Skip to Content

55 Results Found

  • Article
  • Open Access
265 Views
19 Pages

Effects of Filler Wire Composition and Post-Weld Heat Treatment on the Mechanical Properties of 4Cr13 Steel Welded Joints

  • Zhiyang Dou,
  • Yatong Lyu,
  • Hangwei Li,
  • Ziheng Wang and ,
  • Leyi Pan,
  • Chao Yang,
  • Junwan Li,
  • Pengpeng Zuo and
  • Senlin Jin
  • + 4 authors+ 0 author

17 September 2026

4Cr13 martensitic stainless steel is widely used for plastic molds, but welding repair can produce heterogeneous weld/HAZ microstructures and a strength–toughness trade-off. This study evaluates how filler-wire composition and post-weld heat tr...

(This article belongs to the Special Issue Microstructure and Mechanical Property Improvement of Welded Metal Joints (2nd Edition))
  • Article
  • Open Access
425 Views
20 Pages

Effect of Cobalt-Based Filler Wire Composition on the Microstructure and High-Temperature Properties of Cladding Layers on Ni-Based Superalloy

  • Shuai Huang,
  • Tianyuan Wang,
  • Wei Liu,
  • Yu Wu and ,
  • Jian Miao,
  • Guohui Zhang,
  • Bingqing Chen and
  • Biao Zhou
  • + 3 authors+ 0 author

17 July 2026

To improve the high-temperature service performance of cladding layers on DD5 single crystal superalloy, this study comparatively investigated the effects of two cobalt-based filler wires, PMet931 and PMet994, on the microstructural evolution, hardne...

(This article belongs to the Special Issue Additive Manufacturing and Forming Technologies of Alloy: Mechanical Properties and Microstructure Evaluation (Second Edition))
  • Article
  • Open Access
9 Citations
2,500 Views
14 Pages

28 October 2024

Laser welding was performed using different filler wires, ER70S steel, commercially pure iron, and pure nickel filler, in the context of welding X80 pipeline steel to assess the microstructure and mechanical properties of the weld metal. Introducing...

(This article belongs to the Section Manufacturing Processes and Systems)
  • Article
  • Open Access
4 Citations
2,858 Views
13 Pages

13 March 2025

Laser welding–brazing experiments with 6061 aluminum alloy and Q235 steel were conducted using AlSi12 and ZnAl22 as filler metals. The macroscopic morphologies and microstructures of welding–brazing joints were analyzed by optical microsc...

(This article belongs to the Section Crystalline Metals and Alloys)
  • Article
  • Open Access
2 Citations
1,348 Views
12 Pages

17 June 2025

Laser–MIG hybrid welding–brazing was performed to join TC4 titanium alloy and 5083 aluminum alloy with ER5356, ER4043 and ER2319 filler wires. The effects of the different filler wires on the microstructural features and mechanical proper...

(This article belongs to the Special Issue Laser Processing Technology for Metals)
  • Article
  • Open Access
63 Citations
7,781 Views
13 Pages

14 May 2019

The use of commercially available filler metals for wire and arc additive manufacturing (WAAM) of duplex stainless steel components results in a microstructure with a very low ferrite content. The ferrite–austenite ratio in the duplex stainless...

(This article belongs to the Special Issue Arc-based Additive Manufacturing)
  • Article
  • Open Access
7 Citations
2,796 Views
18 Pages

24 July 2024

Flexible electronics have revolutionized the field by overcoming the rigid limitations of traditional devices, offering superior flexibility and adaptability. Conductive ink performance is crucial, directly impacting the stability of flexible electro...

(This article belongs to the Section Wearables)
  • Article
  • Open Access
17 Citations
6,856 Views
11 Pages

Mechanical Properties of Aluminum 5083 Alloy GMA Welds with Different Magnesium and Manganese Content of Filler Wires

  • Gwang-Gook Kim,
  • Dong-Yoon Kim,
  • Insung Hwang,
  • Dongcheol Kim and ,
  • Young-Min Kim and
  • Junhong Park
  • + 1 author+ 0 author

8 December 2021

Gas metal arc welding of aluminum 5083 alloys was performed using three new welding wires with different magnesium and manganese contents and compared with commercial aluminum 5183 alloy filler wire. To investigate the effect of magnesium and mangane...

(This article belongs to the Special Issue Microstructural and Mechanical Properties of Metallic Materials, Volume II)
  • Article
  • Open Access
11 Citations
6,440 Views
20 Pages

24 April 2019

In thick section laser welding, filler metal addition is usually required to improve joint fit-up tolerances or to control the chemical composition of the weld metal. With deep and narrow welds produced using an over-alloyed filler metal, it may be c...

(This article belongs to the Special Issue Welding of Steels)
  • Article
  • Open Access
1 Citations
1,894 Views
10 Pages

Analyzing the Influence of Titanium Content in 5087 Aluminum Filler Wires on Metal Inert Gas Welding Joints of AA5083 Alloy

  • Jiaolong Liu,
  • Xin Nai,
  • Hao Ran,
  • Pengcheng Wang and ,
  • Haiyan Chen,
  • Xianqi Meng,
  • Xiaojun Chen,
  • Wenya Li and
  • Yuzeng Chen
  • + 4 authors+ 0 author

14 October 2024

As the demand for lightweight structures in the transportation industry continues to rise, AA5083 aluminum alloy has become increasingly prominent due to its superior corrosion resistance and weldability. To facilitate the production of high-quality,...

(This article belongs to the Topic Interfacial Bonding Design and Applications in Structural and Functional Materials)
  • Proceeding Paper
  • Open Access
3 Citations
1,371 Views
5 Pages

Studies on In Situ Alloy Formation Using Mild Steel–Inconel 625 Twin Filler Wire Gas Tungsten Arc Weld Deposition

  • Denny Jacob John,
  • Koteswara Rao Sajja Rama,
  • Lakshminarayanan K. Adhimoolam and
  • Joshua Amalraj

1 February 2024

This work explored the possibility of producing a compositional functionally graded material (FGM) between mild steel and Inconel 625. An in-house fabricated, dual filler wire tungsten inert gas welding set up was used to deposit weld beads on a mild...

(This article belongs to the Proceedings of The International Conference on Processing and Performance of Materials (ICPPM 2023))
  • Article
  • Open Access
7 Citations
2,958 Views
17 Pages

Effect of Filler Wire on Mechanical Properties, Microstructure and Natural Aging Behavior of 2A55 Al-Li Alloy TIG Welded Joint

  • Zhihao Liu,
  • Pingli Liu,
  • Hui Xiang,
  • Yang Huang and ,
  • Pengcheng Ma,
  • Yonglai Chen,
  • Jinfeng Li and
  • Ruifeng Zhang
  • + 3 authors+ 0 author

9 February 2023

2A55 Al-Li alloy is considered to have potential applications in the manufacture of fuel tanks for aerospace vehicles. However, the composition design of filler wires for 2A55 Al-Li alloy TIG welding has not been fully studied. This work focuses on t...

  • Article
  • Open Access
3 Citations
3,144 Views
13 Pages

26 January 2023

A nickel-based filler wire, Inconel 82, was applied to weld a high-silicon steel plate with a chemical composition in wt% of 2.6 Si, 0.5 Al and Fe balance. The chemical composition of the heterogeneous weld bead was deviated from that of the conventi...

(This article belongs to the Special Issue Laser Welding Technology)
  • Feature Paper
  • Article
  • Open Access
16 Citations
3,171 Views
19 Pages

Residual Stress Reduction with the LTT Effect in Low Carbon Manganese-Steel through Chemical Composition Manipulation Using Dissimilar Filler Material in Laser Beam Welding

  • Fatma Akyel,
  • Maximilian Gamerdinger,
  • Simon Olschok,
  • Uwe Reisgen and ,
  • Alexander Schwedt and
  • Joachim Mayer
  • + 1 author+ 0 author

26 May 2022

This paper investigates the manipulation of chemical composition of a laser weld by dissimilar filler material and its effect on residual stress. The aim is to minimize residual stresses in the weld seam. In order to negate residual stresses, dissimi...

(This article belongs to the Special Issue Experimental, Modeling, Simulation and Optimization of Laser Processing in Metallic Materials)
  • Article
  • Open Access
26 Citations
4,747 Views
31 Pages

Effect of Exothermic Additions in Core Filler on Arc Stability and Microstructure during Self-Shielded, Flux-Cored Arc Welding

  • Vasyl Lozynskyi,
  • Bohdan Trembach,
  • Egidijus Katinas,
  • Kostiantyn Sadovyi and ,
  • Michal Krbata,
  • Oleksii Balenko,
  • Ihor Krasnoshapka,
  • Olena Rebrova,
  • Sergey Knyazev and
  • Liubomyr Ropyak
  • + 7 authors+ 2 authors

31 March 2024

In the conditions of an energy crisis, an important issue is the increase in energy efficiency and productivity of welding and hardfacing processes. The article substantiates the perspective of using exothermic additives introduced into core filler f...

(This article belongs to the Special Issue Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties)
  • Article
  • Open Access
6 Citations
2,785 Views
17 Pages

19 August 2022

This paper sought to determine corrosion resistance changes in the artificial saliva of a CoCrMoW-based alloy used for dental prostheses under Nd:YAG laser welding with CoCr alloy and stainless steel wire filler metals. The paper presents the corrosi...

(This article belongs to the Special Issue Corrosion Resistance of Alloy and Coating Materials)
  • Article
  • Open Access
4 Citations
4,326 Views
25 Pages

1 November 2021

Achieving a higher quality in wire arc additive manufacturing (WAAM) is a result of the development of welding metallurgy, the development of filler wires, and the control of the thermophysical properties of the electric arc. In this paper, the autho...

(This article belongs to the Special Issue Advances in Additive Manufacturing of Metals)
  • Article
  • Open Access
13 Citations
6,477 Views
18 Pages

Tungsten inert gas (TIG) welding of austenitic stainless steels is a critical process used in industries. Several properties of the welds must be controlled depending on the application. These properties, which include the geometrical, mechanical and...

  • Article
  • Open Access
22 Citations
3,506 Views
14 Pages

21 June 2022

The field of complex concentrated alloys offers a very large number of variations in alloy composition. The achievable range of properties varies greatly within these variants. The experimental determination of the properties is in many cases laborio...

(This article belongs to the Special Issue Metal Additive Manufacturing and its Applications: From the Material to Components Service Life)
  • Article
  • Open Access
21 Citations
5,100 Views
25 Pages

Mechanical Characterization of Hybrid Steel Wire Mesh/Basalt/Epoxy Fiber-Reinforced Polymer Composite Laminates

  • Mohamad Yusuf Bin Salim,
  • Ali Farokhi Nejad,
  • Mohd Yazid Yahya,
  • Tobias Dickhut and
  • Seyed Saeid Rahimian Koloor

Hybrid composite materials have been widely used to advance the mechanical responses of fiber-reinforced composites by utilizing different types of fibers and fillers in a single polymeric matrix. This study incorporated three types of fibers: basalt...

(This article belongs to the Section Metal Composites)
  • Article
  • Open Access
18 Citations
3,930 Views
19 Pages

1 February 2024

Due to high filler loading, clean, commercial, thermoplastic, flame-retardant materials are mechanically unstable when insulating wires and cables. In this study, composite formulations of linear low-density polyethylene (LLDPE)/ethylene–vinyl...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
11 Citations
1,860 Views
43 Pages

Optimisation of Elemental Transfer Efficiency in Fe-C-Cr-Ti-Cu Hardfacing by Self-Shielded Flux-Cored Wire: A Synergistic Taguchi–ANOVA–FD–PCA–GRA Approach

  • Bohdan Trembach,
  • Michal Krbata,
  • Borys Haibadulov,
  • Oleksandr Iokhov and ,
  • Ivan Tsebriuk,
  • Ihor Pomohaiev,
  • Yurii Korobkov and
  • Larysa Neduzha
  • + 3 authors+ 0 author

20 March 2026

The objective of this article is to optimise the deposition modes and the content of exothermic additions (EAs) in the core filler in Fe-C-Cr-Ti with Cu additions hardfacing. To achieve this, JMatPro Release 7.0, Sente Software Ltd., 2016 material ch...

(This article belongs to the Special Issue Advanced Metal Surface Engineering: Enhancing Durability, Performance, and Sustainability)
  • Article
  • Open Access
8 Citations
4,297 Views
14 Pages

11 February 2021

In this study, AA 6063 aluminum was joined using Tungsten Inert Gas (TIG) welding with a butt joint. The ER-5356 filler metal feeding method is used intermittently to find its effect on weld geometry, mechanical properties, microstructure, and chemic...

  • Article
  • Open Access
13 Citations
4,729 Views
15 Pages

High-Frequency Magnetoimpedance (MI) and Stress-MI in Amorphous Microwires with Different Anisotropies

  • Junaid Alam,
  • Makhsudsho Nematov,
  • Nikolay Yudanov,
  • Svetlana Podgornaya and
  • Larissa Panina

Magnetoimpedance (MI) in Co-based microwires with an amorphous and partially crystalline state was investigated at elevated frequencies (up to several GHz), with particular attention paid to the influence of tensile stress on the MI behavior, which i...

(This article belongs to the Special Issue Novel Magnetic Properties in Curved Geometries)
  • Article
  • Open Access
1 Citations
1,022 Views
24 Pages

This study investigates the effect of Gas Metal Arc Welding (GMAW) parameters on solidification cracking and mechanical behavior of AA6061 and AA7075 aluminum alloys, which are widely used in automotive, aerospace, and battery-related applications du...

(This article belongs to the Special Issue Advances in Welding Technology: 2nd Edition)
  • Article
  • Open Access
22 Citations
4,500 Views
15 Pages

18 September 2019

A semi-solid stir casting mixed multi-pass rolling process was successfully employed to manufacture TiCp/Al-5Mg composite filler wires with different contents of TiC particles. The 5083-H116 aluminum alloys were joined by tungsten inert gas (TIG) usi...

  • Article
  • Open Access
172 Citations
15,825 Views
9 Pages

Wire and Arc Additive Manufacturing of Aluminum Components

  • Markus Köhler,
  • Sierk Fiebig,
  • Jonas Hensel and
  • Klaus Dilger

24 May 2019

An increasing demand for flexibility and product integration, combined with reduced product development cycles, leads to continuous development of new manufacturing technologies such as additive manufacturing. Wire and arc additive manufacturing (WAA...

(This article belongs to the Special Issue Arc-based Additive Manufacturing)
  • Article
  • Open Access
11 Citations
3,246 Views
16 Pages

Cement Composites with Graphene Nanoplatelets and Recycled Milled Carbon Fibers Dispersed in Air Nanobubble Water

  • Anastasia I. Patrinou,
  • Eirini Tziviloglou,
  • Athanasios Varoutoglou,
  • Evangelos P. Favvas and ,
  • Athanasios C. Mitropoulos,
  • George Z. Kyzas and
  • Zoi S. Metaxa
  • + 2 authors+ 0 author

14 August 2022

The individual effect of nano- and micro-carbon-based fillers on the mechanical and the electrical properties of cement paste were experimentally examined in this study. The objective of the study was to separately examine the effects of size and mor...

(This article belongs to the Special Issue Mechanics of Micro- and Nano-Size Materials and Structures)
  • Article
  • Open Access
627 Views
31 Pages

Magnetic Composites for Advanced Characterization of Magnetic Field Sensors and Biosensors

  • Ekaterina A. Burban,
  • Alexander P. Safronov,
  • Ksenia O. Il’inova,
  • Grigory Yu. Melnikov and ,
  • Andrey V. Svalov,
  • Igor V. Beketov,
  • Anton A. Yushkov and
  • Galina V. Kurlyandskaya
  • + 3 authors+ 0 author

14 June 2026

Gadolinium is a rare-earth element that is promising for the field of biomedicine due to its unique properties that enhance image quality, giving it high potential in targeted cancer therapy, antimicrobial treatments, etc. The disadvantage of Gd-cont...

(This article belongs to the Section Sensor Materials)
  • Article
  • Open Access
3 Citations
2,692 Views
25 Pages

Thermal Evaluation of Silica-Based Insulated Magnet Wires from the Sol–Gel Process

  • Giovana Pereira dos Santos Lima,
  • Sonia Ait-Amar,
  • Gabriel Velu,
  • Philippe Frezel and ,
  • Abdelhamid Boudiba,
  • Soumaya Lafqir,
  • Arnaud Nicolay,
  • Pierre-yves Herze and
  • Mireille Poelman
  • + 4 authors+ 0 author

31 July 2023

The conventional enameling process used in the fabrication of magnet wires requires harmful processes and products. The target of the industry in the actual context of electrification is to increase the electrical machines’ efficiency. Indeed,...

(This article belongs to the Special Issue Advances in Functional Gel)
  • Article
  • Open Access
18 Citations
3,452 Views
15 Pages

Dielectric and AC Breakdown Properties of SiO2/MMT/LDPE Micro–Nano Composites

  • Hongtao Jiang,
  • Xiaohong Zhang,
  • Junguo Gao and
  • Ning Guo

24 February 2021

Low-density polyethylene (LDPE) is an important thermoplastic material which can be made into films, containers, wires, cables, etc. It is highly valued in the fields of packaging, medicine, and health, as well as cables. The method of improving the...

(This article belongs to the Special Issue Selected Papers from 2020 IEEE International Conference on High Voltage Engineering (ICHVE 2020))
  • Article
  • Open Access
18 Citations
3,495 Views
11 Pages

11 February 2022

The growing increase in the production of municipal solid waste incinerator (MSWI) ashes has led to the research of new possibilities to reuse these by-products. This work aims to use MSW fly ash (FA) as a flame retardant filler. The FA was stabilize...

(This article belongs to the Section Sustainable Materials)
  • Article
  • Open Access
14 Citations
2,831 Views
16 Pages

Research on the Microstructure and Properties of Al Alloy/Steel CMT Welding-Brazing Joints with Al–Si Flux-Cored Welding Wires

  • Haodong Liu,
  • Juan Pu,
  • Mingfang Wu,
  • Chao Zhang and ,
  • Jiawei Rao,
  • Weimin Long and
  • Yuanxun Shen
  • + 2 authors+ 0 author

12 September 2023

Al alloy/steel composite structures combine the advantage of a lightweight Al alloy and high-strength steel and are widely used in new energy vehicles, solar photovoltaic, and other fields. The main problems with the connection of an Al alloy and ste...

  • Article
  • Open Access
19 Citations
7,772 Views
10 Pages

A New Method for Weld Dilution Calculation through Chemical Composition Analysis

  • Zhanhui Zhang,
  • Xuefei Huang,
  • Ping Yao and
  • Jiaxiang Xue

11 January 2021

Aiming at existing methods unable to reveal the definition of dilution in welding accurately, such as the limited formula’s range of 0~1 mathematically, a new way which can be widely applied to various welds alloying either one or more composit...

  • Article
  • Open Access
2 Citations
2,260 Views
16 Pages

6 October 2024

The mechanical properties and cross-sectional geometric dimensions of the fusion zone (FZ), heat affected zone (HAZ), and base metal (BM) of 6xxx series aluminum alloys are inconsistent after filler wire welding, which reduces the formability of alum...

(This article belongs to the Special Issue Advanced Manufacturing Processes: Technologies and Applications)
  • Article
  • Open Access
12 Citations
3,868 Views
12 Pages

Microstructures and Electrical Resistivity of Aluminum–Copper Joints

  • Jinchang Guo,
  • Chunkai Li,
  • Jianxiao Bian,
  • Jianrui Zhang and
  • Baolong Geng

16 August 2023

Using pulsed double electrode-gas metal arc welding, aluminum wires are joined to copper plates with fillers of different fractions of silicon. Two layers of different microstructures are formed near the Al-Cu interface: one consists of a hypoeutecti...

(This article belongs to the Special Issue Microstructure and Mechanical Property Improvement of Welded Metal Joints)
  • Article
  • Open Access
7 Citations
2,640 Views
10 Pages

Synthesis of a Cyclophosphazene Derivative Containing Multiple Cyano Groups for Electron-Beam Irradiated Flame-Retardant Materials

  • Bingbing Leng,
  • Jiayu Yang,
  • Chunhui Zhu,
  • Zhipeng Wang and ,
  • Chengying Shi,
  • Yang Liu,
  • Hongyan Zhang,
  • Wenge Xu and
  • Baijun Liu
  • + 4 authors+ 0 author

9 October 2021

A cyclophosphazene derivative containing multiple cyano groups, denoted as hexa(4-cyanophenoxy)cyclotriphosphazene (CN-CP), was synthesized by a one-step nucleophilic substitution reaction for a phosphorus-nitrogen flame retardant. To meet the strict...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
1 Citations
1,874 Views
13 Pages

12 April 2025

Metal inert gas (MIG) brazing was used to join galvanized thin sheets with thicknesses in the range of 0.8 to 2 mm in a lap joint configuration using CuAl8 wire as filler. The process was used to manufacture built-up cold-formed steel beams composed...

(This article belongs to the Special Issue Welding and Joining of Metallic Materials: Microstructure and Mechanical Properties, 2nd Edition)
  • Article
  • Open Access
14 Citations
3,492 Views
15 Pages

New PMMA-Based Hydroxyapatite/ZnFe2O4/ZnO Composite with Antibacterial Performance and Low Toxicity

  • Olga Bakina,
  • Natalia Svarovskaya,
  • Ludmila Ivanova,
  • Elena Glazkova and ,
  • Nikolay Rodkevich,
  • Vladyslav Evstigneev,
  • Maxim Evstigneev,
  • Andrey Mosunov and
  • Marat Lerner
  • + 4 authors+ 0 author

Polymethylmethacrylate (PMMA) is the most commonly used bone void filler in orthopedic surgery. However, the biocompatibility and radiopacity of PMMA are insufficient for such applications. In addition to insufficient biocompatibility, the microbial...

(This article belongs to the Special Issue Functional Biomimetic Materials and Devices for Biomedical Applications)
  • Article
  • Open Access
1 Citations
1,738 Views
21 Pages

The Influence of Alloy Composition on Microstructure and Performance of Mixed-Smelting Alloy and Weld Metal

  • Guangnan Ge,
  • Jin Hu,
  • Zongqiu Hu,
  • Haijun Li and ,
  • Yan Huo,
  • Shawei Tang,
  • Yi Liu,
  • Junfeng Ding,
  • Shipu Hou and
  • Yunbao Gao
  • + 5 authors+ 0 author

25 September 2024

In the present work, the Q345B low-alloy steel with different contents and ER309L stainless steel were melted together to obtain new alloys. The aim was to design the composition of weld metal (Q345B low-alloy steel as the base material and ER309L we...

  • Feature Paper
  • Article
  • Open Access
38 Citations
8,174 Views
22 Pages

15 June 2019

In this study, multicomponent flame retardant systems, consisting of ammonium polyphosphate (APP), aluminum trihydroxide (ATH), and polyaniline (PANI), were used in ethylene propylene diene monomer (EPDM) rubber. The multicomponent system was designe...

(This article belongs to the Special Issue Advanced Methods of Flame Retardant Treatment of Polymeric Materials)
  • Article
  • Open Access
19 Citations
12,547 Views
16 Pages

8 May 2019

When designing piping systems for various industrial facilities, carbon steel and stainless steel are widely being used. In order to satisfy design requirements in the piping systems, the two different materials are often welded in various cases. The...

  • Article
  • Open Access
4 Citations
1,110 Views
31 Pages

Flexural Performance of Geopolymer-Based Composite Beams Under Different Curing Regimes

  • Feyyaz Unver,
  • Mucteba Uysal,
  • Beyza Aygun,
  • Turhan Bilir and ,
  • Turgay Cosgun,
  • Mehmet Safa Aydogan and
  • Guray Arslan
  • + 2 authors+ 0 author

21 January 2026

Electrical curing is a viable alternative to traditional thermal curing for geopolymer materials due to its capability for rapid and internal geopolymerization. In this research, reinforced geopolymer-based composite beams were successfully fabricate...

  • Article
  • Open Access
27 Citations
4,652 Views
30 Pages

Experimental Investigation and Parametric Optimization of the Tungsten Inert Gas Welding Process Parameters of Dissimilar Metals

  • Anteneh Teferi Assefa,
  • Gulam Mohammed Sayeed Ahmed,
  • Sagr Alamri,
  • Abhilash Edacherian and ,
  • Moera Gutu Jiru,
  • Vivek Pandey and
  • Nazia Hossain
  • + 2 authors+ 0 author

23 June 2022

Special attention is required when joining two materials with distinct chemical, physical and thermal properties in order to make the joint bond robust and rigid. The goal of this study was to see how significantly different tungsten inert gas (TIG)...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
49 Citations
5,065 Views
17 Pages

Microstructures and Properties of Al-Mg Alloys Manufactured by WAAM-CMT

  • Yan Liu,
  • Zhaozhen Liu,
  • Guishen Zhou,
  • Chunlin He and
  • Jun Zhang

8 August 2022

A wire arc additive manufacturing system, based on cold metal transfer technology, was utilized to manufacture the Al-Mg alloy walls. ER5556 wire was used as the filler metal to deposit Al-Mg alloys layer by layer. Based on the orthogonal experiments...

(This article belongs to the Special Issue Research Progress in High-Performance Magnesium Alloy and Its Applications)
  • Article
  • Open Access
5 Citations
1,048 Views
20 Pages

Effect of CMT Welding Heat Input on Microstructure and Mechanical Properties of Different Groove Angles for Al-6061-T6 Alloy Joint

  • Guo Xian,
  • Zhen Gao,
  • Yunfeng Fu,
  • Zhao Ding and ,
  • Xianshu Que and
  • Jingbang Pan
  • + 1 author+ 0 author

25 November 2025

Air suspension components are critical elements of automotive chassis and are commonly fabricated by welding 6061-T6 aluminum using 4043 filler wire with the cold metal transfer (CMT) process. Variations in vehicle architecture necessitate different...

(This article belongs to the Special Issue Advances in Welding and Joining of Alloys and Steel)
  • Article
  • Open Access
5 Citations
2,865 Views
16 Pages

Design of Spherical Gel-Based Magnetic Composites: Synthesis and Characterization

  • Pavel A. Shabadrov,
  • Alexander P. Safronov,
  • Nadezhda M. Kurilova and
  • Felix A. Blyakhman

The purpose of the study was the synthesis and the physicochemical characterization of spherical beads of magnetically active composite ferrogels (FGs) with diameters of 2–3 mm for further application to the needs of targeted drug delivery and/...

(This article belongs to the Section Polymer Composites)
  • Article
  • Open Access
6 Citations
1,381 Views
20 Pages

12 September 2025

Due to their high strength-to-weight ratio and corrosion resistance, glass fiber reinforced polymer (GFRP) composites have been used in various civil structures. However, the GFRP profiles may be perforated to allow bolting, wiring, and pipelining, c...

(This article belongs to the Special Issue Mechanical Behavior and Functional Applications of Fiber-Reinforced Composite Materials and Structures)
  • Article
  • Open Access
1 Citations
1,935 Views
13 Pages

17 August 2024

Weld surfacing is the process of applying a layer of metal to the surface of metal objects by simultaneously melting the substrate. As a result of this process, the metal content of the padding weld can be as high as several tens of percents. It is a...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
1 Citations
1,410 Views
21 Pages

Duplex stainless steel (DSS) blends impressive mechanical and chemical characteristics to withstand aggressive environments. Its fabrication by Gas Metal Arc Welding-Additive Manufacturing is an emerging research topic. However, its sensitive grain s...

(This article belongs to the Section Innovations in Materials Science and Materials Processing)

of 2