Skip to Content

2,256 Results Found

  • Article
  • Open Access
11 Citations
3,376 Views
12 Pages

Computational Model for Analysing the Tooth Deflection of Polymer Gears

  • Aljaž Ignatijev,
  • Srečko Glodež and
  • Janez Kramberger

2 March 2024

A computational model for analysing the tooth deflection of polymer gears is presented in this paper. Because polymer gears have less stiffness compared to metal gears, the proposed approach considers a comprehensive analysis to determine the most su...

(This article belongs to the Section Polymer Physics and Theory)
  • Article
  • Open Access
5 Citations
3,348 Views
12 Pages

3 December 2021

This study proposes a method for predicting the deflection of shear-critical reinforced concrete (RC) beams. Shear deterioration of shear-critical RC beams occurs before flexural yielding. After shear deterioration occurs in the shear-critical RC bea...

(This article belongs to the Special Issue Assessment and Retrofitting of Building Structures: Experimental Testing and Modelling)
  • Article
  • Open Access
9 Citations
3,662 Views
16 Pages

Calibration Model Optimization for Strain Metrology of Equal Strength Beams Using Deflection Measurements

  • Yonggang Yan,
  • Zhengxing Wu,
  • Jianjun Cui,
  • Kai Chen and ,
  • Yanhong Tang and
  • Ning Yang
  • + 1 author+ 0 author

13 March 2023

Strain sensors, especially fiber Bragg grating (FBG) sensors, are of great importance in structural health monitoring, mechanical property analysis, and so on. Their metrological accuracy is typically evaluated by equal strength beams. The traditiona...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
4 Citations
3,371 Views
20 Pages

Deflection Estimation Model for Prestressed Concrete Slabs with Plastic Inserts Forming Voids

  • Mindaugas Zavalis,
  • Mykolas Daugevičius,
  • Aidas Jokūbaitis,
  • Robertas Zavalis and
  • Juozas Valivonis

21 April 2022

Developed and patented more than 30 years ago, the system of slabs with plastic inserts has become very popular, and it is used all over the world today due to the significantly reduced cost of building construction. Experimental tests have shown tha...

(This article belongs to the Special Issue Advances in Serviceability Analysis of Concrete Structures)
  • Article
  • Open Access
11 Citations
3,895 Views
10 Pages

11 December 2018

Despite increasing need for friction stir spot welding (FSSW) for high-temperature softening materials, system deflection due to relatively high plunging force remains an obstacle. System deflection results in the vertical position error of a welding...

(This article belongs to the Special Issue Friction Stir Welding and Processing in Alloy Manufacturing)
  • Article
  • Open Access
10 Citations
3,689 Views
26 Pages

A New Analytical Model for Deflection of Concrete Beams Reinforced by BFRP Bars and Steel Fibres under Cyclic Loading

  • Haitang Zhu,
  • Zongze Li,
  • Qun Chen,
  • Shengzhao Cheng and ,
  • Chuanchuan Li and
  • Xiangming Zhou
  • + 1 author+ 0 author

28 April 2022

Basalt-fiber-reinforced plastic-bars-reinforced concrete beams (i.e., BFRP-RC beams) usually possess significant deformations compared to reinforced concrete beams due to the FRP bars having a lower Young’s modulus. This paper investigates the...

(This article belongs to the Special Issue Advances in the Processing and Application of Polymer and Its Composites)
  • Article
  • Open Access
21 Citations
3,463 Views
13 Pages

2 December 2021

A cable-stayed bridge is a typical symmetrical structure, and symmetry affects the deformation characteristics of such bridges. The main girder of a cable-stayed bridge will produce obvious deflection under the inducement of temperature. The regressi...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
444 Views
28 Pages

17 June 2026

Geopolymeric concrete beams are gaining increasing attention as sustainable structural members. The paper presents an experimental investigation on the deflection and cracking behavior of geopolymeric recycled aggregate concrete (GRAC) beams, with em...

(This article belongs to the Special Issue Mechanical Properties and Durability of Concrete Materials and Structures)
  • Article
  • Open Access
3 Citations
2,365 Views
25 Pages

Digital Model of Deflection of a Cable-Stayed Bridge Driven by Deep Learning and Big Data Optimized via PCA-LGBM

  • Zili Xia,
  • Junxiao Guo,
  • Zixiang Yue,
  • Youliang Ding and ,
  • Zhiwen Wang and
  • Shouwang Sun
  • + 1 author+ 0 author

15 June 2023

Based on big data, we can build a regression model between a temperature field and a temperature-induced deflection to provide a control group representing the service performance of bridges, which has a positive effect on the full life cycle mainten...

(This article belongs to the Special Issue Artificial Intelligence (AI) in Structural Health Monitoring)
  • Article
  • Open Access
2,218 Views
25 Pages

14 January 2025

To predict the mid-span deflection and crack width of reinforced ultra-high-performance concrete (R-UHPC) shallow T-shaped beams, a simplified analysis model comprising a bilinear curve with several characterization points is proposed in this paper....

(This article belongs to the Special Issue Research on Structural Analysis and Design of Civil Structures)
  • Article
  • Open Access
1,849 Views
18 Pages

A Unified Deflection Theory Model for Multi-Tower Self-Anchored Suspension Bridges with Different Tower–Girder and Cable–Girder Connections

  • Shiyu Guan,
  • Dinghui Liao,
  • Yi Zhang,
  • Jun Shi and ,
  • Shuang Liu and
  • Hongyou Cao
  • + 1 author+ 0 author

11 December 2024

This study presents a unified analytical model for multi-tower self-anchored suspension bridges integrating tower–girder connections (TGCs) and cable–girder connections (CGCs) within the framework of deflection theory. The connections are...

(This article belongs to the Special Issue Structural Health Monitoring and Intelligent Operation Maintenance of Concrete and Steel Structures)
  • Article
  • Open Access
868 Views
23 Pages

7 May 2026

This research utilizes Laser Doppler Vibrometer (LDV) technology to measure pavement deflection velocity under heavy moving loads at the Virginia DOT Accelerated Pavement Testing (VDOT APT) facility. While LDVs are typically integrated into Traffic S...

(This article belongs to the Section Transportation and Future Mobility)
  • Article
  • Open Access
2 Citations
2,464 Views
13 Pages

2 October 2023

The deformation of concrete-face rockfill dams (CFRDs) is a key parameter for the safety control of reservoir and dam systems. Rapid and accurate estimation of the deformation characteristics of CFRDs is a top priority. To realize this, we proposed a...

(This article belongs to the Topic Artificial Intelligence (AI) Applied in Civil Engineering, 2nd Volume)
  • Article
  • Open Access
47 Citations
11,313 Views
10 Pages

17 June 2017

In micro-milling, cutting forces generate non-negligible tool deflection, which has a significant influence on the machining process and on workpiece accuracy. This paper investigates the tool deflection during micro-milling and its effect on cutting...

(This article belongs to the Special Issue State-Of-The-Art Micromachining)
  • Article
  • Open Access
5 Citations
2,914 Views
12 Pages

Modelling the Interaction between a Laterally Deflected Car Tyre and a Road Surface

  • Algirdas Maknickas,
  • Oleg Ardatov,
  • Marijonas Bogdevičius and
  • Rimantas Kačianauskas

8 November 2022

The interaction between a deflected car tyre and a road surface was modelled under normal and overloaded conditions. The model incorporates the detailed geometry of the car wheel, including a metallic rim reinforcement, a hyper-elastic composite tyre...

(This article belongs to the Topic Intelligent Transportation Systems)
  • Article
  • Open Access
15 Citations
2,650 Views
23 Pages

Deflection Predictions of Tapered Cellular Steel Beams Using Analytical Models and an Artificial Neural Network

  • Amine Osmani,
  • Rabee Shamass,
  • Konstantinos Daniel Tsavdaridis,
  • Felipe Piana Vendramell Ferreira and
  • Abdelwahhab Khatir

Cellular steel beams are primarily used to accommodate electrical and mechanical services within their structural depth, helping to reduce the floor-to-ceiling height in buildings. These beams are often tapered for various reasons, such as connecting...

(This article belongs to the Section Building Structures)
  • Review
  • Open Access
20 Citations
5,490 Views
14 Pages

A Review on Analytical Modeling for Collapse Mode Capacitive Micromachined Ultrasonic Transducer of the Collapse Voltage and the Static Membrane Deflections

  • JiuJiang Wang,
  • Xin Liu,
  • YuanYu Yu,
  • Yao Li and ,
  • ChingHsiang Cheng,
  • Shuang Zhang,
  • PengUn Mak,
  • MangI Vai and
  • SioHang Pun
  • + 4 authors+ 0 author

18 June 2021

Analytical modeling of capacitive micromachined ultrasonic transducer (CMUT) is one of the commonly used modeling methods and has the advantages of intuitive understanding of the physics of CMUTs and convergent when modeling of collapse mode CMUT. Th...

(This article belongs to the Section E: Engineering and Technology)
  • Article
  • Open Access
18 Citations
2,365 Views
17 Pages

Early Warning for Continuous Rigid Frame Bridges Based on Nonlinear Modeling for Temperature-Induced Deflection

  • Liangwei Jiang,
  • Hongyin Yang,
  • Weijun Liu,
  • Zhongtao Ye and ,
  • Junwen Pei,
  • Zhangjun Liu and
  • Jianfeng Fan
  • + 2 authors+ 0 author

2 June 2024

Bridge early warning based on structural health monitoring (SHM) system is of significant importance for ensuring bridge safe operation. The temperature-induced deflection (TID) is a sensitive indicator for performance degradation of continuous rigid...

(This article belongs to the Section Fault Diagnosis & Sensors)
  • Article
  • Open Access
18 Citations
3,189 Views
33 Pages

28 June 2023

Reinforced concrete (RC) is the result of a combination of steel reinforcing rods (which have high tensile) and concrete (which has high compressive strength). Additionally, the prediction of long-term deformations of RC flexural structures and the m...

(This article belongs to the Special Issue Impact Behaviour of Materials and Structures)
  • Article
  • Open Access
5 Citations
1,528 Views
20 Pages

22 June 2025

As an important part of national transportation infrastructure, the operation status of bridges is directly related to transportation safety and social stability. Structural deflection, which reflects the deformation behavior of bridge systems, serve...

(This article belongs to the Section Construction Management, and Computers & Digitization)
  • Article
  • Open Access
11 Citations
4,981 Views
21 Pages

28 August 2023

Numerical modeling approaches are favored for performing long-term analyses of continuous prestressed concrete rigid-frame (CPCR) bridges due to the complexity and high cost of experimental testing on such structures. In this study, a refined numeric...

(This article belongs to the Special Issue Bridge Structural Analysis)
  • Article
  • Open Access
19 Citations
8,545 Views
14 Pages

25 July 2012

A novel three-point method using a grating eddy current absolute position sensor (GECS) for bridge deflection estimation is proposed in this paper. Real spatial positions of the measuring points along the span axis are directly used as relative refer...

(This article belongs to the Section Physical Sensors)
  • Article
  • Open Access
13 Citations
7,363 Views
12 Pages

A Direct Georeferencing Method for Terrestrial Laser Scanning Using GNSS Data and the Vertical Deflection from Global Earth Gravity Models

  • Edward Osada,
  • Krzysztof Sośnica,
  • Andrzej Borkowski,
  • Magdalena Owczarek-Wesołowska and
  • Anna Gromczak

24 June 2017

Terrestrial laser scanning is an efficient technique in providing highly accurate point clouds for various geoscience applications. The point clouds have to be transformed to a well-defined reference frame, such as the global Geodetic Reference Syste...

(This article belongs to the Section Remote Sensors)
  • Article
  • Open Access
1 Citations
1,578 Views
14 Pages

14 March 2025

Advances in material science and intelligent systems have led to an increasing use of large-deflection flexible structures in the aerospace industry, including flexible-wall wind tunnel nozzles, deformable wings, and variable nozzles for aircraft eng...

(This article belongs to the Special Issue Ultra-Precision Machining Technology and Equipments)
  • Article
  • Open Access
19 Citations
4,316 Views
24 Pages

Gear Teeth Deflection Model for Spur Gears: Proposal of a 3D Nonlinear and Non-Hertzian Approach

  • Fabio Bruzzone,
  • Tommaso Maggi,
  • Claudio Marcellini and
  • Carlo Rosso

30 September 2021

In this paper, a three-dimensional model for the estimation of the deflections, load sharing attributes, and contact conditions will be presented for pairs of meshing teeth in a spur gear transmission. A nonlinear iterative approach based on a semi-a...

(This article belongs to the Section Machine Design and Theory)
  • Article
  • Open Access
9,409 Views
26 Pages

20 June 2025

This study proposes a unified span–depth ratio model aimed at optimizing the minimum thickness of reinforced concrete flat plate slabs, addressing the limitations of the simplified span-to-depth ratio provisions in ACI 318. The existing code do...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
1 Citations
1,849 Views
19 Pages

23 September 2024

Insulating glass units (IGUs) are the most common filling for external building envelopes. These elements have many advantages related to the thermal protection of buildings. However, some climatic loads are generated or modified due to the sealed ga...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
3 Citations
3,039 Views
28 Pages

Deflection Analysis of a Nonlocal Euler–Bernoulli Nanobeam Model Resting on Two Elastic Foundations: A Generalized Differential Quadrature Approach

  • Ramzy M. Abumandour,
  • Mohammed A. El-Shorbagy,
  • Islam M. Eldesoky,
  • Mohamed H. Kamel and ,
  • Hammad Alotaibi and
  • Ahmed L. Felila
  • + 1 author+ 0 author

7 November 2022

This paper provides a general formularization of the nonlocal Euler–Bernoulli nanobeam model for a bending examination of the symmetric and asymmetric cross-sectional area of a nanobeam resting over two linear elastic foundations under the effe...

(This article belongs to the Special Issue Symmetry in Nonlinear Optics: Topics and Advances)
  • Article
  • Open Access
5 Citations
2,869 Views
13 Pages

9 January 2020

This paper presents a penalty-based sliding mode control (SMC) law for flexible bar system, which uses shape memory alloy (SMA) as actuator. SMA actuators are lightweight, compact and flexible which facilitate their integration into flexible structur...

  • Article
  • Open Access
2 Citations
2,577 Views
22 Pages

25 April 2023

For the problem of cable damage identification in cable-stayed bridges, we have presented a method for identifying cable damage based on deflection monitoring data from a small number of measurement points. We first describe the method to reduce the...

  • Article
  • Open Access
6 Citations
19,467 Views
20 Pages

1 February 2019

The maneuverability of the Sukhoi Su-30 at very high angles of attack (AoA) was remarkably appealing. Canard angle, in cooperation with aircraft wing, created a flow pattern whereby, in that position, the fighter still had as much lifting force as po...

  • Article
  • Open Access
17 Citations
4,419 Views
17 Pages

2 July 2019

To prevent serious shaft deflection disasters under asymmetric mining conditions, it is urgent to solve the problem of designing shaft protection rock pillar (SPRP) sizes in thick soil and thin rock strata. In this paper, based on the parallel mining...

(This article belongs to the Special Issue Green Coal Mining Techniques)
  • Article
  • Open Access
1 Citations
796 Views
44 Pages

Stress and Strain Analysis in the Absorber Tube of a Parabolic Trough Solar Collector for Direct Steam Generation

  • Guillermo Farfán,
  • Sara L. Moya,
  • Roger Cundapí,
  • Oscar Zagal and
  • Andrés Blanco-Ortega

25 February 2026

Direct steam generation in parabolic trough collectors presents challenges due to the non-uniform distribution of heat flux and the appearance of flow patterns. These conditions can induce stresses, deformations, and deflections that compromise the s...

(This article belongs to the Special Issue Thermal Engineering: Energy Conversion, Numerical Simulation, and Advanced Control)
  • Article
  • Open Access
1 Citations
559 Views
26 Pages

Study on the Influence Factors of the Servo Steel Strut of Foundation Pit on Deflection Correction of Adjacent Shield Tunnel

  • Gang Wei,
  • Weihao Feng,
  • Zhe Wang,
  • Pengfei Wu and ,
  • Xuehua Wu,
  • Kuan Chang,
  • Donglai Jiang and
  • Yebo Zhou
  • + 3 authors+ 0 author

12 April 2026

The deep foundation pit excavation of subway will cause horizontal displacement, uneven settlement and other adverse effects on the adjacent shield. The use of servo steel strut has a certain effect on deflection correction, but the current understan...

(This article belongs to the Section F: Engineering and Materials)
  • Article
  • Open Access
2 Citations
1,109 Views
28 Pages

24 November 2025

Defects in pipes adversely affect both the jacking construction process and long-term operational safety, yet their specific impacts on mechanical properties remain unclear. This study investigates pipe jacking segments under deflection, using the Ch...

  • Article
  • Open Access
2 Citations
1,501 Views
33 Pages

24 June 2024

Coal mining under the Quaternary thick loose layer affects key strata breakage, Bed-separations development, ground subsidence, and other studies. This paper presents a method for solving the deflection of a large-deflection inclined thin plate under...

(This article belongs to the Topic Physical Monitoring and Healthy Controlling of Geotechnical Engineering)
  • Article
  • Open Access
2,780 Views
28 Pages

12 November 2022

The design guidelines available in building codes for steel and fibre reinforced polymer (FRP) reinforced concrete (RC) beams have been developed on the basis of empirical models. While these models are successfully used for practical purposes, they...

(This article belongs to the Section Building Materials, and Repair & Renovation)
  • Article
  • Open Access
19 Citations
5,097 Views
29 Pages

18 February 2019

Structural health monitoring (SHM) has been widely used in all kinds of bridges. It is significant to accurately assess the serviceability and reliability of bridge subjected to severe conditions by SHM technique. Bridge deflection as an essential ev...

(This article belongs to the Special Issue Sensor Applications on Built Environment)
  • Article
  • Open Access
5 Citations
3,690 Views
15 Pages

Analysis on Deflection of Projectile Penetrating into Composite Concrete Targets

  • Yingxiang Wu,
  • Xigui Tao,
  • Yan Liu,
  • Qingming Zhang and
  • Yijiang Xue

8 November 2022

From an offensive point of view, increasing the impact velocity of the projectile is an effective way to enlarge its penetration depth. However, as the projectile penetrates the target, there often exists an angle of attack, the resultant force on th...

  • Article
  • Open Access
780 Views
23 Pages

17 March 2026

To address the inherent inaccuracies of the classical beam theory (which overestimates the flexural stiffness) and the “quasi-plane section method” (which neglects the shear deformation) in the deflection analysis of steel truss web&ndash...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
4 Citations
2,896 Views
13 Pages

16 December 2022

The preponderance of laser beam shapes cannot be ruled out during the implementation of an optical experiment nor during the formulation of its theoretical background. The present work elucidates the role of Gaussian and top-hat beam shapes in genera...

(This article belongs to the Special Issue Adaptive Optics and Its Applications)
  • Article
  • Open Access
2 Citations
3,284 Views
18 Pages

14 March 2022

Typhoon Fitow (2013) took an unusual westward track deflection after a lengthy northward movement over the western North Pacific (WNP). Based on observation and wave analysis, it is found that the track deflection of Fitow is attributed to the transi...

(This article belongs to the Section Meteorology)
  • Article
  • Open Access
1 Citations
2,943 Views
15 Pages

4 July 2022

Quantitative characterization of propagation behaviors and morphology of hydraulic fractures is crucial for controlling and optimizing hydrofracturing effects. To study the disturbance deflection behaviors of multiple hydraulic fractures, a three-dim...

(This article belongs to the Special Issue Failure and Multiphysical Fields in Geo-Energy)
  • Article
  • Open Access
446 Views
26 Pages

Construction and Parameter Identification of Two-Dimensional Coupled Fractional-Order Dynamic Model for LCOPA

  • Mingkan Ta,
  • Chunyang Wang,
  • Xuelian Liu,
  • Jinyang Yu and ,
  • Jiliang Jin and
  • Da Xie
  • + 1 author+ 0 author

Aiming at the limitation that the traditional integer-order dynamic model of a liquid crystal optical phased array (LCOPA) cannot simultaneously characterize the liquid crystal deformation memory effect, cross-coupling of two-dimensional deflection c...

(This article belongs to the Special Issue Fractional Dynamics Systems: Modeling, Forecasting, and Control)
  • Article
  • Open Access
14 Citations
3,286 Views
29 Pages

Flow Characteristics of the Rip Current System near a Shore-Normal Structure with Regular Waves

  • Jie Xu,
  • Sheng Yan,
  • Zhili Zou,
  • Chengshu Chang and ,
  • Kezhao Fang and
  • Yan Wang
  • + 1 author+ 0 author

Rip currents are the strong narrow seaward current produced by waves breaking on the coast. Of the many types of rip currents, the present study investigates, experimentally and numerically, the rip current system produced by the wave reflection on a...

(This article belongs to the Section Coastal Engineering)
  • Article
  • Open Access
1 Citations
3,118 Views
29 Pages

Horizontally curved steel I-beams exhibit a complicated mechanical response as they experience a combination of bending, shear, and torsion, which varies based on the geometry of the beam at hand. The behaviour of these beams is therefore quite diffi...

(This article belongs to the Special Issue Computational Methods in Structural Engineering)
  • Proceeding Paper
  • Open Access
2 Citations
1,534 Views
7 Pages

This study performs a sensitivity analysis of strong cyclone track deflection over isolated topography, exploring the impacts of vortex impinging direction and strength. A dynamic model investigates track adjustments of cyclonic vortices on a β-...

(This article belongs to the Proceedings of The 6th International Electronic Conference on Atmospheric Sciences)
  • Article
  • Open Access
6 Citations
2,454 Views
16 Pages

1 December 2023

This study employs the phase-field regularized cohesion model (PF-CZM) to simulate crack propagation and damage behavior in porous granite. The impact of the pore radius (r), initial crack–pore distance (D), and pore–crack angle (θ)...

(This article belongs to the Special Issue Fracture Mechanics and Phase Field Approaches in Engineering Materials)
  • Article
  • Open Access
13 Citations
4,453 Views
26 Pages

9 May 2022

Bending deformation gives rise to interwire slippage for spiral strands subjected to multi-axial loads, and further induces wear or fatigue phenomena in practice. The interwire friction would resist bending deformation and lead to uneven tension dist...

(This article belongs to the Topic Processing, Analysis, Modelling and Mechanics of Materials and Structures)
  • Article
  • Open Access
494 Views
19 Pages

18 June 2026

To investigate the non-uniform gas–solid flow and insufficient particle residence time in an Ende pressurized pulverized-coal gasifier (EPCG), a three-dimensional cold-state numerical model of a 45,000 Nm3/h industrial-scale gasifier was establ...

(This article belongs to the Section Particle Processes)

of 46