Skip to Content

4,372 Results Found

  • Article
  • Open Access
27 Citations
5,072 Views
22 Pages

Experimental Characterization of Composite-Printed Materials for the Production of Multirotor UAV Airframe Parts

  • Tomislav Šančić,
  • Marino Brčić,
  • Denis Kotarski and
  • Andrzej Łukaszewicz

18 July 2023

In this paper, the characterization of 3D-printed materials that are considered in the design of multirotor unmanned aerial vehicles (UAVs) for specialized purposes was carried out. The multirotor UAV system is briefly described, primarily from the a...

(This article belongs to the Topic Design, Simulation and New Applications of Unmanned Aerial Vehicles)
  • Review
  • Open Access
1,011 Views
45 Pages

Experimental Characterization of Steel and Concrete as Construction Materials: State-of-the-Art Methods and Advances Beyond Standardized Testing

  • Marko Topalović,
  • Vladimir Milovanović,
  • Vladimir Dunić,
  • Miroslav Živković and
  • Snežana Vulović

10 June 2026

Construction materials like steel and concrete have been used for thousands of years; however, their industrial-scale production began relatively recently in the 19th century. These materials are still being improved as the drive to build taller buil...

(This article belongs to the Special Issue Experimental Testing and Numerical Modelling for Structural Dynamics)
  • Article
  • Open Access
7 Citations
4,203 Views
17 Pages

Experimental Comparison of Three Characterization Methods for Two Phase Change Materials Suitable for Domestic Hot Water Storage

  • Maxime Thonon,
  • Laurent Zalewski,
  • Stéphane Gibout,
  • Erwin Franquet and ,
  • Gilles Fraisse and
  • Mickael Pailha
  • + 1 author+ 0 author

1 November 2021

This study presents an experimental comparison of three characterization methods for phase change materials (PCM). Two methods were carried out with a calorimeter, the first with direct scanning (DSC) and the second with step scanning (STEP). The thi...

(This article belongs to the Special Issue The Application of Phase Change Materials in Heat Storage)
  • Review
  • Open Access
43 Citations
7,877 Views
47 Pages

Review on the Experimental Characterization of Fracture in Active Material for Lithium-Ion Batteries

  • Francesca Pistorio,
  • Davide Clerici,
  • Francesco Mocera and
  • Aurelio Somà

2 December 2022

Nowadays, lithium-ion batteries are one of the most widespread energy storage systems, being extensively employed in a large variety of applications. A significant effort has been made to develop advanced materials and manufacturing processes with th...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Article
  • Open Access
3 Citations
1,950 Views
17 Pages

31 October 2023

This research aims to investigate the impact of incorporating porous materials on reducing noise and vibration in wooden floor panels, and to analyze the vibroacoustic performance of the assembled panel under different types of excitation and boundar...

  • Article
  • Open Access
4 Citations
2,044 Views
14 Pages

Artificial Intelligence Approach for Bio-Based Materials’ Characterization and Explanation

  • Ahmed Alami,
  • Lala Rajaoarisoa,
  • Nicolas Dujardin,
  • Ali Benouar and ,
  • Khacem Kaddouri,
  • Khedidja Benouis and
  • Mohammed-Hichem Benzaama
  • + 2 authors+ 0 author

This paper introduces a numerical methodology for classifying and identifying types of bio-based materials through experimental thermal characterization. In contrast to prevailing approaches that primarily focus on thermal conductivity, our character...

(This article belongs to the Collection Sustainable and Green Construction Materials)
  • Feature Paper
  • Article
  • Open Access
14 Citations
3,964 Views
25 Pages

29 March 2022

Titanium alloys are considered difficult-to-cut materials due to their low machinability. Understanding the physical mechanisms occurring during cutting titanium alloys is of particular interest to improve their machinability. Experimental and numeri...

  • Article
  • Open Access
9 Citations
3,402 Views
16 Pages

29 November 2023

In the context of the energy transition, new construction materials are emerging, notably bio-based materials such as wood concrete. This paper investigates the hygrothermal performance of walls constructed with wood–cement concrete. First, the...

(This article belongs to the Special Issue Multiphysics Analysis of Construction Materials)
  • Article
  • Open Access
917 Views
21 Pages

Mesoscale Linear Elastic Modeling and Homogenization of Marine Energy Composites

  • Peter J. Creveling,
  • Evan M. Anderson,
  • Olivia Blank,
  • David Miller and
  • Bernadette A. Hernandez-Sanchez

24 October 2025

The design of fiber-reinforced composite (FRC)-based components for marine energy applications necessitates a fundamental understanding of material properties and the resulting geometry to predict long-term performance. In this work, we present a mod...

  • Article
  • Open Access
182 Views
51 Pages

Large Format Additive Manufacturing (LFAM) is becoming a promising technology to manufacture composite structures. It offers greater freedom to generate complex mold geometries, while providing reduced cost and lead times. This study is focused on ch...

  • Article
  • Open Access
31 Citations
8,343 Views
24 Pages

Mechanical Characterization of the Plastic Material GF-PA6 Manufactured Using FDM Technology for a Compression Uniaxial Stress Field via an Experimental and Numerical Analysis

  • Jorge Manuel Mercado-Colmenero,
  • Cristina Martin-Doñate,
  • Vincenzo Moramarco,
  • Michele Angelo Attolico and ,
  • Gilda Renna,
  • Moises Rodriguez-Santiago and
  • Caterina Casavola
  • + 2 authors+ 0 author

20 January 2020

This manuscript presents an experimental and numerical analysis of the mechanical structural behavior of Nylstrong GF-PA6, a plastic material manufactured using FDM (fused deposition modeling) technology for a compression uniaxial stress field. First...

(This article belongs to the Special Issue Functional Polymers in Additive Manufacturing)
  • Article
  • Open Access
70 Citations
8,749 Views
20 Pages

Addition of Graphite Filler to Enhance Electrical, Morphological, Thermal, and Mechanical Properties in Poly (Ethylene Terephthalate): Experimental Characterization and Material Modeling

  • Basheer A. Alshammari,
  • Fahad S. Al-Mubaddel,
  • Mohammad Rezaul Karim,
  • Mokarram Hossain and ,
  • Abdullah S. Al-Mutairi and
  • Arthur N. Wilkinson
  • + 1 author+ 0 author

28 August 2019

Poly(ethylene terephthalate)/graphite (PET/G) micro-composites were fabricated by the melt compounding method using a minilab extruder. The carbon fillers were found to act as nucleating agents for the PET matrix and hence accelerated crystallization...

  • Article
  • Open Access
1 Citations
2,485 Views
22 Pages

Geomechanical Characterization of a Brazilian Experimental Site: Testing, Interpretation, and Material Properties

  • Jair de Jesús Arrieta Baldovino,
  • Yamid E. Nuñez de la Rosa and
  • Marcos Massao Futai

28 June 2024

Clarity in monitoring existing foundation structures demands innovative safety analysis methodologies for deep foundations, necessitating advanced models calibrated with real-world field parameters. Understanding controlled conditions, including geot...

  • Article
  • Open Access
1,633 Views
20 Pages

Crossland Tankers is a leading manufacturer of bulk-load road tankers in Northern Ireland. These tankers transport up to forty thousand litres of liquid over long distances across diverse road conditions. Liquid sloshing within the tank has a signifi...

(This article belongs to the Section Computational Engineering)
  • Article
  • Open Access
23 Citations
4,825 Views
14 Pages

6 September 2020

This work aims to identify the damping properties of a commercial viscoelastic material that can be embedded and cured between the layers of composite laminates. The material may be adopted for reducing the vibration response of composite panels, typ...

(This article belongs to the Special Issue Composite Materials in Design Processes)
  • Article
  • Open Access
1 Citations
609 Views
17 Pages

The transition from sinusoidal to pulse width-modulated (PWM) voltage excitation introduces high-frequency ripple, generating small remagnetization cycles within the main magnetization cycle and increasing total iron losses. Soft magnetic materials a...

(This article belongs to the Section Industrial Electronics)
  • Article
  • Open Access
7 Citations
2,521 Views
14 Pages

Preparation, Characterization and Application of Novel Photocatalytic Two-Dimensional Material Membrane: A Reform of Comprehensive Experimental Teaching

  • Guangyong Zeng,
  • Hu Zheng,
  • Kun Zhou,
  • Hao Shi and ,
  • Size Zheng,
  • Hui Ma,
  • Peng Wang and
  • Shengyan Pu
  • + 3 authors+ 0 author

21 July 2023

Recently, two-dimensional materials (2DM) have garnered considerable interest in the field of membrane separation owing to their distinctive microstructure and chemical properties. However, membrane fouling still limits the further application of 2DM...

(This article belongs to the Section Sustainable Education and Approaches)
  • Article
  • Open Access
771 Views
20 Pages

14 July 2026

Rigid polyurethane foam was evaluated as a filler material for a tubular railway vehicle energy absorber. Cubic samples cut from a cylindrical PU foam sample with a density of 175 kg/m3 were tested under quasi-static uniaxial compression to determine...

(This article belongs to the Special Issue Advanced Polymer Foam: Structural Control and Material Performance)
  • Article
  • Open Access
20 Citations
3,937 Views
15 Pages

11 September 2020

Phase change materials (PCMs) are promising materials for the energy efficiency improvement of building enclosures, due to their energy storage capacity. The thermal behaviour of a multi-layered building enclosure with five different compositions of...

(This article belongs to the Special Issue Energy in Construction and Building Materials)
  • Article
  • Open Access
7 Citations
4,967 Views
34 Pages

12 May 2021

The experimental and numerical analyses of the pressure vessels with different flat ends are presented and discussed in the paper. The main aim of the study is to propose the optimal flat head end geometry. The analyses are focused on the comparison...

  • Editorial
  • Open Access
2 Citations
2,757 Views
9 Pages

3 April 2023

As an important part in new energy storage devices, electrodes containing metals or their corresponding derivatives are widely used due to the diversity of material types, existing forms and assembly methods. In order to obtain novel energy storage c...

(This article belongs to the Special Issue Manufacturing and Characterization of Metallic Electrode Materials)
  • Article
  • Open Access
40 Citations
4,475 Views
18 Pages

Experimental Modal Analysis and Characterization of Additively Manufactured Polymers

  • Hieu Tri Nguyen,
  • Kelly Crittenden,
  • Leland Weiss and
  • Hamzeh Bardaweel

19 May 2022

Modern 3D printed components are finding applications in dynamic structures. These structures are often subject to dynamic loadings. To date, research has mostly focused on investigating the mechanical properties of these 3D printed structures with m...

(This article belongs to the Special Issue Applications of 3D Printing for Polymers)
  • Article
  • Open Access
65 Citations
7,048 Views
16 Pages

Experimental Characterization Framework for SLA Additive Manufacturing Materials

  • Jordi Martín-Montal,
  • Jesus Pernas-Sánchez and
  • David Varas

2 April 2021

Additive manufacturing (AM) is driving a change in the industry not only regarding prototyping but due to the ease of including printed parts in final designs. Engineers and designers can go deeper into optimization and improvements of their designs...

(This article belongs to the Special Issue Mechanical Performance of Polymeric Parts Obtained by Additive Manufacturing)
  • Proceeding Paper
  • Open Access
5 Citations
2,975 Views
7 Pages

Experimental Characterization of the Self-Healing Capacity of Cement Based Materials: An Overview

  • Liberato Ferrara,
  • Estefania Cuenca Asensio,
  • Francesco Lo Monte,
  • Marta Roig Flores and ,
  • Mercedes Sanchez Moreno,
  • Didier Snoeck,
  • Tim Van Mullem and
  • Nele De Belie
  • + 3 authors+ 0 author

This paper, prepared in the framework of the COST Action SARCOS WG2 activities (http://www.cost.eu/COST_Actions/ca/CA15202), provides an overview of the main concepts underlying the experimental characterization of the self-sealing capacity of cement...

(This article belongs to the Proceedings of The 18th International Conference on Experimental Mechanics)
  • Article
  • Open Access
2 Citations
2,009 Views
32 Pages

Material Characterization and Stress-State-Dependent Failure Criteria of AASHTO M180 Guardrail Steel: Experimental and Numerical Investigation

  • Qusai A. Alomari,
  • Tewodros Y. Yosef,
  • Robert W. Bielenberg,
  • Ronald K. Faller and ,
  • Mehrdad Negahban,
  • Zesheng Zhang,
  • Wenlong Li and
  • Brandt M. Humphrey
  • + 3 authors+ 0 author

27 May 2025

As a key roadside safety feature, longitudinal guardrail steel barriers are purposefully designed to contain and redirect errant vehicles to prevent roadway departure, dissipate impact energy through plastic deformation, and reduce the severity of ve...

(This article belongs to the Special Issue From Materials to Applications: High-Performance Steel Structures)
  • Review
  • Open Access
293 Citations
14,715 Views
25 Pages

Characterization of the Mechanical Properties of FFF Structures and Materials: A Review on the Experimental, Computational and Theoretical Approaches

  • Enrique Cuan-Urquizo,
  • Eduardo Barocio,
  • Viridiana Tejada-Ortigoza,
  • R. Byron Pipes and ,
  • Ciro A. Rodriguez and
  • Armando Roman-Flores
  • + 1 author+ 0 author

18 March 2019

The increase in accessibility of fused filament fabrication (FFF) machines has inspired the scientific community to work towards the understanding of the structural performance of components fabricated with this technology. Numerous attempts to chara...

  • Article
  • Open Access
6 Citations
4,273 Views
20 Pages

8 May 2023

High-frequency transformer core materials are used in power converter applications due to high efficiency performance. Their volume and weight can be reduced when higher operating frequencies are used but at the expense of an increase in core materia...

(This article belongs to the Topic Efficient Manufacturing: Materials, Processes, and Systems)
  • Article
  • Open Access
5 Citations
2,720 Views
11 Pages

QCM Measurements of RH with Nanostructured Carbon-Based Materials: Part 2-Experimental Characterization

  • Ada Fort,
  • Anna Lo Grasso,
  • Marco Mugnaini,
  • Enza Panzardi and ,
  • Lorenzo Parri,
  • Valerio Vignoli,
  • Cecilia Viti,
  • Ammar Al-Hamry and
  • Olfa Kanoun
  • + 4 authors+ 0 author

In this series of two papers, the humidity sensing of a carbon nanotube (CNT) network-based material is transduced and studied through quartz crystal microbalance (QCM) measurements. To this aim, quartzes functionalized with different amounts of sens...

(This article belongs to the Special Issue Gas Sensors: Simulation, Modeling, and Characterization)
  • Article
  • Open Access
9 Citations
5,925 Views
27 Pages

14 September 2021

In order to correctly define the pathology of multiple-leaf stonemasonry walls and determine the appropriate interventions for its conservation and preservation, comprehensive studies on its building materials should be carried out since the overall...

(This article belongs to the Special Issue In Honor of Prof. Liritzis Ioannis: Essays in Archaeology & Archaeometry and the Hellenic Contribution to Egyptology)
  • Article
  • Open Access
7 Citations
3,133 Views
12 Pages

Experimental Characterization of an AC–DC Boost for Energy Harvesting Device Based on Magnetostrictive Materials

  • Carmine Stefano Clemente,
  • Daniele Davino,
  • Immacolato Iannone and
  • Vincenzo Paolo Loschiavo

15 January 2024

Magnetostrictive alloys hold great promise for Energy Harvesting applications due to their inherent durability. However, their implementation often results in usable voltage ranges that fall significantly below common electronic standards like 1.6, 3...

  • Article
  • Open Access
19 Citations
4,560 Views
18 Pages

26 July 2020

In this study, the open-hole quasi-static tensile and fatigue loading behavior of a multidirectional CFRP thick laminate, representative of laminates used in the aerospace industry, is studied. Non-destructive techniques such as infrared thermographi...

(This article belongs to the Special Issue Sensors in Experimental Mechanics)
  • Article
  • Open Access
4 Citations
6,625 Views
14 Pages

Experimental Characterization of Phase Change Materials for Refrigeration Processes

  • Anastasia Stamatiou,
  • Lukas Müller,
  • Roger Zimmermann,
  • Jamie Hillis and ,
  • David Oliver,
  • Kate Fisher,
  • Maurizio Zaglio and
  • Jörg Worlitschek
  • + 3 authors+ 0 author

24 May 2021

Latent heat storage units for refrigeration processes are promising as alternatives to water/glycol-based storage due to their significantly higher energy densities, which would lead to more compact and potentially more cost-effective storages. In th...

(This article belongs to the Section J: Thermal Management)
  • Article
  • Open Access
6 Citations
3,542 Views
29 Pages

Novel Methodology for Experimental Characterization of Micro-Sandwich Materials

  • Samuel Hammarberg,
  • Jörgen Kajberg,
  • Simon Larsson,
  • Ramin Moshfegh and
  • Pär Jonsén

5 August 2021

Lightweight components are in demand from the automotive industry, due to legislation regulating greenhouse gas emissions, e.g., CO2. Traditionally, lightweighting has been done by replacing mild steels with ultra-high strength steel. The development...

(This article belongs to the Section Advanced Composites)
  • Review
  • Open Access
48 Citations
7,669 Views
23 Pages

Experimental Characterization Protocols for Wear Products from Disc Brake Materials

  • Ankur Sinha,
  • Gloria Ischia,
  • Cinzia Menapace and
  • Stefano Gialanella

15 October 2020

The increasing interest in the emission from the disc brake system poses new challenges for the characterization approaches used to investigate the particles emitted from the wearing out of the relevant tribological systems. This interest stems from...

(This article belongs to the Special Issue Study of Brake Wear Particle Emissions)
  • Proceeding Paper
  • Open Access
1,884 Views
8 Pages

Experimental Protocol for Nonlinear Behavior Characterization of CFRP Materials under Dynamic Loadings

  • Jordan Berton,
  • Fabien Coussa,
  • Julien Berthe,
  • Eric Deletombe and
  • Mathias Brieu

This study presents an experimental protocol for the characterization of the strain rate effects on the nonlinear behavior of an organic matrix composite. This protocol is based on the development of a displacement interrupted tensile test device ada...

(This article belongs to the Proceedings of The 19th International Conference on Experimental Mechanics)
  • Article
  • Open Access
36 Citations
6,006 Views
23 Pages

9 September 2020

The growing interest in developing applications for the storage of thermal energy (TES) is highly linked to the knowledge of the properties of the materials that will be used for that purpose. Likewise, the validity of representing processes through...

(This article belongs to the Section D1: Advanced Energy Materials)
  • Article
  • Open Access
9 Citations
5,579 Views
19 Pages

18 September 2024

The recycling of materials is in line with the policy of a closed-loop economy and is currently an option for managing waste in order to reuse it to create new products. To this end, 3D printing is being used to produce materials not only from pure p...

  • Article
  • Open Access
1 Citations
978 Views
14 Pages

An Experimental Measurement Method to Characterize and Apply Platinum Silicon Material for a Biomechanical Replica of the Thoracic Aorta

  • Mario Alberto Grave-Capistrán,
  • Francesco Lamonaca,
  • Giuseppe Carbone and
  • Christopher René Torres-SanMiguel

Currently, silicone is a common material used in medical research and biomedical applications. This research aims to characterize extra-soft platinum silicone (shore A 00 50) and compare its mechanical behavior with that of the human thoracic aorta....

(This article belongs to the Topic Biomedical Engineering, Healthcare and Sustainability, 2nd Edition)
  • Article
  • Open Access
23 Citations
5,299 Views
25 Pages

13 May 2022

In this study, the effect of seven industrial waste materials as mineral fillers in asphalt mixtures was investigated. Silica fume (SF), limestone dust (LSD), stone dust (SD), rice husk ash (RHA), fly ash (FA), brick dust (BD), and marble dust (MD) w...

(This article belongs to the Special Issue Pavement Design, Analysis and Material Characterization)
  • Proceeding Paper
  • Open Access
1,961 Views
8 Pages

For industrial applications of innovative metal forming techniques, advanced experimental methods have been developed to characterize the mechanical properties of materials under the corresponding forming conditions. This paper focuses on uniaxial te...

(This article belongs to the Proceedings of The 19th International Conference on Experimental Mechanics)
  • Article
  • Open Access
3 Citations
4,928 Views
13 Pages

Elastomer Characterization Method for Trapped Rubber Processing

  • Pooria Khalili,
  • Thomas Boulanger and
  • Brina J. Blinzler

19 March 2020

The increasing high-volume demand for polymer matrix composites (PMCs) brings into focus the need for autoclave alternative processing. Trapped rubber processing (TRP) of PMCs is a method capable of achieving high pressures during polymer matrix comp...

(This article belongs to the Special Issue Polymer Nanocomposite Interfaces; Fabrication, Properties and Simulations)
  • Essay
  • Open Access
7 Citations
3,227 Views
16 Pages

Combined Experimental and Theoretical Studies: Lattice-Dynamical Studies at High Pressures with the Help of Ab Initio Calculations

  • Francisco Javier Manjón,
  • Juan Ángel Sans,
  • Placida Rodríguez-Hernández and
  • Alfonso Muñoz

18 November 2021

Lattice dynamics studies are important for the proper characterization of materials, since these studies provide information on the structure and chemistry of materials via their vibrational properties. These studies are complementary to structural c...

(This article belongs to the Special Issue First Principles Calculations of Minerals and Related Materials)
  • Perspective
  • Open Access
240 Views
17 Pages

Generative AI Engine for Energy Materials Intelligence and Manufacturing

  • Billy Fanady,
  • Calvin C. T. Chow,
  • Zhou Wen,
  • Ning Ma and ,
  • Yao Sun,
  • Kaitao Zhang,
  • Kwok-Tong Chau,
  • Jintao Meng,
  • Feibei Chen and
  • Haitao Zhao
  • + 6 authors+ 1 author

18 October 2026

Energy materials development remains experimentally intensive because relevant knowledge is dispersed across heterogeneous sources, material formulas and processing parameters are strongly coupled, and experimental data are often incomplete. Although...

  • Article
  • Open Access
8 Citations
3,988 Views
20 Pages

18 November 2021

Complex material parameters that can represent the losses of giant magnetostrictive materials (GMMs) are the key parameters for high-power transducer design and performance analysis. Since the GMMs work under pre-stress conditions and their performan...

(This article belongs to the Section E: Engineering and Technology)
  • Review
  • Open Access
22 Citations
8,125 Views
19 Pages

9 February 2022

Two-dimensional (2D) materials are widely used in microelectronic devices due to their excellent optical, electrical, and mechanical properties. The performance and reliability of microelectronic devices based 2D materials are affected by heat dissip...

(This article belongs to the Special Issue Energy Transport at the Micro/Nanoscale)
  • Article
  • Open Access
20 Citations
4,133 Views
19 Pages

A Mixed Numerical-Experimental Method to Characterize Metal-Polymer Interfaces for Crash Applications

  • Jonas Richter,
  • Moritz Kuhtz,
  • Andreas Hornig,
  • Mohamed Harhash and ,
  • Heinz Palkowski and
  • Maik Gude
  • + 1 author+ 0 author

18 May 2021

Metallic (M) and polymer (P) materials as layered hybrid metal-polymer-metal (MPM) sandwiches offer a wide range of applications by combining the advantages of both material classes. The interfaces between the materials have a considerable impact on...

  • Feature Paper
  • Review
  • Open Access
51 Citations
9,954 Views
30 Pages

Numerical Characterization of Piezoceramics Using Resonance Curves

  • Nicolás Pérez,
  • Flávio Buiochi,
  • Marco Aurélio Brizzotti Andrade and
  • Julio Cezar Adamowski

27 January 2016

Piezoelectric materials characterization is a challenging problem involving physical concepts, electrical and mechanical measurements and numerical optimization techniques. Piezoelectric ceramics such as Lead Zirconate Titanate (PZT) belong to the 6...

(This article belongs to the Special Issue Piezoelectric Materials)
  • Article
  • Open Access
23 Citations
3,592 Views
16 Pages

12 November 2022

An elastomeric class of flexible skin-based polymorphing wings changes its configuration to maximize performance at radically different flight conditions. One of the key design challenges for such an aircraft technology is the multiaxial deformation...

(This article belongs to the Section Smart and Functional Polymers)
  • Review
  • Open Access
32 Citations
7,477 Views
23 Pages

Design, Fabrication, and Characterization of New Materials Based on Zirconia Doped with Mixed Rare Earth Oxides: Review and First Experimental Results

  • Adrian Mihail Motoc,
  • Sorina Valsan,
  • Anca Elena Slobozeanu,
  • Mircea Corban and ,
  • Daniele Valerini,
  • Mythili Prakasam,
  • Mihail Botan,
  • Valentin Dragut,
  • Bogdan St. Vasile and
  • Robert Radu Piticescu
  • + 8 authors+ 3 authors

3 June 2020

Monazite is one of the most valuable natural resources for rare earth oxides (REOs) used as dopants with high added value in ceramic materials for extreme environments applications. The complexity of the separation process in individual REOs, due to...

(This article belongs to the Special Issue Metal Oxides)
  • Article
  • Open Access
8 Citations
3,783 Views
23 Pages

Experimental Characterization of Screw-Extruded Carbon Fibre-Reinforced Polyamide: Design for Aeronautical Mould Preforms with Multiphysics Computational Guidance

  • Juan Carlos Antolin-Urbaneja,
  • Haritz Vallejo Artola,
  • Eduard Bellvert Rios,
  • Jorge Gayoso Lopez and ,
  • Jose Ignacio Hernández Vicente and
  • Ana Isabel Luengo Pizarro
  • + 1 author+ 0 author

In this research work, the suitability of short carbon fibre-reinforced polyamide 6 in pellet form for printing an aeronautical mould preform with specific thermomechanical requirements is investigated. This research study is based on an extensive ex...

(This article belongs to the Topic Advanced Composites Manufacturing and Plastics Processing)

of 88