- Article
In this report, we present several results in the theory of
In this report, we present several results in the theory of
Recently, a new blind adaptive deconvolution algorithm was proposed based on a new closed-form approximated expression for the conditional expectation (the expectation of the source input given the equalized or deconvolutional output) where the outpu...
In the literature, we can find several blind adaptive deconvolution algorithms based on closed-form approximated expressions for the conditional expectation (the expectation of the source input given the equalized or deconvolutional output), involvin...
When using traditional Euler deconvolution optimization strategies, it is difficult to distinguish between anomalies and their corresponding Euler tails (those solutions are often distributed outside the anomaly source, forming “tail”-sha...
In a blind adaptive deconvolution problem, the convolutional noise observed at the output of the deconvolution process, in addition to the required source signal, is—according to the literature—assumed to be a Gaussian process when the de...
In this paper, a reliability assessment and prediction method based on bearing vibration signals is proposed, which combines Adaptive Cyclostationary Blind Deconvolution (ACYCBD) and AdaBoost-Mixed Kernel Relevance Vector Machine. Firstly, CYCBD para...
The probability density function (pdf) valid for the Gaussian case is often applied for describing the convolutional noise pdf in the blind adaptive deconvolution problem, although it is known that it can be applied only at the latter stages of the d...
Ocean Acoustic Waveguide Remote Sensing (OAWRS) typically utilizes large-aperture linear arrays combined with coherent beamforming to estimate the spatial distribution of acoustic scattering echoes. The conventional maximum likelihood deconvolution (...
A deconvolution method is proposed for conduction block (CB) estimation based on two compound muscle action potentials (CMAPs) elicited by stimulating a nerve proximal and distal to the region in which the block is suspected. It estimates the time de...
Tumor-infiltrating immune cells (TIICs) form a critical part of the ecosystem surrounding a cancerous tumor. Recent advances in radiobiology have shown that, in addition to damaging cancerous cells, radiotherapy drives the upregulation of immunosuppr...
This paper shows that using the Padé–Laplace (PL) method for deconvolution of multi-exponential functions (stress relaxation of polymers) can produce ill-conditioned systems of equations. Analysis of different sets of generated data points from known...
In the field of ultrasonic nondestructive testing (NDT), robust and accurate detection of defects is a challenging task because of the attenuation and noising of the ultrasonic wave from the structure. For determining the reflection characteristics r...
Various studies have been conducted to reduce the blurring caused by movement in cine magnetic resonance imaging (MRI) of the heart. This study proposed a blind deconvolution method using a total variation regularization algorithm to remove blurring...
Periodic structures that may exist within the neutron imaging detector can introduce periodic noise into the imaging results, directly degrading image quality and further affecting the performance of deconvolution. This periodic noise appears as four...
Mechanical amorphization of three chitosan samples with high, medium, and low molecular weight was studied. It is shown that there are no significant differences between the course of amorphization process in a planetary ball mill of chitosan with di...
The classical least-squares migration (LSM) translates seismic imaging into a data-fitting optimization problem to obtain high-resolution images. However, the classical LSM is highly dependent on the precision of seismic wavelet and velocity models,...
This study involves the use of high-resolution airborne magnetic data to evaluate the thicknesses of sedimentary series in the Bornu Basin, Northeast Nigeria, using three depth approximation techniques (source parameter imaging, standard Euler deconv...
Matched filtering is widely used in active sonar because of its simplicity and ease of implementation. However, the resolution performance generally depends on the transmitted waveform. Moreover, its detection performance is limited by the high-level...
12 February 2021
Blind deconvolution of light microscopy images could improve the ability of distinguishing cell-level substances. In this study, we investigated the blind deconvolution framework for a light microscope image, which combines the benefits of bi-l0-l2-n...
A horizontal towed linear coherent hydrophone array is often employed to estimate the spatial intensity distribution of incident plane waves scattered from the geological and biological features in an ocean acoustic waveguide using conventional beamf...
The dwell time algorithm is one of the key technologies that determines the accuracy of a workpiece in the field of ultra-precision computer-controlled optical surfacing. Existing algorithms mainly consider meticulous mathematics theory and high conv...
Sparse spikes deconvolution is one of the oldest inverse problems, which is a stylized version of recovery in seismic imaging. The goal of sparse spike deconvolution is to recover an approximation of a given noisy measurement
An extracellular matrix protein, fibronectin (Fn), was covalently immobilized on 316L stainless steel, L605 cobalt chromium (CoCr), and nickel titanium (NiTi) surfaces through an 11-mercaptoundecanoic acid (MUA) self-assembled monolayer (SAM) pre-for...
Background/Objectives. This research supports the development of long-acting injectables (LAIs) via in situ gel (ISG) technology by illustrating the influence of drug properties and formulation variables on in vitro drug release (Part 1), and providi...
Magnetic and electromagnetic techniques have been applied successfully to mineral exploration discovery. Both techniques rely on inferring the distribution of subsurface physical properties based on ground, airborne or borehole field measurements. Co...
Background: Meningiomas are common intracranial tumors in adults. Most are benign WHO grade I (GI) tumors, while approximately 20% are diagnosed as more aggressive WHO grade II (GII) and grade III (GIII) meningiomas. The study aimed to identify genes...
This study investigates the mechanical performance of a pulsed laser butt-welded IN792 DS joint and its relationship to its microstructure by means of grid nanoindentation. A new ISE-free (rate-derived) hardness parameter (HR) has been introduced to...
Advanced oxidation processes (AOPs) are considered efficient treatment methods owing to the high reactivity of the oxidizing species they generate. However, in multicomponent mixtures, individual dyes may exhibit different apparent decolorization kin...
The kinematic source rupture process of the 2016 Meinong earthquake (Mw = 6.4) in Taiwan was derived from apparent source time functions retrieved from teleseismic S-waves by using a refined homomorphic deconvolution method. The total duration of the...
This article discusses the possibilities of two methods for monitoring Physical Vapor Deposition (PVD) process parameters: multi-grid probe, which makes it possible, in particular, to determine the energy distribution of ions of one- or two-component...
To address the challenge of extracting fault features and accurately identifying bearing fault conditions under strong noisy environments, a rolling bearing failure diagnostic technique is presented that utilizes parameter-optimized maximum second-or...
Hyperspectral imaging (HSI) provides rich spatial and spectral information for remote sensing, mineral exploration, and biomedical analysis, but its limited spatial resolution and sensor imperfections lead to blurred, noisy, and mixed-pixel observati...
Background: Cyclosporin A (CyA) is widely investigated for ophthalmic drug-delivery systems, including hydrogel contact lenses, where reliable quantification is essential for evaluating drug loading, release, and formulation performance. However, the...
Ultrasound imaging is widely used as a noninvasive lesion detection method in diagnostic medicine. Improving the quality of these ultrasound images is very important for accurate diagnosis, and deep learning-based algorithms have gained significant a...
When a minor DNA component to a binary mixture is present at a weight ratio of approximately 1:50 or less, the presence of this minor donor is undetectable (or barely detectable) by standard mixture deconvolution approaches. In an attempt to retrieve...
Single-channel seismic (SCS) methods play a crucial role in offshore wind farm assessments, offering rapid and continuous imaging of the subsurface. Conventional SCS methods often fall short in resolution and signal completeness, leading to potential...
To reduce the maintenance cost and safeguard machinery operation, remaining useful life (RUL) prediction is very important for long term health monitoring. In this paper, we introduce a novel hybrid method to deal with the RUL prediction for health m...
Aerial radiation surveys produce sparse trajectories that must be reconstructed into contamination maps. Conventional aerial interpolators—inverse distance weighting (IDW) and ordinary kriging—treat observations as local ground samples, i...
Due to bacterial mutation and evolution to survive and to the misuse of antibiotics, there is greater resistance to different medications among different bacteria. This study presents the modification of ZnO nanoparticles with L-serine via ultrasound...
Reliable determination of cellulose crystallinity is essential for biomass valorization, yet commonly used analytical methods may respond differently to residual non-cellulosic components present in partially purified lignocellulosic materials. In th...
The Groningen gas field in the Netherlands is an ideal test bed for in-situ reservoir monitoring techniques because of the availability of both active and passive in-reservoir seismic data. In this study, we use deconvolution interferometry to estima...
Image blurs are a major source of degradation in an imaging system. There are various blur types, such as motion blur and defocus blur, which reduce image quality significantly. Therefore, it is essential to develop methods for recovering approximate...
The 1H DQ Fourier and Laplace-like spectra for a series of cross-linked natural rubber (NR) samples naturally aged during six years are presented and characterized. The DQ build-up curves of these samples present two peaks which cannot be described b...
Noise and blurring in light microscope images are representative factors that affect accurate identification of cellular and subcellular structures in biological research. In this study, a method for l1-norm-based blind deconvolution after noise redu...
In this study, thermogravimetric analysis (TGA) was coupled with Fourier-transform infrared (FTIR) spectroscopy to systematically investigate the pyrolysis characteristics and mechanisms of cement fiberboard across varying heating rates. Experimental...
In airborne sensing applications, radar forward-looking imaging is a crucial technology for high-resolution ground mapping and terrain perception. Super-resolution deconvolution is key to overcoming the real-beam resolution limits of these airborne s...
Efficient identification of chemical probes for the manipulation and understanding of biological systems demands specificity for target proteins. Computational means to optimize candidate compound selection for experimental selectivity evaluation are...
The environment model for the description of the location of carbonate ions in apatites predicts that approximately half of the carbonate occupies the apatite channel. This model relies on the influence of entities surrounding the carbonate on its IR...
Meta-analytic deconvolution seeks to recover the distribution of true effects from noisy site-specific estimates. While Efron’s log-spline prior provides an elegant empirical Bayes solution with excellent point estimation properties, its plug-i...
In modern radiation sensor systems, the analog output of charge-sensitive preamplifiers (CSA) often suffers from long exponential tails, which severely limit the performance of the sensor system at high counting rates. At high counting rates in nucle...
of 2