Skip to Content
SensorsSensors
  • Article
  • Open Access

28 February 2025

20 Pages

An Optimized Maximum Second-Order Cyclostationary Blind Deconvolution and Bidirectional Long Short-Term Memory Network Model for Rolling Bearing Fault Diagnosis

,
,
,
,
,
and
1
School of Automation, Guangdong University of Petrochemical Technology, Maoming 525000, China
2
School of Information and Control Engineering, Jilin Institute of Chemical Technology, Jilin 132022, China
3
School of Computer Science, Baicheng Normal University, Baicheng 137000, China
*
Author to whom correspondence should be addressed.

Abstract

To address the challenge of extracting fault features and accurately identifying bearing fault conditions under strong noisy environments, a rolling bearing failure diagnostic technique is presented that utilizes parameter-optimized maximum second-order cyclostationary blind deconvolution (CYCBD) and bidirectional long short-term memory (BiLSTM) networks. Initially, an adaptive golden jackal optimization (GJO) algorithm is employed to refine important CYCBD parameters. Subsequently, the rolling bearing failure signals are filtered and denoised using the optimized CYCBD, producing a denoised signal. Ultimately, the noise-reduced signal is fed into the BiLSTM model to realize the classification of faults. The experimental findings demonstrate the suggested approach’s strong noise reduction performance and high diagnostic accuracy. The optimized CYCBD–BiLSTM improves the accuracy by approximately 9.89% compared with other methods when the signal-to-noise ratio (SNR) reaches −9 dB, and it can be effectively used for diagnosing rolling bearing faults under noisy backgrounds.

Article Metrics

Citations

Article Access Statistics

Multiple requests from the same IP address are counted as one view.