Skip to Content

478 Results Found

  • Article
  • Open Access
26 Citations
4,147 Views
11 Pages

Study on ε-CL-20 Coated with a Wax/F2311 Double-Layer Composite Structure

  • Wei Wang,
  • Liping Shi,
  • Chengcheng Wu,
  • Qi Pan and ,
  • Hua Fang,
  • Jianwei Jiang and
  • Xueyong Guo
  • + 2 authors+ 0 author

29 March 2022

In order to reduce the mechanical sensitivity of ε-CL-20, wax and fluororubber polymers were used as coating materials and desensitizers to coat ε-CL-20 by the water suspension method. Through molecular dynamics calculations, fluorine...

(This article belongs to the Section Surface Engineering for Energy Harvesting, Conversion, and Storage)
  • Article
  • Open Access
15 Citations
2,435 Views
17 Pages

24 October 2022

The phenomenon of structural destabilization damage to asphalt pavement is becoming increasingly serious as a result of high temperatures and heavy traffic. Considering the advantages of Qingchuan rock asphalt (QRA) in its durability, high-temperatur...

  • Article
  • Open Access
3 Citations
2,426 Views
14 Pages

29 March 2023

As a multifunctional material, TiO2 shows excellent performance in catalytic degradation and lithium-ion storage. However, high electron-hole pair recombination, poor conductivity, and low theoretical capacity severely limit the practical application...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Review
  • Open Access
90 Citations
7,713 Views
31 Pages

Regulation of Structure and Anion-Exchange Performance of Layered Double Hydroxide: Function of the Metal Cation Composition of a Brucite-like Layer

  • Luwen Tang,
  • Xiangli Xie,
  • Cunjun Li,
  • Yanqi Xu and ,
  • Wenfeng Zhu and
  • Linjiang Wang
  • + 1 author+ 0 author

11 November 2022

As anion-exchange materials, layered double hydroxides (LDHs) have attracted increasing attention in the fields of selective adsorption and separation, controlled drug release, and environmental remediation. The metal cation composition of the lamina...

(This article belongs to the Section Advanced Nanomaterials and Nanotechnology)
  • Article
  • Open Access
8 Citations
3,768 Views
18 Pages

Intrinsic Properties of Composite Double Layer Grid Superstructures

  • Shahrokh Maalek,
  • Reza Maalek and
  • Bahareh Maalek

This paper examined the opportunities of composite double-layer grid superstructures in short-to-medium span bridge decks. It was empirically shown here that a double-layer grid deck system in composite action with a thin layer of two−way reinf...

  • Article
  • Open Access
10 Citations
3,480 Views
15 Pages

16 October 2020

Core-shell Zinc Oxide/Layered Double Hydroxide (ZnO@LDH) composite nanomaterials have been produced by a one-step continuous hydrothermal synthesis process, in an attempt to further enhance the application potential of layered double hydroxide (LDH)...

(This article belongs to the Section Nanocomposite Materials)
  • Article
  • Open Access
5 Citations
4,059 Views
22 Pages

5 September 2023

This paper examines some of the largely neglected areas of opportunity to utilize skeletal space structure systems in support of the modular, industrialized, economical, sustainable, and digital future of the construction industry. In this context, t...

  • Article
  • Open Access
16 Citations
4,471 Views
14 Pages

18 December 2018

In this study, 11 kinds of composite material were prepared, and the compression behavior of a bi-directional corrugated lattice sandwich structure prepared using jute fiber and epoxy resin was explored. The factors affecting the mechanical behavior...

  • Article
  • Open Access
5 Citations
864 Views
27 Pages

Study on the Flexural Performance of Composite Wall Panels with Ceramsite Foam Concrete and Normal Concrete

  • Chongming Gao,
  • Zhenbao Li,
  • Hua Ma,
  • Muhan Li and ,
  • Nannan Shi and
  • Suen Tian
  • + 1 author+ 0 author

26 December 2025

Traditional exterior walls are heavy, offer insufficient insulation, and have poor durability, making it challenging to meet the combined requirements of energy efficiency and structural enclosure performance. To address the issues of excessive weigh...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
9 Citations
2,189 Views
22 Pages

Hardness and Wettability Characteristics of Electrolytically Produced Copper Composite Coatings Reinforced with Layered Double Oxide (Fe/Al LDO) Nanoparticles

  • Samah Sasi Maoloud Mohamed,
  • Nebojša D. Nikolić,
  • Marija M. Vuksanović,
  • Rastko Vasilić and ,
  • Dana G. Vasiljević-Radović,
  • Radmila M. Jančić Heinneman,
  • Aleksandar D. Marinković and
  • Ivana O. Mladenović
  • + 3 authors+ 0 author

11 June 2024

The lab-made ferrite-aluminium layered double oxide (Fe/Al LDO) nanoparticles were used as reinforcement in the production of copper matrix composite coatings via the electrodeposition route in this study. The Cu coatings electrodeposited galvanostat...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
8 Citations
4,570 Views
15 Pages

Crystal Structure of Hydrotalcite Group Mineral—Desautelsite, Mg6MnIII2(OH)16(CO3)·4H2O, and Relationship between Cation Size and In-Plane Unit Cell Parameter

  • Elena S. Zhitova,
  • Rezeda M. Sheveleva,
  • Anatoly V. Kasatkin,
  • Andrey A. Zolotarev and ,
  • Vladimir N. Bocharov,
  • Anastasia N. Kupchinenko and
  • Dmitry I. Belakovsky
  • + 2 authors+ 0 author

5 May 2023

The crystal structure of a naturally occurring layered double hydroxide mineral—desautelsite from San Benito County, California, USA—was refined using single-crystal X-ray diffraction data in the space group R-3m, a = 3.1238(2) Å, c...

(This article belongs to the Special Issue Symmetry in Inorganic Crystallography and Mineralogy)
  • Article
  • Open Access
2 Citations
1,265 Views
22 Pages

Exploring the Impact of Inter-Layer Structure on Glass Fiber-Poplar Composite Board: Mechanical and Thermal Properties Analysis

  • Jiong Zhang,
  • Shurui Liu,
  • Jinpeng Li,
  • Jixuan Wang and ,
  • Haoyu Bai,
  • Peng Wei and
  • Tian Liu
  • + 2 authors+ 0 author

11 July 2025

This study presents the design and fabrication of a glass fiber–poplar veneer composite plate, investigating how varying interlayer configurations of glass fiber (single- and double-layer) and the arrangement of poplar veneer layers (odd and ev...

(This article belongs to the Special Issue On the Residual Strength and Damage Identification of Damaged Composite Structure)
  • Article
  • Open Access
4 Citations
2,167 Views
14 Pages

Microstructure and Properties of Ni3N Composite Films on Ni-Based Nanosheets by Magnetron Sputtering

  • Chenxi Yan,
  • Feng Guo,
  • Huisheng Cai,
  • Liang Liu and ,
  • Yuguang Li,
  • Yu Kang and
  • Zhiwei Dou
  • + 2 authors+ 0 author

7 February 2025

Single-layered Ni/Ni3N, inter-layered Ni/Ni3N/Ni, and double-layered Ni/Ni3N composite films were produced on an AZ31 magnesium alloy substrate through a magnetron sputtering technique, utilizing precise control over the N2 flow’s modulation. A...

  • Article
  • Open Access
3 Citations
716 Views
20 Pages

Performance Testing and Evaluation of Double-Layer Pervious Concrete Based on Recycled Aggregates

  • Wencan Jiao,
  • Zhengyang Peng,
  • Bin Ma,
  • Chunyu Dai and ,
  • Bin Gong and
  • Zhen Huang
  • + 1 author+ 0 author

11 March 2026

A double-layer pervious concrete composite structure incorporating recycled fine aggregates derived from construction waste was developed to advance ecological slope protection performance. Single-factor experimental investigations on single-layer pe...

  • Article
  • Open Access
9 Citations
2,607 Views
15 Pages

Interlaminar Shear Characteristics of Typical Polyurethane Mixture Pavement

  • Guohua Gao,
  • Min Sun,
  • Chuanchang Xu,
  • Guangzhen Qu and
  • Yaohui Yang

13 September 2022

Polyurethane (PU) can be used as a road material binder, and its mechanical properties, durability, temperature stability, and other road performance metrics are good. However, the interlayer bonding between PU mixtures and asphalt mixtures is poor....

(This article belongs to the Special Issue Advances in Polymer-Reinforced and Fibre-Reinforced Concrete)
  • Article
  • Open Access
32 Citations
6,240 Views
11 Pages

Microfluidics-Based Fabrication of Cell-Laden Hydrogel Microfibers for Potential Applications in Tissue Engineering

  • Gen Wang,
  • Luanluan Jia,
  • Fengxuan Han,
  • Jiayuan Wang and ,
  • Li Yu,
  • Yingkang Yu,
  • Gareth Turnbull,
  • Mingyu Guo,
  • Wenmiao Shu and
  • Bin Li
  • + 5 authors+ 0 author

25 April 2019

Fibrous hydrogel scaffolds have recently attracted increasing attention for tissue engineering applications. While a number of approaches have been proposed for fabricating microfibers, it remains difficult for current methods to produce materials th...

(This article belongs to the Special Issue Supramolecular Gel)
  • Article
  • Open Access
5 Citations
3,462 Views
25 Pages

Composite Fiber Wrapping Techniques for Enhanced Concrete Mechanics

  • Zhongxu Li,
  • Guojun Hao,
  • Haoran Du,
  • Tianjian Fu and ,
  • Depei Liu,
  • Yuxiang Huang and
  • Yongcheng Ji
  • + 2 authors+ 0 author

5 October 2024

This study systematically investigates the enhancement effects of different fiber-reinforced polymer (FRP) materials on the axial compressive performance of concrete. Through experimental evaluations of single-layer, double-layer, and composite FRP r...

(This article belongs to the Special Issue Fiber Reinforced Polymers Applications as Reinforcement of Concrete Structures—Design Aspects, Tests and Analysis)
  • Article
  • Open Access
10 Citations
1,773 Views
14 Pages

20 August 2024

The insulation of high-voltage direct-current (HVDC) cables experiences a short period of voltage polarity reversal when the power flow is adjusted, leading to sever field distortion in this situation. Consequently, improving the insulation performan...

(This article belongs to the Section Polymer Analysis and Characterization)
  • Article
  • Open Access
51 Citations
4,643 Views
15 Pages

The use of porous three-dimensional (3D) composite scaffolds has attracted great attention in bone tissue engineering applications because they closely simulate the major features of the natural extracellular matrix (ECM) of bone. This study aimed to...

(This article belongs to the Section Macromolecules)
  • Article
  • Open Access
4 Citations
4,928 Views
12 Pages

The compressor is the primary source of noise in a refrigeration system. Most compressors are wrapped with multi-layer sound insulation cotton for noise reduction and sound insulation. We explore the sound insulation law of different polyvinyl chlori...

(This article belongs to the Special Issue Characterization and Modelling of Composites, Volume III)
  • Article
  • Open Access
3 Citations
992 Views
17 Pages

Study on Mechanical Response and Structural Combination Design of Steel Bridge Deck Pavement Based on Multi-Scale Finite Element Simulation

  • Jiping Wang,
  • Jiaqi Tang,
  • Tianshu Huang,
  • Zhenqiang Han and ,
  • Zhiyou Zeng and
  • Haitao Ge
  • + 1 author+ 0 author

23 January 2026

Steel bridge deck pavements (SBDPs) are susceptible to complex mechanical and service environmental conditions, yet current design methods often struggle to simultaneously capture global bridge system behavior and local pavement responses. To address...

(This article belongs to the Special Issue Advances in Sustainable Construction Materials, Third Edition)
  • Feature Paper
  • Article
  • Open Access
1,087 Views
12 Pages

Low Temperature Effect of Resistance Strain Gauge Based on Double-Layer Composite Film

  • Mengqiu Li,
  • Zhiyuan Hu,
  • Fengming Ye,
  • Jiaxiang Wang and
  • Zhuoqing Yang

15 January 2026

Strain gauges play a crucial role in numerous fields such as bridge and building structural health monitoring. However, traditional strain gauges generate spurious signals due to the temperature effect, which in turn affects their measurement accurac...

(This article belongs to the Special Issue Structural Analyses and Designs for Flexible/Stretchable Electronics, 3rd Edition)
  • Article
  • Open Access
4 Citations
4,311 Views
17 Pages

2 May 2022

In this study, we fabricated high-performance polyethylene composites by constructing SiO2@silane coupling agent (γ-methylacryloxypropyl trimethoxysilane) and SiO2@polydopamine (PDA) double-layer structures on a magnesium oxysulfate whisker sur...

  • Article
  • Open Access
13 Citations
3,505 Views
21 Pages

Preparation of SA–PA–LA/EG/CF CPCM and Its Application in Battery Thermal Management

  • Ziqiang Liu,
  • Juhua Huang,
  • Ming Cao,
  • Yafang Zhang and ,
  • Jin Hu and
  • Qiang Chen
  • + 1 author+ 0 author

24 July 2021

To improve the heat dissipation efficiency of batteries, the eutectic mass ratios of each component in the ternary low-melting phase change material (PCM), consisting of stearic acid (SA), palmitic acid (PA), and lauric acid (LA), was explored in thi...

  • Article
  • Open Access
10 Citations
3,589 Views
9 Pages

Layered Antibiofouling Composite Membrane for Quenching Bacterial Signaling

  • Kibaek Lee,
  • Syed Salman Ali Shah,
  • Hyeona Park,
  • Chung-Hak Lee and
  • Kwang-Ho Choo

Bacterial quorum quenching (QQ) media with various structures (e.g., bead, cylinder, hollow cylinder, and sheet), which impart biofouling mitigation in membrane bioreactors (MBRs), have been reported. However, there has been a continuous demand for m...

(This article belongs to the Special Issue Honorary Issue for Professor Anthony Fane)
  • Article
  • Open Access
81 Citations
5,475 Views
27 Pages

Investigation of Ion Transport Parameters and Electrochemical Performance of Plasticized Biocompatible Chitosan-Based Proton Conducting Polymer Composite Electrolytes

  • Jihad M. Hadi,
  • Shujahadeen B. Aziz,
  • Salah R. Saeed,
  • Mohamad A. Brza and ,
  • Rebar T. Abdulwahid,
  • Muhamad H. Hamsan,
  • Ranjdar M. Abdullah,
  • Mohd F. Z. Kadir and
  • S. K. Muzakir
  • + 4 authors+ 0 author

21 November 2020

In this study, biopolymer composite electrolytes based on chitosan:ammonium iodide:Zn(II)-complex plasticized with glycerol were successfully prepared using the solution casting technique. Various electrical and electrochemical parameters of the biop...

(This article belongs to the Special Issue Modelling and Experiment of Anion-Exchange Membranes)
  • Article
  • Open Access
5 Citations
3,079 Views
19 Pages

30 August 2020

Long-span prestressed double-layer composite torsional reticulated shells have beautiful shapes, which make them a solution widely applied in public buildings requiring long-span structures, such as airports and stadiums. However, once the progressiv...

  • Article
  • Open Access
27 Citations
5,550 Views
12 Pages

Structural Design and Sound Absorption Properties of Nitrile Butadiene Rubber-Polyurethane Foam Composites with Stratified Structure

  • Xueliang Jiang,
  • Zhijie Wang,
  • Zhen Yang,
  • Fuqing Zhang and ,
  • Feng You and
  • Chu Yao
  • + 1 author+ 0 author

25 August 2018

Sound absorbing composites with stratified structures, including double-layer and sandwich structures, were prepared through the combination of nitrile butadiene rubber (NBR) and polyurethane foam (PUFM). The effects of the thickness ratio of layers,...

  • Article
  • Open Access
13 Citations
3,074 Views
12 Pages

Non-Stacked γ-Fe2O3/C@TiO2 Double-Layer Hollow Nanoparticles for Enhanced Photocatalytic Applications under Visible Light

  • Xun Sun,
  • Xiao Yan,
  • Huijuan Su,
  • Libo Sun and ,
  • Lijun Zhao,
  • Junjie Shi,
  • Zifan Wang,
  • Jianrui Niu,
  • Hengli Qian and
  • Erhong Duan
  • + 5 authors+ 0 author

7 January 2022

Herein, a non-stacked γ-Fe2O3/C@TiO2 double-layer hollow nano photocatalyst has been developed with ultrathin nanosheets-assembled double shells for photodegradation phenol. High catalytic performance was found that the phenol could be complete...

(This article belongs to the Topic Synthesis and Applications of Nanostructured Metals and Metal Oxides)
  • Article
  • Open Access
12 Citations
2,781 Views
18 Pages

15 June 2022

A vibration characteristic analysis model of a laminated composite double cylindrical shell system (LCDCSS) coupled with several annular plates under general boundary conditions is established. Artificial springs are used to simulate the coupling rel...

(This article belongs to the Special Issue Characterisation and Modelling of Manufacturing–Microstructure–Property–Mechanism Relationship for Advanced and Emerging Materials)
  • Article
  • Open Access
16 Citations
4,637 Views
12 Pages

Micro Fracture Behavior of Composite Honeycomb Sandwich Structure

  • Guangjian Bi,
  • Jianping Yin,
  • Zhijun Wang and
  • Zijian Jia

30 December 2020

To study the influence of structure size and composite forms on the mechanical properties of the composite double honeycomb sandwich structure, a composite double honeycomb sandwich structure was initially designed. The dynamic response of a composit...

(This article belongs to the Section Thin Films and Interfaces)
  • Article
  • Open Access
759 Views
18 Pages

18 December 2025

Pipeline steels under cyclic loading in corrosive environments are prone to wear and corrosion–wear synergy. Low-dilution, high-reliability Ni-based Cold Metal Transfer (CMT) overlays are therefore required to ensure structural integrity. In th...

(This article belongs to the Special Issue Effect of Heat Treatment on Structural and Mechanical Properties of Metallic Materials/Coatings)
  • Article
  • Open Access
4 Citations
1,432 Views
19 Pages

4 June 2025

The mechanical limitations of gypsum-based composites necessitate reinforcement strategies to enhance their structural performance. This study investigates the feasibility of integrating 3D-printed polylactic acid (PLA) meshes into gypsum composites...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Review
  • Open Access
118 Citations
10,998 Views
26 Pages

The Effect of Modifications of Activated Carbon Materials on the Capacitive Performance: Surface, Microstructure, and Wettability

  • Kouao Dujearic-Stephane,
  • Meenal Gupta,
  • Ashwani Kumar,
  • Vijay Sharma and ,
  • Soumya Pandit,
  • Patrizia Bocchetta and
  • Yogesh Kumar
  • + 2 authors+ 0 author

26 February 2021

In this review, the efforts done by different research groups to enhance the performance of the electric double-layer capacitors (EDLCs), regarding the effect of the modification of activated carbon structures on the electrochemical properties, are s...

(This article belongs to the Special Issue Feature Papers in Journal of Composites Science in 2021)
  • Feature Paper
  • Article
  • Open Access
28 Citations
3,805 Views
14 Pages

The Effect of Elevated Temperatures on the TRM-to-Masonry Bond: Comparison of Normal Weight and Lightweight Matrices

  • Paraskevi D. Askouni,
  • Catherine (Corina) G. Papanicolaou and
  • Michael I. Kaffetzakis

27 May 2019

Textile Reinforced Mortar (TRM) is a composite material that has already been successfully used as an externally bonded strengthening means of existing structures. The bond of TRM with various substrates is of crucial importance for determining the d...

(This article belongs to the Special Issue Textile Reinforced Cement Composites: New Insights in Structural and Material Engineering)
  • Article
  • Open Access
2 Citations
1,673 Views
11 Pages

Study on Microstructure and Mechanical Properties of Core–Shell-Structured Ti@TixN Reinforced Al Composite Prepared by Pressure Infiltration

  • Yixiao Xia,
  • Zhiyu Sun,
  • Ping Zhu,
  • Juanrui Hu and ,
  • Leilei Hao,
  • Yun Liu,
  • Boyu Ju,
  • Guoqin Chen and
  • Wenshu Yang
  • + 4 authors+ 0 author

7 March 2025

In this research, a nitrogenized shell layer was formed on the surface of Ti powder in a high-temperature N2 environment, resulting in core–shell-structured Ti@TixN powder. Using this as a reinforcement, Ti@TixN/Al composite was successfully de...

(This article belongs to the Section Advanced Composites)
  • Article
  • Open Access
5 Citations
1,807 Views
21 Pages

The double-layered cylindrical shell represents a key structural configuration for underwater vehicles, where its vibration behavior remains a primary concern in engineering design and analysis. This study develops a spectral element method (SEM) for...

(This article belongs to the Section Ocean Engineering)
  • Article
  • Open Access
19 Citations
4,069 Views
11 Pages

14 August 2020

In this paper, the Si-20Cr-20Fe coating was prepared on MoNbTaTiW RHEA by a fused slurry method. The microstructural evolution and compositions of the silicide coating under high-temperature oxidation environment were studied. The results show that t...

  • Article
  • Open Access
3 Citations
2,186 Views
17 Pages

27 May 2025

The structure and composition of the oxide layer on the surface of 316L stainless steel (SS) after exposure to alkaline high-temperature and high-pressure water for 2000 h are characterized using various analytical techniques. The oxide layer has a d...

(This article belongs to the Special Issue Corrosion Behavior of Alloys in Water Environments)
  • Article
  • Open Access
3 Citations
2,043 Views
18 Pages

Analysis of Optimization Weights for Flow Field of Internal Rotation Stabilizer Coupled with Porous Retaining Wall

  • Ziyu Liu,
  • Yan Jin,
  • Feifang Gan,
  • Peng Lin and ,
  • Jingyu Huang and
  • Jun Li
  • + 1 author+ 0 author

29 July 2021

In this paper, the flow field of the approximate T-shaped tundish and the removal rate of fine inclusions are improved by changing the parameters of the flow control device of the SCB (stabilizer coupling baffle) structure. Studies have shown that th...

  • Article
  • Open Access
3 Citations
2,555 Views
14 Pages

11 February 2023

The sharp change of stiffness in the soil–rock combination stratum is the weak point in the seismic design of the pipe jacking structure. To study the seismic response characteristics of vertical double-layer overlapping pipe jacking, based on...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
19 Citations
4,077 Views
12 Pages

Comparison of CrN, AlN and TiN Diffusion Barriers on the Interdiffusion and Oxidation Behaviors of Ni+CrAlYSiN Nanocomposite Coatings

  • Lijuan Zhu,
  • Chun Feng,
  • Shenglong Zhu,
  • Fuhui Wang and ,
  • Juntao Yuan and
  • Peng Wang
  • + 1 author+ 0 author

31 October 2021

CrN, AlN, TiN layer were prepared as diffusion barriers between the K417 substrate and Ni+CrAlYSiN nano composite coatings via vacuum arc evaporation. Oxidation kinetics and microstructure evaluation of these nano coating systems at 1000 °C after 100...

(This article belongs to the Special Issue Nanocrystalline Coating Alloy)
  • Article
  • Open Access
12 Citations
3,293 Views
17 Pages

19 April 2023

To improve the oxidation resistance of Mo-based alloys, a novel (Mo,Hf)Si2-Al2O3 composite coating was fabricated on a Mo-based alloy by the method of slurry sintering. The isothermal oxidation behavior of the coating was evaluated at 1400 °C. Th...

(This article belongs to the Special Issue Advances in Coating Materials Research: From Preparation to Application)
  • Article
  • Open Access
4 Citations
1,922 Views
16 Pages

10 February 2025

In order to investigate the effects of surface combined body (SCB) type and geosynthetic type on the low-temperature cracking resistance of reinforced asphalt mixtures, low-temperature bending damage tests were conducted on both unreinforced and rein...

(This article belongs to the Section Polymer Composites and Nanocomposites)
  • Article
  • Open Access
6 Citations
3,323 Views
11 Pages

Influence of Different Electrolyte Additives and Structural Characteristics of Plasma Electrolytic Oxidation Coatings on AZ31 Magnesium Alloy

  • Zhiquan Huang,
  • Ruiqiang Wang,
  • Xintong Liu,
  • Dongdong Wang and ,
  • Heng Zhang,
  • Xiaojie Shen,
  • Dejiu Shen and
  • Dalong Li
  • + 3 authors+ 0 author

24 August 2020

Coatings prepared by different electrolyte additives were investigated on AZ31 magnesium alloy by plasma electrolytic oxidation. In this study, scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction analysis were emp...

(This article belongs to the Special Issue Corrosion Science and Surface Engineering)
  • Article
  • Open Access
13 Citations
3,035 Views
12 Pages

Layered Perovskites BaM2In2O7 (M = La, Nd): From the Structure to the Ionic (O2−, H+) Conductivity

  • Nataliia Tarasova,
  • Anzhelika Galisheva,
  • Irina Animitsa,
  • Ksenia Belova and ,
  • Anastasia Egorova,
  • Ekaterina Abakumova and
  • Dmitry Medvedev
  • + 2 authors+ 0 author

12 May 2022

The design of new oxide compounds that can be used as oxygen- or proton-conducting electrolytes for solid oxide fuel cells is actively in progress. Despite the intensive research activities regarding electrolytes with perovskite/fluorite structures,...

(This article belongs to the Special Issue Electrochemical Processes, Materials and Devices)
  • Article
  • Open Access
102 Citations
7,280 Views
11 Pages

Nanoporous Iron Oxide/Carbon Composites through In-Situ Deposition of Prussian Blue Nanoparticles on Graphene Oxide Nanosheets and Subsequent Thermal Treatment for Supercapacitor Applications

  • Alowasheeir Azhar,
  • Yusuke Yamauchi,
  • Abeer Enaiet Allah,
  • Zeid A. Alothman and ,
  • Ahmad Yacine Badjah,
  • Mu. Naushad,
  • Mohamed Habila,
  • Saikh Wabaidur,
  • Jie Wang and
  • Mohamed Barakat Zakaria
  • + 5 authors+ 0 author

This work reports the successful preparation of nanoporous iron oxide/carbon composites through the in-situ growth of Prussian blue (PB) nanoparticles on the surface of graphene oxide (GO) nanosheets. The applied thermal treatment allows the conversi...

(This article belongs to the Section Inorganic Materials and Metal-Organic Frameworks)
  • Article
  • Open Access
11 Citations
3,263 Views
14 Pages

25 April 2025

How to solve hydrogen embrittlement (HE) is a key issue that urgently needs to be addressed in the hydrogen energy industry. The use of hydrogen barrier coatings can effectively reduce the occurrence of HE. In this article, we utilized the epoxy resi...

  • Article
  • Open Access
6 Citations
3,164 Views
10 Pages

A Novel Bio-Inspired Ag/3D-TiO2/Si SERS Substrate with Ordered Moth-like Structure

  • Jingguo Yang,
  • Florian Ion Tiberiu Petrescu,
  • Ying Li,
  • Dandan Song and
  • Gang Shi

9 September 2022

This paper reports a novel method to fabricate a bio-inspired SERS substrate with low reflectivity, ultra-sensitivity, excellent uniformity, and recyclability. First, double layers of polystyrene spheres with different particle sizes were assembled o...

(This article belongs to the Special Issue Nanostructured Materials for Energy Applications)
  • Article
  • Open Access
12 Citations
3,705 Views
13 Pages

In order to improve the wear resistance of titanium alloy, a Ti5Si3/Ti3Al composite coating with improved wear resistance was successfully prepared by laser cladding TA2 titanium alloy using the double-layer presetting method of Ti-63 wt.% Al mixed p...

(This article belongs to the Special Issue Laser Surface Engineering for Tribology)

of 10