- Article
The influence of star-shaped (PAA-SS) and linear polyacrylic acid (PAA) with different molecular weights (high—PAA-HMW and low—PAA-LMW) on the structure of the adsorption layer, adsorption amount, electrokinetic and stabilizing properties...
The influence of star-shaped (PAA-SS) and linear polyacrylic acid (PAA) with different molecular weights (high—PAA-HMW and low—PAA-LMW) on the structure of the adsorption layer, adsorption amount, electrokinetic and stabilizing properties...
Iron oxides such as magnetite and maghemite coated with cetyltrimethylammonium bromide (CTAB) are very promising materials for wastewater treatment because iron oxide can be easily separated from solutions using the magnetic separation procedure Iron...
Microbial attack, particularly fungal degradation of cellulose, is a leading cause of paper damage. To address fungal spores and the rising concern of microbial drug resistance, a nano-Germanium dioxide (GeO2)/cetyltrimethylammonium bromide (CTAB) co...
A new NO2 nanohybrid of a gas sensor (CTAB-MoS2/rGO) was constructed for sensitive room-temperature detection of NO2 by 3D molybdenum disulfide (MoS2) and reduced graphene oxide (rGO), assisted with hexadecyl trimethyl ammonium bromide (CTAB). In com...
For deep purification of wastewater containing anionic dyes. In this study, cetyltrimethylammonium bromide (CTAB)-modified geopolymer-based hectorite was synthesized via a steam-assisted method using depolymerized illite-based geopolymer as the silic...
This work reports a detailed investigation of the micellization of the cationic surfactant cetyltrimethylammonium bromide (CTAB) over the temperature range of 290–313 K. Conductometry, tensiometry, fluorimetry, and isothermal titration calorime...
In this work, a tomato biochar composite modified with cetyltrimethylammonium bromide (CTAB@TBC) was successfully synthesized using an ethanol solution method. It was comprehensively characterized to evaluate its morphology (SEM), crystal structure (...
Polyethylenimine (PEI)-based solid amine adsorbents are commonly limited by pore blockage caused by PEI aggregation, low amine utilization in dilute CO2, and slow adsorption kinetics. Herein, PEI was impregnated into HP20 macroporous resin, and cetyl...
The electrochemical water splitting process represents a promising and sustainable route for generating high-purity hydrogen with minimal environmental impact. The development of efficient and economically viable electrocatalysts is crucial for enhan...
Fines migration is a common problem in the oil and gas industry that causes a decrease in productivity. In this sense, the main objective of this study is to develop nanocomposites based on the interaction of quaternary amine (hexadecyltrimethylammon...
The distinct physicochemical characteristics of metal-free graphitic carbon nitride (g-C3N4) are gaining interest in various fields, including energy storage and conversion. However, the electrochemical performance of this material is constrained, ow...
Ammonium sulfate is typically employed as a leaching agent in the in situ leaching of weathered crust elution-deposited rare earth ore. However, it is associated with challenges such as low efficiency in mass transfer for rare earth (RE) leaching, hi...
This study investigates the suppression of galvanic corrosion between copper and gold using cetyltrimethylammonium bromide (CTAB) and betaine as inhibitors. When copper is electrically connected to gold in PCB etching solutions, the substantial diffe...
In order to remove and reuse the ecotoxic dye Eriochrome black T (EBT) from dyeing wastewater, we used a process called cetyltrimethylammonium bromide (CTAB)-assisted foam fractionation. By optimizing this process with response surface methodology, w...
Synthesis and applications of one dimensional (1D) metal nanostructures have attracted much attention. However, one-step synthesis of bimetallic nanowires (NWs) has remained challenging. In this work, we developed a microorganism-mediated, hexadecylt...
Porous ceramic pellets (PCPs) coated with silver nanoparticles (Ag NPs) have attracted considerable attention as surface-modified ceramic materials because they combine the structural stability of porous ceramics with the unique physicochemical prope...
Herein, a facile strategy was proposed to enhance the gas sensing performance of SnO2 for H2 by regulating its crystalline phase composition. Sn-based metal–organic framework (Sn-MOF) precursors with different morphologies were synthesized by i...
Efficient and consistent DNA extraction is crucial for genotyping but often hindered by the limitations of traditional manual processes, which are labour-intensive, error-prone, and costly. We introduce a semi-automated, robotic-assisted DNA extracti...
Cetyl trimethyl ammonium bromide (CTAB)-modified natural rubber latex/Portland cement paste (CTAB + NL/PC) composites were fabricated by varying the NL/cement and CTAB/cement ratios to improve the elastic property of PC. The stability and workability...
A hierarchical zeolite Beta has been prepared by a feasible one-pot and one-step method, which is suitable for application in industrial production. The synthesis is a simple hydrothermal process with low-cost raw materials, without adding alcohol or...
Methane hydrates were studied in systems containing aqueous dissolved surfactants in oil emulsions with a volume ratio of 40/60. Two commercial surfactants, named synperonic PE/F127 and cetyltrimethylammonium bromide, were evaluated at 0, 350, 700 an...
In this article, attapulgite (ATP) as a raw material, hexadecyltrimethylammonium bromide (CTAB) as a modifier, and chitosan (CTS) as a composite are used to prepare a natural mineral-based composite adsorbent CTAB-ATP/CTS for the adsorption of norflo...
Podophyllotoxin (PTOX) is naturally produced by the plant Podophyllum species. Some of its derivatives are anticancer drugs, which are produced mainly by using chemical semi-synthesis methods. Recombinant bacteria have great potential in large-scale...
Polylactic acid (PLA) is a good candidate for the manufacture of polymeric biodegradable biomaterials. The inclusion of metallic particles and surfactants solves its mechanical limitations and improves its wettability, respectively. In this work, cet...
Iron-based oxide catalysts for the NH3–SCR (selective catalytic reduction of NOx by NH3) reaction have gained attention due to their high catalytic activity and structural adjustability. In this work, iron–niobium, iron–titanate and iron–molybdenum c...
Micropillar array electrodes represent a promising avenue for enhancing detection sensitivity and response current. However, existing methods for depositing electrode materials on micropillar arrays often result in uneven distribution, with the thin...
Molybdenum disulfide (MoS2) was functionalized by cetyltrimethylammonium bromide (CTAB) through a one-pot hydrothermal technique, and subsequently, linear low-density polyethylene (LLDPE) composites were prepared. The attachment of alkyl chains of CT...
Anionic dyes with similar charge characteristics may exhibit substantially different adsorption behavior when competing for the same modified adsorbent surface. In this study, cetyltrimethylammonium bromide (CTAB)-modified wood biochar (CWBC) was eva...
The discharge of dye waste by industries has caused environmental impacts on water properties, aquatic species, and human life. The production of eco-friendly materials for dye removal from wastewater has gained increasing interest, particularly thro...
In this work, molecular dynamics simulations were performed to study the pH-induced structural transitions for a CTAB/p-toluic acid solution. Spherical and cylindrical micelles were obtained for aqueous surfactants at pH 2 and 7, respectively, which...
To date, Ag-based nanomaterials have demonstrated a high potential to overcome antibiotic resistance issues. However, bare Ag nanomaterials are prone to agglomeration in the biological environment, which results in a loss of antibacterial activity ov...
Collophane is difficult to upgrade by reverse flotation of quartz with amine collector alone due to its low grade, complex structure, fine dissemination grain size, etc. This investigation was conducted to explore the synergistic effect of dibutyl ph...
Rutin is a flavonoid glycoside compound, which is mainly transported via the blood circulation system in the human body. The monitoring of the blood concentration of rutin is of great significance in many fields such as pharmacology and pharmacokinet...
Nanofibers have potential applications as filters for particles with diameters <10 μm owing to their large specific surface area, macropores, and controllable geometry or diameter. The filtration efficiency can be increased by creating nanonets (&...
For the fast and simple sensing of the arsenic drug roxarsone (ROX), the development of a glassy carbon electrode (GCE) modified with cationic surfactant (cetyltrimethylammonium bromide, CTAB) material is critical. The CTAB-modified glassy carbon ele...
Supramolecular nanoparticles offer an efficient strategy to enhance the solubility, stability, and bioavailability of poorly water-soluble therapeutic molecules. In this study, water-dispersible SNPs were successfully prepared from dicarboxyl-bis-pil...
This report focusses on the modification of physical structure and chemical properties of a bentonite clay from the Hammam Boughrara region of the Maghnia district in western Algeria to maximize its adsorption capacity. The purified bentonite clay (c...
The direct discharge of cationic surfactants into environmental matrices has exponentially increased due to their wide application in many products. These compounds and their degraded products disrupt microbial dynamics, hinder plant survival, and af...
The effects of unmodified and modified bentonite nanoclays (with various degrees of surfactant modification) on the catastrophic phase inversion from water-in-oil (W/O) emulsion to oil-in-water (O/W) emulsion were determined experimentally. The bento...
The result of an adsorption experiment indicated that the pure magadiite (MAG) and the modified MAG via cetyltrimethylammonium-bromide (CTAB-MAG) possessed pronounced affinity to the Rhodamine-B (Rh-B) dye molecules. CTAB-MAG was synthesized with an...
In the present study, a new low-cost bioceramic nanocomposite based on porous hydroxyapatite (HAp) and cetyl trimethyl ammonium bromide (CTAB) as surfactant was successfully obtained by a simple chemical co-precipitation. The composition and structur...
A capacitive screen-printed electrode immunosensor operating in non-faradaic mode by dispensing redox probes was developed for the Coronavirus 2 Spike (S) protein. This new strategy enabled direct detection of the S protein by measuring changes in th...
Cu-based nanomaterials have received considerable attention as promising and cost-effective substrates for surface-enhanced Raman spectroscopy (SERS) applications despite their relatively low enhancement factor (EF) compared to noble metals like gold...
The formation of stable binary water-soluble sub-micellar aggregates of cetyltrimethylammonium bromide-copper-pyrocatechol violet complex (CTAB-Cu-PCV) diminishes the stability and absorbance of the Cu-PCV complex. A new flow injection spectrophotome...
Precise morphology engineering is essential for enhancing the charge-storage capabilities of cobalt molybdate (CoMoO4). In this study, cobalt molybdate (CoMoO4, abbreviated as CoMo), cobalt molybdate–cetyltrimethylammonium bromide (CoMo-CTAB),...
In this paper, the influence of alkyl trimethyl ammonium bromides (CnH2n+1(CH3)3NBr, n = 10, 12, 14, 16, 18, abbreviated as ATAB) on the formation of alpha calcium sulfate hemihydrate (α-CaSO4·0.5H2O) whiskers under a hydrothermal condition (135 °C,...
A series of mesoporous NiO catalysts with high specific surface area were prepared by a simple hydrothermal method and modified by cetyltrimethylammonium bromide (CTAB) as the crystal structure directing regent. The characterization with SEM, XRD, BE...
The low recovery of fine chalcopyrite particles and the limited Cu/Fe selectivity with conventional thiol collectors prompted the evaluation of a Polystyrene–Divinylbenzene–Cetyltrimethylammonium Bromide–Potassium Amyl Xanthate (PS-...
Nanoparticles have attracted considerable interest for biomedical and catalytic applications due to their unique functional properties. This study aims to evaluate the structural, optical, photoelectric, photocatalytic, and wound-healing performance...
The surface properties of nanoparticles have decisive influence on their interaction with biological barriers (i.e., living cells), being the concentration and type of surfactant factors to have into account. As a result of different molecular struct...
of 11