Skip to Content

431 Results Found

  • Article
  • Open Access
8 Citations
2,657 Views
14 Pages

21 May 2021

Determining the appropriate boundary conditions of a structure is a very important aspect in the failure analysis. In experimental tests, the method of compressing composite samples significantly influences the obtained results. In numerical studies,...

(This article belongs to the Special Issue Computational Mechanics of Structures and Materials)
  • Article
  • Open Access
1 Citations
1,261 Views
21 Pages

31 December 2025

The seismic performance of a proposed bolted angle connector beam-to-column joint with a stiffener (hereinafter referred to as a BACS joint) was investigated utilizing quasi-static tests on six specimens with H-shaped steel members. The failure modes...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
3 Citations
3,774 Views
25 Pages

Seismic Fragility of a Multi-Frame Box-Girder Bridge Influenced by Seismic Excitation Angles and Column Height Layouts

  • Tong Wu,
  • Luyao Wang,
  • Liyang Zhao,
  • Gangping Fan and ,
  • Jiahui Wang,
  • Lihui Yin,
  • Shuang Zhang and
  • Shengchun Liu
  • + 3 authors+ 0 author

Curved multi-frame box-girder bridges with hinges are widely used in the United States due to the large spanning capacity, construction simplification and construction cost economy. This type of bridge frequently has the characteristics of column hei...

(This article belongs to the Topic Advances in Dynamics of Building Structures)
  • Article
  • Open Access
1 Citations
1,835 Views
33 Pages

18 August 2025

Staggered floor frame structures with good spatial adaptability are widely used in large-space civil buildings such as conference halls and terminal buildings. However, the short columns formed by staggered floor slabs significantly affect load trans...

  • Article
  • Open Access
3 Citations
3,270 Views
21 Pages

In recent years, cold-formed steel has been widely used in prefabricated steel structures, and the common cross-section forms are mainly complex lipped angle sections. However, there is a lack of design guidance for such a cross-section due to the co...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
4 Citations
4,606 Views
17 Pages

The Influence of Static Pressure on Bubble Size and Contact Angle of Quartz: Mimicking What May Happen Inside a Hypothetical Flotation Column

  • Alexandre Vale Oliveira,
  • José Tadeu Gouvêa Junior,
  • Thiago Cesar Souza Pinto and
  • Laurindo de Salles Leal Filho

16 March 2023

This paper addresses the influence of hydrostatic pressure (Phyd) on bubble diameter (db) and contact angle (θ) of quartz in pure water versus collector solution (Flotigam® EDA, γLG = 57 mN/m) at 20 °C. The pressure range (0–300 kPa) applied against...

  • Letter
  • Open Access
15 Citations
3,015 Views
11 Pages

18 September 2020

This paper analyzes the digital modelling of radiance reflectance of the sea surface when the water column is polluted by oil-in-water emulsion. A method tracking the fate of two billion virtual solar photons was applied to obtain the angular distrib...

(This article belongs to the Section Remote Sensors)
  • Article
  • Open Access
2 Citations
1,850 Views
22 Pages

An Experimental Evaluation of Steel Beam-HSST/CFSST Column Connection with Varying Joint Configurations

  • Zongmin Zhang,
  • Lanhua Chen,
  • Ling Cai,
  • Yanchun Li and
  • Zaharah Mohd Yusoff

19 October 2025

Sixteen beam–column joints with different column types and connection configurations were designed and tested to identify suitable joints for low-rise prefabricated square steel tube (SST) columns and H-beams. The columns included hollow square...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
1 Citations
2,568 Views
17 Pages

21 July 2022

In order to study the mechanical performance and friction slip mechanism of the interface of a composite timber column under inclined deformation, the unilateral contact mechanical model of an ancient composite timber column under inclined deformatio...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
2 Citations
1,162 Views
20 Pages

Experimental Research and Numerical Simulation on the Hysteresis Performance of Strengthened Beam–Column Joints

  • Xiuying Yang,
  • Yanling Li,
  • Shixin Duan,
  • Guodong Zhao and ,
  • Jie Song and
  • Denghu Jing
  • + 1 author+ 0 author

23 April 2025

Beam–column joints in reinforced concrete frames are subjected to complex forces and are prone to damage under seismic actions. This paper proposes a method to strengthen beam–column joints using angle steel and split bolts. The hystereti...

(This article belongs to the Special Issue Advanced Studies on Steel Structures)
  • Article
  • Open Access
16 Citations
4,360 Views
17 Pages

7 February 2022

Reinforced concrete (RC) columns of old existing buildings are vulnerable to earthquakes because the hoops comprising their transverse reinforcement are widely spaced and anchored using 90° hooks. This study extensively evaluated the seismic beha...

(This article belongs to the Special Issue Structural Methods and Architectural Designs with Recent Technologies on Concrete, Steel, Woven, Fiber Cementitious and Composite Materials)
  • Article
  • Open Access
4 Citations
4,382 Views
17 Pages

In this study, an innovative fabricated angle bracket connection for joining cold-formed steel structures is presented and investigated. The innovation lies in the especially designed and manufactured angle bracket and in the method of connecting the...

(This article belongs to the Special Issue Structural Performance of Cold-Formed Steel Structures)
  • Article
  • Open Access
2 Citations
1,135 Views
21 Pages

Research on the Spatial Torsional Effect of Column-Supported Structural Silo Groups Based on Shaking Table Tests

  • Huifen Wang,
  • Yonggang Ding,
  • Xuesen Li,
  • Guoqi Ren and ,
  • Zhiyao Zhou and
  • Qikeng Xu
  • + 1 author+ 0 author

Food security is a critical component of national security. Grain silos, as key infrastructure for food storage, must remain structurally resilient under seismic actions to ensure the stability of grain reserves. However, column-supported vertical-gr...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
4 Citations
1,477 Views
16 Pages

10 September 2025

This study proposes a precast concrete bridge pier system designed to enhance seismic resilience and post-earthquake reparability. The structural configuration integrates ultra-high-performance concrete (UHPC), externally replaceable steel-angle ener...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
4 Citations
3,827 Views
21 Pages

25 October 2022

This paper proposes a novel type of steel angle-corrugated steel plate-confined concrete column (SA-CS column). The axial compression behavior of the SA-CS column was investigated by load experiments and finite element (FE) simulation. The study also...

(This article belongs to the Special Issue Structural Design and Analysis for Constructions and Buildings)
  • Article
  • Open Access
12 Citations
3,572 Views
22 Pages

14 April 2023

With the growing demand for the bearing capacity of columns, large-section angle steel (LAS) columns have been widely adopted. Q345 is the most commonly used steel, but research on the axial compression stability of LAS columns mainly focuses on stee...

(This article belongs to the Special Issue High Performance Steel Structures)
  • Article
  • Open Access
18 Citations
2,895 Views
32 Pages

Effect of Stiffeners on the Axial Strength of Face-to-Face Unequal-Angle Cold-Formed Steel Columns

  • Beulah Gnana Ananthi Gurupatham,
  • Krishanu Roy and
  • James Boon Piang Lim

30 December 2024

Cold-formed steel (CFS) unsymmetrical angles are increasingly used in structural applications such as portal frames, roof trusses, and transmission towers. However, research on built-up face-to-face unsymmetrical CFS angle columns (FFUACs) with stiff...

(This article belongs to the Special Issue Cold-Formed Steel Structures)
  • Article
  • Open Access
3 Citations
2,197 Views
17 Pages

18 April 2025

The original Glancing Angle Deposition (GLAD) technique was developed using the evaporation process, i.e., in high vacuum, with a nearly punctual source, and with the substrate aligned with the source axis. In this specific case, the substrate tilt a...

(This article belongs to the Special Issue Advances and Innovations in Glancing Angle Deposition and Related Nanostructures)
  • Article
  • Open Access
4 Citations
3,513 Views
23 Pages

Comparison of Methods for Short-Segment Posterior Stabilization of Lumbar Spine Fractures and Thoracolumbar Junction

  • Agnieszka Tomczyk-Warunek,
  • Michał Kłapeć,
  • Rudolf Blicharski,
  • Sławomir Dresler and ,
  • Ireneusz Sowa,
  • Andrea Weronika Gieleta,
  • Tomasz Skrzypek,
  • Magdalena Lis,
  • Waldemar Kazimierczak and
  • Tomasz Blicharski
  • + 5 authors+ 0 author

2 December 2024

Background: Thoracolumbar and lumbar spine injuries account for 30–60% of spinal fractures, especially at the thoracolumbar junction. Conservative treatment is recommended for stable fractures without neurological symptoms, but studies suggest...

(This article belongs to the Section Orthopedics)
  • Article
  • Open Access
15 Citations
4,784 Views
11 Pages

29 October 2020

Glass fiber reinforced polymers (GFRP), with their advantage of corrosion resistance, have potential to be used as structural members in civil engineering constructions. Pultruded GFRP angle section trusses could be used instead of steel sections in...

(This article belongs to the Section Polymer Applications)
  • Article
  • Open Access
5 Citations
3,561 Views
19 Pages

16 September 2022

Atomization of liquid into the air attained through submerged ultrasound irradiation will involve the formation of liquid fountain, which exhibits a sequence of oscillating and/or intermittent characteristics/events: its vertical/axial growth and bre...

  • Article
  • Open Access
4 Citations
2,577 Views
11 Pages

11 November 2019

The theoretical prediction models of contact angle were constructed by considering the interface free energy. Then, the square column structure on monocrystalline silicon was fabricated using micro-milling. The rationality of prediction models was va...

  • Article
  • Open Access
8 Citations
18,681 Views
20 Pages

Experimental Study on Performance of Steel Fiber-Reinforced Concrete V-Shaped Columns

  • Rafea F. Hassan,
  • Nabeel H. Al-Salim,
  • Nisreen S. Mohammed and
  • Husam H. Hussein

14 December 2021

Structural engineers have used V-shaped columns based on technical requirements. The inclination of the V-shaped column underlines the individual purpose of the base floor. However, there is no any specification or guidance on the design of V-shaped...

(This article belongs to the Collection Innovative Structures and Materials: Analysis, Design and Application)
  • Article
  • Open Access
7 Citations
2,177 Views
15 Pages

Study on Enhanced Heat Transfer of the Convex Columns in the Cooling Channel of Motorized Spindle Based on Field Synergy

  • Yang Li,
  • Zhe Nie,
  • Dongxu Su,
  • Jingyao Tian and ,
  • Wenlei He and
  • Wanhua Zhao
  • + 1 author+ 0 author

12 August 2023

The cooling performance of motorized spindles plays an important role in accuracy in high-speed machining. Aiming at improving the cooling performance of traditional motorized spindles, convex columns were built in the cooling channel. Based on field...

(This article belongs to the Special Issue High-Performance Machining Processes: From Mechanisms to Equipment)
  • Article
  • Open Access
287 Views
27 Pages

Continuous Characterization of Water-Column Velocity in Cold Seep Plumes Using Pre-Stack Allied Elastic Impedance Inversion

  • Canping Li,
  • Miantao Ma,
  • Rui Wang,
  • Hairong Zhang and ,
  • Yilin Liu,
  • Liang Chang,
  • Jinqiang Liang,
  • Fengying Chen and
  • Binghuang Bao
  • + 4 authors+ 0 author

12 September 2026

Bubbles in submarine cold-seep plumes cause strong scattering, attenuation, and poor continuity in water-column seismic responses, hindering continuous two-dimensional characterization of acoustic properties. Using multichannel seismic data from the...

(This article belongs to the Section Geological Oceanography)
  • Article
  • Open Access
5 Citations
2,863 Views
22 Pages

Study of the Mechanical Properties of Beam-Column Joints in a New Type of Aluminum Alloy Portal Frame

  • Zhanqing Xing,
  • Gang Wang,
  • Xiaolin Lin,
  • Jing Pang and ,
  • Caiqi Zhao and
  • Qiaosheng Chen
  • + 1 author+ 0 author

26 October 2023

In the article, the semi-permanent aluminum alloy portal frame is used as the research background, beam-column joints are used as the research object, and experimental and numerical analyses are carried out. The influence of different bolt diameters...

(This article belongs to the Special Issue Disaster Mitigation, Risk Reduction, and Resilience Design of Engineering Structures)
  • Article
  • Open Access
1 Citations
2,467 Views
14 Pages

29 April 2021

Based on the contact angle prediction model of a traditional square column structure, the prediction models for wettability of a parallelogram square column structure (PSCS) on polymethyl methacrylate (PMMA) surface prepared by femtosecond laser were...

(This article belongs to the Section Surface Characterization, Deposition and Modification)
  • Article
  • Open Access
875 Views
27 Pages

9 January 2026

Existing studies have demonstrated that insufficient horizontal deformation capacity of columns under high axial compression ratios constitutes a key factor leading to seismic damage in ordinary concrete frame structures. This paper proposes a novel...

(This article belongs to the Special Issue Research on Structural Analysis and Design of Civil Structures—2nd Edition)
  • Article
  • Open Access
6 Citations
3,238 Views
10 Pages

Microstructure-Induced Anisotropic Optical Properties of YF3 Columnar Thin Films Prepared by Glancing Angle Deposition

  • Yao Shan,
  • Pian Liu,
  • Yao Chen,
  • Haotian Zhang and ,
  • Huatian Tu,
  • Yuxiang Zheng,
  • Rongjun Zhang,
  • Songyou Wang,
  • Jing Li and
  • Liangyao Chen
  • + 5 authors+ 0 author

3 December 2020

Yttrium fluoride (YF3) columnar thin films (CTFs) were fabricated by electron beam evaporation with the glancing angle deposition method. The microstructures and optical properties of YF3 CTFs were studied systematically. The YF3 films grown at diffe...

(This article belongs to the Special Issue Nanomaterials and Nanotechnology in Experimental Photonics)
  • Article
  • Open Access
9 Citations
3,274 Views
26 Pages

L-shaped concrete-filled steel tubular (CFST) columns, a kind of structural member appropriate for high-rise buildings, not only avoid the defect of conventional square columns protruding from the wall but also have the green and low-carbon propertie...

(This article belongs to the Special Issue Advances in Steel–Concrete Composite Structures)
  • Article
  • Open Access
1,227 Views
24 Pages

26 December 2025

As the requirements for structural functionality increase, designers frequently opt for inclined columns instead of traditional vertical columns. This choice enhances the spatial dynamics, esthetic appeal, and lighting effects of the structure. Howev...

(This article belongs to the Section Building Structures)
  • Article
  • Open Access
451 Views
16 Pages

Study of the Dynamic Characteristics of Simulated Droplet Particles in Hydro-Jet Cyclone Based on CFD-DPM

  • Yao Zhang,
  • Yong Yu,
  • Zhi-Bin Zhou,
  • Zheng-Hao Yang and ,
  • Yu-Long Chang,
  • Li-Wang Wang and
  • Ben-Shuai Guo
  • + 2 authors+ 0 author

The complex behavior of multi-scale droplets in Hydro-jet Cyclone (HJC) systems constrains the parametric study of gas–liquid separation and interfacial transfer. To investigate droplet dynamics at a specific scale in swirling flows, this study...

(This article belongs to the Section Environmental Separations)
  • Article
  • Open Access
5 Citations
2,914 Views
26 Pages

A numerical model of 84 high-strength concrete-filled square steel tubular columns (HSCFST) with local defects is developed using ABAQUS. The effects of parameters such as crack angle, crack length, impact surface and impact energy on the impact resi...

(This article belongs to the Special Issue Sustainability and Resiliency of Building Materials and Structures)
  • Article
  • Open Access
3 Citations
1,140 Views
21 Pages

21 December 2025

L-shaped concrete-filled steel tubular (CFST) columns have attracted increasing attention in recent years due to their favorable seismic performance and their ability to reduce column protrusions into interior wall surfaces. Existing studies on L-sha...

(This article belongs to the Special Issue The Challenges of and Research Trends in the Durability, Corrosion, and Cracking of Reinforced Concrete)
  • Article
  • Open Access
434 Views
25 Pages

The Structural Behavior of Encased Composite Columns Under Biaxial Loading Conditions

  • Hamza M. Salman,
  • Shatha D. Mohammed,
  • Teghreed H. Ibrahim,
  • Rafaa M. Abbas and
  • Abbas A. Allawi

10 October 2026

This study presents a theoretical investigation of encased composite columns under biaxial loading. The EUROCODE 4 theoretical model for generating the uniaxial interaction diagram was developed and used to meet biaxial requirements. The primary obje...

(This article belongs to the Section Composites Modelling and Characterization)
  • Article
  • Open Access
26 Citations
4,245 Views
20 Pages

14 November 2019

This study on hydrodynamic coefficients of a column-stabilized fish cage under wave action plays an important role in the anti-wave design of cages. The regular wave test was used to study the horizontal wave force of the jacket and column-stabilized...

(This article belongs to the Special Issue Modelling of Harbour and Coastal Structures)
  • Article
  • Open Access
18 Citations
4,624 Views
27 Pages

6 January 2023

Vortex-induced motion (VIM) is a critical issue for floating structures made of one or more columns, due to its significant impacts on their operational stability. Supported by column-type floating platforms, floating offshore wind turbines (FOWTs) m...

(This article belongs to the Special Issue Recent Advances in Offshore Wind Turbines)
  • Article
  • Open Access
7 Citations
3,434 Views
17 Pages

14 February 2023

The stability of the embankment’s slopes is a critical aspect of geotechnical engineering and it is essential to guarantee the effectiveness of the factor of safety to prevent any potential failures in the slope both during and post-constructio...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
3 Citations
4,836 Views
10 Pages

14 October 2020

Columnar buckling is a ubiquitous phenomenon that occurs in both living things and man-made objects, regardless of the length scale ranging from macroscopic to nanometric structures. In general, analyzing the post-buckling behavior of a column requir...

(This article belongs to the Section Mechanical Engineering)
  • Article
  • Open Access
5 Citations
4,175 Views
23 Pages

30 January 2024

Multibeam echosounders, as the most commonly used bathymetric equipment, have been widely applied in acquiring seabed topography and underwater sonar images. However, when interference occurs in the water column, traditional bottom detection methods...

(This article belongs to the Section Remote Sensing Image Processing)
  • Article
  • Open Access
17 Citations
4,350 Views
17 Pages

2 June 2022

Our study investigates the geotechnical engineering properties of cement fly ash gravel mixtures in the laboratory. Gravels with three different size ranges were blended with cement and fly ash. The mixture properties were investigated, including the...

(This article belongs to the Section Construction and Building Materials)
  • Article
  • Open Access
2 Citations
3,905 Views
13 Pages

6 June 2023

The aim of this study was to examine the effective length factor of frame–core wall structures with cross-layer columns, which are relevant for current high-rise building construction. Using the finite element method, improved inflection point...

(This article belongs to the Section Civil Engineering)
  • Article
  • Open Access
11 Citations
3,981 Views
25 Pages

29 March 2023

In order to study the bearing characteristic of the geosynthetic-encased stone column (GESC) on the composite foundation, a series of field tests and numerical simulation were carried out on the composite foundations reinforced by the traditional sto...

(This article belongs to the Special Issue Enhancing Subgrade Stability in Complex Environment for Sustainable Road)
  • Article
  • Open Access
1 Citations
1,165 Views
20 Pages

16 April 2025

Concrete-filled steel tube (CFST) columns reinforced with latticed steel angles (LSA), referred to as CFST-LSA columns, have been widely adopted in practical engineering. Understanding their mechanical behavior under eccentric loading is crucial for...

(This article belongs to the Section Building Structures)
  • Feature Paper
  • Article
  • Open Access
22 Citations
3,952 Views
17 Pages

Microstructure Dependence of Effective Thermal Conductivity of EB-PVD TBCs

  • Shi-Yi Qiu,
  • Chen-Wu Wu,
  • Chen-Guang Huang,
  • Yue Ma and
  • Hong-Bo Guo

7 April 2021

Microstructure dependence of effective thermal conductivity of the coating was investigated to optimize the thermal insulation of columnar structure electron beam physical vapor deposition (EB-PVD coating), considering constraints by mechanical stres...

(This article belongs to the Section Advanced Materials Characterization)
  • Article
  • Open Access
12 Citations
4,386 Views
12 Pages

A Powerful Build-Up Rate (BUR) Prediction Method for the Static Push-the-Bit Rotary Steerable System (RSS)

  • Yucai Shi,
  • Zhixiang Teng,
  • Zhichuan Guan,
  • Jing Bai and ,
  • Wei Lv,
  • Hualin Liao,
  • Yuqiang Xu and
  • Yongwang Liu
  • + 3 authors+ 0 author

16 September 2020

The RSS has been widely used in directional drilling. In order to enhance wellpath control accuracy and efficiency of the static push-the-bit RSS, a powerful BUR prediction method is reconstructed by coupling a rotary steerable bottom-hole assembly (...

(This article belongs to the Section K: State-of-the-Art Energy Related Technologies)
  • Technical Note
  • Open Access
1,460 Views
12 Pages

15 November 2024

Background: The aim of this study was to show that virtual surgical planning (VSP) and printed anatomical models support the reconstruction of the center of rotation (COR) and pelvic BRIM during revision hip surgery using a dual-mobility revision cup...

(This article belongs to the Special Issue Computed Tomography Imaging in Medical Diagnosis)
  • Article
  • Open Access
2 Citations
4,246 Views
15 Pages

20 October 2018

Droplet manipulation by light-induced isomerization was numerically demonstrated and investigated regarding the driving mechanism. Such a non-invasive manipulation of a droplet in a microchannel can be realized, for example, by the use of watery solu...

(This article belongs to the Special Issue Microscale Surface Tension and Its Applications)
  • Article
  • Open Access
5 Citations
3,817 Views
15 Pages

Ground-Based MAX-DOAS Measurements of Tropospheric Aerosols, NO2, and HCHO Distributions in the Urban Environment of Shanghai, China

  • Haoyue Wang,
  • Wanlin Wei,
  • Huizheng Che,
  • Xiao Tang and ,
  • Jianchun Bian,
  • Ke Yu and
  • Weiguo Wang
  • + 2 authors+ 0 author

3 April 2022

Aerosol extinction profiles at 550 nm were retrieved by applying multi-axis differential optical absorption spectroscopy (MAX-DOAS) and lookup table. Then the tropospheric NO2 and HCHO vertical column densities were retrieved using a two-step method...

(This article belongs to the Special Issue Characterizing Atmospheric and Marine Boundary Layer Processes by Remote Sensing)
  • Article
  • Open Access
1 Citations
3,557 Views
16 Pages

3D Volumetric Tensor Velocity Imaging with Low Computational Complexity Using a Row-Column Addressed Array

  • Kseniya Chetverikova,
  • Jørgen Arendt Jensen,
  • Marie Sand Traberg and
  • Matthias Bo Stuart

21 June 2021

A method for volumetric Tensor Velocity Imaging employing row-column (RC) addressed array with low computational complexity is investigated in simulations. An interleaved and non-interleaved sliding aperture sequence with 11 rows and 11 columns emiss...

(This article belongs to the Topic Medical Image Analysis)

of 9