions. Plenty of timing analysis methods have been proposed to solve the issue of path delay variation, but they mainly focus on every single corn...
The demand for computer vision applications has been growing in recent years. However, most tasks in real-world scenarios are in the state of small amounts of data, and the discriminability of features results in low performance in few-shot settings....
The first divider in the feedback path of a frequency synthesizer runs at the full oscillator frequency and so constrains the speed and the power of the loop. Current-mode logic reaches high speed but draws a constant bias current independent of swit...
Fractals represent important features of our natural environment, and therefore, several scientific fields have recently begun using fractals that employ fixed-point theory. While many researchers are working on fractals (i.e., Mandelbrot and Julia s...
From the wide range of methods available to landslide researchers and practitioners for monitoring ground displacements, remote sensing techniques have increased in popularity. Radar interferometry methods with their ability to record movements in th...
Exploiting the characteristics of corner, an information entropy-based corner detection algorithm using the multi-directional Gabor filters is proposed in this paper. Different from the methods which detect corners by analyzing plane curve contour sh...
Fractals play a vital role in modeling the natural environment. The present aim is to investigate the escape criterion to generate specific fractals such as Julia sets, Mandelbrot sets and Multi-corns via F-iteration using complex functions
Corner modifications can reduce wind loads acting on supertall buildings and modify the corresponding flow structures. The present study investigated the aerodynamic shape optimization of the corner recession square cylinders with multiple geometric...
Trihedral corner reflectors are being increasingly used as point targets in deformation monitoring studies using interferometric synthetic aperture radar (InSAR) techniques. The frequency and size dependence of the corner reflector Radar Cross Sectio...
Cracks at the corners of casting billets have a small morphology and rough surfaces. Corner cracks are generally irregular, with a depth of about 0.2–5 mm and a width of about 0.5–3 mm. It is difficult to detect the depth of cracks and th...
Soil moisture (SM) plays a pivotal role in regulating terrestrial energy-water exchanges and exerts substantial influence on agricultural productivity. In this study, a high-resolution soil moisture (HRSM) dataset (16 m) was generated by integrating...
Artificial corner reflectors are widely used in the vegetated landslide for time series InSAR monitoring due to their permanent scattering features. This paper investigated the RCS features of a novel dihedral CR under multi-resource SAR datasets. An...
Timing closure remains one of the most critical challenges of a physical synthesis flow, especially when the design operates under multiple operating conditions. Even if timing is almost closed at the end of the flow, last-mile placement and routing...
A variety of aerospace trajectory optimization problems are subject to either discontinuities or constraints at intermediate times, which define multiple arcs with distinctive governing equations. This work addresses multi-arc optimal control problem...
Based on the hypothesis that multi-corner and multi-cell structures can effectively improve energy absorption behavior, this paper designed a multi-cell circumferentially corrugated tube (MCCT) for energy absorption. The MCCT was designed as a variab...
Data registration is a prerequisite for the integration of multi-platform laser scanning in various applications. A new approach is proposed for the semi-automatic registration of airborne and terrestrial laser scanning data with buildings without ea...
The accurate extraction and mapping of built-up areas play an important role in many social, economic, and environmental studies. In this paper, we propose a novel approach for built-up area detection from high spatial resolution remote sensing image...
The delay-and-sum total focusing method (TFM) for ultrasonic full matrix capture (FMC) depends on accurate ray path and travel time computation. In L-shaped carbon fiber-reinforced polymer (CFRP) corner parts, elastic anisotropy, multilayer stacking,...
Due to the variations of aircraft types, sizes, orientations, and complexity of remote sensing images, it is still difficult to effectively obtain accurate position and type by aircraft detection, which plays an important role in intelligent air tran...
Correlation coefficient is one of the broadly use indexes in multi-criteria decision-making (MCDM) processes. However, some important issues related to correlation coefficient utilization within probabilistic hesitant fuzzy environments remain to be...
The Gaussian kernel, its partial derivatives and the Laplacian kernel, applied at different image scales, play a very important role in image processing and in feature extraction from images. Although they have been extensively studied in the case of...
This research investigates the effects of cornering on a multi-element wing in ground effect with the aim to improve the understanding of such in the effort to improve the performance of open-wheel race cars. A numerical validation study was performe...
To address the challenges of high model complexity, substantial computational resource consumption, and insufficient classification accuracy in existing soybean seed identification research, we first perform soybean seed segmentation based on polygon...
As one of the most important greenhouse gases, carbon dioxide (CO2) exhibits spatiotemporal variations that directly affect the accuracy of global carbon inventories. In recent years, multiple satellites have successively been deployed for observing...
An alloy wheel is generally a symmetrically shaped part integral to a vehicle because its weight and strength can improve driving performance. Therefore, alloy wheel design is essential, and a novel design method should be considered. Currently, the...
After publication of the research paper [1], the author wishes to make the following correction to the paper.[...]
A new voltage-controlled oscillator (VCO) topology for serializer–deserializer (SerDes) applications is proposed in this paper. The topology is suitable for SATA, PCI Express, and USB 3 protocols. The VCO is based on two-ring oscillator cores a...
Ellenberg indicator values (EIVs) express plant preferences for temperature, light, continentality, soil moisture, pH, and soil nutrients, and have been largely used to deduce environmental characteristics from plant communities. However, EIVs might...
Polarization calibration without artificial calibrators has been one of the focuses of research and discussion for PolSAR communities. However, there is limited research on the treatment of dual-polarization systems and the calibration methods for ge...
Over the past few decades, the global population and the built environment’s vulnerability to natural hazards have risen dramatically. As a result, decisive actions, such as the SENDAI framework, have emerged to foster a global culture of successful...
Therapeutic antibodies (Abs) which act on a broader range of epitopes may provide more durable protection against the genetic drift of a target, typical of viruses or tumors. When these Abs exist concurrently on the targeted antigen, several mechanis...
The stitching of bone stick fragments is of great significance for the inheritance of and research into the outstanding traditional culture of the Western Han Dynasty. Focused on the problem that the existing methods have a low bone stick fragment st...
To improve the performance of Radio Frequency Identification (RFID) multi-label systems, the multi-label network structure needs to be quickly located and optimized. A multi-label location measurement method based on the NLM–Harris algorithm is...
The underwater corner reflector is a “concave” elastic structure, and its acoustic echo exhibits large elastic loss, which affects its practical use. To study the acoustic echo elastic loss characteristics of underwater corner reflectors,...
The shingled magnetic recording (SMR) with exchange coupled composite (ECC) media is a feasible method to achieve the areal density of multi-Tera-bit/in2. However, a rounded corner is inevitable due to deviations from the fabrication process of a shi...
Nowadays, with the increase of the thrust-to-weight ratio of the aero engines, the high aerodynamic load has made corner separation an issue for axial compressors. The complex three-dimensional flow field makes it challenging to suppress the corner s...
The revitalization of historic districts is crucial for the sustainable development of cities, with street corner spaces being a vital component of the public space in these districts. However, street corner spaces have been largely overlooked in pre...
The corner element is the most basic constitutive element of multi-cellular thin-walled structures; however, scenarios for using relevant theories are limited. To improve this situation, this research investigated the effect of boundary conditions on...
In order to study the influence of chamfered and rounded corners on vortex-induced vibration of super-tall buildings, a series of multi-degree-of-freedom (MDOF, in short) aeroelastic models were made, including chamfered-corner models with chamfer ra...
Object detection in Synthetic Aperture Radar (SAR) images remains a challenging task due to factors such as complex backgrounds, frequent fluctuations in object scale and quantity, and the inherent discrete scattering characteristics of SAR imaging....
Algorithms such as RRT (Rapidly exploring random tree), A* and their variants have been widely used in the field of robot path planning. A lot of work has shown that these detectors are unable to carry out effective and stable results for moving obje...
A full-vehicle analysis model was constructed incorporating a SLA (Short Long Arm) strut front suspension system and a multi-link rear suspension system. CAE (Computer Aided Engineering) simulations were then performed to investigate the lateral acce...
This study conducts quantitative analysis of the degree of mortar carbonation under the influence of a multi-dimensional interaction. The HABT method is used to determine the degree of mortar carbonation and is compared with the TGA method. The resul...
Feature extraction is a central step of processing Light Detection and Ranging (LIDAR) data. Existing detectors tend to exploit characteristics of specific environments: corners and lines from indoor (rectilinear) environments, and trees from outdoor...
It is very important to perform magnetostatic analysis accurately and efficiently when it comes to multi-objective optimization of designs of electromagnetic devices, particularly for inductors, transformers, and electric motors. A kernel free bounda...
The safe and reliable operation of autonomous vehicles is contingent on comprehensive testing. However, the operational scenarios are inexhaustible. Corner cases, which critically influence autonomous vehicle safety, occur at an extremely low probabi...
Cavities are typical features in aeronautical structural parts and molds. For high-speed milling of multi-cavity parts, a reasonable processing sequence planning can significantly affect the machining accuracy and efficiency. This paper proposes an i...
High-entropy alloys (HEAs) [1,2] loosely refer to multi-principal-element solid solution alloys due to their high configurational entropy, in contrast to traditional alloys, which focus on the edge or corner of phase diagrams with one principal compo...
In target detection of optical remote sensing images, two main obstacles for aircraft target detection are how to extract the candidates in complex gray-scale-multi background and how to confirm the targets in case the target shapes are deformed, irr...
of 7