Skip to Content

58 Results Found

  • Article
  • Open Access
62 Citations
5,202 Views
13 Pages

Effect of Interlayer Delay on the Microstructure and Mechanical Properties of Wire Arc Additive Manufactured Wall Structures

  • Shalini Singh,
  • Arackal Narayanan Jinoop,
  • Gorlea Thrinadh Ananthvenkata Tarun Kumar,
  • Iyamperumal Anand Palani and ,
  • Christ Prakash Paul and
  • Konda Gokuldoss Prashanth
  • + 1 author+ 0 author

27 July 2021

Wire arc additive manufacturing is a metal additive manufacturing technique that allows the fabrication of large size components at a high deposition rate. During wire arc additive manufacturing, multi-layer deposition results in heat accumulation, w...

(This article belongs to the Collection Additive Manufacturing: Alloy Design and Process Innovations)
  • Article
  • Open Access
324 Views
15 Pages

30 September 2026

Interfacial engineering can modify the electrical response of hafnium zirconium oxide capacitors, but separating polarization dynamics from circuit charging remains essential. We compare approximately 10 nm thick Hf0.5Zr0.5O2 (HZO) capacitors with ot...

(This article belongs to the Special Issue Neuromorphic Memory and Computing-in-Memory Architectures: From Devices to Systems)
  • Article
  • Open Access
31 Citations
4,202 Views
24 Pages

The Effect of Interlayer Delay on the Heat Accumulation, Microstructures, and Properties in Laser Hot Wire Directed Energy Deposition of Ti-6Al-4V Single-Wall

  • Rajib Halder,
  • Petrus C. Pistorius,
  • Scott Blazanin,
  • Rigved P. Sardey and ,
  • Maria J. Quintana,
  • Edward A. Pierson,
  • Amit K. Verma,
  • Peter C. Collins and
  • Anthony D. Rollett
  • + 4 authors+ 0 author

4 July 2024

Laser hot wire directed energy deposition (LHW-DED) is a layer-by-layer additive manufacturing technique that permits the fabrication of large-scale Ti-6Al-4V (Ti64) components with a high deposition rate and has gained traction in the aerospace sect...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
2 Citations
1,075 Views
16 Pages

Layer Bond Strength in 3D-Printed Concrete: The Role of Interlayer Surface Area and Printing Delay Time

  • Nikol Žižková,
  • Josef Válek,
  • Arnošt Vespalec,
  • Jindřich Melichar and ,
  • Sławomir Czarnecki and
  • Adrian Chajec
  • + 1 author+ 0 author

17 March 2026

Three-dimensional (3D) printing, also known as additive manufacturing of cementitious materials, appears to be a promising way to build in a way that is more time-efficient, cost-effective and, under certain conditions, environmentally friendly. This...

(This article belongs to the Special Issue Concretes and Cement-Based Composites: Additives/Admixtures, Hydration Process and Durability Research (3rd Edition))
  • Article
  • Open Access
3 Citations
2,188 Views
22 Pages

To address the common limitations of conventional dual-layer path planning methods, such as slow global convergence, delayed local obstacle avoidance response, and insufficient inter-layer integration, this paper proposes an enhanced collaborative pl...

(This article belongs to the Section Computer Science & Engineering)
  • Article
  • Open Access
5 Citations
2,264 Views
16 Pages

The Influence of Interlayer on the Development of Steam Chamber in Steam Stimulation during Heavy Oil Recovery

  • Hongjun Fan,
  • Tingen Fan,
  • Junhui Deng,
  • Lijun Zhang and ,
  • Wei Zheng,
  • Lifeng Chen,
  • Zunzeng Ge,
  • Haojun Xie and
  • Xu Liang
  • + 4 authors+ 0 author

7 June 2023

Cyclic steam stimulation is an effective thermal recovery method for heavy oil recovery. The key potential mechanism is the growth of the steam chamber after steam injection. Taking the LD5X heavy oil reservoir as an example, besides the interlayer d...

(This article belongs to the Special Issue Towards Green Development: Heat Transfer and Advanced Technologies in Unconventional Oil and Gas Exploitation)
  • Article
  • Open Access
694 Views
21 Pages

Strengthening the Substrates of Wood Single Lap Joints Using a Novel Hot-Melt Film Adhesive to Mitigate Delamination

  • Francisco C. C. Ribeiro,
  • Shahin Jalali,
  • Vasco C. M. B. Rodrigues,
  • Ricardo J. C. Carbas and ,
  • Eduardo A. S. Marques,
  • Fengzhen Sun and
  • Lucas F. M. da Silva
  • + 2 authors+ 0 author

13 April 2026

Delamination remains a critical limitation in the structural application of wood, particularly in adhesively bonded joints. This study investigates the use of a cyclic olefin-based hot-melt film adhesive (Zeon® LS-XU) as a thermoplastic interlaye...

(This article belongs to the Special Issue Mechanical Behavior of Advanced Composite Materials and Structures (2nd Edition))
  • Article
  • Open Access
2 Citations
965 Views
15 Pages

Corrosion Behaviour and Residual Stress State of Laser-Welded Ti6Al4V/AA7075 Joints with a Ag Interlayer

  • Asim Iltaf,
  • Narges Ghafouri,
  • Noureddine Barka,
  • Shayan Dehghan and
  • Rafiq Ahmad

In this study, the corrosion performance and near-surface residual stress state of laser-welded Ti6Al4V/AA7075 dissimilar joints produced with a silver (Ag) interlayer are investigated. Potentiodynamic polarization, cyclic polarization, and electroch...

  • Article
  • Open Access
1 Citations
503 Views
25 Pages

This study presents a coupled numerical–experimental investigation into the early-age thermo-mechanical behaviour of 3D-printed concrete (3DPC), with particular emphasis on strength development, interlayer bonding, and thermally induced crackin...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
5 Citations
1,112 Views
29 Pages

A Prediction Model of Interlayer Bond Strength for 3D-Printed Concrete Considering Printing Interval and Environmental Effects

  • Wenbin Xu,
  • Zihao Xu,
  • Tao Liu,
  • Jun Ouyang and ,
  • Juan Wang,
  • Hailong Wang and
  • Wenqiang Xu
  • + 2 authors+ 0 author

30 March 2026

Interlayer bond strength is critical for ensuring the safety and durability of 3D-printed concrete (3DPC) structures. However, there remains a lack of real-time prediction methods addressing interlayer performance under the combined effects of interv...

(This article belongs to the Special Issue Additive Manufacturing of Structural Materials and Their Composites)
  • Article
  • Open Access
1 Citations
1,085 Views
21 Pages

Analysis of Dynamic Response Characteristics and Failure Pattern of Rock Slopes Containing X-Joints and Underlying Weak Interlayers

  • He Meng,
  • Yanjun Shang,
  • Liyun Zhou,
  • Yangfan Li and ,
  • Xuetao Yi and
  • Qingsen Meng
  • + 1 author+ 0 author

19 September 2025

Under the complex geological structural stress of the Western Himalayan syntaxis, the widespread distribution of hard and brittle rocks (such as sandstone and limestone) makes them prone to the formation of conjugate joints, also known as X-joints. T...

  • Article
  • Open Access
144 Citations
12,478 Views
19 Pages

14 January 2020

Recently, the progress in 3D concrete printing has developed enormously. However, for the techniques available, there is still a severe lack of knowledge of the functional interaction of processing technology, concrete rheology and admixture usage. F...

(This article belongs to the Special Issue Concrete 3D Printing and Digitally-Aided Fabrication)
  • Article
  • Open Access
6 Citations
2,569 Views
19 Pages

Influence of Interface on Mechanical Behavior of Al-B4C/Al Laminated Composites under Quasi-Static and Impact Loading

  • Runwei Zhang,
  • Zhenlong Chao,
  • Longtao Jiang,
  • Huimin Han and ,
  • Bingzhuo Han,
  • Shanqi Du,
  • Tian Luo,
  • Guoqin Chen,
  • Yong Mei and
  • Gaohui Wu
  • + 5 authors+ 0 author

25 October 2023

In this study, Al-B4C/Al laminated composites with high interlayer bonding strength were fabricated by integrated hot-pressed sintering accompanied with hot rolling. The mechanical properties and interface behavior of the Al-B4C/Al laminated composit...

(This article belongs to the Section Metals and Alloys)
  • Article
  • Open Access
272 Views
21 Pages

An Experimental Study on the Effects of Electrospun Nanofiber Interleaves on Impact Damage Response and Compression-After-Impact of CFRP Laminates

  • Christian Brauner,
  • Matthias Schär,
  • Ata Yoosefinejad,
  • Naresh Sanandiya and ,
  • Hamed Heravi,
  • Peyman Adl,
  • Frederick Tischhauser,
  • Edgars Eglitis and
  • Mohammad Hajikazemi
  • + 4 authors+ 0 author

26 October 2026

Electrospun thermoplastic nanofiber interleaving has recently been shown to significantly enhance the Mode I and Mode II interlaminar fracture toughness of carbon fiber-reinforced polymer (CFRP) laminates. This exploratory experimental study extends...

(This article belongs to the Special Issue Advances in Fiber-Reinforced Composite Structures: From Design to Applications)
  • Article
  • Open Access
1 Citations
776 Views
16 Pages

Geological and Engineering Effects on Bottom Water Flow in Volcanic Reservoirs

  • Xiaoshan Li,
  • Liu Yang,
  • Xiang Dai,
  • Junqiang Song and ,
  • Kaifang Gu,
  • Lifeng Zhang,
  • Li Wang and
  • Yikang Sun
  • + 3 authors+ 0 author

18 October 2025

Volcanic rocks are rich in high-quality oil and gas and represent a key future exploration target. However, bottom water coning in complex reservoirs severely reduces extraction efficiency. This study uses numerical simulation to analyze how permeabi...

(This article belongs to the Section Energy Systems)
  • Article
  • Open Access
3 Citations
1,440 Views
24 Pages

22 August 2025

To reduce reflective cracking in asphalt pavements, gravel base layers are commonly employed to disperse stress and delay structural damage. However, the loose nature of gravel bases results in complex interlayer contact conditions, typically involvi...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
964 Views
15 Pages

Interlayer Mechanical Behavior in CRTS II Slab Ballastless Tracks Under Vertical Loading

  • Xiao Guo,
  • Xiaonan Xie,
  • Xuebing Zhang,
  • Li Wang and
  • Ping Xiang

11 December 2025

Reliable in situ quantification of interlayer mechanics in CRTS-II ballastless track slabs remains limited by the poor instrumentability of the CA mortar layer. This study implements a quasi-distributed fiber-optic sensing scheme by encapsulating FBG...

(This article belongs to the Special Issue State-of-the-Art Structural Health Monitoring Application)
  • Article
  • Open Access
560 Views
23 Pages

Water Influx Behavior and CO2 Injection for Water Control and Production Enhancement in Vertically Heterogeneous Gas Reservoirs

  • Zhiliang Shi,
  • Yudan Li,
  • Hua Liu,
  • Qikui Yu and ,
  • Qizhi Wang,
  • Feifei Fang,
  • Sijie He,
  • Mingyi Gao and
  • Yiqiang Li
  • + 4 authors+ 0 author

15 July 2026

In heterogeneous edge-water carbonate gas reservoirs during the middle-to-late development stage, edge-water invasion and pressure depletion significantly compromise production stability and gas recovery. To investigate water invasion behavior under...

(This article belongs to the Special Issue Multiscale Process Engineering for Unconventional Resources)
  • Article
  • Open Access
10 Citations
2,378 Views
24 Pages

25 April 2024

Reflection cracks are one of the most common problems in semi-rigid base pavement. Setting a stress absorption layer can effectively delay the occurrence of reflection cracks, but further improvement is still needed in its interlayer bonding performa...

(This article belongs to the Special Issue Mechanical Property Research of Advanced Asphalt-Based Materials)
  • Article
  • Open Access
692 Views
16 Pages

Progressive Failure Characteristics of Strain-Softening Subgrade Slopes Based on the Local Slip Point Safety Factor

  • Jinhong Xie,
  • Tao Yang,
  • Gang He,
  • Haizhou Feng and ,
  • Tao Peng and
  • Hao Zheng
  • + 1 author+ 0 author

30 August 2026

In Southwest China’s mountainous areas, subgrade slopes are prone to strain softening and progressive failure under rainfall conditions. To clarify the failure mechanism and evaluate slope stability, this study adopts the displacement-isosurfac...

(This article belongs to the Section Geotechnical, Geological and Environmental Engineering)
  • Article
  • Open Access
2 Citations
2,139 Views
18 Pages

Optimisation of Interlayer Bond Strength in 3D-Printed Concrete Using Response Surface Methodology and Artificial Neural Networks

  • Lenganji Simwanda,
  • Abayomi B. David,
  • Gatheeshgar Perampalam,
  • Oladimeji B. Olalusi and
  • Miroslav Sykora

21 October 2025

Enhancing interlayer bond strength remains a critical challenge in the extrusion-based 3D printing of cementitious materials. This study investigates the optimisation of interlayer bond strength in extrusion-based 3D-printed cementitious materials th...

(This article belongs to the Special Issue Emerging Trends in Machine Learning for Structural Engineering: Innovations and Applications)
  • Article
  • Open Access
22 Citations
3,808 Views
19 Pages

Influence of Geocomposite Properties on the Crack Propagation and Interlayer Bonding of Asphalt Pavements

  • Sara Spadoni,
  • Lorenzo Paolo Ingrassia,
  • Giulio Paoloni,
  • Amedeo Virgili and
  • Francesco Canestrari

15 September 2021

The application of geocomposites as reinforcement in asphalt pavements is a promising solution for the maintenance/rehabilitation of existing pavements and for the construction of new pavements, whose effectiveness strongly depends on the physical an...

  • Article
  • Open Access
13 Citations
4,964 Views
16 Pages

16 October 2024

Geophysical monitoring of CO2 geological sequestration represents a critical technology for ensuring the long-term safe storage of CO2 while verifying its characteristics and dynamic changes. Currently, the primary geophysical monitoring methods empl...

(This article belongs to the Special Issue Exploration, Exploitation and Utilization of Coal and Gas Resources, 2nd Edition)
  • Article
  • Open Access
370 Views
33 Pages

12 August 2026

Low Earth Orbit (LEO) communication networks are an important component of non-terrestrial networks (NTNs) in sixth-generation (6G) communication systems. LEO satellites are characterized by low propagation delay and highly time-varying topology. Spa...

(This article belongs to the Section Networks)
  • Review
  • Open Access
15 Citations
3,807 Views
42 Pages

10 May 2025

This review investigates interlayer hybrid fiber composites for wind turbine blades (WTBs), focusing on their potential to enhance blade damage tolerance and maintain structural integrity. The objectives of this review are: (I) to assess the effect o...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
8 Citations
2,678 Views
13 Pages

29 September 2021

In the study, experiments were performed on two eco-efficient self-compacting concrete mixes of reduced binder content containing supplementary cementitious materials. The behaviour of the eco-efficient self-compacting concrete (SCC) mixture was exam...

(This article belongs to the Special Issue Structural Concrete Material: New Trends for Eco-Efficiency and Performance)
  • Article
  • Open Access
9 Citations
2,286 Views
12 Pages

6 December 2023

Confined water inrush caused by fault activation is the main form of water disaster in deep mining. With theoretical analysis and similar simulation tests, the mechanism and evolution law of delayed water inrush caused by fault activation are reveale...

(This article belongs to the Special Issue The Research on Effects of Coal Mining on Groundwater Environment and System)
  • Feature Paper
  • Article
  • Open Access
2 Citations
3,555 Views
12 Pages

20 December 2021

We have simulated a monolithic three-dimensional inverter (M3DINV) structure by considering the interfacial trap charges generated thermally during the monolithic three-dimensional integration process. We extracted the SPICE model parameters from M3D...

(This article belongs to the Special Issue Device Modeling for TCAD and Circuit Simulation)
  • Article
  • Open Access
1 Citations
1,544 Views
17 Pages

Air Traffic Complexity Analysis in Multi-Airport Terminal Areas Based on Route Segment–Flight State Interdependent Network

  • Chuanlong Zhang,
  • Xiangxi Wen,
  • Minggong Wu,
  • Libiao Zhang and ,
  • Hanchen Xie,
  • Lingzhong Meng and
  • Jiale Yang
  • + 2 authors+ 0 author

17 September 2025

An analysis of air traffic complexity in multi-airport terminal areas can assist air traffic controllers in accurately assessing the air traffic situation and collaboratively managing air traffic flows, thereby enhancing the utilization of airspace r...

(This article belongs to the Section Air Traffic and Transportation)
  • Article
  • Open Access
426 Views
31 Pages

Interlayer Shear Response of Asphalt Bridge Deck Pavements Under Thermo-Mechanical Coupling and Moving Braking Loads

  • Xuan Zhu,
  • Zhi Li,
  • Xiangyu Lei,
  • Hailin Wang and ,
  • Weiwei Lu,
  • Dingling Yang,
  • Hongyu Ren,
  • Yuxi He,
  • Weiguo Wu and
  • Peng Chen
  • + 5 authors+ 0 author

Asphalt bridge deck pavements are highly susceptible to rutting, shoving, and interlayer slippage under high-temperature traffic conditions, where interlayer shear stress plays a decisive role. To clarify the coupled effects of thermal gradients and...

  • Article
  • Open Access
22 Citations
4,267 Views
9 Pages

Low—Permittivity Copolymerized Polyimides with Fluorene Rigid Conjugated Structure

  • Xiaodi Dong,
  • Mingsheng Zheng,
  • Baoquan Wan,
  • Xuejie Liu and ,
  • Haiping Xu and
  • Junwei Zha
  • + 1 author+ 0 author

21 October 2021

As the miniaturization of electronic appliances and microprocessors progresses, low-permittivity interlayer materials are becoming increasingly important for their suppression of electronic crosstalk, signal propagation delay and loss, and so forth....

(This article belongs to the Special Issue Novel Dielectric Materials: Innovations and Applications)
  • Article
  • Open Access
1 Citations
2,370 Views
19 Pages

Efficient Pipeline Conflict Resolution for Layered QC-LDPC Decoders in OFDM-PON

  • Zhijie Wang,
  • Zhengjun Xu,
  • Kun Chen,
  • Yuanzhe Qu and ,
  • Xiaoqun Liu,
  • Yingchun Li and
  • Junjie Zhang
  • + 2 authors+ 0 author

The high standard of communication quality in optical access networks makes forward error correction (FEC) schemes, such as LDPC, an integral part of the system. However, pipeline conflict arising from data dependencies is a common issue encountered...

(This article belongs to the Section Optical Communication and Network)
  • Article
  • Open Access
1 Citations
1,922 Views
18 Pages

24 August 2025

Direct fusion welding of aluminum (Al) to magnesium (Mg) results in the formation of brittle intermetallic compounds (IMCs) that significantly restrict the application of these joints in structural applications. In this study, cold spray, a promising...

(This article belongs to the Special Issue Novel Insights into Welding and Joining Technologies of Metallic Materials)
  • Article
  • Open Access
437 Views
18 Pages

Enhanced Interfacial Adhesion and Dynamic Seawater Durability of Basalt Fiber/Epoxy Composites via PDA-Assisted In Situ Growth of UiO-66-NH2

  • Yingquan Zhou,
  • Guoqian Xie,
  • Bin Wang,
  • Chunxia Zhao and ,
  • Hui Li and
  • Dong Xiang
  • + 1 author+ 0 author

5 October 2026

Durable basalt fiber-reinforced polymer (BFRP) composites are needed for marine and offshore structures, where seawater exposure and hydrodynamic shear progressively degrade the fiber–matrix interface. To address this challenge, a hierarchical...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
658 Views
22 Pages

The Myelin Sheath as a Multilamellar Electromechanical System: Bilayer Stack Analogs, Energy Buffering, and Biological Memory

  • Dima Bolmatov,
  • Zack Woodel,
  • Igor M. Gussev,
  • Miguel Turrero García and ,
  • Erik B. Watkins,
  • Yong Q. Cai and
  • Ilia N. Ivanov
  • + 2 authors+ 0 author

28 August 2026

The myelin sheath has traditionally been viewed as a passive electrical insulator that accelerates nerve impulse propagation. Recent experimental studies, however, indicate that myelin is a dynamic biological material whose structure and hydration st...

(This article belongs to the Special Issue Membranes and Memory: From Fundamentals and Mechanisms to Neuromorphic Devices)
  • Article
  • Open Access
1 Citations
695 Views
16 Pages

This paper presents a comprehensive numerical modeling of nonlinear groundwater flow in a synthetic heterogeneous four-layer porous medium. Multilayered aquifer systems present significant modeling challenges due to nonlinear filtration and interlaye...

(This article belongs to the Topic Advances in Groundwater Science and Engineering)
  • Article
  • Open Access
10 Citations
3,348 Views
14 Pages

Cellulose Acetate and Polycaprolactone Fibre Coatings on Medical-Grade Metal Substrates for Controlled Drug Release

  • Catarina Cidade do Carmo,
  • Miguel Brito,
  • J. P. Oliveira,
  • Ana Marques and ,
  • Isabel Ferreira and
  • Ana Catarina Baptista
  • + 1 author+ 0 author

13 July 2024

This study explores a method that has the potential to be cost effective in inhibiting biofilm formation on metallic prostheses, thereby preventing rejection or the requirement for replacement. A cost-effective metal alloy used in biomedical implants...

(This article belongs to the Special Issue Polymers and Their Role in Drug Delivery)
  • Article
  • Open Access
1,479 Views
14 Pages

Memory-Efficient Feature Merging for Residual Connections with Layer-Centric Tile Fusion

  • Hao Zhang,
  • Jianheng He,
  • Yupeng Gui,
  • Shichen Peng and ,
  • Leilei Huang,
  • Xiao Yan and
  • Yibo Fan
  • + 2 authors+ 0 author

18 August 2025

Convolutional neural networks (CNNs) have achieved remarkable success in computer vision tasks, driving the rapid development of hardware accelerators. However, memory efficiency remains a key challenge, as conventional accelerators adopt layer-by-la...

(This article belongs to the Special Issue Research on Key Technologies for Hardware Acceleration)
  • Article
  • Open Access
4 Citations
3,358 Views
21 Pages

The high altitude platform station (HAPS) system is an essential component of the air-based network. It can shorten transmission delay and make a better user experience compared with satellite networks, and it can also be easily deployed and cover a...

(This article belongs to the Section Systems & Control Engineering)
  • Article
  • Open Access
1 Citations
965 Views
16 Pages

5 April 2026

Addressing challenges such as the non-Newtonian fluid characteristics of melt, significant system hysteresis, and rheological thermal drift in large-scale glass fiber-reinforced polypropylene (PP-GF) screw-extrusion additive manufacturing (SEAM), thi...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
3 Citations
1,590 Views
16 Pages

9 August 2025

This study presents the development and performance evaluation of a rock asphalt-modified damping asphalt binder tailored for interlayer applications in photovoltaic pavement systems. A series of composite binders was formulated by incorporating Qing...

(This article belongs to the Special Issue Advances in Performance-Based Asphalt and Asphalt Mixtures)
  • Article
  • Open Access
4 Citations
3,143 Views
30 Pages

Development of Robust Steel Alloys for Laser-Directed Energy Deposition via Analysis of Mechanical Property Sensitivities

  • Jonathan Kelley,
  • Joseph W. Newkirk,
  • Laura N. Bartlett,
  • Sriram Praneeth Isanaka and ,
  • Todd Sparks,
  • Saeid Alipour and
  • Frank Liou
  • + 2 authors+ 0 author

24 September 2024

To ensure consistent performance of additively manufactured metal parts, it is advantageous to identify alloys that are robust to process variations. This paper investigates the effect of steel alloy composition on mechanical property robustness in l...

(This article belongs to the Special Issue Future Prospects of Additive Manufacturing)
  • Article
  • Open Access
11 Citations
4,213 Views
11 Pages

13 September 2020

The optimal structure and process for the feedback field-effect transistor (FBFET) to operate as a logic device are investigated by using a technology computer-aided design mixed-mode simulator. To minimize the memory window of the FBFET, the channel...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
4 Citations
2,211 Views
16 Pages

Visibility Graph Investigation of the Shallow Seismicity of Lai Chau Area (Vietnam)

  • Luciano Telesca,
  • Anh Tuan Thai,
  • Dinh Trong Cao and
  • Thanh Hai Dang

31 October 2024

In this study, the topological properties of the shallow seismicity occurring in the area around the Lai Chau hydropower plant (Vietnam) are investigated by using visibility graph (VG) analysis, a well-known method to convert time series into network...

(This article belongs to the Special Issue Time Series Analysis in Earthquake Complex Networks)
  • Article
  • Open Access
6 Citations
3,203 Views
15 Pages

9 January 2023

This study presents the improved stabilization effects of graphene on a polymer substrate, namely a styrene-isoprene-styrene triblock copolymer (SIS) which creates opportunities for long-term applications and radiation processing. The added graphene...

(This article belongs to the Collection Assessment of the Ageing and Durability of Polymers)
  • Article
  • Open Access
70 Citations
6,255 Views
17 Pages

5 February 2019

The present research reports on the development of bi- and multilayer polylactide (PLA) films by the incorporation of electrospun nanostructured PLA coatings and interlayers containing the antioxidant gallic acid (GA) at 40 wt% onto cast-extruded PLA...

(This article belongs to the Section Nanotechnology and Applied Nanosciences)
  • Article
  • Open Access
5 Citations
5,601 Views
14 Pages

The Effect of BEOL Design Factors on the Thermal Reliability of Flip-Chip Chip-Scale Packaging

  • Dejian Li,
  • Bofu Li,
  • Shunfeng Han,
  • Dameng Li and ,
  • Baobin Yang,
  • Baoliang Gong,
  • Zhangzhang Zhang,
  • Chang Yu and
  • Pei Chen
  • + 4 authors+ 0 author

22 January 2025

With the development of high-density integrated chips, low-k dielectric materials are used in the back end of line (BEOL) to reduce signal delay. However, due to the application of fine-pitch packages with high-hardness copper pillars, BEOL is suscep...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
579 Views
22 Pages

Graphene oxide (GO) has been widely reported to enhance the mechanical performance of cementitious composites. However, the fundamental hydration mechanisms underlying these improvements, such as GO’s role as a nucleation site, remain poorly ex...

  • Article
  • Open Access
523 Views
22 Pages

Metastability and Entropy Peaks in Antagonistic Multiplex Consensus Dynamics

  • Jack C. M. Hughes,
  • Anna Kusmartseva,
  • Glenn Muschert,
  • Herbert F. Jelinek and
  • Fedor V. Kusmartsev

1 August 2026

Modern societies comprise overlapping communities whose opinions evolve on strongly interacting networks that are often mutually antagonistic. We introduce a minimal antagonistic multiplex consensus model in which each layer follows intra-layer major...

(This article belongs to the Special Issue Entropy-Based Applications in Sociophysics, Third Edition)
  • Article
  • Open Access
4 Citations
9,990 Views
28 Pages

Aim: Biofields combine many physiological levels, both spatially and temporally. These biofields reflect naturally resonant forms of synaptic energy reflected in growing and spreading waves of brain activity. This study aims to theoretically understa...

(This article belongs to the Special Issue The Resonant Brain: A Themed Issue Dedicated to Professor Stephen Grossberg)

of 2